Hi All,
I hope this is the right place to post this.
I was looking at the BlackBerry PlayBook adv. where they talk about the BB Bridge.
I was wondering if anyone knew of an app for HoneyComb and GingerBread where the tablet would act like the LiveView from SE.
Basically if both the devices are on the same WiFi network, or via BlueTooth (BT), the SMS / Call information can be sent over to the Tablet.
We can make it interesting by using the tablet as a BT headset for the phone. or even a host for SMS.
This is all possible through BT, which works when you sync the phone to a GPS or other "Speaker Phone" Devices i.e. car stereos
Well.. had a friend that was determined to use BT for connecting to his computer.. I decided to see if I could get something working (as PC companion doesn't support BT for Xperia phones)
I finally managed to get sync working under Win7 by downloading a (less than legal..) copy of Toshiba Bluetooth Stack (this seems to work on most brand computers)
and then using "my phone explorer" (client app from market) and windows app downloaded from their site.. I am now able to share files, modify phone book, view phone status, send SMS etc from the laptop via BT.. (or Wifi.. or USB)
Apparently BlueSoleil also works instead of Toshiba bluetooth Stack..I havn't tried it myself.
The process was a little funky but It worked in the end and I can connect quite easy now.
Now why the hell can't Sony Erricson just fix BT on their Android devices! its really a step backwards in reguard to conectivity. Android really sucks with BT. but you would think SE could come up with a solution... what do they pay their developers for anyway? gimmie good BT implimentation over Timescape any day!
(its hard to tell friends who have just forked out hundreds on a phone I recomended that they can't use Bluetooth anymore, like they have been doing for years with their Nokia's and old pre android Sonyericssons)
My Rant.. hope it might help someone else in any case.
Kiwi
I have a aluminium apple bluetooth keyboard. When I connect it to my tablet I put in the passcode to pair it and then check the box to use it as an input device, but when I go to type anywhere it doesn't do anything and the touchscreen keyboard comes up. I have tried the tablet with a wired keyboard, which works fine.
Thats odd. Ive paired mine as you and when i press any key the internal keyboard goes off. Are you sure you have set it up as the default keyboard?
How do I do this? In language and input I can only choose standard keyboard as the default.
YOU must type the correct Numbercode and hit the Enter Button on the Keyboard. This works i hope
Hi everyone!
Dr.Dimes said:
YOU must type the correct Numbercode and hit the Enter Button on the Keyboard. This works i hope
Click to expand...
Click to collapse
I have an Apple Bluetooth Keyboard and want to use it with my Xperia Tablet S 32gb,
I input the 4 digit code and it pairs, but it doesn't input anything. Strangely, it works on my Xperia S mobile phone!
I posted here about it! http://forum.xda-developers.com/showthread.php?t=1908522
If you have any ideas, please can you post for me?
Ofiaich
Hey there, I do believe this comes down to incompatibilities with the version of bluetooth supported. Eg my my bluetooth mouse works on my laptop and galaxy s 2, but not my tablet s. My bluetooth key board which I know to be bluetooth 2.0 works fine on all. No idea what the mouse is, it was just a cheapo one with limited specs available. Wroks great on compatible devices though
Hi DreadPirateDan!
thanks for your reply,
DreadPirateDan said:
Hey there, I do believe this comes down to incompatibilities with the version of bluetooth supported. Eg my my bluetooth mouse works on my laptop and galaxy s 2, but not my tablet s. My bluetooth key board which I know to be bluetooth 2.0 works fine on all. No idea what the mouse is, it was just a cheapo one with limited specs available. Wroks great on compatible devices though
Click to expand...
Click to collapse
I understand a bit about Bluetooth Human Interface Device Profile (HID) and wonder if some genius has worked out a way to get these to work together..
But guess I will have to give up! I have the case with keyboard for the Xperia Tablet S but the viewing angle is not good for me. Maybe I will find a cheap Bluetooth keyboard.
The Sony one - http://www.sony.co.uk/product/other-sony-tablet-accessories/sgp-wkb1 is a bit too pricey!
Ofiaich
The Tablet S doesn't support Apple Bluetooth keyboard is because the kernel excluded module hid-apple. You can root your tablet to support it.
Sent from my LT26i using xda premium
Thanks WonderEkin!
WonderEkin said:
The Tablet S doesn't support Apple Bluetooth keyboard is because the kernel excluded module hid-apple. You can root your tablet to support it.
Click to expand...
Click to collapse
I not sure whether to root yet. Only experience is with my Samsung 7" tablet, and that must be 2 years ago now...
Then I am not sure how to add the correct Bluetooth profile!
Lots of reading and research to do!
Ofiaich
Both Bluetooth and Wifi OBD-II devices are supported by our headunits. Keep in mind that you get what you pay for with these devices and the cheap ebay ones aren't very reliable
OBD devices are only detected if broadcasting name contains OBD. There is a work around using petrows CarService
Please report back any that work for you
Wifi
- VGate iCar 2
Bluetooth
-
Wired (USB)
-
Note: If connecting to wifi device, you'll lose you access to the internet (wifi/3g)
Curious about how to resolve the problem I have with OBD.
I use an OBDLink LX, which is far and away one of the best you can use. Not a cheap Chinese knock-off and it has specific support in both Torque and Dashcommand.
On my MTC KLD unit, Torque detects the OBD device just fine. Torque just works with it, I didn't have to do anything.
However, Dashcommand does not reliably detect it. Dash Command is enumerating devices differently somehow, and just shows "paired device" for everything. I was able to randomly choose one once, and it worked. The next time, it wouldn't work on either one. I would MUCH prefer to use Dash Command, as Torque gives me wildly inaccurate readings (MPG, HP, Torque, all are way off despite using accurate profile information). Dash Command tech support insulted me by simply responding to read the user manual PDF.
Any ideas?
I've just got a "LUJII Mini OBD2 ELM327 V1.5 Bluetooth Car Scanner". Works ok with my phone, and in the Bluetooth menu it seems to pair. But then Torque says it is not paired even though I have the OBD sign in the top status bar.
Need to force the pairing inside of the torque app by selecting which OBD device and then it works ok.
lotherius said:
Curious about how to resolve the problem I have with OBD.
I use an OBDLink LX, which is far and away one of the best you can use. Not a cheap Chinese knock-off and it has specific support in both Torque and Dashcommand.
On my MTC KLD unit, Torque detects the OBD device just fine. Torque just works with it, I didn't have to do anything.
However, Dashcommand does not reliably detect it. Dash Command is enumerating devices differently somehow, and just shows "paired device" for everything. I was able to randomly choose one once, and it worked. The next time, it wouldn't work on either one. I would MUCH prefer to use Dash Command, as Torque gives me wildly inaccurate readings (MPG, HP, Torque, all are way off despite using accurate profile information). Dash Command tech support insulted me by simply responding to read the user manual PDF.
Any ideas?
Click to expand...
Click to collapse
same problem for me on my kld 3066 Torque is paired and working immediatly.
dashcommand pair OBDII BT device but always don't connect, i just found that OBDII connect to dashcommand 80% of the times if I force dashcommand to close from Apps list and that I restart the App
I write lot of mails to dashcommand about this problem (also because i buy), ...I send Debugs and so...but I still with the same problem
Am I gonna also lose connection to may hands free bluetooth if I get a bluetooth one?
I never had one of those and would like to know which one you recommend for a Rk3066 HU
Thanks.
I got this one off amazon and for 11 bucks it works 99% of the time. The only issue I have had is it reads wrong codes on Subaru but works fine on Toyota, Nissan and Kia so far.
Cant post links but this is close
amazon /gp/product/B00PJPHEBO?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
Hi all.....
I've got a SCANTOOL OBDLink LX connected to my AUDI S3 8P, and it's the fastest BT dongle i've ever seen.....it make about 45 Fps, when china's ELM make 10 Fps.....
Unfortunatly, the TP 2.0 protocol isn't available with a standard ELM327.....you just access to generic PIDs, so it's limited.....i'm working on it.
I also try a WBH BT5 dongle, witch should read the TP 2.0 with TORQUE......at the moment, i can't access to my ECU MED9.1 (but i can on KWP1281 EDC15P), i'm working on it too, with florian Help...
To paired with the WBH BT5, you need to override in Xposed MTC the dongle string name, and it work fine.
BR
SKOLS
Excellent product. http://www.amazon.co.uk/Pumpkin-Interface-Wireless-Diagnostic-Scanner/dp/B011O69946/
Mr Bigglesworth said:
I've just got a "LUJII Mini OBD2 ELM327 V1.5 Bluetooth Car Scanner". Works ok with my phone, and in the Bluetooth menu it seems to pair. But then Torque says it is not paired even though I have the OBD sign in the top status bar.
Need to force the pairing inside of the torque app by selecting which OBD device and then it works ok.
Click to expand...
Click to collapse
As an update, since I remove carservice this works much better, no need to force pairing everytime.
cimbike said:
Am I gonna also lose connection to may hands free bluetooth if I get a bluetooth one?
Click to expand...
Click to collapse
No you can bluetooth to more than one device at a time.
Anyone using VGate iCar v2 or v3 BT version? I wish to have one of these as they have automatic sleep mode so you can keep it plugged all the time without batt drain.
So I've tried both this adapter http://www.amazon.com/gp/product/B014MV03KY?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00 and this adapter http://www.amazon.com/gp/product/B005NLQAHS?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
And I can't get either of them connect to bluetooth. They both show up when you search for the adapter, but neither of them connect. They don't even give me the option to put in the PIN to have them connect. Has anyone ever had this kind of issue? If so what can I do to fix it?
SKOLSC said:
To paired with the WBH BT5, you need to override in Xposed MTC the dongle string name, and it work fine.
BR
SKOLS
Click to expand...
Click to collapse
What module do you use to override the name? I need to do this too for my Kiwi3 but I can't find the relevant settings anywhere.
countbuggula said:
What module do you use to override the name? I need to do this too for my Kiwi3 but I can't find the relevant settings anywhere.
Click to expand...
Click to collapse
Correction - I found the settings page finally - apparently I hadn't actually enabled xposed MTC. Once it was enabled and rebooted, I still haven't been able to get the device to show up at all in the bluetooth settings. I've tried:
K
k
Kiwi
KIWI
Kiwi 3
3
kiwi
KIW
kiw
Kiw
as well as leaving the field blank. Still nothing in the bluetooth settings. I can confirm that the device is on and connectable from my phone. Am I doing something wrong?
has anyone found an adapter that plays well with mtcb decks and 2001 f150's? i've tried 3 adapters and still haven't gotten one that does both. either the connect no problem to my deck but not to the ecu or they connect to ecu but its named "chx" instead of obd and won't connect to my deck. i did try using the xposed module to override but it never worked for me either.
Dear XDA members,
I am opening this thread in hope that the collective knowledge of XDA will help find a solution for a problem me and some other users are having with the GT1 and possibly other S912 tv boxes.
It seems that there is a problem on some devices, if not all, that when you connect a bluetooth keyboard or mouse to it, it appears as connected, but no input from the keyboard/mouse is seen.
The steps i tried so far are:
- usb mouse and keyboard are working
- tested on different official firmwares, custom ones and even ones from other manufacturers with same hardware (T95z,)
- tested with 3 different keyboards : RII i8+ (bt version), apple keyboard, tablet cover bt keyboard, and 2 mice: RII i8+ and apple mouse
- cat /dev/proc/bus/input/devices does not show the bt devices
- created keyboard layout for the specific vendor and product ID, but it seems that they are not loaded as the device corresponding to those vendor and product is not detected
- installed ubuntu using linux deploy, and keyboard is not working in there also,
The most anoying thing is that the company i bought it from is stating that the box does not support bluetooth keyboard input as it lacks "associated configuration file", whatever that means.
If anyone has experienced similar problem and found a solution, or if anyone has any suggestion as to what else to test, i would appreciate it.
Thank you,
Catalin.
Hi I own a similar device - Videostrong´s YokaTV KB2. It has the same issue you mentioned. I tried similar steps you mentioned, but unfortunately I were not able to fix it yet. I believe there might be issue with the code provided by Amlogic, because this issue is quite prevalent among S912 devices. I already tried to contact Amlogic support by e-mail, so far I am waiting for the reply.
This one works
Sorry to hear of your problem guys but I have a keyboard which works straight out of the box! It's the Mini Bluetooth, IS11-BT05 with internal batt & USB charging. Got it from Ebay <£20. Hope this helps.