How I fixed my phone - Fascinate Android Development

So i'm going to consolidate and give everyone a brief recap on how I fixed my phone since it required the use of SEVERAL posts. I figured someone will eventually get caught in the same situation I was.
This is by no means the best way, or the correct way to fix any phone, do this at your own pace and liability. I am, and no one mentioned in this thread is liable for your phone.
Please excuse any of my grammar mistakes, this is spewing out as I type.
History: Stock DI01 update w/ JT's Voodoo .2 OC Kernel.
Flashed JT's Super Clean ROM V.4 & Remix Incognito Theme.
** Market would no longer work. I had this issue before updating to the 2.2 market after the DI01 update, so I uninstalled and worked again, however, that option wasn't available with the ROM Flash.
I couldn't find a single fix that would work to get the market to work, even ADB pushing older market apk's to the system wouldn't fix it. I decided to do a flash of JT's Super Clean ROM V.2, that didn't fix the issue either.
**I was clearing data and wiping dalvik after each flash**
With nothing seeming to work, I decided to try Deodexe's Zinc ROM, and this is where **** hit the fan. After doing this, I sent my phone into FC boot loop hell. I was getting the process.acore FC everytime I pressed a key. I rebooted back into Clockwork, tried to recover from an old ROM I had backed up the previous day, notta. Damage was done. I was getting FC bootloop hell with a very crappy performance.
I decided it was time to Odin restore and start over. These aren't the exact steps I took, but if I had to do it over again, this is how I would do it. If at any point you're getting a process.media FC, remove your SD Card, and leave it out until you need it for CWM.
STEP ONE:
If you installed Voodoo (at any point, removed or not, do this step)
Thanks to adrynalyne
http://forum.xda-developers.com/showthread.php?t=804784
This was the main culprit behind my phone not working correctly after a complete restore. I moved this to the top of the list, because after that, it's downhill.
STEP TWO:
Completely Restore with Odin Restore Files
Thanks to fallingup
http://forum.xda-developers.com/showthread.php?t=782204
The instructions are a little un-clear, but do this. First, Only use the PDA option, and flash each backup one at a time along with the PIT file. You're not out of the clear yet. Read on.
STEP THREE:
Flash CWM Recovery (read my notes below)
Thanks to fallingup
http://forum.xda-developers.com/showthread.php?t=788099
After you've flashed CWM. Boot into CWM Recovery, Boot back in Stock Recovery and wipe data and cache. Boot back to CWM (select sd:update.zip) and do the exact same thing there. Reboot phone.
STEP FOUR:
Do a data factory reset
Even though you have just restored the **** out of your phone, you're still not there. Get through all the account setup fields and go to Settings > Privacy > Factory Data Reset.
After a reboot, you should be on your way to a completely 100% stock fixed phone. At this point, I would suggest making a ROM back up of this point before moving ahead with flashing again.
LAST STEP (for me anyway):
Restore apps via Titanium Backup
This restored most my apps and settings that I had already saved, including LauncherPro and the backups I had for that. If you haven't used Ti, then use whatever app backup app you do have, if you do indeed have one.
I decided to re-flash JT's Super Clean ROM V.4 found here. Thanks to JT
http://forum.xda-developers.com/showthread.php?t=796171
I am also running the Remix Incognito Theme here: Thanks to frostman89
http://forum.xda-developers.com/showthread.php?t=801867
Right now I'm mixed on updating a new Voodoo Kernel, I haven't decided if I want to do that again or wait for something else.
Thanks again for all the DEV support, hopefully someone searching will find this thread useful.

Pretty much my standard routine when trying new kernels.
I have a nandroid with my basic rooted setup (apps and data intact), so this doesn't set me back by a huge amount.
Just a few differences...
I use:
Odin (System, then kernel) (step only needed if things are *really* messed up...won't boot)
Boot into Recovery
flash update.zip to get into CWM
Wipe Data/Cache/Davlik
Reboot into recovery
run jt's voodoo_uninstall (flashes stock.zip and replaces mbr with stock mbr)
reboot into recovery
restore nandroid image.
This has yet to fail me and usually takes under 10 minutes. The nandroid image is key. Most of the time, I can skip the Odin step completely if I am not seeing anything truly, staggeringly horrific going on.
Again, jt's voodoo-uninstall seems to solve a lot more than just voodoo issues. This thing should get it's own topic/forum/entry in ROM Manager/zip code/nobel award...you get the picture.

PhoenixPath said:
Again, jt's voodoo-uninstall seems to solve a lot more than just voodoo issues. This thing should get it's own topic/forum/entry in ROM Manager/zip code/nobel award...you get the picture.
Click to expand...
Click to collapse
+1 I agree

Nice write up! I'm sure this will help many people.

Thanks
This along with several other threads allowed me to recover from my own mental retardation.
Gotta remember to remove voodoo before doing stuff. I should know better.
Thanks again.

This is not working for me. I removed voodoo (using the uninstaller). I then did odin and my phone boots but I cant do anything past the unlock bc of all the fcs I get. I wiped the cache and data. CWM is not working, when I try to do the update.zip I get a "failed to verify whole-file signiture". - I deleted the voodoo folder from the sd-card after uninstalling voodoo, dont know if that contributed to the problem. Any ideas?

Ke1evraTi said:
This is not working for me. I removed voodoo (using the uninstaller). I then did odin and my phone boots but I cant do anything past the unlock bc of all the fcs I get. I wiped the cache and data. CWM is not working, when I try to do the update.zip I get a "failed to verify whole-file signiture". - I deleted the voodoo folder from the sd-card after uninstalling voodoo, dont know if that contributed to the problem. Any ideas?
Click to expand...
Click to collapse
Sounds like you need to re-flash ClockworkMod through Odin. I'm guessing it got wiped out when you went back to stock.

Related

just attempted to flash 1200.zip and am getting tons of forced closes

very odd ... nandroid restore i have a feeling its gonna be
Well good luck with a nandroid if it's voodoo.
As a last resort...
theres a "Odin Restore files to get you to stock - xda-developers" thread, sorry can't link yet but yeah you can find that one easily
try wiping and see what happens
Clearing delvik cache normally helps with force closes in my experiences with clockwork and android.
Sent from my SPH-D700 using XDA App
So basically I factory restored and I'm doing okay now. I tried to go into clockwork recovery and restore my latest backup and I just get the force closes again but I'm safe to assume I do not have root currently so should I re root them try to restore my backup?
Did you flash a regular kernel over voodoo without disabling?
Same Problem.
I had this problem. Unfortunatly I did not have a backup, no biggie for me. I had to restore to stock using ODIN, then wipe data and had a brand new phone. I attribute it to the fact that I started changing Kernals more than my underware. After re-rooting I am ready to start flashing Kernals again, which means I will more than likely be restoring to factory again..... Maybe I should back-up current ROM. Oh, and I did flsh a ROM over Voodoo, don't do that.
well i have a backup but yes i tried to flash the 1200 zip over a deodexed system with voodoo lag fix ON so im guessing i shouldnt of done that. im getting super slow boots and still a **** load of force closes ... so im thinking the odin fix and starting fresh is the way to go for me.
so i flashed the restore through odin and i think im okay ... normal boot time and everything seems to be working fine ... had to format my SD card and everything. im gonna reroot and start everything over .. wish me luck!! haha
EDIT: well i spoke too soon im not getting any cell service on my device now hmm
EDIT: nevermind i do have service google just isnt connecting hmm this is ****ty
I just want to stress out how important it is to read every single word in the instructions and follow every single word....please check the stickied thread at top on how to install voodoo kernels...it has all the links you need....but seriously, many people have flashed tons of kernels and did many changes without a single hiccup... If things went wrong, then you misses an important step.
tats_06 said:
I just want to stress out how important it is to read every single word in the instructions and follow every single word....please check the stickied thread at top on how to install voodoo kernels...it has all the links you need....but seriously, many people have flashed tons of kernels and did many changes without a single hiccup... If things went wrong, then you misses an important step.
Click to expand...
Click to collapse
+1
Sent from my SCH-I500 using XDA App
I followed everything and when I disabled it, like have 15 times before, it just got caught in a bootloop and I had to restore yesterday. I think the voodoo fix we have now is just really touchy.
Same deal with mine
I've been swapping the voodoo kernels like crazy the last couple days and just found JT's "1200_interactive_bfq". Figuring I was running voodoo kernels and not that bogus lagfix junk, I used CWM and loaded JT's kernel. When it booted I got tons of the force closes and was unable to absolutely anything with the phone. Here's the simple way I got mine back to operating...
-Shut off phone
-Hold down volume key while powering up to get into factory boot loader mode.
-Once in, run update.zip to get into CWM
-Once in CWM installed the last voodoo kernel I had been running and rebooted the phone.
-Good as gold.
Now...in order to install the new JT interactive kernel do I have to disable the voodoo kernel or do I have to go back to a stock kernel first?
~Johnny

[Q] How can I tell if I'm properly partitioned?

I tried to install a custom boot animation and wound up having to use CWM recovery to get out of weird looping behavior. I'm not sure exactly what the restore function wipes (for instance, my Vegan ROM was still installed).
Since that episode I've been seeing more Forced Closures than before. I wonder if I need to repartition again. What values should I see if am or am not partitioned 2048/0 and where would I look for those? Thanks.
Surely someone can tell me what to look for as an indicator.
I promise to stop calling you "Shirley."
Rick,
I don't think it's personal -- there just is not a place you can look and see your
partitioning.
If you were boot looping, used CWM to stop it, repartitioned 2048/0 and are running
smoothly now I wouldn't worry about it.
Rev
EDIT: On further thought, I think if I were having glitches (like the FCs), I would
reflash back to stock, install CWM and clean up and reset as needed, and make
darn sure everything was working and exactly right -- and then go my way from
there. But that's just the way I work.
Thanks, Rev.
Thing is, I did not repartition (or, rather, re-repartition) after recovery. Have I necessarily reverted, due to CWM recovery, to the unreliable stock partition (bearing in mind that the device wasn't totally wiped; the Vegan ROM was still in place)?
EDIT: I understand that reflashing to stock and starting over will address any issue. I'm just trying to learn.
Rick,
If you boot into recovery using power/volume + and you get CWM you are still in
ClockWorkMod and have not reverted to stock recovery.
I understand you are trying to learn. I just don't like "flaky" anything so I "make sure"!
Rev

Still stuck on a DI01 with voodoo. want to upgrade

followed this thread back in november when i first got the phone(its the first thread in the "thread roll-up sticky") : http://forum.xda-developers.com/showthread.php?t=798064
Back then it was much different and said to get voodoo. Everything went fine and I havent seen a reason to update my phone.
Now I want to update to whatever the newest stuff is. I guess we have 2.2 by now? I dont need a lot of stuff. I probably didnt need voodoo. But on my current version things have started to get really glitchy and slow and GPS will not find my location at all.
I also froze the verizon auto update program or whatever its called because they kept trying to update my phone OTA. I dont like that.
What steps do I need to do in order to get up to date and not lose all my stuff on my phone?
I think this really depends on what YOU feel up to date is for YOU.
Plenty of people could push a custom ROM and all its shiny bells and whistles but from the onset you seem like you would just be happy with a functioning stock ROM (perhaps a debloated and debinged one).
I would read through the few ROMs we have, including the latest 2.2 stock ROM and figure out what you would like. Find out if you want a custom kernel or just an easy set and forget one, voodoo or non.
I'll do my best at a suggestion here before I tackle the next part of your post.
I would go here --> http://forum.xda-developers.com/showthread.php?t=1013312
Grab one of the stock ED01 or EC01 (read the bugs n such if you like, basically the same thing) ROM and radio ODIN packages and follow the guide to flashing with ODIN. Grab Imnuts stock voltage PBJ kernel and just keep it vanilla.
**The above will require the use of ODIN and CWR(clockwork recovery MOD)**
Now the "not lose" part of your question. This depends on what you mean by lose. ( I feel like Clinton and his definition of what "it" is....). If you backup with google and/or titanium backup you are pretty much in the clear. Aside from losing maybe a login or some preferences you will not lose any hard data (pics, contacts, apps....etc)
Read all the steps before you do anything. Also, you will need Odin. Just search for it in the forums (or Google) and you should be able to find it.
What you want to do is flash CWM 3 by following this thread: http://forum.xda-developers.com/showthread.php?t=1046905
Then, you should go and backup your stuff with Titanium Backup (get it at the market). Backup contacts with Google.
Get the new radio from http://forum.xda-developers.com/showthread.php?t=1097355 I would go for ED01.
Download ComRom 2.0 (http://forum.xda-developers.com/showthread.php?t=1108991) to your SD Card. I recommended getting a version with a kernel either pbj or otb kernel.
Next, boot to Clockwork Mod (press volume up and down and power) and make a nandroid backup there. (Select the backup option in the menu).
Now, after every thing is backed up, wipe data, clear cache, clear dalvik (under advanced menu I think).
Finally, flash the ComRom by selecting the zip from the sdcard.
Now, as a warning, you will lose the stuff on your phone which is why you made backups. DO NOT flash the nandroid (CMW) backup. That is for if you go back to stock. DO use Titanium Backup and your Google account to get MOST of your stuff back. Everything stored on your SD Card should be safe.
If anything that I said is wrong, xda please correct me, but I've done it a few times... this is roughly what I did, and it worked for me.
EDIT: gkirby11 beat me to it.
I would agree with the previous suggestions, and would add that you should use Titanium Backup to backup all your user apps+data. Do not, however, use it to backup/restore system data, because this has been shown in many cases to be the cause of force closes, and other headaches.
I am thanking you for your great username, Art Vandelay. I assume that is a Seinfeld reference to the importer/exporter.
jptech7 said:
Read all the steps before you do anything. Also, you will need Odin. Just search for it in the forums (or Google) and you should be able to find it.
What you want to do is flash CWM 3 by following this thread: http://forum.xda-developers.com/showthread.php?t=1046905
Then, you should go and backup your stuff with Titanium Backup (get it at the market). Backup contacts with Google.
Get the new radio from http://forum.xda-developers.com/showthread.php?t=1097355 I would go for ED01.
Download ComRom 2.0 (http://forum.xda-developers.com/showthread.php?t=1108991) to your SD Card. I recommended getting a version with a kernel either pbj or otb kernel.
Next, boot to Clockwork Mod (press volume up and down and power) and make a nandroid backup there. (Select the backup option in the menu).
Now, after every thing is backed up, wipe data, clear cache, clear dalvik (under advanced menu I think).
Finally, flash the ComRom by selecting the zip from the sdcard.
Now, as a warning, you will lose the stuff on your phone which is why you made backups. DO NOT flash the nandroid (CMW) backup. That is for if you go back to stock. DO use Titanium Backup and your Google account to get MOST of your stuff back. Everything stored on your SD Card should be safe.
If anything that I said is wrong, xda please correct me, but I've done it a few times... this is roughly what I did, and it worked for me.
EDIT: gkirby11 beat me to it.
Click to expand...
Click to collapse
Okay, I sat here for the past hour trying to get caught up to date before I ask my questions. I only use this site like once a month and there is always new stuff here. I already have odin on my laptop cause I needed it for the tutorial that I linked in the OP
1)I have Rom Manager(v4.3.1.3) and under RECOVERY It says "current Recovery:ClockworkMod 2.5.1.0" and "Latest: ClockworkMod 3.0.0.8. Does this change step one as you posted?
2)I have titanium backup and have used it to freeze some of the bloatware. I do not know how to backup anything with it though. where do the backup files sit anyways until I am ready to put them back on my updated phone?
3)Can I go strait to ED01 from where I am now(DI01--was a few months after phone was released) Or do I have to work my way up through the other updates? What order do they go?
I dont even know what this step is, lol. Radio???
4)I will get the 1.5 OTB voodoo kernal. also, I noticed this roms stup looks like adwlauncher or whatever that other launcher is. Right now i use launcherpro, which i like more. I hate touchwiz. can I still use launcherpro on here?
5)I am guessing this part would be self explanatory once I got to it, but I might as well ask just in case, what is a nandroid backup?
6)Where do I go to complete these functions?
7)Do I just select it using a file browser like astro????
I thought that I had to remove voodoo before I did any of these steps??
What about the bloatware that I have frozen? The only reason I did that was because i was told to so in the tutorial that i linked in the OP . It said I will need them if I ever update.
Thanks for your help guys!!
1. CMW 2.x is fine.
2. Open Titanium, click the backup/restore tab at the top. Now press the menu button (left to your home button), click batch. Now, select RUN next to Backup all User Apps. It will then back them up to your SD Card.
3. Go through the steps listed in the tutorial. You will step through a couple radios to get to ED01
4. It uses the gingerbread launcher (made by google, but it is modified by TSM), but yes, you can use whatever launcher you want on almost any ROM.
5. A nandroid backup is made in Clockwork Mod, and it backs up the system & all your apps & data. If you want to go back to stock, you can flash the stock ROM and then restore this backup, and it will be exactly how it is right now.
6. These functions are in Clockwork Mod Recovery. Hold Volume Up, Volume Down, and Power to get to CWM.
7. No, you select the option in Clockwork Mod. It is something like choose zip from sd card. From there you navigate the SD card looking for the zip file with ComRom.
As a tip, to navigate CWM, use the volume keys to go up and down in the lists and the power button to select an option. Use the menu button to go back to the last list. When you are done, select reboot & cross your fingers.
If you have voodoo, OTB is also voodooo, so you are fine (*should be fine*).
Your bloatware will "disappear". You won't have to freeze it ever again. ComRom doesn't have any of the bing, vzw bloat, etc.
Good Luck & if at first you don't succeed, flash, flash again! For the worst mistakes, Heimdal and Odin work wonders.
Sorry if I miss something but first off try and stay away from rom manager, many people have been having issues with it.
ED01 is what verizon released to us as the official ota. EC01 is one that developers created from the mesmerize I believe. I don't think there's much of a difference between the two. Getting ED01 takes a bit more work as you have to return to stock and ota all the way up through 3g and it takes a bit.
If you're already on voodoo I think you shouldn't have any problems flashing a rom with a packaged voodoo kernel such as otb.
What I would do since you already have a recovery is download a zipped CWM 3.x and place it on your sd. Then download the rom of choice, recommend com rom or evil fascination if you're not going to flash much, they come with voodoo kernels.
Hop on odin and flash the EC01 radio. Boot into recovery and flash CWM 3.x. wipe data, cache, and dalvik. Flash the rom. After backing up of course.
Someone correct me if I'm wrong. Hope this helps
Sent from my SCH-I500 using Tapatalk
Sent from my SCH-I500 using Tapatalk
jptech7 said:
I am thanking you for your great username, Art Vandelay. I assume that is a Seinfeld reference to the importer/exporter.
Click to expand...
Click to collapse
Yep- most people i work with are too young to get that.
bangdrum said:
Sorry if I miss something but first off try and stay away from rom manager, many people have been having issues with it.
ED01 is what verizon released to us as the official ota. EC01 is one that developers created from the mesmerize I believe. I don't think there's much of a difference between the two. Getting ED01 takes a bit more work as you have to return to stock and ota all the way up through 3g and it takes a bit.
Click to expand...
Click to collapse
Yes, I would stay away from ROM Manager. Just boot into CWM.
Also, if you follow the step in the forum post that I linked, you can get ED01 without going back to stock and ota-ing. They have extracted the upgrade packages, so you just have to flash two or three packages to get to ED01. Really though either EC01, ED01, or ED03 should be fine.
Once I boot into clockwork mod I dont get an option for Nandroid backup
this is what I get:
Android system recovery <2e>
Samsung recovery Utils
--For BML--
Reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
E: Can't mount /dev/block/mmcblk0p1
(invalid argument)
#MANUAL MODE#
Click to expand...
Click to collapse
With the exclamation marker and the little android guy. I am affraid to click anything else so I just rebooted the phone and now i am stuck. I started here because this was the first step to do in the tutorial.
also, for me, to select anything in CWM, I need to press the home button, not the power button.
wut do?
You don't have CWM installed then.
Sent from my SCH-I500 using XDA App
If you can boot into android. Make your titanium backups and google backups. Then, get one of the all in one packages for odin and flash it.
Sent from my SCH-I500 using XDA App
jptech7 said:
If you can boot into android. Make your titanium backups and google backups. Then, get one of the all in one packages for odin and flash it.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
what if i just flashed CWM like you said to do in your original post? Even if its a few extra steps or whatever, it makes it easier for me because I have that list and a tutorial you linked to go off of
fupamobile said:
Once I boot into clockwork mod I dont get an option for Nandroid backup
this is what I get:
With the exclamation marker and the little android guy. I am affraid to click anything else so I just rebooted the phone and now i am stuck. I started here because this was the first step to do in the tutorial.
also, for me, to select anything in CWM, I need to press the home button, not the power button.
wut do?
Click to expand...
Click to collapse
You are booted into the stock Samsung recovery, not CWM. This is why the home key works instead of the power button.
Flash this recovery via Odin if you're on voodoo: (or want to get on voodoo)
http://dl.dropbox.com/u/36791/CWM3_Voodoo.tar.md5
Or, use this if non-voodoo: (use .tar file)
http://forum.xda-developers.com/showthread.php?t=942021
Once Odin is done, it will power down the phone. Unplug, reinsert battery and boot into CWM by holding vol up, vol down, and power at the same time, continue holding until CWM appears. Go to backup/restore.
artvandelay440 said:
You are booted into the stock Samsung recovery, not CWM. This is why the home key works instead of the power button.
Flash this recovery via Odin if you're on voodoo: (or want to get on voodoo)
http://dl.dropbox.com/u/36791/CWM3_Voodoo.tar.md5
Or, use this if non-voodoo: (use .tar file)
http://forum.xda-developers.com/showthread.php?t=942021
Once Odin is done, it will power down the phone. Unplug, reinsert battery and boot into CWM by holding vol up, vol down, and power at the same time, continue holding until CWM appears. Go to backup/restore.
Click to expand...
Click to collapse
this is wierd to me though. because when i first got the phone I thought I had done all that already. I followed the tutorial in the OP but this was in november and it was much different then. what that tutorial accomplished was getting rid of bloat, adding voodoo, getting root, installing CWM via Odin, adding launcherpro. I know I did SOMETHING right because my boot animation changed, touchwiz was gone, the bloat was gone, and I have root. but thats all I know that I did........
fupamobile said:
this is wierd to me though. because when i first got the phone I thought I had done all that already. I followed the tutorial in the OP but this was in november and it was much different then. what that tutorial accomplished was getting rid of bloat, adding voodoo, getting root, installing CWM via Odin, adding launcherpro. I know I did SOMETHING right because my boot animation changed, touchwiz was gone, the bloat was gone, and I have root. but thats all I know that I did........
Click to expand...
Click to collapse
If you heard the robotic android lady during install, then you have ext4 file system enabled (aka voodoo). If you don't remember, you can use voodoo control from the market to check if you have etx4 lagfix enabled. If you can't install this, your kernel isn't compatible. I recommend imnuts' PB&J kernels here. Stick with sv (stock voltage) if you aren't familiar with undervolting/overclocking.
http://sites.google.com/a/imnuts.net/android/kernels
If you are on the stock kernel, that can sometimes overwrite CWM. You have to boot directly into CWM after Odin to avoid it. Make your backups and flash ComRom then. Then CWM will stay, and you will have a ROM installed... with Voodoo nonetheless.
You can also get an ODIN package for a ROM. Look at http://forum.xda-developers.com/showthread.php?t=1048380 and get one of the Community Rom ones that wipes data. Make your Titanium,etc. backups, and then Odin that. Then update to the latest ComRom, and make sure to always wipe data, cache, and dalvik. That could be easier for you to do if you are fine with Odin.
artvandelay440 said:
If you heard the robotic android lady during install, then you have ext4 file system enabled (aka voodoo). If you don't remember, you can use voodoo control from the market to check if you have etx4 lagfix enabled. If you can't install this, your kernel isn't compatible. I recommend imnuts' PB&J kernels here. Stick with sv (stock voltage) if you aren't familiar with undervolting/overclocking.
http://sites.google.com/a/imnuts.net/android/kernels
Click to expand...
Click to collapse
yes i definitely heard that lady. so i have voodoo. but i dont have CWM??
so does that mean i can start from step one in the original post that jptech posted in this thread?
thanx guys for your help. i know im probably being a little difficult. i just dont want to screw up my phone.
Personally, no offense.. but it seems that you are having issues with CMW. I too had a disappearing CWM. The easiest route would be to backup what you can with Titanium, Google, etc. Then, use one of the all-in-one Odin ROM packages that I posted. Download one that wipes data, and you will start fresh with ComRom, a new kernel, and CWM. From there, feel free to flash another ROM from CWM. Just remember to wipe in between ROMs, and you'll be fine. Really though, it is very hard to "mess up" a Fascinate. As long as you don't corrupt the bootloader or flash a ROM for another phone, you can always ODIN.
Just a tip: I use the Amazon App Store, and it stores the apps that I have online (just without my data). It is really easy to reinstall things that way, but Titainum is great too. It can store your app's data which is really a nice feature.
Also, remember that it is fine to ask questions (it is the Q and A section). I respect that you are trying to be careful. Everyone starts somewhere.

[Q] Difficulty changing ROMs

For the record, I searched several times, but did not find an answer that seemed to fit this question. Also, I hope this isn't a ridiculous noob question.
A little background. I have/had a D1 which I rooted and changed ROMs on many times. It was easy. I either used a new .zip file or ROM Manager. I now have a Fascinate that I tried to root with SuperOneClickRoot, but it didn't seem to work as none of the 'root-only' apps would work. I then tried using Odin, but still had the same problem. I successfully used Odin to return to stock, but of course that was annoying and painful. Frustration got the best of me, and I tried again with Odin and was successful. I ran Odin, got to recovery, installed and ran a SuperClean ROM using the .zip file for many days.
Here's where the trouble begins. I decided to try a different ROM, so I rebooted into recovery, backed up my current ROM (or so I thought), and tried to load another .zip ROM. The first one would not load correctly, so I tried another, and then one more. I wiped the data and the cache before each try. None of them worked, so I thought, OK forget this, I'll go back to my backup and stick with it. NO BACKUP (for this phone) was listed under Backup or Advanced Backup. So, now I'm really stuck, because the only ROM I can get to work at all is Kaoscinate (sp?), but it will NOT work with 'root only' apps, like Titanium Backup'. I read a good bit on xda and tried to change with Odin, but I still had no real luck. I was able to get a SuperDark ROM to work, but it is on Android 2.1 and the 'root only' apps still do not work on it. I'm afraid to try another ROM change because of the issues I've had before. I want to go back to the SuperClean ROM. My phone is very important as it's my business line, so monkeying around with this trial and error is taking too long and making me very uncomfortable.
I can easily get to recovery, wipe data &/or cache, and install a new .zip, but will it boot or work for me? I believe the answer is no, so what am I doing wrong?
Will I have to go through Odin to restore to stock and then REDO the Odin root and go to a ROM that way? That is time-consuming and my confidence is low in that method working to get the ROM I want.
Is there some kind of fix for the 'root only' programs to be able to see that I AM rooted? I tried updating Busybox using Titanium, but that didn't do the trick. Plus, this time, I can't even get Titanium to open, because it says I'm not rooted.
Thanks in advance.
sigmtndawg said:
For the record, I searched several times, but did not find an answer that seemed to fit this question. Also, I hope this isn't a ridiculous noob question.
A little background. I have/had a D1 which I rooted and changed ROMs on many times. It was easy. I either used a new .zip file or ROM Manager. I now have a Fascinate that I tried to root with SuperOneClickRoot, but it didn't seem to work as none of the 'root-only' apps would work. I then tried using Odin, but still had the same problem. I successfully used Odin to return to stock, but of course that was annoying and painful. Frustration got the best of me, and I tried again with Odin and was successful. I ran Odin, got to recovery, installed and ran a SuperClean ROM using the .zip file for many days.
Here's where the trouble begins. I decided to try a different ROM, so I rebooted into recovery, backed up my current ROM (or so I thought), and tried to load another .zip ROM. The first one would not load correctly, so I tried another, and then one more. I wiped the data and the cache before each try. None of them worked, so I thought, OK forget this, I'll go back to my backup and stick with it. NO BACKUP (for this phone) was listed under Backup or Advanced Backup. So, now I'm really stuck, because the only ROM I can get to work at all is Kaoscinate (sp?), but it will NOT work with 'root only' apps, like Titanium Backup'. I read a good bit on xda and tried to change with Odin, but I still had no real luck. I was able to get a SuperDark ROM to work, but it is on Android 2.1 and the 'root only' apps still do not work on it. I'm afraid to try another ROM change because of the issues I've had before. I want to go back to the SuperClean ROM. My phone is very important as it's my business line, so monkeying around with this trial and error is taking too long and making me very uncomfortable.
I can easily get to recovery, wipe data &/or cache, and install a new .zip, but will it boot or work for me? I believe the answer is no, so what am I doing wrong?
Will I have to go through Odin to restore to stock and then REDO the Odin root and go to a ROM that way? That is time-consuming and my confidence is low in that method working to get the ROM I want.
Is there some kind of fix for the 'root only' programs to be able to see that I AM rooted? I tried updating Busybox using Titanium, but that didn't do the trick. Plus, this time, I can't even get Titanium to open, because it says I'm not rooted.
Thanks in advance.
Click to expand...
Click to collapse
If it's that important, and you'd like to avoid any trial and error, simply odin your preference of ED01 roms here:
http://forum.xda-developers.com/showthread.php?t=1048380
To test root, simply open terminal emulator (free in market) and type "su" (no parentheses). It will notify you of a superuser request.
find an odin package for the baseband you want like EB01, EC01, ED01, etc (I use an all in one complete deodexed and debloated EB01 package myself) and the newest CWM 3. Odin them both, boot straight into cwm, wipe data/cache/dalvik, install the .zip rom of your choice from sd card and reboot phone. Should work fine, its the way I've done it and I've had few if any problems
edit: most roms like SuperClean, Evil, ComRom, etc are already rooted so there's no need to do anything special to gain root. the hardest part is flashing it correctly
You guys are awesome! Thanks!
If it's that important, and you'd like to avoid any trial and error, simply odin your preference of ED01 roms here:
http://forum.xda-developers.com/show....php?t=1048380
^^This one worked great for me. I seem to have the Samsung things I like (their visual voice mail, their video player, etc.) without the other bloatware.
I do have one more question. You said 'flashing the ROM correctly'. Before, with my D1, that simply meant using RM to 'Load Custom ROM' or rebooting into recovery mode and installing another .zip file. That has not seemed to work on this phone. What is the correct way to load another ROM on these phones.
Again, thanks for the help!!
sigmtndawg said:
You guys are awesome! Thanks!
If it's that important, and you'd like to avoid any trial and error, simply odin your preference of ED01 roms here:
http://forum.xda-developers.com/show....php?t=1048380
^^This one worked great for me. I seem to have the Samsung things I like (their visual voice mail, their video player, etc.) without the other bloatware.
I do have one more question. You said 'flashing the ROM correctly'. Before, with my D1, that simply meant using RM to 'Load Custom ROM' or rebooting into recovery mode and installing another .zip file. That has not seemed to work on this phone. What is the correct way to load another ROM on these phones.
Again, thanks for the help!!
Click to expand...
Click to collapse
Do not use ROM manager at all for anything on the fascinate.
The correct way to flash on fascinate: Download ROM .zip file and place on the root directory or your sd card. Boot into CWM and wipe data/cache/ dalvik cache (dalvik is under advanced) choose install zip from sd card. Install and reboot. First reboot will take 5-10 minutes, so be patient.
Hope this helps.

[GUIDE][ROM FLASHING][WALK THRU] Easy to do! All Questions Welcome!

This will help anyone who keeps having flashing issues.
More detailed instructions in my GUIDE!
http://forum.xda-developers.com/showthread.php?t=2295557
THIS IS ONE QUICK/SIMPLE ERROR FREE ROM FLASHING PROCEDURE
This should eliminate a few posts saying, stuck in download mode, stuck at logo. just vibrates and them MANY other issues that somehow, everyone seems to find.
Here is my quick rom flashing process I use ALWAYS (yes always)
THINGS YOU NEED ON extSDCARD
1. Extra kernels (2 or 3 you know works for your device)
2. Optional: 2 recoveries that can be flashed (I use CWM & TWRP)
3. Optional: apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
Flashing the rom: TOUCHWIZ/AOSP ROMS
1. Backup current rom (to the extsdcard)
2. Complete wipe, (I do complete, some people do not) Complete = No Issues [FACTORY RESET + CLEAR CACHE + CLEAR DALVIK CACHE + CLEAR DATA]
3. Flash the rom
4. Flash the kernel (your device kernel) (I know some roms have their own kernel) this is where your problems start.
AGAIN: FLASH YOUR KERNEL, you KNOW it works. 1 more time FLASH YOUR KERNEL. (you can experiment with other kernels after you boot)
AOSP ROMS - require you to flash gapps before you boot. [This is not required for TouchWiz roms]
5. Boot the rom.
FINISHED!!!! SUCCESS!!!
Total time to flash a rom:
7-10min
Errors - NONE
This goes for every rom in my guide.
TIPS:
This flash procedure is for Touchwiz Roms, if you are flashing AOSP roms, you must flash the gapps package associated with the rom you are flashing.
**** SGH-I337M Users: Often requires flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
[Special thanks to blyndfyre for this helpful tip].
The extra recovery I flash if a rom does not like the recovery I am using.
Yes, you can flash recoveries back and forth.
Apps.zip I flash after the rom is up & running. This I use to get the rom setup (like root explorer and others needed)
I am in no way responsible for anything that may do damage to any device - Use these tips at your own risk - period!
If you found this useful in any way, please hit the THANKS button for my effort.
RESERVED
TheAxman said:
Any questions? Anyone.
Click to expand...
Click to collapse
I've been running into a lot of issues when trying to flash different ROMs. For instance, right now I'm on CleanROM 1.6 - I just tried to install PureGv2.
Steps I took:
Have Goo and ROM Manager installed after clean install of CleanROM 1.6
Flash CWM from ROM Manager
Install Recovery Script from Goo
Reboot into recover from Goo
TWRP loads
Wipe data, cache, dalvik, etc
Install PureGv2
I forget the error off the top of my head but it doesn't install
In a nutshell I'm asking what am I doing wrong? Do I need to flash another kernel?
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
TheAxman said:
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
Click to expand...
Click to collapse
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
harrytery said:
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
Click to expand...
Click to collapse
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
TheAxman said:
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
Click to expand...
Click to collapse
Alright sounds good. Flashing back to stock later today then re-rooting
thanks for the help
Remember always do a BACKUP before you do anything.
First off, big thanks for this thread.
Now I'm running Cleanrom 1.5. If I wanted to install a new rom can someone please explain exactly what I do to go about it? As jargon free as possible would be awesome.
Sent from my SCH-I545
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Vampyre111 said:
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Click to expand...
Click to collapse
I can not stress enough HOW IMPORTANT THE KERNEL IS!
Hmm so everyone is a now a Oriental Flash Master from the far East now huh?
What recovery is everyone using?
[updated: 07-12-2013]
Flashing Questions
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
xander45 said:
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
Click to expand...
Click to collapse
did you set the permissions for the app? That should work actually. Look at one of the apps in that directory, and set the permissions the same for the voice app. Reboot and see what happens.
Good luck.
May want to post this question also in my guide thread.
http://forum.xda-developers.com/showthread.php?t=2295557
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Painterface said:
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Click to expand...
Click to collapse
Please bring the question over to my thread up above. It shows also what kernels to use. We will help there.
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
theoneknownasbob said:
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
You would flash the rom, and after, flash your verizon kernel, simple as that.

Categories

Resources