How do I see from which number a Text Message (SMS) was send?
Here is the problem: A friend of mine wend abroad and is using a different mobile phone number. I saved the new number in the contact file under "Home2 phone". Now, if I recieve a text message I actually dont see were it came from, do I?
(Even after clicking on the Message it opens the contact but shows the mobile phone number, not the one it was send from.)
Thanks for anwser
When receiving the message, all you can see is the name of the sender.
When you click on the contact, it shows you only the mobile phone number because, theoretically you can receive sms messages only from mobile phone numbers. A stationary phone number cannot be used to send sms
Torque77: Wrong. You CAN either send and receive SMS from fixed lines in most EU countries. And Rose can handle it without any problems.
Gipo: Just hit Enter when the received message is selected. Contact card will open with proper sender's phone number highlighted. BTW in threaded messages is enough if you just simply hit "Reply" - it will be sent automatically to correct number. (In fact, every number - even different number of the same contact - creates a new thread).
EDIT: OOPS, you're right. It just shows the card without highlighting the number (having a look I saw a last call, not the message). Then only way is direct reply in the thread then. Nevertheless, it's simple and reliable.
lelopet said:
Torque77: Wrong. You CAN either send and receive SMS from fixed lines in most EU countries. And Rose can handle it without any problems.
Click to expand...
Click to collapse
Sorry then. Guess Moldova is waaaay behind and this chapter.
No problem... Just an reminder. Nevertheless, you can't be sure, if it is a phone able to receive it (again - some operators forwards SMS as a voice message then).
At least at the moment you already know, that Rose can send SMS on ANY phone number stored with contact - if you have somebody e.g. with more mobile phones.
Yes, if you just choose a contact in the list and select "SMS" by right-left arrows, the mobile number is used. But if you hit Enter in Addresse field in empty SMS form, select an user, Rose will show you all available phone numbers for the contact and is able to send the message at any of them.
thanks guys
As explain in the title I can't send any messages but i can receive them. My Hero is running with Villainrom 5.5 and I have done the update to get all APN.
Thanks for helping me guys!
manually input the smsc
type in these numbers on your dialer,... *#*#4636#*#* then wait a few seconds.
Go into phone settings, then scroll down to the bottom.
Actually i've tried several things like changing the wcdma to gsm... but nothing changes. It is annoying because i can do everything but i still can't send messages. I didn't found phone settings but phone informations...
Neoangel21 said:
Actually i've tried several things like changing the wcdma to gsm... but nothing changes. It is annoying because i can do everything but i still can't send messages. I didn't found phone settings but phone informations...
Click to expand...
Click to collapse
Yeah thats the one, phone info,... then did you put in your SMSC, its the sms centre number, get it from your network provider.
Are you trying to sen a really long message? (i.e. over 160 chars) This is a known issue, use handcent and change the settings to split long messages to simple split.
Hey all,
Just wondering whether its me or not, but ever since the update if I type a text longer than '1 message(+9) '(weird but cool feature if I must say) my phone will Not send the message no matter what..and as long as I have it under that character limit it works fine...
I'm in australia and with Optus, and I work for them as well so I know it isn't my sim or my account :/
Anybody else had this issue? Because I know currently the samsung galaxy S(2.1) is having compatability issues with texting, but I wouldn't imagine it'd be the same cause...
- Shalz
Sent from my X10i using XDA App
I just did a test text and it worked fine.. 2 messages sent no problems.. (UK Vodafone).. World Generic 2.1 firmware.
just wondering did you update to the optus 2.1 or the generic?
I have a feeling i must be on the generic firmware because i did have 1.6 Rooted prev. to the update
I asked the guys at work about the update today and none of them so far have been able to update...even though i downloaded the Australasian PC Companion.
but even picture messages and everything else works perfectly fine...its just that one thing =/
I have the exact same issue, it happened to me also on 1.6 bu that was more generous and gave me 2 message lengths before it would fail to send. its strange as the first couple of messages i sent on the nordic 2.1 update where fine and they were well over 2 message lengths and then suddenly if i try to send one over 1 message length it fails!!! weird
would love to find the reason to this
Someone found any solution FOR THIS??? Help
It's saying "Could not send" for me, but is actually sending the first 160 characters of the message
Edited to add: I'm on UK Vodafone with the Global Generic 2.1 firmware.
Further edit: I'm able to send long sms to myself, just not my intended recipient...? She's on O2, could this be why?
Even more edit: Just tried sending to someone else and they didn't receive anything?! Very inconsistent!
sms Issue
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
zerro2hero said:
Hi,
I have the same issue with my sms, it will not send more than 1 message otherwise the text bounce back saying message not sent, I just upgraded to 2.1 Nordic. The problem did exist when i was on the 1.6 but then the message will not send only if it was more than 2 messages, I am on vodafone uk, my phone was not debranded whilst running 1.6.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
I still haven't found a solution to this, interesting that you're also on UK Vodafone though, maybe it's something to do with them rather than the firmware?
has anyone found solution to this I have Rogers X10a and Telus sim card in it. Can't send sms if its longer than 160 charecters . Please help
I'm having the same problem as well. Any message over 160 characters and it won't send. This has actually resulted in my not being able to send shorter messages after trying to send a message that is over 160 characters. Not sure what is going on here or if there is a setting that can be changed for this.
I'm in the U.S. on AT&T. Used the xda flash to global and rogers and neither would send an sms message over 160 I guess? (it's 2 sms) Did a global firmware to 1.6 and then updated to x10a 2.1 via sony and then tried and it still would not send. It will send through GSM however using the edge network. It must have something to do with the h network then and no I don't get 3g to pop up at the top of the screen ever..
I'm not too sure what the problem is here but it is the only one I am having on my phone, everything else is working great!...
If anyone can help us all out with any ideas or suggestions it would be great but as of now it sounds like it's a problem with the new software from sony. Gonna try messing with the sms apn a bit and see if I come up with anything but as of now 2.1 sms is considered broken in my opinion.:/
im having the same problem. im using chompsms and at the botton, instead of saying 160 char it says 70 and wont send more than two texts long. If the network is changed to GSM only, any size text will send but then internet is slow unless its changed back. AT&T settings were found automatically but they are all correct.
my SE Xperia X10 on 2.1 wont send messages at all. no matter the size. ive tried to send messages like "Hey" or "No" and they dont send. Im with in Canada, with Rogers. And its not my signal because i have 4 bars...
-Thanks
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Jeff-SEAnswers said:
Hi All,
Just wanted to let you know we had this posted on our forum also at talk(dot)sonyericsson(dot)com and I've sent it off to the correct team to find us a solution, or at least get a comment from them. I'll update you all here when I have more info.
-Jeff
Sony Ericsson Answers Team
Click to expand...
Click to collapse
Thanks Jeff! As I am having this issue too, awaiting for any news about it...
Hi Everyone,
I've heard back from our team today. This is not a generic problem. I will need information from your phones to pass on so I can duplicate the problem. Please PM me the following details:
Country:
Service Provider/Operator:
IMEI:
SI#: (SI is the ####-####.# on the back of the phone)
Did this happen in 1.6?:
Did it ever work on 2.1?:
I need at least 5 examples to pass to the team to move this forward. I will update you when I've collected these.
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
dubbug1971 said:
Hi all,
Ok, found a solution - try this and let us know how it goes, its worked for me!
1. Open dialer and dial: *#*#4636#*#*
2. Select Phone Information from menu
3. Scroll down to SMSC
4. Enter SMS centre number given by your service provider in this box
5. Select Update
I got a "update error" message but it still seemed to save the number, but with " and a 3 digit code after it.
If the above doesn't work, as a short term solution you caould switch to just "GSM" in your network settings and this also works - not ideal, but it's a workaround!
Click to expand...
Click to collapse
Didn't work for me, UK Vodafone.
doesn't work for Telus Canada
Sorry if this is the wrong thread to raise this topic, but didnt know whr else I shud put this.
I bought a sprint motorola photon few days back and programmed it to my CDMA operator (Citycell - Bangladesh). Everything is working fine, got EVDO to work etc.
BUT whenever I receive an SMS from ANYONE or any number, the "0" in sender number is shown as character "D". FOR Example if i get an SMS from 01199800570, it will show I received SMS from D11998DD57D > it has nothing to do with that number being in phonebook or anything. any "0" in sender is shown as "D". as a result i cant even reply to these SMS,
FUNNY thing is, when i click on the sms to read it, the ORIGINAL number with "0"s (01199800570) is shown in the last line as [CB# 01199800570]
I have inspected the mmssms.db. I found 2 fields - ADDRESS (which contains all the phone numbers' 0 replaced by D] and CALLBACK_NUMBER [which contains the actual number]
Now I was wondering -
1. IF thr is anyway to fix it by tweaking system settings or something so that sender's number is received correctly [so that ADDRESS field would have correct numbers]
2. OR if it cant be fixed, if there is anyway to force the SMS app (Conversation.apk) to read Sender's address from CALLBACK_NUMBER field instead of ADDRESS field ...
3. OR ATLEAST can someone kind enuf to provide me with a script that would (when run) access the mmssms.db and change all the "D" in values of address column to "0" ?
This is NOT a photon 4g problem - but with most SPRINT cdma phones. The same thing happens with ANY sprint android - when programmed in different country, 0 is replaced with D in received SMS
THEN again, this is a problem in android version < ics. THE ICS phones that are programmed shows sender's number correctly
AGAIN, this is NOT a problem ONLY with my operator, I heard about similar problem in other countries too
Since ICS shows it fine, that means, thr are work arounds in gingerbread too. OR atleast if we can force the SMS apps to read sender's number from CALLBACK_NUMBER, problems are solved.
I know you guys are the best and if u look into it, it would only take a min of ur time to find a solution ... :angel:
anyone ?????
I have the same problem - using an XT800 with the chinese 2.2 rom
most of the time it works ok but it goes haywire on its own without any apparent reason! having a hard time figuring out the sender of each and every message that comes in, some help/ guidance would be very helpful
TIA
I just got this as my first smartphone, so excuse the newbie! I just bought this phone from The Phone Cellar on eBay. I am on Page Plus' Talk n Text 1200 Plan. I cannot seem to send MMS messages on my phone and wonder if this is an issue with my plan or with my phone.
When I try to send a text message, the phone automatically tries to send it as MMS. I get the error "No data connection. Please check your MMS APN configuration in mobile network settings." But on the phone settings page, the only thing that shows up under Mobile Networks is a System Select option -- either "Home Only", or "Automatic." (I've tried both, and I still can't send MMS).
After I try to send a text, it fails, shows the error message, and the phone then reverts to some non-MMS format (the "MMS" indicator goes off - maybe that's SMS?). I can then send a text. So every time I want to send a text, I first just send a one-letter text that fails and then send the text I want to send! Picture messages never work.
I called Page Plus and they reset all the data features on my account and re-provisioned my device into the network, but that didn't work.
Any help is greatly appreciated!