I just received a brand new X10 Mini Pro from an eBay seller. Great little phone! The keys all work fine, however, some of them have a sticky feeling and make a 'sticky' sound, as if the pad below the keys is trying to stick but comes off.
Do any of you have this problem, and would the problem eventually go away?
I saw a disassembly guide online but it seems that removing the keypad requires lifting up the keypad area with something pointy, which I really don't want to do without risk of damage!
Exchanging the unit is a possibility but for me it would be expensive to send it back and then have to pay FedEx brokerage fee for the exchanged unit.
Hi, have the same problem that you have =) I have an x10 mini pro and without any reason my "S" key on the hardware keyboard just lost that 'click' sensation o_o the thing is that the key works correctly, but it feels really strange to press something and have not sure if you pressed that or not... maybe I used to much strong when the "S" key I don't know for sure what caused that. I removed the keyboard and got access to that transparent part of it and when pressed the circle that corresponds to the S key, the sensation is the same...
my question is: There is any simple way to solve this? Without have to disassembly all the phone? I mean I bought my phone only two months ago, I rooted it and changed to 2.3 also XD I guess if I have to send to the warranty I will have to comeback to 2.1 and maybe unroot it (if it is possible)
Also, there is anyway to unroot the phone? thanks in advance
Me too have the same the prob...Infact with a lot of keys....
I thought thats the way it is, aint it....Does anybody(or everybody) has the same prob....?
And the worst part is i never have used my keyboard....LOL
After installin these custom roms i've only used onscreen keyboard..(Installed custom roms just 4 days after purchase)
I have my mini since 0.5 year and keyboard works perfectly. @Alucart88 I think only solution for you is replacing keyboard.
Related
Hi,
So I'm an idiot who typed on my Ameo's keyboard with wet hands. This means the keyboard is fubar'd. I need to obviously return it to T-Mobile for a replacement, but they'll absolutely slaughter me if it's running Windows Mobile 6, I'd imagine. I'm now faced with two tasks:
1) Downgrading
-- I have a friend who has a WM5 Ameo, so I could always use some sort of firmware-copying-dumping-tool. Anyone know of any?
2) Backing up
-- I need to back everything up to the SD Card, I guess. There's enough space on my sd card to take all programs + info + etc - so can anyone recommend a _free_ application?
Thanks in advance.
Alex.
Adnan farooqui
I am also desperately looking for t-mobile ameo Rom wm5 to reverse my upgrade. I would be very greatful if you or someone can help finding original T-mobile shipped Rom. I would be greatful to that mate. Adnan
If Your keyboard has water damage then you are FUbar'd anyway since this instantly invalidates your warranty. As such you might as well use PKs black dual rom and stick with the fingertouch keyboard. The repair shop will take the keyboard apart and return you some pretty pictures of your water-soaked tapping-pad with little yellow arrows to highlight the water spots.
You have absolutely no hope of pleading with them trust me.
If you have separate insurance cover against accidental damage then the ROM you have on your phone is irrelevant and won't affect your claim, since this is different to a manufacturer's warranty.
If you don't have accidental damage cover and your friend does then....actually I can't recommend that.......
If all else fails, you could buy a new keyboard:
http://cnn.cn/shop/dopod-u1000-full-metal-keyboard-p-1939.html
(from another thread here)
Pricey, but cheaper than a new X7500.
Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Sorry
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Hey, i had the same problem but i went to sprint and change my device, the new one works perfect, my advice go back and change it.
Bigswigg said:
Hey guys, I just got my touch pro last week and now the keyboard wont work. No drops or water damage. It wont light up or anything. I dont want to have to go back to the sprint store, so if u guys have any suggestions that would be awesome. Thanks.
Click to expand...
Click to collapse
i had the same problem i went to sprint and change my device, the new one works perfect, so my advice go back to the store and replace it for a new one, take care......
Not much but maybe
Had one that same thing happened. Performed hard reset and corrected it maybe temp fix though but it worked so far about a week of good use so far.
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
kilroy1stcav said:
I had the same thing on my Verizon Pro, what I found was (I took mine apart) was that the cable had came loose from it's connector, I just had to reseat it and works perfect. By the way I bought it that way (got a great deal because it didn't work).
Click to expand...
Click to collapse
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Here's a link with the Touch Pro teardown, thanks to BigDiesel07 @ PPCGeeks. Hope this helps a bit...
http://forum.ppcgeeks.com/showthread.php?t=49932&highlight=teardown+touch+pro
G00gle26 said:
I have the same keyboard problem...it doesn't work most of the time, but once in a blue moon it will....the keyboard lights come on, but no input from keys work....so is that still a connector issue you think? Did you keyboard backlight come on?
2nd question: How do I open my TP?
Thanks.
Click to expand...
Click to collapse
I am not sure if my keys lite up or not, it has been a while, but it sounds to me like a possible connection issue with it being intermittent.
happened to me twice hopefully tp2 fixes this little issue.
same problem!!! just go to sprint, they can fix the problem... "they changed my keyboard"!!!
yah me too, i took my touch pro back to Sprint and they changed the whole touch screen part of the phone for me in 45 mins and for some reason that fixed the keyboard as well, so i guess the problem is in the touch-screen part of the phone, not the keyboard itself
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
Genius! However, i am not. Your solution worked, however i fear it may be a temporary solution? I want to get this fixed while under warranty and dumb ol' me fixing it, well, now i won't have anything to show the sprint store
zKnuckles said:
Try this. Take out the battery and pinch extremely hard on the space button to re-seat the keyboard cable.
I'm not completely sure if it will work as I got my phone replaced before I found this fix.
Try it and let me know if it helped any.
Click to expand...
Click to collapse
this worked for me! thanks!!! I was getting ready to open up the phone or go to the sprint store. You the man.
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
USAF22 said:
I hate to be the bearer of bad news, but I had the same thing happen to me. I spent probably a combined total of 8 hours on the phone with different people before I got any kind of solution. I couldn't find anything online. I was out of the initial Sprint Warranty. So Sprint said, sorry, you're gonna have to pay for a whole new device. That wouldn't work, the device was just 3 months old. So I called HTC, and at first they said there was nothing they could do either, until I talked to one person who forwarded me to PCD. They were able to fix it, for free under warranty, they replaced some RFID tag (IDK what that meant, it was in this checklist of tests they sent back) and sent the phone back. All I had to pay was shipping to their Repairs center. The bad thing was, it took them 3 weeks to work on it (only 4 days were shipping there and back). I hope I have been helpful, and I am sorry about the bad news. I know the feeling.
Click to expand...
Click to collapse
go to your phone carrier.
demand a NIB replacement. (new in box)
it states in the manufacturing warranty that you get a NIB replacement for the keyboard. it's a known problem, tell them to call the tech department or htc tech support and they will tell the rep the same thing.
Don't leave without a NEW replacement.
Don't take a refurb(mailed out) replacement.
throwback1718 said:
this is a very common problem because this also hppened to me.
the represenstative told me that putting on 3rd party software can help the keyboard going out
Click to expand...
Click to collapse
hahahahahha.
I call BS on that one. lol.
I did it... removed bat', piched key b'. it now works... eeeeeeeeyesss
Got a 0 hour touch pro less than 2months, keyboard started lagging since 2 weeks ago, then extra spaces and duplicate letters and finally died after a charging session in a hot weather day.
Removed battery and press spacebar top and bottom very hard to resit the keyboard connector fixed the issue.
Same happened to me on my Alltel CDMA Touch Pro after having owned it for about 4 weeks. It would also not shut off the screen backlight. Was very odd. Luckily, my Alltel store is literally across the alley from my house, so I ran a full backup using Sprite Backup, walked over there, and they swapped it out for a new phone within 10 minutes. Took me another 45 minutes to restore the backup, but wasn't nearly as bad as sending it away for several weeks to be repaired.
Had the X10 Mini Pro for a couple of months now, have upgraded it to 2.1, have been setting it up for my wife to use.
Lost it for a couple of weeks to the SE Repair Centre, with a dead vibrator (the vibrator was replaced).
NOW, the keyboard lights unevenly. It looks like at least one LCD in the centre is not lit up.
I only noticed this after upgrading to 2.1, though I doubt this has much to do with it.
I googled this, and there are a few complaints about this on other forums. None I could find on this one.
Has anyone been affected by the keyboard backlight(s) failing?
Hardware, or ... software?
If I can avoid another trip to the service centre, so much the better.
paul c said:
Has anyone been affected by the keyboard backlight(s) failing?
Hardware, or ... software?
If I can avoid another trip to the service centre, so much the better.
Click to expand...
Click to collapse
Same problem here. Faulty vibrator and half of the keyboard not lit. Unfortunately my X10 mini pro is not under warranty, as it was bought in Austria.
I'm very surprised by the build quality. I'm still using an X1 myself - there were a lot of complaints about that phone, but mine has not had a single problem.
Now, the X10 mini pro... it's hardly been used, literally had a sim card in it about 4 days. Rest of time has been fiddling with Android .
Oh well, backing up all apps & settings, preparing to unroot and wipe the phone, ready for another trip to the Service Centre
Android Rocks!!!
hey guys getting a vibrant with a cracked digitizer for my g/f. correct me if im wrong but it appears to be next to impossible to replace just the digitizer from what i read.... (please comment if you have done it) i see the i9000 parts are cheaper everywhere but the buttons are different. i wont be running a stock rom on it and i plan on adding a ffc so....
1. would it be physically possible to use the i9000 replacement screen on it?
2. would the buttons be a problem? not sure what the square one on the i9000 is (trackpad?) or where the home button is if there is one....
3. does anyone have a clue or am i the first to bring this up? i have searched my self silly!
4. digitizers are cheap should i just try to replace it? whos done it and what do you glue the new screen with? (i cant find any decent write ups)
i know the i9000 and vibrant have diff roms but im hopping that has to do with the radios etc. maybe i can edit the keyboard file or something to make it work.. but not sure about that pad thing...
i know this is alot of questions and i dont expect one answer. if anyone has any knowledge on any of this id really appreciate it and thanks in advance!!! id like to join the samsung crew as ive always had htc (since g1) but always secretly wanted a samsung too haha so what better excuse than to get the gf one
2rz_taco_sr5 said:
hey guys getting a vibrant with a cracked digitizer for my g/f. correct me if im wrong but it appears to be next to impossible to replace just the digitizer from what i read.... (please comment if you have done it) i see the i9000 parts are cheaper everywhere but the buttons are different. i wont be running a stock rom on it and i plan on adding a ffc so....
1. would it be physically possible to use the i9000 replacement screen on it?
2. would the buttons be a problem? not sure what the square one on the i9000 is (trackpad?) or where the home button is if there is one....
3. does anyone have a clue or am i the first to bring this up? i have searched my self silly!
4. digitizers are cheap should i just try to replace it? whos done it and what do you glue the new screen with? (i cant find any decent write ups)
i know the i9000 and vibrant have diff roms but im hopping that has to do with the radios etc. maybe i can edit the keyboard file or something to make it work.. but not sure about that pad thing...
i know this is alot of questions and i dont expect one answer. if anyone has any knowledge on any of this id really appreciate it and thanks in advance!!! id like to join the samsung crew as ive always had htc (since g1) but always secretly wanted a samsung too haha so what better excuse than to get the gf one
Click to expand...
Click to collapse
Sorry to tell you but the i9000 screen wont work at all. You will mess up your phone up big time if you start messing with the screen/digitizer as its one unit. Call samsung repair and that may be your best bet for a new screen replacement.
Sent from my SGH-T959 using XDA Premium App
It's not possible.
Call Samsung, maybe you can get it replaced for free (or really cheap).
I'm guessing that you don't have a warranty with T-Mobile, because they cover this (my screen was damaged, and I got a replacement).
The 'pad thing' is actually a big iPhone style physical home key - it's plasticky and ugly, and the reason I got the Vibrant over the i9000. You definitely won't be able to use i9000 components on the Vibrant, the i9000 screen and digitizer are built to accommodate that button, not the Vibrant's four capacitive keys.
They have the same back, though, so you can use i9000 cases and battery doors just fine.
Sent from my SGH-T959 using XDA Premium App
Well if I used the i9k parts I would swap housing LCD and digitizer all together so the button and everything would be there. I'm pretty sure it would physically go on but not sure if I can get the buttons to actually work. I know you can edit the keypad file as I've done it on my mytouch 4g but not sure if that's all I'd need to do or not :/ figured someone might have been in a situation that they tried it and couldn't hurt to ask. I have warrenty and insurance on my mytouch but I'm buying the broken vibrant out right so I'd think I could buy the parts and put them in myself cheaper than anyone would charge... I've repplaced the screens on several phones already so not a problem there. Guess that's what ill do.
Another thing Id consider is the vibrant 4g screen as it has the spot for the ffc unpainted already and everything else appears identicle but only place I see it for sale there's a min 2 per order >< has anyone ever successfully replaces just the digitizer? Its sold seporate for 35 and I read you need a new ribon as its almost impossible to pull LCD from digitizer without tearing the cable.
Hi!
I know this topic has been written about countless times! I know this because I've read most of these threads (atleast the ones I could find), but my case seems to be different..
Last year, all of a sudden, I couldn't use my stock SE headphones. It seems that when I dropped the phone in the snow, something happened.
Now, I can use any kind of headset once, every 24 hours or so... If I take them out, and then put them in again, I get a pop-up telling me the accessory is not supported.
I tried changing the ROM, hoping it would work (using miniCM7pro atm), but I still got the same problem. I really don't like the fact of turning the phone in for a repair since I had to wait 3 months when I turned in my charger that stopped working all of a sudden..
So I'm wondering... Is there any other tweak/ solution or anything that I can do to fix this?
Thanks in advance,
/Nanashi Dri
Sent from my U20i using XDA App
That looks like hardware related problem. i hope someone here will come up with some answer for this....
I don't think there is an easy fix for what you're experiencing. but here's a few steps you could take.
Make sure there is nothing in the headphone jack that shouldn't be in there (bits of dirt/grit)
Make sure none of the contacts appear damaged. There should be 4 contact points inside the jack socket (exluding headset controls)
but i think the phone will ultimately need to be sent for repair
ryant22 said:
I don't think there is an easy fix for what you're experiencing. but here's a few steps you could take.
Make sure there is nothing in the headphone jack that shouldn't be in there (bits of dirt/grit)
Make sure none of the contacts appear damaged. There should be 4 contact points inside the jack socket (exluding headset controls)
but i think the phone will ultimately need to be sent for repair
Click to expand...
Click to collapse
Hi! And thanks for your replies,
I'm not quite sure how I'm able to see the fourth one, since it's way too deep down, but I can see three of them.
Even if it will ultimately need to be sent for repair, I want to do my best to try and fix it before I send it in, since I really hate the thought of sending it in and then wait for three months. I'd rather buy an mp3 player, or and iPod or something in that case.
Nanashidri said:
I really hate the thought of sending it in and then wait for three months. I'd rather buy an mp3 player, or and iPod or something in that case.
Click to expand...
Click to collapse
That is why we call it "Sorry Ericsson" for some reason! (just kidding)
They will send it to you as soon as the parts arrive....dont worry. better you replace or repair it before it does a big problem.
Good luck!
Tommylee567 said:
That is why we call it "Sorry Ericsson" for some reason! (just kidding)
They will send it to you as soon as the parts arrive....dont worry. better you replace or repair it before it does a big problem.
Good luck!
Click to expand...
Click to collapse
Haha!
I'll see what I'll do. Worst case scenario, I'll re-install the original ROM and un-root, and then send it in. But I do want to try and fix it myself first.
Got one more year on my warranty, so time's not a real problem if I don't succeed..
Nanashidri,
at least you considered to unroot and go to stock before giving it.
i just gave it so those dummies at SE centers so they will go crazy seeing me running 2.3.7 on this phone, and they did go psycho! i indeed was laughing cause they started asking me silly questions, "how did you get this in this phone" and such questions.
i simply answered as i was roaming the internet and i did what you could not do....and they where dumb after that....funny funny (i came home and couldnt resist laughing at this matter).
my phone had camera function and my phone restarts after using it. so it was a hardware problem but they never understood it. in retaliation they just flashed the original 2.1. and for two weeks they still never got it right. i went inside the engineers room and recreated the problem. their eyes opened and tubelights switched on in their heads. at last they changed the main board and now it works!! see?
funny things happen....so dont worry. get yours changed when you still have warranty.
keep it up bro!
And this sorry ericsson is going better as "SONY" from next year! no more ericsson!