I just purchased one of these units as a color eReader with WiFi, 800 x 600, touch screen.
Turning it on I was expecting typical eReader app., but instead there was a full blown Android (missing market though). The eReader is just a Kodo App.
Android 1.5 Cupcake, 500mhz, 2 gig flash, SD
This is the Canadian version, the US version indeed presents you with a eReader App as the Home screen, but does have the Android menu.
Flashes are available for both Canada and US.
The Canadian version has ES File Explorer so adding apps. isn't hard, but the US version Needs Android SDK to get an App installed. It appears I can switch to root in a terminal.
I'm having some issuse with networking though. It surfs no problem and can download. But an RDP client connects through a local network, but can't connect through the Internet, just resets the connection. Also it can't even download an ebook from Kobo,, just does a 1.8k download, reset, 1.8 download, reset and so on. Pretty bad you can't even use it for what it was meant. The US version appears to download books from Barnes & Noble, but it's to difficult to try it with RDP.
I'm looking at trying to update to a newer Android for it and could use some pointers.
Go to the Pandigital site, go to download and scroll to the bottom, you will see where you can get the update to a tablet rather than a reader.
Couple of cautions though...it voids your warranty, you will lose the PDN's original launcher screen, and mine anyway updated to Eclair.
But I did it any way and have been able to load pretty much anything, however I can't get angry birds to work.
You must have the white Pandigital Novel. I believe it has Eclair builtin, and just butcher it with a Barnes & Nobel home/launcher. Upgrading to the OP flash gives you a normal home/launcher and the ability to add apps. Have you got Market running on it?
The black novel has similar hardware but less ram. It has Cupcake builtin and a butcher home/launcher. Upgrading to OP, still just gives you Cupcake. I have Market running on it, but need the ugly hack to get it registered.
heard anything about the 9" one from QVC?
From the picture it looks like its running the OP Platforum, with a B&N app as the Ereader. Specs. would say it needs at least Donut, but my Kobo app. on the Canadian version requires donut too, but they managed the run it on cupcake.
I like the 6" screen for reading, but a 9" tablet with the right aspect 4:3 would be awesome. I have a 10" zt180, but its a 16:9 or worse and looks long and skinny. Really messes up icon spacing when you swith portrait to landscape.
I think 16/9 is a great size for the multimedia aspect in landscape and the reader will be great in portrait. Just my opinion though. To each his own.
Pandigital
Iv'e been working on this machine for a while,I upgraded to the SH20 firmware/open platform,I had eclair andriod on it and could flash firmwares with gapps and market.Now I can't find that flash file anywhere,I been using digtal reader files to root it,but can't get past that now,I have the white 7'in one,[email protected] does not help...Can this xda site help this tablet??? I would really like to see this go into development with this site,I know it's a ****ty tab,but.It's a andriod thou...As of now my Pandigtal novel is..SH20_20110302_K_PD_IN7E_ENG_6410POP firmware,Kernel 2.6.29,Build PD_Novel 2011.03.02 ...ANY INFO,FILES,ROM'S,ETC...Would be grateful...I awlays relyed on xda to fix,flash,read wiki,and mod my EVO 4G phone,I just don't like slat#driod...People there tell yu to read the wiki,ok i do,but still. People here on xda atually help yu..slate don't..I think is would be a intresting tab to work on...Cheapest thing on the sales floor,Just don't drop it..It has a glass screen in it if yu have one,....Anybody with issues,files,roms,Just pm me if yu want to,I want to get this tab off the ground...It's not junk,just needs work,
Wpdn devel is mostly on slatedroid. Read the wiki
Avoid bricking by first downgrading to s10, then flash froyo. Or stick with s20 kewlguys. Randomblame has some roms but theyre still alpha
Sent from my X10i using XDA App
Ok,I have root using DoomLord's easy root kit,installed Amazon app store no problem, few root needed apps,etc..my question is why it says"problem parsing package,"APK file,all other apk files worked,
Sent from my PC36100 using XDA App
UPDATE!
As B&N closed operations, PanDigital has issued a free update utility which updates the firmware from what comes stock to an OPEN Android platform. Here is the link for the 7" support page:
www_pandigital_net/ANDROID (change underscore with a period as the forum would not allow me to post a direct link)
foxcartman said:
Ok,I have root using DoomLord's easy root kit,installed Amazon app store no problem, few root needed apps,etc..my question is why it says"problem parsing package,"APK file,all other apk files worked,
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
can u sent a link to doomlord's easy root?????? my bpdn has been kicking my ass!!! thank u!!
Related
I am using Nook Color to load apk files. I wanted to get the WSJ Android tablet app, http://online.wsj.com/public/page/tablet.html?mod=WSJ_footer.
It is a free app but I do not have Market access. could someone upload the apk file for the WSJ Android tablet app?
I would greatly appreciate it. Thank you.
i am not seeing that app available on market.
Someone with a Samsung galaxy tablet would see it only. i tried one at a verizon store. Same goes for nytimes tablet app
I see 2 WSJ apps on my galaxy S phone... but people are saying its just a "Short cut" i doubt thats what you're looking for
I'm not sure if this one is the one you are looking for:
http://dl.dropbox.com/u/9641665/stacktrace.android.news.wsj.lite_1.apk
Only someone with Galaxy Tab can see the Android Tablet app. It would be the official WSJ app (not the app lite) version. Thanks all for your effort so far. The app can only be seen with Galaxy Tab or other official Android tablet.
We should get more Galaxy Tab apps for the NC.
masking
Is there an app like the eris market fix that could mask your phone temporarily of course as a gtab? I would love hte NYT tablet version (though I am sure both will probably come out next year in the BN app store.
~Leko
NYTimes Tablet app is on the market, I just downloaded it
Nice!
That's great. Do you mind posting the nytimes app? I cannot access it on my Eris.
I'd really like this as well, and the NY Times tablet app!
also want WSJ android tablet app
does anybody have the WSJ (official) apk or know how to make our Nook's Market app think that we are using a tablet rather than a phone? The WSJ app only shows up for tablets.
Thanks all.
WSJ app only works on Samsung Tab
Wall Street Reader (lite) is only limited access; WSR (full) is available for purchase but then you also need the WSJ online paid subscription as well.
On Nook Color of you go here http://mobile2.wsj.com/device/index.php you get the mobile lay out. It doesn't look like the iPad app interface due to the B&N wsj offering but its pretty good.
Note: you must set the browser to "mobile" mode vs. "desktop" in setting for it to work appropriately. Otherwise, in desktop mode, it sends you to the main WSJ page.
Enjoy.
Cheers m8s!
edit: NYTimes app works great outta the box.
Official WSJ app
I am speaking about the Official WSJ app (not from Stacktrace as you mentioned in your post).
The official WSJ app is at https://market.android.com/details?id=wsj.reader_1
The app is free and does require a subscription to get the full content.
compaq74 said:
I am speaking about the Official WSJ app (not from Stacktrace as you mentioned in your post).
The official WSJ app is at https://market.android.com/details?id=wsj.reader_1
The app is free and does require a subscription to get the full content.
Click to expand...
Click to collapse
Looks like it requires Froyo...could that be the reason you don't see it? Also comments on this link claim logins are still required. Haven't tried it myself.
see next post
read the next one
WSJ apk works on CM7!!!
I've spend that last 2 morning reading the WSJ on CM7 using the official WSJ apk. It looks amazing!
WSJ
How did you get the WSJ to register your email on the nook color? I have downloaded the ap (the tablet app - same UI as on the IPAD). Its a great UI but unfortunately on the NC I cant get past the registration page.
compaq74 said:
does anybody have the WSJ (official) apk or know how to make our Nook's Market app think that we are using a tablet rather than a phone? The WSJ app only shows up for tablets.
Thanks all.
Click to expand...
Click to collapse
It shows up on mine. I've changed a number of things in my /system/build.prop. Since this app shows up for the Galaxy Tab, I don't think it's related to any of the Honeycomb preview changes. I suspect the following change will do it.
Change the line:
ro.build.characteristics=default
to:
ro.build.characteristics=tablet
If you don't have that line, add it after the ro.build.fingerprint=BLAHBLAHBLAH line on your device.
Good luck. You may have to clear your Market cache and the data for Google Services Framework and reboot afterwards.
EDIT:
Nevermind, tried on my Nexus One just adding that one line, and it wasn't enough. Looks like you'll have to spoof being a Galaxy Tab or a Xoom in addition.
I simply downloaded it from the website listed 4 posts up, from my nookcolor in DolphinHD, by clicking on the "Download app" button, which forced me to sign into my google account from there. I also needed to create a (free) user account, verify it via the sent email, and voila.. working WSJ app.
Thanks!
Has anyone found or manage to install the "USA TODAY for Tablet" on their NC? I'm trying to track down the APK but can't find it.
https://market.android.com/details?id=com.usatoday.android.tablet.news
Does anyone think updating the build.prop to match the Xoom would allow it to be downloaded from the Market on to a NC?
I use the phone version frequently and would love the tablet version on my NC. I was surprised to not see much mentioned about it on XDA. If anyone has managed to install it can you verify that it works on Honeycomb v4? I'm afraid it's going to use a different sdk version (11, not 10 that the Preview image is).
It wouldn't install because we are using the wrong sdk version but if we could get it to install, I imagine it would work. I don't think it's using anything the preview sdk didn't have. Try asking someone in the xoom forums to post the apk. They'll be the only ones who have it.
Don't forget that Honeycomb has a new UI method which this might use. Pulse now will use this, but you won't see it on anything less than Honeycomb.
Activity Fragments
Honeycomb allows developers to break the Activities of their applications into subcomponents called Fragments, and then combine them in a variety of ways to create a richer, more interactive experience. For the landscape view, Pulse allows you to open the story right there in a new fragment. This allows readers to simultaneously browse and read news stories.
Click to expand...
Click to collapse
I've cross posted in Xoom forum. Maybe someone will post it for me.
http://forum.xda-developers.com/showthread.php?t=978369
khaytsus said:
Don't forget that Honeycomb has a new UI method which this might use. Pulse now will use this, but you won't see it on anything less than Honeycomb.
Click to expand...
Click to collapse
Yeah Fragments look interesting. I don't expect the apps to work on anything below Honeycomb.
RE
Does anybody have the .apk for this? It doesnt show up in the market.
Link for USA Today APK
Here you go... (Attached)
Free version. No piracy involved.
Its one of my favorite news Apps, too. Wonder why they yanked it? When I discovered it was gone, I started keeping back-ups of my Free stuff online for this very reason.
-Kodak
mynookcolor.blogspot.com
The apk worked for me until a little while ago. Now, I get an error that I must download an updated version from the market. Searched in the market and couldnt find it
Hi, I just got the hp touchpad and I am trying to find a good ebook reader. I have calibre on my PC so I can convert to most formats. I tried out preader but it doesn't render the text very well and very laggy.
darkpower05 said:
Hi, I just got the hp touchpad and I am trying to find a good ebook reader. I have calibre on my PC so I can convert to most formats. I tried out preader but it doesn't render the text very well and very laggy.
Click to expand...
Click to collapse
Did you try preader Native? I tried another preader version and wasn't happy. Then I found com.mhwsoft.preader-native_0.9.9_all.ipk at
precentral.net/preader-native-alpha (new user so I can't post links)
and think it will serve me fine until Android is ported.
Geekzilla said:
Did you try preader Native? I tried another preader version and wasn't happy. Then I found com.mhwsoft.preader-native_0.9.9_all.ipk at
precentral.net/preader-native-alpha (new user so I can't post links)
and think it will serve me fine until Android is ported.
Click to expand...
Click to collapse
prereader on the market was the best I could find and it was junk. I'll have to check that out.
Anybody figure out how to side load into the Kindle app?
Ya, tried that but it wasn't loading my .epub book when I added it to the library.
yep, that beta/alpha version of preader is best. Its still total junk but at least its free....really though, at the point that its that awfully inefficient the guy is probably better off trying to generate html and just toss it to WebKit. I mean come on, so slow and buggy with the progress.
I'm using the kindle app on mine. Barebones but works.
I ended up buying the Touchpad Demo version from RadioShack, not realizing that it would not allow me to access the HP Market. As such, I can't download the Kindle app from there. Anyone know how I can get it to my Touchpad? I think the apps for Wed OS are .ipk, as opposed to android's .apk's. Does anyone have the Kindle.ipk?
P.S. I don't think this qualifies as asking for freeware in violation of the rules as the Kindle App is free on the market, and I just need the installation file to be able to use it. If that is incorrect, mods please remove this request. Thanks.
UPDATE:
Never mind, thanks to some of the guys here at XDA I was able to install a clean copy of the latest Web OS on my "Demo" Tablet, and register for a new Web OS account. A Demo no more, but a full fledged Web OS Tablet. I downloaded the Kindle app from the market, but now trying to figure out how to get .mobi books to show up on the Kindle App.
mes215 said:
I ended up buying the Touchpad Demo version from RadioShack, not realizing that it would not allow me to access the HP Market. As such, I can't download the Kindle app from there. Anyone know how I can get it to my Touchpad? I think the apps for Wed OS are .ipk, as opposed to android's .apk's. Does anyone have the Kindle.ipk?
P.S. I don't think this qualifies as asking for freeware in violation of the rules as the Kindle App is free on the market, and I just need the installation file to be able to use it. If that is incorrect, mods please remove this request. Thanks.
Click to expand...
Click to collapse
There is some info on this at precentral.net in the TouchPad subforum. You might take a gander as it sounds like the demo units were not supposed to be sold and may be permanently locked out of accessing the app store.
Edit: try googling this and read the thread if you haven't done so already: hp touchpad demo unit solution bypass activation
Sent from my Droid using XDA App
Is there an shook reader for webos that i can just load all of my epub files into?
Droid Charge/Gummy 1.9RC2 2.3.4 ext4
Well you can just download a free amazon book, and rename your mobi books to the /.palmkindle directory, but they show up as the name of the amazon book, and I'm pretty sure its impossible to change that because the name of the book is in the main database file for webos. More technical details can be found here
Is there anything like Aldiko for WebOS.
This isn't a real satisfactory solution. I whonder how HP could sell the Touchbook without a working ebook reader preinstalled. I guess its things like these, that made people refrain from WebOS.
Becksman said:
This isn't a real satisfactory solution. I whonder how HP could sell the Touchbook without a working ebook reader preinstalled. I guess its things like these, that made people refrain from WebOS.
Click to expand...
Click to collapse
The kindle app works great on my tp
Sent from my synergized criffvo
I use my touchpad for viewing my digital textbooks (.PDF) in class. I'm currently using adobe reader but it lags considerably. I've tried using calibre to convert them to .mobi but it didn't work.
so I'm looking for one as well..
Managed to pick up a cheap 32GB... So disappointed about the lack of a half-decent book reader, and the Kindle app doesn't seem to be available to people in the UK
I had this same problem. I tried pReader, but the version in the market took forever to load even one .mobi ebook, and froze when I tried to load a second.
The Alpha version from the preware store refused to load .mobi files at all for me - it let me select them, and said it was loading, but they never appeared in the list.
I ended up using Calibre to convert all of my ebooks to .epub, and loading these into the Alpha version of pReader - it loaded all of them (about 200) quickly, and they look OK. It is still a bit laggy and rough around the edges, but its good enough for me until someone comes up with something better (or the pReader devs release an update).
How do you get back to the main menu in the preader native version? Im stuck inside one of the books and cant get out.
edit: Nevermind I just uninstalled it and reinstalled it. I think by putting it into fulllscreen I couldnt get into the drop-down to go back. So... DO NOT PUT INTO FULLSCREEN IN DISPLAY PREFERENCES!!!
Also, if you are using pReader and haven't done this already, try setting the encoding to UTF-8.
I had all of the special characters showing up as junk before this.
Good luck.
-chad
PS - If anyone is aware of a way to sideload books into the Kindle app without the free book hack, please let me know.
sowazit2you said:
How do you get back to the main menu in the preader native version? Im stuck inside one of the books and cant get out.
edit: Nevermind I just uninstalled it and reinstalled it. I think by putting it into fulllscreen I couldnt get into the drop-down to go back. So... DO NOT PUT INTO FULLSCREEN IN DISPLAY PREFERENCES!!!
Click to expand...
Click to collapse
This took me a bit to figure out, but I did. I double-tapped toward the top half of the screen and it pulled the top menu bar back up. Similar to the bottom, where if you tap, it activates or deactivates the progress bar. What a pain in the ass and rather unintuitive if you don't know what you're doing.
Isadora said:
Managed to pick up a cheap 32GB... So disappointed about the lack of a half-decent book reader, and the Kindle app doesn't seem to be available to people in the UK
Click to expand...
Click to collapse
Have a look at my Blog, it has all the info needed to install Kindle on UK Touchpad Wroks on webOS 3.0.2
http://xeonwales.blogspot.com/2011/08/getting-started-with-your-touchpad-uk.html
Is there a way to use swype beta on a rooted 8gb nook tablet? I did a search but did not come up with much. I got it to install but I can not enable it for use.
dude...what Android version are you running?
1.4.0 (stock) series
or the CM series
Assuming 1.4.0:
Download the keyboard apk and Anycut apk file, and copy them to the root of your SD card.
1)Install Anycut and run the app to Create a New Shortcut.
2)Tap Activity > Android Keyboard Debug.
3)Create another shortcut for Accessibility and Debug settings.
4)Return to your Home screen and open Android Keyboard Debug.
5)Enable Debug mode and click Back.
6)Using Root Explorer or ES File Explorer navigate to root of your SD card and copy the keyboard apk.
7)Now navigate to /system/app and mount the directory as R/W.
8)Paste the apk file here and change the permissions to 777. (Check all the boxes.)
(These permissons work incase of the Swype Keyboard).
9)Once copied, revert access to R/O and exit the explorer, proceeding to reboot the device.
10)Run the Accessibility shortcut you created earlier.
11)Tap Input Method to select your new keyboard.
I wasnt aware there were any other options at this time other then stock for the 8gb version I think it is 1.4.2
so use the steps i gave you since it is the
stock series
Nook 8GB
424aca said:
dude...what Android version are you running?
1.4.0 (stock) series
or the CM series
Assuming 1.4.0:.....
Click to expand...
Click to collapse
Bad assumption. The NT8 does not run any software prior to 1.4.2.
Everytime I have tried to install Swype I get a message saying failed, Swype does not support this form factor.
Have they released an update that supports Nook Tablet, or 7" tablets in general?
Jesterdtm said:
Everytime I have tried to install Swype I get a message saying failed, Swype does not support this form factor.
Have they released an update that supports Nook Tablet, or 7" tablets in general?
Click to expand...
Click to collapse
I've been running it under Team-B's CM7 alpha with no problems (and BTW, it is excellent -- much improved over the version that came build in on my Droid X). Have you considered switching to a different ROM to get swype to run?
Although I can't find the thread right now, I used the alternative keyboard directions to get Swype Beta working in my rooted nook tablet. The instructions are on that thread. I've been using Swype for months now (Swyping this post).
However, I just have root and am not using any cm7/9 on it (no reason for me until bt or USB host mode is figured out). Additionally, I registered through Swype for their beta so I had the file).
Although I like Swype for portrait, it is a little laggy for landscape if you are trying to type with all of you're fingers. I think it has to do with differentiating between a swipe and fast key pushes. Others might not notice this. Additionally, there are a few bugs, such as trying to edit a word vs change cursor position... long story I won't get into, but it affects long posts or e-mails for me.
Weo said:
However, I just have root and am not using any cm7/9 on it (no reason for me until bt or USB host mode is figured out)
Click to expand...
Click to collapse
Just fyi, the nook tablet does not support Bluetooth and thus the development will not be pursuing getting it to work in custom roms.
Sent from my NookTablet using Tapatalk
Weo said:
Although I like Swype for portrait, it is a little laggy for landscape if you are trying to type with all of you're fingers. I think it has to do with frightening between a Swype and fast key pushes. Others might not notice this. Additionally, there are a few bugs, such as trying to edit a word vs change cursor position... long story I won't get into, but it affects long posts or e-mails for me.
Click to expand...
Click to collapse
I use an app called KM Keyboard Manager to automatically change from Swype in portrait mode and the default (CM9) keyboard in landscape.
Cubanluke88 said:
Just fyi, the nook tablet does not support Bluetooth and thus the development will not be pursuing getting it to work in custom roms.
Sent from my NookTablet using Tapatalk
Click to expand...
Click to collapse
It's confusing with all of the old threads where people say to wait but no one updates... With the quick innovation on consumer tablets recently, prices for better tablets have been dropping considerably, and I will probably replace the NT after summer.
Currently, without being able to use a keyboard (I write multiple papers per week, totaling approximately 3000 words) I don't really have any need for switching to CM7/9.
I purchased the NT as a transitional tablet and have been very happy adding it to my devices. Although there are still limitations to Android for many of my requirements, if I could use VoIP, keyboard and mouse (when needed), and output 1080p video, and maybe GPS (not really needed but would be nice), most of the negatives would be overshadowed... These extras would assume the same positives the NT has going for it or better.
Ideally, I will be looking at the Samsung galaxy 7.7 if it's price drops or the Toshiba Thrive 7.7 if the pricing is reasonable. Unfortunately, I will still need a laptop/desktop running windows or OSX otherwise I would just get the Asus transformer infinity when it comes out.
Weo said:
Ideally, I will be looking at the Samsung galaxy 7.7 if it's price drops or the Toshiba Thrive 7.7 if the pricing is reasonable. Unfortunately, I will still need a laptop/desktop running windows or OSX otherwise I would just get the Asus transformer infinity when it comes out.
Click to expand...
Click to collapse
there was a very recent post ( http://forum.xda-developers.com/showpost.php?p=26854804&postcount=6 ) where the member chose a nook over a ( $250 ) samsumg. i got a chuckle out of that, for sure !
i own the old toshiba thrive. it has a great ( independent ) forum with "lots" of friendly - helpful people ( http://www.thriveforums.org/forum/forum.php ).
old_fart said:
there was a very recent post ( http://forum.xda-developers.com/showpost.php?p=26854804&postcount=6 ) where the member chose a nook over a ( $250 ) samsumg. i got a chuckle out of that, for sure !
i own the old toshiba thrive. it has a great ( independent ) forum with "lots" of friendly - helpful people ( http://www.thriveforums.org/forum/forum.php ).
Click to expand...
Click to collapse
That was me.
If I had had the Nook in hand before buying the GT2-7.0, it would've been a no-brainer for me. I was spoiled by my Droid X, and wanted something with similar quality and a larger display. Found it in the 16GB Nook Tablet ($200 Certified Pre-Owned).
Happy as can be, and the community support here is outstanding!
Weo said:
Although I can't find the thread right now, I used the alternative keyboard directions to get Swype Beta working in my rooted nook tablet. The instructions are on that thread. I've been using Swype for months now (Swyping this post).
Click to expand...
Click to collapse
If you could find that thread, or just remember how, it would be awesome! I got it installed on a Chinese, Inc. tablet (once). But I lost the link I used.
wellersl said:
That was me.
If I had had the Nook in hand before buying the GT2-7.0, it would've been a no-brainer for me. I was spoiled by my Droid X, and wanted something with similar quality and a larger display. Found it in the 16GB Nook Tablet ($200 Certified Pre-Owned).
Happy as can be, and the community support here is outstanding!
If you could find that thread, or just remember how, it would be awesome! I got it installed on a Chinese, Inc. tablet (once). But I lost the link I used.
Click to expand...
Click to collapse
Original thread: http://forum.xda-developers.com/showthread.php?t=1360036
My post with how I got mine working (post #147): http://forum.xda-developers.com/showpost.php?p=20639771&postcount=147
As a side note, although I can't copy from text within dolphin HD (can with opera on NT), I can copy and paste the URL from the threads into this reply. I use the paste command in Swype: swipe from Swype button to V.
---------- Post added at 11:39 PM ---------- Previous post was at 11:16 PM ----------
old_fart said:
there was a very recent post ( http://forum.xda-developers.com/showpost.php?p=26854804&postcount=6 ) where the member chose a nook over a ( $250 ) samsumg. i got a chuckle out of that, for sure !
i own the old toshiba thrive. it has a great ( independent ) forum with "lots" of friendly - helpful people ( http://www.thriveforums.org/forum/forum.php ).
Click to expand...
Click to collapse
In the end, it really comes down to value: user expectation/performance vs price. In all honesty, I have even considered purchasing the NC for it's current price of $169 recently. However, since it still doesn't have video out, I will wait and be happy with what I have.
As is, the NT (with the help of XDA developers) has turned out to be my best device for info coming to me (although I can't access certain readings for my MBA)...unfortunately, not the best device for information coming from me going out. Plus I am happy with the portability of the 7" tablets compared to the 10".
I'm hoping that the 7.7" tablets coming out will satisfy all of my tablet requirements... which include price constraints.
While I don't plan on replacing my nook as I have a Xoom for more intensive stuff, I'm excited to see the upcoming tablets that will compete with the 7" market that the kindle fire blew out of the water. The Google nexus tablet will have great development potential but I have a feeling they will go the no expanded storage route, as they have with the galaxy nexus.
Sent from my NookTablet using Tapatalk
The Swype installer is broken - again. A couple of people have posted links to a couple of different older versions in one of the support threads. But you'd better act fast!
I downloaded the Swype beta on my NT no problem (16 Gb, 1.4.2, rooted and now running ADW Launcher). I looked around this forum for instructions on how to download an alternate keyboard and actually got it working for swiftkey and flex T9... didn't much like those though. I use swype on my phone and I really like that, but just the stock swype apk won't work - you have to go with the tablet beta. A pleasant surprise was that I didn't have to mess around with the typical alternate keyboard installation procedures (.apk installed in the /data/app + /system/app method found elsewhere on this site - use the search box if you don't know what I'm talking about).
All I had to do was download/install the swype beta from their site - after install it brings up a prompt allowing you to select swype from all the other installed keyboards, and then it just works! Also, I finally have [nearly] full copy/paste functionality: swype-a (select all) doesn't work (Force closes whatever program you're currently working with), but swype-c (copy), swype v (paste), and swype x (cut) work just fine now.
Edit: clarified the info about 'select all' - not only does it not work, but it actually crashes whatever program you're trying to select text in - very important detail!
Am I missing something here? App is not compatible with some of your devices.
Htc Evo- check
Transformer Tablet- no check
I need to understand the developer side of this coin. I have been trying to persuade Jawbone to update their android app "Jawbone Companion" to support my tablet. I don't know, but I assume their would be a publisher option in Google Play to add or delete supported devices so that they cannot be installed on those from the Play store. For example, I had to go to the website to find the app because search shows no results on the tablet.
It's a bluetooth headset. It supports 2.1+edr. App supported on Android OS 4.0, OS 2.3 and select OS 2.2 phones. Transformer tf300 has bluetooth. It supports 3.0+edr. It has ICS and is certainly more capable than a 2.2 phone.
Sooo the only difference I see from this side is a bigger screen. I have emailed at least 3 app makers that I use frequently and they just keep saying it's not tablet supported. So do they just have to add devices to some file that cross checks with Google Play or is the code for my tablet so drastically different that they would have to write a whole new app for tablets?
A technical explanation link of the whole developer process regarding this would be nice.
Update to OP
I have found a method of downloading apk files in the Chrome browser with the APK Downloader extension. It only works with Chrome and I logged into my wife's account, did a quick search for my apps in question, then proceeded to download them to pc by making play think it was sending the apk to my wife's "supported" phone. Then I manually transferred the apks to my "unsupported" tablet where they are now running fine, no errors and no resolution problems.
I have emailed the developers of these apps and they have blown me off by saying that tablets in general are not supported, I emailed them all back telling them their apps were working fine and I didn't understand why they couldn't have allowed me to just download it the easy way.
So are they just being lazy? This just reinforces my reasoning that the phone and tablet are about the same and don't require any more coding than any other app that has problems on certain phones. Seems to me as long as the resolution is high enough and it allows auto rotation that any phone app should run on a tablet, and I don't see why they all keep telling me apps are not supported.
Until then I guess I'll just get my apps the way I described.
yap the apkdownloader would be the way i recomended to you =)
dunno why they dont support tablets
in some cases u dont have to understand them
feel lucky u find a way to make it work