Hi all,
I've had my x10a for more than a month now, running 2.1 global and everything seems great. However, there is one thing that kind of bothers me. With the stock screen protector installed, I kind of feel that i can't swipe on the screen smoothly, lots of friction going on and the responsiveness isn't as great. This especially annoys me when I play Fruit Ninja, comparing with my ipod touch first gen. There is a noticeable delay when I swipe across the screen on my x10.
I'm wondering, will the sensitivity increase by a bit? ( im not looking for iphone4 sensitivity here, just wondering if it would increase after I install an alternative protector )
Do you guys suggest that I remove the stock protector and install a third party screen protector?
DangerPanda said:
Hi all,
I've had my x10a for more than a month now, running 2.1 global and everything seems great. However, there is one thing that kind of bothers me. With the stock screen protector installed, I kind of feel that i can't swipe on the screen smoothly, lots of friction going on and the responsiveness isn't as great. This especially annoys me when I play Fruit Ninja, comparing with my ipod touch first gen. There is a noticeable delay when I swipe across the screen on my x10.
I'm wondering, will the sensitivity increase by a bit? ( im not looking for iphone4 sensitivity here, just wondering if it would increase after I install an alternative protector )
Do you guys suggest that I remove the stock protector and install a third party screen protector?
Click to expand...
Click to collapse
maybe clean your screen cuz u have too much grease/dirt on it? or maybe use a better quality screen protector?
dk2000zx said:
maybe clean your screen cuz u have too much grease/dirt on it? or maybe use a better quality screen protector?
Click to expand...
Click to collapse
Thanks for your input but I always keep my cellphone clean. and the whole point of this thread is asking whether using a different screen protector than the stock will help so that does not really answer my question.
DangerPanda said:
Thanks for your input but I always keep my cellphone clean. and the whole point of this thread is asking whether using a different screen protector than the stock will help so that does not really answer my question.
Click to expand...
Click to collapse
do you have the uber thick one on your handset? that is the one I have and its pretty sensitive. I would think a thiner one would be more sensitive
What kind of screen protector comes stock, all I have ever got on any phone was the cheap shipping plastic which is suppose to be removed, although I do see dorks walking around with it...
Sent from my T-Mobile G2 using XDA App
I took the stock screen protectors off and it's the worst. I've never had a touch screen work so bad. The only reason I haven't installed another is because the phone is defective, and I have to wait on rogers to get the replacement.
IMO if you want to take the stock screen protectors off, put a high quality one on right after. Also, I've been using the phone with no screen protector for about 2 months and I haven't scratched the screen, which is pretty impressive.
Yeah, I've removed the thin plastic that came with it, but it seems there's something more by looking at it's edges. Tried to remove it but wasn't successful in doing so...
Dalamak said:
What kind of screen protector comes stock, all I have ever got on any phone was the cheap shipping plastic which is suppose to be removed, although I do see dorks walking around with it...
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
The X10 actually comes with a stock screen protector unlike other phones.
Haha no it's not the huge piece of tape you are talking about
awmilton said:
I took the stock screen protectors off and it's the worst. I've never had a touch screen work so bad. The only reason I haven't installed another is because the phone is defective, and I have to wait on rogers to get the replacement.
IMO if you want to take the stock screen protectors off, put a high quality one on right after. Also, I've been using the phone with no screen protector for about 2 months and I haven't scratched the screen, which is pretty impressive.
Click to expand...
Click to collapse
awmilton, by worst, do you mean that the stock screen protector is worst?
Or the screen under it is the worst you've seen?
Can anyone tell me how's the screen's performance without protector compared to the screen with protector on it?
X10 actually comes with the worst capacitive screen I've ever seen! Even without the protector the responsiveness is poor and most of the times it's hard to unlock when receiving a call!
reptile64 said:
X10 actually comes with the worst capacitive screen I've ever seen! Even without the protector the responsiveness is poor and most of the times it's hard to unlock when receiving a call!
Click to expand...
Click to collapse
That might just be your phone's problem.. mine is just like my ipid touch...
Sent from my X10i using XDA App
DangerPanda said:
awmilton, by worst, do you mean that the stock screen protector is worst?
Or the screen under it is the worst you've seen?
Can anyone tell me how's the screen's performance without protector compared to the screen with protector on it?
Click to expand...
Click to collapse
DangerPanda
The screen under the stock screen protector is the worst. And I'm referring to touch sensitivity, the images displayed by the x10 are quite nice.
So to answer your question, the screen's performance, for me, was worse after removing the stock screen protector. I've heard rumors that there are actually 2 stock screen protectors shipped on the phone. I'm nervous to start picking at the edges again, but if it's anything like the potential "outer" screen protector it's there but hard to see and difficult to take off.
Does anyone know if there are actually two screen protectors applied by sony before shipping?
Wow...I didn't even know it came with a screen protector lol. Well I'm removing it because it collects too much smudge/
awmilton said:
DangerPanda
The screen under the stock screen protector is the worst. And I'm referring to touch sensitivity, the images displayed by the x10 are quite nice.
So to answer your question, the screen's performance, for me, was worse after removing the stock screen protector. I've heard rumors that there are actually 2 stock screen protectors shipped on the phone. I'm nervous to start picking at the edges again, but if it's anything like the potential "outer" screen protector it's there but hard to see and difficult to take off.
Does anyone know if there are actually two screen protectors applied by sony before shipping?
Click to expand...
Click to collapse
Ahh that's a bummer. Thanks for sharing though, I'll probably just leave the protector on then.
Jmercy09 said:
Wow...I didn't even know it came with a screen protector lol. Well I'm removing it because it collects too much smudge/
Click to expand...
Click to collapse
Please let us know how you feel about the screen after you've removed it
awmilton said:
DangerPanda
The screen under the stock screen protector is the worst. And I'm referring to touch sensitivity, the images displayed by the x10 are quite nice.
So to answer your question, the screen's performance, for me, was worse after removing the stock screen protector. I've heard rumors that there are actually 2 stock screen protectors shipped on the phone. I'm nervous to start picking at the edges again, but if it's anything like the potential "outer" screen protector it's there but hard to see and difficult to take off.
Does anyone know if there are actually two screen protectors applied by sony before shipping?
Click to expand...
Click to collapse
there's is already a "screen protector" pre-applied on the x10. it's another kind of screen protector which i forgotten the term for it..and inside the box there is also a cheapo screen protector..so if u had use the cheapo screen protector..u are having 2 screen protector on ur x10.
anyway, the "screen protector" can actually be taken off,required abit of skill though. i had heard others removing it and comment tat it is much much more responsive.
but in my opinion i would not have taken it off,it was supposed to give more protection for our phone..surely SE dont put it there for no reason..
All that bad reaction especially in games has nothing to do with the screen, it's all about performance! 3D games with the x10 are horrible and mostly unplayable, you gonna feel if you try an Samsung galaxy!
Sony set the maximum fps that could be reached to 32.. which is in my eyes not smooth..
So for games you need another phone...
hehe i take on the protector that come in the box...so i have two.
The sheap one is terrible so i have ordered a new one.
But i will leave the one from se on even if i put on the new one.
Mine is from the UK and I didn't see one on my phone or in the box apart from the one on the screen that you are meant to take off.
I find that the screen does not respond well if you have sweaty fingers or even when there a drop of water on it but other than that, it is fine for me.
I got a screen protector from Stealth Guard now and it is very easy to apply. Now it works even with sweaty fingers and rain on it. This protector may not be for everyone though as my mates have trouble using it.
k1018277 said:
Mine is from the UK and I didn't see one on my phone or in the box apart from the one on the screen that you are meant to take off
Click to expand...
Click to collapse
Yes, I don't think UK phones have a screen protector on, unless it's really difficult to see and remove...
Can anyone post any photos of the one that comes with the phone?
shooi said:
Yes, I don't think UK phones have a screen protector on, unless it's really difficult to see and remove...
Can anyone post any photos of the one that comes with the phone?
Click to expand...
Click to collapse
Yeah it's almost invisible.
I have removed both protectors that were on the screen. The only negative point is that its more exposed to scratches, nothing that a new thinner protector wont cure the sensitivity is a little better I guess but I think SE's bloatware kinda screws up the phones performance anyhow... Bottom line is that the phones screen is sensitive enough but the software is too slow, although I havent tried the 2.2 custom rom yet to verify this
Edit: Nor have I tried to uninstall the most resource demanding apps like timescape etc.
Related
Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.
Hey guys, please vote here - who use screen protector with own TP2
And those who use, please describe here who is the manufacturer of your screen protector and your experience, how good is it for you.
Most recent HTC devices have come with pretty good screen protectors included in the box. I didn't use a screen protector on my first device, and I'm not making that mistake again.
anyone knows why they don't install it from the factory?
I voted and i own an x1. I use.
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
ohyeahar said:
I've seen threads like this before and I've always wondered why there is even a debate on this topic. Why would anyone not use a screen protector?
My theory: The next person you see using a touch screen device with no screen protector, probably doesn't use one because he messed it up when applying it on the device.
Click to expand...
Click to collapse
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
test157 said:
well the picture quality without it is much better, isn't it? I have now 3M protector on my HTC herald, and it doesn't look as clean as without it.
Click to expand...
Click to collapse
That's true, but when you use your device for some months without any protector, it will never be so clear as with a screenprotector (that you can replace when needed )
Ranney
Based on what I read in the accessories forum, I decided to try a Martin Fields one. Had it on for 2 days now - so far, so good. The one that came with the phone kept peeling off at the bottom edge near the buttons.
I didn't bother with my Vario III, as the ones I tried seriously affected the screen responsivness. Of course it got a key scratch in the first 3 months:-(
On my TP2 I installed the supplied one, and will get a Martin Fields one.
However I've got to return the unit (dodgy radio), so it is vital not to scratch it before returning it!
I messed upp my original screen protector
So i bought the Copter screenprotector from Skalshop.se it's a bit rubbery, but other than that it works good. It came with some liquid spray for aplying the protection. A bit tricky to apply but worked good in the end.
Martin Fields - where from you guys are buying them? I don't see them at ebay for TP2
also - are they really the BEST? or they just have the highest price?
The store from which I bought my TP2 gave me another screen protector - I haven't used the one that came with the device. Probably cost them less than US$1-2 to buy in bulk - I never pay more than US$8 for one retail
Using the one supplied with the evice and it works perfetly (I was against screen protetors when I had a Hermes, but with TP I can barely see it)
I once had a device and when I applied the screen protector I hated it. It improved sunlight visibility by refracting the light, unfortunately this made it harder to read fine print on the screen. I also couldn't remove the protector and was stuck with it. Another one I had tried before that one which was removable, reduced sensitivity too much.
Those are reasons not use one. But as long as the available protectors can be removed in case you don't like them, then it's worth trying them out. That way you don't risk your screen unecessarily.
SEQ said:
You should use the Crystal Clear type. You sometimes don't even noticed that it's being installed.
Click to expand...
Click to collapse
That's right! I use it and it's better than the one that HTC gives us: I have a new one because it was removed while in my pocket.. But now I'm happier!
I´m using touchscreen phones for many years (since my first PALM ) and i´ve noticed that the new screens are much more resistent. I think that you loose quality if you use a screen protector.
Just don´t put your phone in the same pocket that coins, keys,... and use it´s cover when putting it in a bag.
one other advantage with a phone like this should you choose not to use a screen protector is that since the phone has such a large screen and it's so touch optimized you won't get as much wear and tear on the common points of contact (like the "e" on the onscreen keyboard).
I use Proporta Screen Protectors. After I had used then in my Asus P535 I do not want another brand. They protect very well the screen, they were washable and also doesn't change too much the sensation of the touch with the pen or even with fingers.
I dont use one for a few reasons. I dont put my TP2 in any pocket with coins etc. I am pretty careful with it.
Although most importantly im insured on it, accidental damage w/ no excess to when the time comes it gets a bit dodgy ill smash it up and get a new one. If ive still got the TP2 when my contract runs out/upgrade ill probably wap a screen protector on then.
Today I received a screen protector in the mail (came free with a case), so I decided to change out the old one that came pre installed on the X10. Of course once everything was removed and when I started to apply the new one, all of the dust in the house was magically attracted to the new one, rendering it useless.
I'm now stuck without a screen protector, and have growing paranoia that my screen is going to get messed up. Looks like I'll have to order a new one.
Until then, does anyone have an X10 with the protector removed? Has your screen scratched after extended normal use?
I'll probably be stuck without one for a week so I hope it lasts.
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen. There is one user however, who's succeeded in cracking the screen -- I remember having read a thread about it
javagreen said:
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen. There is one user however, who's succeeded in cracking the screen -- I remember having read a thread about it
Click to expand...
Click to collapse
i hav x10i... my screen has scratches like 7-8.. theyre like minor scratches bt still
:'(
javagreen said:
Truth : I suspect you won't have much success, if any, finding someone who's successfully scratched their X10 screen.
Click to expand...
Click to collapse
Well you've got at least two now, momerbk and gavriel18 on another thread has stated his is "mashed" now due to not having one, so I'd get one on asap.
Not forgetting the guy who's was run over, that was pretty scratched
I've gotten some minor scratches but they are very hard to see... and from my personal tests the X10 screen hides scratches better then the Dell Streak
tigger69 said:
Not forgetting the guy who's was run over, that was pretty scratched
Click to expand...
Click to collapse
Rofl, I saw that one as well, although it doesn't really fit into my "normal use" category
I'm pretty careful with my stuff, I'll just have to avoid buses until I get a new screen protector lol.
This thread is somewhat putting me at ease though!
Semi related: Are there any scratch test videos for the X10?
Multiple scratches and a chip. Still don't know how I managed that...
haha lol. I scratched mine within 3 weeks ... I have now one big scratch and a few little scratches blegh.
Are you guys sure you really scratched the glass or is it just the original screen protector? The original screen protector scratches very easily. That is why I removed mine and replaced it with something better.
mine is still mint, I work in bean processing plant(dusty), spend most of my days off at the beach with the kids. That's no proof that it won't get scratched one day but I doubt it will make people think less of me if i have a scratch on my screen
naplesbill said:
Are you guys sure you really scratched the glass or is it just the original screen protector? The original screen protector scratches very easily. That is why I removed mine and replaced it with something better.
Click to expand...
Click to collapse
Lol, I never had a stock screen protector with mine
T-Mobile UK
Z3X said:
Lol, I never had a stock screen protector with mine
T-Mobile UK
Click to expand...
Click to collapse
I'm pretty sure they all have them stock. Take a closer look at the lower part of the screen near the buttons. You should be able to see it there. it is an exact fit protector so it's almost impossible to see that it's there.
naplesbill said:
I'm pretty sure they all have them stock. Take a closer look at the lower part of the screen near the buttons. You should be able to see it there. it is an exact fit protector so it's almost impossible to see that it's there.
Click to expand...
Click to collapse
Hmm it does look that way, although I can't seem to get it if it's is one) off
Another quick question:
I've heard that some of the better screen protectors can actually hide previous scratches once they are applied, is that actually true?
I've ordered both the clear coat screen protector and also that free stealthguard protection thing, so I'm hoping that one of those will be sufficient
Z3X said:
Hmm it does look that way, although I can't seem to get it if it's is one) off
Click to expand...
Click to collapse
I put one of the free stealthguards on mine Saturday. I only used he screen guard not the full body though. It was a little difficult to get the oem screen protector off but only until you get it started. Once it starts peeling it comes off fairly easy.
i have my phone in a leather case without a screen protecter, never been a fan of them and my screen is immaculate... so far it is only almost 3 weeks old though
naplesbill said:
I put one of the free stealthguards on mine Saturday. I only used he screen guard not the full body though. It was a little difficult to get the oem screen protector off but only until you get it started. Once it starts peeling it comes off fairly easy.
Click to expand...
Click to collapse
wow just found it, i never noticed it LOL, it's a thick screen protector, sometimes when texting i noticed the phone sometimes missed keys wonder if it was because of the protector.
so can anyone confirm that there phone has been scratched without the OEM protector?
I think that extra thick shield is supposed to act as a "shatter resistant protector" so that if you do happen to smash the glass you don't get shards and splinters everywhere. It is much thicker than any screen protector i've seen before and taking it off will ruin it.
I took my oem one off and now have a deep scratch , not a clue how I did it. If I could go back I would definitely use protection lol. They may not be as pretty as the bare screen but they work.
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
hkguy783 said:
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
Click to expand...
Click to collapse
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
reptile64 said:
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
Click to expand...
Click to collapse
would blow dryer make it easier?
When I removed mine from the arc I followed some advice and used a needle to pick at a corner. This did it straight away after many failed attempts with my nails. Just be careful you don't scratch the screen underneath but you should be fine.
However like I said in another thread I wouldn't recommend it, I think you should not see the factory applied screen protector as a screnn protector but rather part of the screen. It is applied perfectly and no matter how hard you try doing it yourself, you'll never manage to apply one as well...
Also on my arc I never actually notice that much difference in glare...
If you choose to stick a protector on it, I wrote this guild on the best way (imo) to apply a protector, enjoy!
http://forum.xda-developers.com/show....php?t=1652567
Fortunately I didn't notice any of hardware problems mentioned here (multitouch, light bleed), but there is one pretty annoying "feature" regarding display - it's polarized in such way that it's unusable with polarized glasses in portrait orientation - why would they do that, i didn't experience that on any other phone or tablet that I own. To be honest, if i knew that before, might even reconsider buying it...
Don't use polarized glasses, simple. Polarized feature is not necessary.
Well, you could call that the easiest solution ?. Funny enough, I haven't been using polarized sunglasses for long, just bought my first pair couple of months ago - guess I should go back to regular aviators.
denzel09 said:
Don't use polarized glasses, simple. Polarized feature is not necessary.
Click to expand...
Click to collapse
So we'll just replace expensive/quality glasses with ones that have poor glare reduction then :\
Yeah, this sucks. VERTICAL polarization on a phone screen, what the heck were they thinking!?!? 95% of phones are 45 degree or at least horizontal
CosmicDan said:
So we'll just replace expensive/quality glasses with ones that have poor glare reduction then :\
Click to expand...
Click to collapse
Yes. If you want use this.
The real question is: do you really can see the screen of this phone or any other phone with sun glasses? I can hardly see the Note 9 screen with 1000 nits... C'mon
denzel09 said:
Yes. If you want use this.
The real question is: do you really can see the screen of this phone or any other phone with sun glasses? I can hardly see the Note 9 screen with 1000 nits... C'mon
Click to expand...
Click to collapse
Yes, I can see other phones screen 100% fine with polarized sunglasses. That's the whole point of polarization in sunglasses - it only reduces the brightness of light that is too bright, rather than cheap sunglasses that just dim everything.
98% of sunglasses use vertical aligned polarization, which is why like 98% of LCD displays do NOT use vertical polarization - to avoid 100% photon neutralization.
Watch a video on YouTube for the science or something. It's a crap move from whoever made the LCD on this device no matter how you spin it.
A bit of googling discovered that Xiaomi used similar screen in other recent models (redmi Note 5, Mi A2). Apparently fitting glass screen protector can fix the issue. Anyone can confirm this? I never used screen protectors, but might give it a try if it helps.
satanius said:
A bit of googling discovered that Xiaomi used similar screen in other recent models (redmi Note 5, Mi A2). Apparently fitting glass screen protector can fix the issue. Anyone can confirm this? I never used screen protectors, but might give it a try if it helps.
Click to expand...
Click to collapse
Simple glass screen protector? Maybe someone with polarized sun glasses can do a try
There are many glass screen protect for pocof1 on amazon. What do you think about them?
https://www.amazon.it/s/?ref=nb_sb_...creen+glass&rh=i:aps,k:pocophone+screen+glass
Is there a way, without screen glass polarized, and with one of them screen protector, see the same if this idea will work?
Edit: should be work: https://www.youtube.com/watch?v=67p5phutxc4
Ordered screen glass protector from the amazon.
same problem here! and funny enough i havent been using polarized glasses for few years then i bought a pair a month ago! i've bought a screen protector (tempered glass) on amazon https://www.amazon.it/gp/product/B07GTJM4C4/ few days ago, i'll let you know if it solves the problem.
satanius said:
Apparently fitting glass screen protector can fix the issue. Anyone can confirm this? I never used screen protectors, but might give it a try if it helps.
Click to expand...
Click to collapse
It's a while since I did physics at school but I can't imagine that much has changed in terms of the way light travels. I don't think a simple screen protector is going to have any impact on the orientation of polarisation of light from your screen.
I don't mean to be unhelpful, but it strikes me that the only way round this is the most obvious one of removing your spectacles
Edit - just googled and found this interesting thread addressing the same issue with an HTC 10. One poster suggests using a waveplate to scatter the orientation, but this is a bit ridiculous since I'm pretty sure your touchscreen would be massively compromised (waveplates need to be fairly thick and are rigid as far as I know).
Take your glasses off or use the phone landscape I'd say
It doesn't make sense to me either, but some Redmi Not 5 users in this thread claim that it did help. Doesn't hurt to try, I ordered tempered glass from aliexpress, will see.
I've ordered the glass protector just for protection but I'd be nice if it worked like it does in this video posted earlier https://www.youtube.com/watch?v=67p5phutxc4
Edit: I remembered I've got a spare glass for another phone at home, I'll try as soon as I get my lunch break and I'll let you know.
fireblade said:
I've ordered the glass protector just for protection but I'd be nice if it worked like it does in this video posted earlier https://www.youtube.com/watch?v=67p5phutxc4
Edit: I remembered I've got a spare glass for another phone at home, I'll try as soon as I get my lunch break and I'll let you know.
Click to expand...
Click to collapse
I posted the video in post #8
@fireblade Sorry I didn't have time to follow the link earlier. Really interesting! Presumably the screen protector and/or its own protective film (which you can see in the video) must between them scatter the light?
I would be careful about removing the film from the protector, since this might be the bit that's doing the magic.
Consider also that your overall brightness is likely to be reduced somewhat by this scatter.
Good luck! I'll be really interested to hear how this works out
as promised i tested the poco with an old screen protector and i can say it works a beauty! its not crystal clear but its definately readable! and i just tried holding the glass between the lcd and the sunglasses, it may look better once applied properly. sorry for the poor quality pics but photos were taken with lenovo p2 (sh*tty camera) and i was in a rush.
cheers
fireblade said:
as promised i tested the poco with an old screen protector and i can say it works a beauty! its not crystal clear but its definately readable! and i just tried holding the glass between the lcd and the sunglasses, it may look better once applied properly. sorry for the poor quality pics but photos were taken with lenovo p2 (sh*tty camera) and i was in a rush.
cheers
Click to expand...
Click to collapse
You need to remove the protective film (1 Back, etc..) of glass protector to be sure that all works
I don't think it makes any difference since it is a normal plastic film.. But I'll check it properly tomorrow when I get the poco's tempered glass.
I think it might be due to quantum properties of light, this video seems to explain a similar concept, not sure though
https://youtu.be/zcqZHYo7ONs
fireblade said:
I don't think it makes any difference since it is a normal plastic film.. But I'll check it properly tomorrow when I get the poco's tempered glass.
Click to expand...
Click to collapse
Probably no difference, but better to be sure.