Hello everybody !
I have done a very very big mistake !!!
I flashed my hd2 with that wonderful ROM core cell v4.1. Everythings were OK....
I just change the language into french. The mobile has to restart and then it doesn't boot...
That's my fault because i didn't check my radio before and i think that my radio wasn't enough recent...
And now it doen't boot ! It stay at the firt page "cell series get you connected"
Can you help me PLEASE ???
Mickael
salut,
as tu essaye de flasher ta radio en mettant ton hd2 en mode bootloader? (demarrer en laissont le bouton volume bas appuyé)
Oui j'ai essayé en formatant ma micro sd en 32 bits et en prenant une rom renommé leoimg.nbh --> rien ne se passe
Apres j'ai juste mis sur la sd une radio 2.0.8 je crois et toujours pareil...
J'ai suivi quelques forums mais ca n'a rien changé, je reste bloqué sur la premiere page de presentation...
Merci pour ton aide.
kael61 said:
Hello everybody !
I have done a very very big mistake !!!
I flashed my hd2 with that wonderful ROM core cell v4.1. Everythings were OK....
I just change the language into french. The mobile has to restart and then it doesn't boot...
That's my fault because i didn't check my radio before and i think that my radio wasn't enough recent...
And now it doen't boot ! It stay at the firt page "cell series get you connected"
Can you help me PLEASE ???
Mickael
Click to expand...
Click to collapse
Switch phone off, then hold volume down button in and switch on (will boot into multi coloured screen), connect to pc and when "usb" shows on screen then flash the correct radio. There is no need for the device to boot up first for this to work.
When i hold volume down button and switch on i don't have multi colored screen i just have the firt page before booting :
HTC
smart mobility
CELL series
Get you connected
Are you sure you are holding the Volume down button in and keeping it pressed down while switching the phone on? Unless your volume button is not working it should boot into the bootloader (multi coloured) screen.
pull off the sd card before hold volume down and start the phone
Related
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
apog971 said:
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
Click to expand...
Click to collapse
It`s not corrupt and if you`re able to get into bootloader just flash the original ROM. Btw, did you unlock your phone with Olipro`s unlocker before trying all this?
apog971 said:
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
Click to expand...
Click to collapse
dp a hard reset by:
Pressing the volume button downwords and at the same time press the reset button at the back of the phone it will bring you to the hard reset process to restore the rom try this maybe it ill help !!!!
I think the moron hasn't bothered using the unlocker and so the bootloader rejected the NBH, and he needs to do set 14 0 and set 16 0 from mtty
I have the same problem and yes i admitt i didn´t use the unlocker. Now im going for hardreset, and it says to me press the action key. Which one is it? i keep pressing all buttons and nothing happens. even if i press the cammera. Plz help guys.
Ok i managed to go in hard reset. The problem is even if i press action and then press boot. All i get is flashing green light. Plz help. i also can go in bootloader moder. So i could use a differnt rom. I have tmobile ameo. Perhaps the original rom is up here somethere so my machine wont recect it.
If you have t-mobile ameo use the t-mobile 005 ROM it will get you working again - then use Olipro's amazing unlocker!
ok thank you can you supply with a link plz i don´t know where to find it. Thank you.
MY HTC HD2 is stuck on "please loading wait" ...
try many things but still stucks on it .. someone can help me ..
i can't enter in bootloader mode, my device start when i press the VOL + and - but not in bootloader mode ...
NEED HELP please
weelo97245 said:
my device start when i press the VOL + and -
Click to expand...
Click to collapse
its not vol + and -
hold vol -
keep holding vol -
tap and release power
keep holding vol - until bootloader appears.
weelo97245 said:
MY HTC HD2 is stuck on "please loading wait" ...
try many things but still stucks on it .. someone can help me ..
i can't enter in bootloader mode, my device start when i press the VOL + and - but not in bootloader mode ...
NEED HELP please
Click to expand...
Click to collapse
Hope my french is OK?
Bonjour Weelo, assurez-vous la balle usb est branché. Enlever la batterie, maintenant maintenez enfoncé le bouton de volume, mettre la batterie en. Appuyez sur le bouton d'alimentation. Maintenant l'écran de chargeur de démarrage est apparu, et est il dire usb sur le bas de l'écran. Dans l'affirmative, maintenant vous pouvez clignoter le rom
Russ
DAY 1:
hello,
i tried to install custom rom on bobarry k10se tablet (chinese tablet) has mediatake processor.
1) I wrongly did boot recovery with twrp image file with flashify mobile apk-- its showing bootloop only
2) then at recovery mode I tried to do wipe data and then wipe partion then I tried to install rom from sdcard but it shows - installation aborted.
3) at last i did back up & restore in recovery mode.. god.. its stuck to the flashing green robot screen and wont do anything else.
Please help me what should I do now, after starting the tablet it shows green flashing robot with written "installing system update" and nothing happnes.
I know I have done lots of mistake and tried to install custom RR 5.8.0 which failed.
DAY 2:
i think its hard bricked now. its like switched off. if i connect to the pc via usb, there is only connecting-disconnecting sound.. nothing else happens.
i used sp flash tool with similar kind of firmware, the result shows- s_ft_unable_dram_fail (4032).
Can someone give me bobarry k10se tablet stock ram (mtk6580, android 5.1, 4gb ram)
pls help me
please help to find similar kind of stock rom for my tablet
none is here to help me out???
Bonjour, j'ai un problème de démarrage sur ma tablette Bobarry elle me marque Boot error et je ne sais plus quoi faire,j'ai essayé quelques tuto mais rien alors je compte sur vous merci d'avance Wiwi 66.
Garreau said:
Bonjour, j'ai un problème de démarrage sur ma tablette Bobarry elle me marque Boot error et je ne sais plus quoi faire,j'ai essayé quelques tuto mais rien alors je compte sur vous merci d'avance Wiwi 66.
Click to expand...
Click to collapse
please use the English language
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Hi, I am also looking for BOBARRY K107SE 4G LTE stock rom. Any help will be appreciated. Regards.
Hello , first sorry for my english but i m french, secondly , i post on the xda forum to try to find a solution to my problem and i Hope Solène ca hello me. I have an Archos 97c with broken screen that i was given , i have changed thé screen and it works fine but when i reboot it , that was impossible to find thé unlocking diagram , so i did a hard reset, and then it was impossible to registre a New mail adress , so i decided to flash a New firmware . I found a New one that i flashed with SP flashtool and it works but it must not be exactly the right one because thé screen works , i have a back light and preloader recognized by flashtool but nothing boot and i havent Access to recouvert anymore . M'y questions are : IS that Anyone have thé right rom or does Anyone Can help me to repair this ? I Hope that everyone understand what i Wang to Say.
up ! is there anyone to help me ????
edit: there s something new , yesterday i wanted to try a trick with the pc but it was the wrong usb cable and when pressing key combinations , the tablet tells something that i dont ear but i just understand at the end " touch the screen" so since , i try to do it again and irealized that I could take screenshots with volume down and power , i see the light and the creen is fonctional because i can turn off or reboot
by touching the screen a bit randomly ...
Tu as trouver une solution a ton problème ai la même tablette que toi et j'ai flasher avec le firmware Archos 97c Platinum a 994 mb et c'est la merde mon écran est devenu noir avec pixel je vois qu'il redémarre et je l'éteint cœur toi au hasard si ta trouver la solution contact moi par Messenger laurentvaituahelme ou par mail [email protected]
good evening I have an x96q box stuck on the x96q boot logo when I put it the firmware by sd card the green bar progresses by a quarter and does not move the box flashes blue. can you help me.
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
guisel2003 said:
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
Click to expand...
Click to collapse
Bonsoir and welcome to XDA,
English is the preferred language in the forums, you can use google translate.
Hello all i also have but bricked X96Q . when i plug my box in PC with 100% good USB cable (it was working with another box in past) and drivers are installed, i try it in Win7 and also Win10 , i always get some results and it is: Sound i turn device in PC and it is detected and in 2sec another sound device is disconnected.
SW used is: LiveSuitPack1.11
Please help.
guisel2003 said:
good evening I have an x96q box stuck on the x96q boot logo when I put it the firmware by sd card the green bar progresses by a quarter and does not move the box flashes blue. can you help me.
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
Click to expand...
Click to collapse
You have had to wait longer time until the green bar has moved until the end. it takes about 10 minutes. If you stop before, I guess the box is bricked.
sakalsk said:
Hello all i also have but bricked X96Q . when i plug my box in PC with 100% good USB cable (it was working with another box in past) and drivers are installed, i try it in Win7 and also Win10 , i always get some results and it is: Sound i turn device in PC and it is detected and in 2sec another sound device is disconnected.
SW used is: LiveSuitPack1.11
Please help.
Click to expand...
Click to collapse
Which firmware did you have installed?