MY HTC HD2 is stuck on "please loading wait" ...
try many things but still stucks on it .. someone can help me ..
i can't enter in bootloader mode, my device start when i press the VOL + and - but not in bootloader mode ...
NEED HELP please
weelo97245 said:
my device start when i press the VOL + and -
Click to expand...
Click to collapse
its not vol + and -
hold vol -
keep holding vol -
tap and release power
keep holding vol - until bootloader appears.
weelo97245 said:
MY HTC HD2 is stuck on "please loading wait" ...
try many things but still stucks on it .. someone can help me ..
i can't enter in bootloader mode, my device start when i press the VOL + and - but not in bootloader mode ...
NEED HELP please
Click to expand...
Click to collapse
Hope my french is OK?
Bonjour Weelo, assurez-vous la balle usb est branché. Enlever la batterie, maintenant maintenez enfoncé le bouton de volume, mettre la batterie en. Appuyez sur le bouton d'alimentation. Maintenant l'écran de chargeur de démarrage est apparu, et est il dire usb sur le bas de l'écran. Dans l'affirmative, maintenant vous pouvez clignoter le rom
Russ
Related
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
apog971 said:
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
Click to expand...
Click to collapse
It`s not corrupt and if you`re able to get into bootloader just flash the original ROM. Btw, did you unlock your phone with Olipro`s unlocker before trying all this?
apog971 said:
SALUT
JE SUIS FRANCAIS
SUITE AU TELECHARGEMENT SUR LE FORUM DE LA ROM FR 2.21 wm6 MON ATHENA RESTE BLOQUE EN BOOTLOADER
EN FAIT J'AI TELECHARGE LA ROM PLUSIEURS FOIS MAIS IL SEMBLERAIS QUE LE FICHIER EST CORROMPU
COMMENT PUIS JE TROUVER CETTE ROM NON CORROMU.
c'est tres tres tres important
merci
i'm french
i download a french rom wm6 versions 2.21 but my athena is bloqued in bootloader screen because the rom in download in the forum is corrupt
people have this rom but not corrup? thanks for a link
it's very very important
thanks thanks thanks for a reply
Click to expand...
Click to collapse
dp a hard reset by:
Pressing the volume button downwords and at the same time press the reset button at the back of the phone it will bring you to the hard reset process to restore the rom try this maybe it ill help !!!!
I think the moron hasn't bothered using the unlocker and so the bootloader rejected the NBH, and he needs to do set 14 0 and set 16 0 from mtty
I have the same problem and yes i admitt i didn´t use the unlocker. Now im going for hardreset, and it says to me press the action key. Which one is it? i keep pressing all buttons and nothing happens. even if i press the cammera. Plz help guys.
Ok i managed to go in hard reset. The problem is even if i press action and then press boot. All i get is flashing green light. Plz help. i also can go in bootloader moder. So i could use a differnt rom. I have tmobile ameo. Perhaps the original rom is up here somethere so my machine wont recect it.
If you have t-mobile ameo use the t-mobile 005 ROM it will get you working again - then use Olipro's amazing unlocker!
ok thank you can you supply with a link plz i don´t know where to find it. Thank you.
Hello everybody !
I have done a very very big mistake !!!
I flashed my hd2 with that wonderful ROM core cell v4.1. Everythings were OK....
I just change the language into french. The mobile has to restart and then it doesn't boot...
That's my fault because i didn't check my radio before and i think that my radio wasn't enough recent...
And now it doen't boot ! It stay at the firt page "cell series get you connected"
Can you help me PLEASE ???
Mickael
salut,
as tu essaye de flasher ta radio en mettant ton hd2 en mode bootloader? (demarrer en laissont le bouton volume bas appuyé)
Oui j'ai essayé en formatant ma micro sd en 32 bits et en prenant une rom renommé leoimg.nbh --> rien ne se passe
Apres j'ai juste mis sur la sd une radio 2.0.8 je crois et toujours pareil...
J'ai suivi quelques forums mais ca n'a rien changé, je reste bloqué sur la premiere page de presentation...
Merci pour ton aide.
kael61 said:
Hello everybody !
I have done a very very big mistake !!!
I flashed my hd2 with that wonderful ROM core cell v4.1. Everythings were OK....
I just change the language into french. The mobile has to restart and then it doesn't boot...
That's my fault because i didn't check my radio before and i think that my radio wasn't enough recent...
And now it doen't boot ! It stay at the firt page "cell series get you connected"
Can you help me PLEASE ???
Mickael
Click to expand...
Click to collapse
Switch phone off, then hold volume down button in and switch on (will boot into multi coloured screen), connect to pc and when "usb" shows on screen then flash the correct radio. There is no need for the device to boot up first for this to work.
When i hold volume down button and switch on i don't have multi colored screen i just have the firt page before booting :
HTC
smart mobility
CELL series
Get you connected
Are you sure you are holding the Volume down button in and keeping it pressed down while switching the phone on? Unless your volume button is not working it should boot into the bootloader (multi coloured) screen.
pull off the sd card before hold volume down and start the phone
Hello, here I have a motorola atrix in gingerbread 2.3.4 Roote with peter's Root Tools.
I found it very slow since few months and I decided to make a factory reset. For this I go in confidentiality - "restore the factory setting". The phone restarts and display "failed to boot 2. Boot is rsd mode".
I removed the battery and resart the phone, he start normally, like before.
I have then turn off the phone, then i start the phone pressing volume - and power, I go in "android recovery", but the same message appeared.
I removed the battery and I restart the phone, the phone start lke before, usually.
So I want to know how to restore my phone to factory settings and erasing all data.
thank you for your help, and soory for the spelling mistakes, because i'm french.
french version
bonjour, voilà j'ai un motorola atrix sous gingerbread 2.3.4, rooté avec peter's Root Tools.
Je le trouvais très lent depuis quelques mois et j'ai décidé de le remettre au valeur d'usine. Pour cela j'ai été dans confidentialité - restauration au valeur d'usine. Le téléphone a rédémarré et à afficher "failed to boot 2. boot on rsd mode".
J'ai enlevé puis remis la batterie et le téléphone s'est allumé normalement quand avant.
Je l'ait alors éteint puis rallumé en appuyant sur volume- et power, j'ai été dans "android recovery", mais le meme message s'est affiché.
J'ai enlevé la batterie puis je l'ait remis, le téléphone s'est correctement allumé comme d'habitude.
Je cherche donc à savoir comment faire pour remettre mon téléphone aux valeurs d'usine et en effacant toutes les données.
Looks like you have a damaged recovery. You cannot do a factory reset "the normal way" without a working recovery.
Since you're rooted, you could try the following procedure from your computer. Untested but should work.
You only type the stuff in bold. Make sure you type the commands exactly as shown.
Code:
[color=grey]>[/color] [b]adb shell[/b]
[color=grey]$[/color] [b]su[/b]
[color=grey]#[/color] [b]toolbox stop[/b]
[color=grey]#[/color] [b]rm -rf /data/*[/b]
[color=grey]#[/color] [b]rm -rf /cache/*[/b]
[color=grey]#[/color] [b]toolbox reboot[/b]
can you explan please ?
Where i do write this code ?
On my computer with the atrix on usb ?
thanks
Command line on your computer, with the Atrix connected via USB.
You need the Android SDK installed (for adb) as well as working drivers for the Atrix (available from the Moto website).
what the utilities of the software android sdk ?
I unrooted my phone since the last message, i must root the atrix before make this operation ?
This is getting too complicated. Since you want to do a factory reset and your phone switches to RSD mode anyway, you should just use RSDlite and flash a stock SBF.
You still need working Atrix drivers though.
what rsd lite ?
How flash a stock sbf ? What is this ?
The bootloader of my atrix is lock. this is a problem no ? I must unlock the bootloader ?
You don't need an unlocked bootloader.
For more information about RSD and SBF please see other threads, this has been discussed countless times. Or simply search on Google.
Hello
sorry for my english translated with google translate
as indicated in the title my Mi A2 is blocked.
Being impatient I wanted to install android P so in the parameters developer I activate the debug usb and unlock OEM and then I install a rom android P.
until the no problem android P works I just had a message at the start of the Mi A2 that told me beware the phone is unlocked with the obligation to click the power button to launch android yet in the settings developer OEM was well locked.
So I went through FASTBOOT to lock it with the command
fastboot oem lock
and the drama the phone reboot without stopping on the logo android one then on the message
YOUR DEVICE IS CORRUPT. IT CAN NOT BE TRUSTED AND WILL NOT BOOT
and I can not do anything anymore I can not do anything anymore
I can go to the fastboot mode with the volume key - and the power key, but I do not have any command because oem is locked so I can not write anything
I can not go on the recovery mode with the volume + and power buttons it reboot on the message
YOUR DEVICE IS CORRUPT. IT CAN NOT BE TRUSTED AND WILL NOT BOOT
i really do not know what to do it's been 3 days that i can tear off my head can you help me please
Bonjour
désolé pour mon anglais
comme indiqué dans le titre mon Mi A2 est bloqué.
Etant impatient j'ai voulu installer android P donc dans les parametres devellopeur j'ai activer le debeug usb et deverouiller OEM et ensuite j'ai installer une rom android P.
jusque la pas de problème android P fonctionne j'avais juste un message au demarrage du Mi A2 qui me disait attention le telephone est deverouiller avec l'obligation de clic sur le bouton power pour lancer android pourtant dans les parametres devellopeur OEM etait bien verouillé.
Je suis donc passé par FASTBOOT pour le verouiller avec la commande
fastboot oem lock
et la le drame le telephone reboot sans arret sur le logo android one puis sur le message
YOUR DEVICE IS CORRUPT . IT CAN'T BE TRUSTED AND WILL NOT BOOT
et je peux plus rien en faire enfin je ne sais plus rien faire
je peux aller sur le mode fastboot avec les touche volume - et la touche power mais je aucune commande ne fonctionne car oem est verouillédonc impossible d'ecrire quoi que ce soit
je ne peux pas aller sur le mode recovery avec les touche volume + et power il reboot sur le message
YOUR DEVICE IS CORRUPT . IT CAN'T BE TRUSTED AND WILL NOT BOOT
je ne sais vraiment pas quoi faire ca fait 3 jour que je m'arrache la tete pouvez vous m'aider svp
Hi , maybe this can help you ...
https://in.c.mi.com/thread-419111-1-0.html
good evening I have an x96q box stuck on the x96q boot logo when I put it the firmware by sd card the green bar progresses by a quarter and does not move the box flashes blue. can you help me.
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
guisel2003 said:
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
Click to expand...
Click to collapse
Bonsoir and welcome to XDA,
English is the preferred language in the forums, you can use google translate.
Hello all i also have but bricked X96Q . when i plug my box in PC with 100% good USB cable (it was working with another box in past) and drivers are installed, i try it in Win7 and also Win10 , i always get some results and it is: Sound i turn device in PC and it is detected and in 2sec another sound device is disconnected.
SW used is: LiveSuitPack1.11
Please help.
guisel2003 said:
good evening I have an x96q box stuck on the x96q boot logo when I put it the firmware by sd card the green bar progresses by a quarter and does not move the box flashes blue. can you help me.
bonsoir j ai un boitier x96q bloqué sur le logo démarrage x96q lorsque je le lui mets le firmware par carte sd la barre verte progresse d un quart et ne bouge plus le boitier clignote en bleu.pouvez vous m aider .Merci
Click to expand...
Click to collapse
You have had to wait longer time until the green bar has moved until the end. it takes about 10 minutes. If you stop before, I guess the box is bricked.
sakalsk said:
Hello all i also have but bricked X96Q . when i plug my box in PC with 100% good USB cable (it was working with another box in past) and drivers are installed, i try it in Win7 and also Win10 , i always get some results and it is: Sound i turn device in PC and it is detected and in 2sec another sound device is disconnected.
SW used is: LiveSuitPack1.11
Please help.
Click to expand...
Click to collapse
Which firmware did you have installed?