When i talk, to every ten of fifteen seconds talk is interrupted but not completely, i dont hear a person i speak with, or she dont hears me, then the conversation continues, but after a few seconds that happening again, the same way each time i establish a connection or me a call, it is happening for the past 3 weeks. Does anyone know what the problem is?
My phone is HD2 WWE Rom 6.5 1.66.479 manila 2.5.1921 radio 2.07.51 and CHT 1.8.5
Is it posible that i am only who have this problem???
i am despered
Related
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
mitcheloc said:
Okay, so I've never posted here before.. I've only lurked enough to figure out how to install a WM6 ROM on my phone.
I've been having a lot of problems with my Hermes lately (can't make/receive calls, sim missing, text messages not sending or receiving)... I have not figured out if it's from dropping it too much or if it's because I'd been running a WM6 rom on it. So I decided on Saturday to switch to another version of the WM6 ROM's available around here...
I installed 3DES.3 and so far I've been having more and more issues as far as making and receiving phone calls.
So the issue is that with the slider closed I'd go to the phone screen and then t9 in a user's name and then call them. The call would not connect... I kept trying and normally wouldn't notice the number it's trying to dial, but the phone is trying to dial a 107140 in front of every call made through the t9 dial menu.
Is anyone else experiencing this? Is the ROM trying to make long distance calls on our behalf? Should it be taken off the website?
Thanks guys,
Mitchel
Click to expand...
Click to collapse
the ROM you are talking about isnt exploited to my knowledge... but it is old and i think 3DES has stopped supporting it...
you are also in the wrong Forum... you should have posted in Hermes Windows Mobile 6... download this ROM and try it...
Thanks for the fast reply. I'll switch over to that ROM. Something is definitely up with this ROM though.
Thanks again,
Mitchel
I know this is a little Bizzare, I actually do want to use the phone on my device, but for some reason, I am not getting all of my incomming calls.
I can make new calls (outgoing) no problem, but incomming calls go to Voicemail after 4 rings. The device doesnt even wake up, or illuminate to say there is a call.
Call log showed no calls, while my Wife's wizard showed she had called me 16 (yeah, she tried a LOT) times.
Is this a known issue with the Faria Rom?
IPL/SPL 2.25.0001
OS 2.18.0.0
Service is Cinguler (oops i mean AT&T)
have you upgraded to a custom rom lately? since most of the wm6 roms people highly recommend using the t-mobile uk radio rom 2.19.
mdajunkie is correct. Radio 2.19.11 should solve your problem.
During the past several months I've tried several WM6 ROMs - mostly PDAViet's. Currently I have the following:
ROM version: 7.7.7.7 WWE
ROM Date: 9/08/07
Radio version: 1_02.20.21
Protocol Version 4.1.13.9
ExtROM version: Mystrerious 1.0
The device is Imate's Jamin (Prophet G3). Since I started to use WM6, I am often having the problem when I cannot receive the incoming calls from time to time - my friends have to leave the voice messages in my mailbox even when my phone is on and the cell coverage is great. It seems that it is related to GPRS activity - I have GPRS/EDGE internet connection always on and I have my email synchronized with an Exchange server over the air. What is even worse, I have no way of knowing if someone has called me - even if they leave a voice message I am getting no notification on the PDA. I started to call my own cell number often trying to understand the pattern and I noticed that when I cannot get through, I can disable the GPRS and after that the call gets through.
I don't remember having such problems with original WM5 ROM when I purchased my Prophet, so I assume it is related to WM6.
As I said, I tried different ROMs and different RadioROMs (now I rolled back to the original RadioROM originally provided by Imate, since I saw no improvement with newer RadioROMs).
I have T-Mobile USA mobile service with Total Internet plan if it makes any difference...
The questions:
is anyone else experiencing problems like this? any workarounds?
is phone line is supposed to work simultaneously with GPRS? Could it be caused by a difference between [GPRS simply connected and no internet activity] and [GPRS connected and sending/receiving data]?
could it be related to the settings of activesync (how often it syncs with Exchange or be continuously connected)?
Any help is greatly appreciated...
Incase there is any data transfer happening at the time of the call coming in (pls note even while polling there is some data being transfered) the call will not go thru.
I have been using WM6 roms for the past six months... from my signature you can see how many i have treid, in each of the roms.. I also use push mail, hence I am always connected thru edge....I get phone calls even when connected to GPRS.. however if there is any data transfer happening at that point in time the call goes into my voice mail.
i think it is problem of your service provider,try another radio rom?
I am having the same problem, any solutions?
It happens to my device roughly once a month, and my GPRS is always off. So IMHO it is related to WM6. It did not happened on WM5.
My gprs (edge) connection is always on and I have the same problems on the radio rom 2.41.21. Try to use the radio 2.61.21 - no problems with incoming calls...
Korand, thanks for the suggestion. I actually tried 2.61.21 a couple of months ago - it didn't fix this problem
For now, I've changed my Activesync settings so that it will sync data via GPRS every 30 mins (before it was "stay connected all the time") - hopefully it will decrease the probability of getting the incoming call at the time of data transfer.
zeroed said:
i think it is problem of your service provider,try another radio rom?
Click to expand...
Click to collapse
lol... this is no problem.. this is wht is supposd to happen on GSm.. because it works on a single FM frequency n not a band like CDMA or TDMA.. this is normal.. its jus like whne ur using ur dialup internet n ur phone line gets busy.. soo no solution unless u switch to TDMA
hahahha,you don't know what are you talking about,what FM frequency,this is not Benefon Delta lol
zeroed said:
hahahha,you don't know what are you talking about,what FM frequency,this is not Benefon Delta lol
Click to expand...
Click to collapse
ok.. then can u tell me the kind of modulation is used in GSM.. go wikipedia ur ass n u will see wht im talkin.. ur such a n00b
it is Gaussian minimum shift keying (GMSK).. jus a modified version of FM to use support multiple communications on a single frequency.. talk to me when u got ur engineering degree..
No calls reception - no calls outgoing
I have a TYTNII who suddently has the same problem of incoming calls directly to mailbox, for each calls, and also I can't call anymore.
Does anyone solve this problem?
With the Sim card in my Qtek 8300 WM5 I don't have the problem.
HTC support say they don't know this problem and ask to make a hard reset...
ROM 1.56.406.5 (30/8/2007)
Radio 1.27.12.32
lmdafred said:
I have a TYTNII who suddently has the same problem of incoming calls directly to mailbox, for each calls, and also I can't call anymore.
Does anyone solve this problem?
With the Sim card in my Qtek 8300 WM5 I don't have the problem.
HTC support say they don't know this problem and ask to make a hard reset...
ROM 1.56.406.5 (30/8/2007)
Radio 1.27.12.32
Click to expand...
Click to collapse
seems then its a common problem since tytnII has it may be there is something written in registry to divert call to voicemail while data traffic is going ON to avoid bad colliding accidents of voice and data packets on the same highway
to avoid dirty signals..thats all..
btw,all i know is that GPRS+receive calls = bandwidth bottleneck...see? how "cheap" the GSM is
so,the solution is to disable one of them...
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
marinic said:
I am experiencing this problem in all versions of ROMs tested so far. Even in the original ATOM WM5 ROM.
The problem is when I call somebody, who is already in another conversation and have his call waiting feature enabled, I can't sense it from my mobile. I don't get any ringing tones either. It just remain silent and keep showing in the display "Dialing...". Just seems like its searching hard for the network...
I think other ATOM users are also facing the same problem. Have anyone sense it? Any solution on this problem?
BR/ Marinic.
Click to expand...
Click to collapse
I think it is normal if you are calling someone with the call waiting feature enabled, we won't hear anything either engaged tone or ringing tone as our calls in waiting/queue mode. Only he/she will hear the beep sound stating that someone is calling.
Me too,
I'm come from Bangkok, Thailand and All Rom i ever install is at the same problem (WM5 Original, WM5 O2asia, WM6 Charteux last edition, WM6 Charteux current edition)
Problem is sometime calling, It just no any sound at all and keep showing "Dialing" and may be nothing happen (may be freeze or long wait) when press end key on screen or hangup button. But i don't sure about the reach is busy or cann't connect (Used to ask my friend that his call is busy when i'm calling, he told not) Sometime cann't reach the network, it could happen again, It's seem better when use WM6 (Can ending, not wait for long time)
Is it may be radio ROM?? Or Bug??
Thanks marinic to bringing the issue up.
All my friends using ATOM and me too is facing the problem from the very first ROM to till today the latest ROM of Jiggs.
All other devices show status Waiting while ATOM show status Dialing.
Is this a problem of DialPad or anything else.
Does anyone have any solution. Please inform....
Thanks guys for your responses.
For clarification to powerwoot, my experience so far with call waiting from other handsets like Nokia, Motorola, Sony-Ericsson is the display shows a message "Call Waiting..." and then ringing tone is played. So I come to know that other party is busy with some other conversation.
Hope I make you all understand the problem. For your information this feature worked perfectly in O2 XDA II mini with the official ROM.
Regards,
Marinic.
Bosses...
Why silent? is it very much tough for you guys? Can anybody explain the problem technically in more details??
Best regards.
yes
you are right i have the same problem
is there any way to have the user notified of the status of the party that you are calling?
ie/ if i make a call, and it will display "call waiting..." when i'm trying to reach someone on the other end...
I have a WM6 device. Thanks
This may help...
Hi,
Go to Start>Settings>Phone in Services tab set the settings for Call Waiting to Notify me.
I am not sure, but it may help cause I get status Busy... now at least.
its problem with all windows mobile....
Hello, I Have Just Upgrade My Rom to windows mobile 6.1 b199 from windows mobile 5 , thanks to helloworld,, but i have got a big problem, my 6828 always freeze when i make a call or receive a call,, the speaker jammed and the call ended. If that happen, i have to end the call and the phone data connection will be closed and the phone will find the network again,,it always happen if i make or receive a call longer than 30 seconds ,, help me , i can make a call anymore,, is there any solution ?? i have done a hard reset many times, but it didn't work ,,thank you
I hv the same problem with my MWG Atom Life White Limited Edition, using PDAVIET ROM WM6.1 Manilla 2D (Core 20764), already use 20924 & 20755 before...both of them always have the same problem..
If i make a call, after talking a few seconds, my phone 'hang' for a minute...
If i receive a call, my phone 'hang' for a minute...
sorry for my bad english...
any solution from Expert here Please...?
Thanks before
Somebody please help...
dody_software said:
Hello, I Have Just Upgrade My Rom to windows mobile 6.1 b199 from windows mobile 5 , thanks to helloworld,, but i have got a big problem, my 6828 always freeze when i make a call or receive a call,, the speaker jammed and the call ended. If that happen, i have to end the call and the phone data connection will be closed and the phone will find the network again,,it always happen if i make or receive a call longer than 30 seconds ,, help me , i can make a call anymore,, is there any solution ?? i have done a hard reset many times, but it didn't work ,,thank you
Click to expand...
Click to collapse
Hi dody_software,
When my radio driver 0.33, I ever encounter this problem, not only it, my data connection always bad, and need to reset to establish it. So I upgrade the radio driver to 0.34, and after that no one of that problem happened again. I suggest you to upgrade your radio driver to 0.34.
I'm having same problem. It seems the phone or maybe network problem.
Try manualy switch to 3G only on: Setting -> Phone -> Network -> Network Selection.
But in some places, I can leave it "Auto" coz I can call or receive with 3G or GSM without any problem.
Hope this could help.
Maybe somebody else could give us a better explanation.
Hi guys. I've same problem. Where can i download radio driver 0.34 and how to upgrade?