New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
Hi all
I seem to have a problem with my unlocked m3100
A friend ran VT_Engine_23818_ext.CAB on my 3100 and now I can't seem to download my e-mail. . .
See attached
It’s showing a "U" by the phone connection - not G, or 3G as precious
Would like to back it out / uninstall, by it doesn't give me the option
Any help / advice / commiserations gladly accepted
Paddy
Have you tried editing the registry?
franjoe1985 said:
Have you tried editing the registry?
Click to expand...
Click to collapse
Alas, tried that, but I think it has messed around with more than the registry
& begining to wonder if a full reset might not be the best solution
if at all
Isn't it listed in Add/Remove as an "Customisation Tool" or something like that?
As many S/W co. required to license it's product to their user, many required you to have the Device ID to install. I know one of them is Mapping / GPS S/W; Destinator.
Other devices, this no. is included / reported under Device Information (Start > System > Device Information), but unique to this mdl. it is not listed (other HTC made products have it), so the Question is how do you find it?
I called the HTC Support (outsourced to India / Pakistan I think, all of my 3 calls answered by their accented tech supports), low level tech know nothing, even they don't know if such exist. After this call, I kept searching and accidentally stumble to Windows Update Icon in Settings and attempted to do the update. Unexpectedly, the update was completed w/o any, my system is up-to-date, I supposed, and in the log report through this process, there it is ... the Device ID no. is revealed.
I called HTC support again, and discuss this particular subject, as I expected, this 2nd low level tech support do not know anything too, just as the first. So, I asked to be connected to the supervisory tech support and was promised that he would call me back.
The supervisor tech support called approx. 45 min. later. Yes, as I expected, he insisted that no such thing in this device known as the Device ID, though I mentioned to every one (all 3 of them), that, such, existed in my other 10+ previous devices I owned and majority of them are made by HTC.
And, obviously we debated and they feel strongly that they know better ... hallooo ... they may do on other subject, but on this particular one ... ??? ??? ???
My point is: I sincerely hope that their (HTC team that developed the x7501) to include this information in their future update (either through ROM or Device Info) so we can use S/W that requires it.
Hallooo ... ooo ... HTC ... ... ...
So, for you that need this info, here is how:
Start > Settings > System > Windows Update ... and view / read the log after finish, in it you will find your unique Device ID and IMEI no. as well (the IMEI no. is also available through Device Information)
Device ID on Advantage x7501 / Athena
Forgot to mention:
You need to be connected to the Internet to get the update and produce the log!
Sorry guys n gals ...
Thanks, I haven't needed that info yet, but nice to know where I can get it.
Device ID
hi everybody,
i just want 2 know how can i find my ( Device ID ) for my Htc Hero.
thnx alot.
joker5089 said:
hi everybody,
i just want 2 know how can i find my ( Device ID ) for my Htc Hero.
thnx alot.
Click to expand...
Click to collapse
searching for your answer here would be agood start
http://forum.xda-developers.com/forumdisplay.php?f=511
Devise id
Thanks for the info
But i have a htc touch 2
And it does not have an windows update in the settings, so any help for my problem?
As im trying to install tom-tom and activate maps and download maps and it is asking for my devise id
and it gives me an example : A1B2.....
hkusuma said:
So, for you that need this info, here is how:
Start > Settings > System > Windows Update ... and view / read the log after finish, in it you will find your unique Device ID and IMEI no. as well (the IMEI no. is also available through Device Information)
Click to expand...
Click to collapse
And if you do not have Windows Update on your device like on mine, using the Athena_SPL1.2_WM6.1_B20931_WWE_R6.1-MiChY
Hello all, I wanna know if there is a cmd application for WM 6.5 or not ??
Whta do you mean by "cmd" application? Like an imitation of the Windows [Desktop] Command Line? If so, I don't really know if there are any of thoes out there. However there is CeleCMD which is relatively close to the basics of the Command Line. Look it up. The page is in Chinese/Japance (I can't tell as I don't speak or read either language), so you can use Google to translate it if you need to
Hey All!
I have been looking around but found nothing related to this phone so here is all the Info i could gather:
Operating System Windows mobile 6.1
CPU type Hislicon-K3,460MHz
Written on the back of the phone:
TYPE: 19000
S/N: xI900020091200001
Channel: GXM850/900/1800/1900
IMEI: 355xxxxxxxx3570
And just a quality test passed sticker.
(If there is any software that gives more information about it by connecting to the phone please let me know and I'l provide that Info also!)
Phone Image (kindly stole from a chinese forum because I have no camera here):
Code:
h**p://img697.imageshack.us/img697/7193/dsc01324ko.jpg
Two days ago my contacts, tasks and last calls became inaccessibly (they are there because I backup them with 3rd party software), messages appear ok but instead of names just show the cellphone numbers.
I have been trying to fix that but it seems that I can't find a way to "chkdsk" the cellphone internal memory.
Also I wonder if its possible to upgrade/mod it (I would love to somehow install linux on it ehe), I'm a programmer but for enterprise management software so I have no idea how to do anything related with this "kind of stuff".
Thanks, Best Regards,
Mywk