I have found a cheap and usable solution for a felt backing to my tablet. 99 cents:
http://www.dickblick.com/products/quick-stick-felt/
I found this at my local Michaels Arts and Crafts Store -- cut it a little smaller to size and then paste it to the back of the device. You might want to jot down the serial number first, in case you misplace the box.
I no longer have concerns about moving it on my desk and scuffing up the back.
Reposting this from the giant thread:
For anyone wanting a back protector, I cut up some carbon fiber vinyl that I bought a while back from ebay. I lay it on flat surfaces a lot and didn't want scratches. Search carbon fiber vinyl on ebay.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I traced around the tablet on the vinyl backing. Then i cut the overall size down another 1/8" or so all the way around. Then line the vinyl up and start working from one side to the other. I only removed enough of the backing to get it started, then worked it on from there. Doing it this way you can work out any bubbles as you go, which works great.
rothnic said:
Reposting this from the giant thread:
For anyone wanting a back protector, I cut up some carbon fiber vinyl that I bought a while back from ebay. I lay it on flat surfaces a lot and didn't want scratches. This is the same stuff: http://cgi.ebay.com/ebaymotors/BL-D...Q5fTruckQ5fPartsQ5fAccessories#ht_2261wt_1165
I traced around the tablet on the vinyl backing. Then i cut the overall size down another 1/8" or so all the way around. Then line the vinyl up and start working from one side to the other. I only removed enough of the backing to get it started, then worked it on from there. Doing it this way you can work out any bubbles as you go, which works great.
Click to expand...
Click to collapse
I am going to do this to every device from now on till the day I die.
slick AND protective. that is how it's done fine sir.
rothnic said:
Reposting this from the giant thread:
For anyone wanting a back protector, I cut up some carbon fiber vinyl that I bought a while back from ebay. I lay it on flat surfaces a lot and didn't want scratches. This is the same stuff: http://cgi.ebay.com/ebaymotors/BL-D...Q5fTruckQ5fPartsQ5fAccessories#ht_2261wt_1165
[PICTURE REMOVED]
I traced around the tablet on the vinyl backing. Then i cut the overall size down another 1/8" or so all the way around. Then line the vinyl up and start working from one side to the other. I only removed enough of the backing to get it started, then worked it on from there. Doing it this way you can work out any bubbles as you go, which works great.
Click to expand...
Click to collapse
Just ordered 10sq. ft. of this 2"x5" for $23.79 with $10 rebate for signing up for 'Bill me Later' so <$14.00 for the total...
MOD EDIT: Ebay Links
rothnic said:
Reposting this from the giant thread:
For anyone wanting a back protector, I cut up some carbon fiber vinyl that I bought a while back from ebay. I lay it on flat surfaces a lot and didn't want scratches. This is the same stuff:
I traced around the tablet on the vinyl backing. Then i cut the overall size down another 1/8" or so all the way around. Then line the vinyl up and start working from one side to the other. I only removed enough of the backing to get it started, then worked it on from there. Doing it this way you can work out any bubbles as you go, which works great.
Click to expand...
Click to collapse
Any chance you've got any left over that you'd want to sell? I would love to do this but don't need 4 feet of it or really want to pay $25 if possible.
jtbnet said:
Just ordered 10sq. ft. of this 2"x5" for $23.79 with $10 rebate for signing up for 'Bill me Later' so <$14.00 for the total...
MOD EDIT: Ebay Links
Click to expand...
Click to collapse
How's about i buy a piece of that, just the size of the gtab, from you?
eluminx said:
How's about i buy a piece of that, just the size of the gtab, from you?
Click to expand...
Click to collapse
I would be willing to do that too if possible.
DraglineDrummer said:
I would be willing to do that too if possible.
Click to expand...
Click to collapse
Sounds good.
PM when you decide.
When I get a chance, I'll scan the backing of my vinyl that I applied. It is pretty close to perfect size, so you have to be exact when puting in on.
So, we putting together a group buy of this stuff or are we just gonna push rothnic into mass production of the things (like he doesn't do enough already LOL)?
Seriously though, I want on the CF Vinyl bandwagon, however I don't see the need for me personally to have 10 square feet.
Looking forward to your pattern, rothnic.
I used the link in Rothnic's post to order mine. $9.99 shipped was the price. It is really easy to apply, and surprisingly it laid down smooth on the curved edges. It is very tough, and looks cool. I did similar to Rothnic by just laying the tablet face down on the vinyl and tracing. Then I cut it about an 1/8th inch smaller. Fit great, and even let me peel it back up a couple times to get it right..
I really like it. Thanks again Rothnic.
I followed Rothnic's links to ebay and bough some 3M carbon vinyl film and I have to say, it ROCKS! I bought it from a different vendor for the same price, the vinyl itself is very heavy duty and easy to work with when applying. If you have ever fought with vinyl before (and maybe lost) this is a much better class of product than the old stuff. I'll put a quick tutorial on how I did it here just to show how easy it is since this is a DIY post after I get to 8 posts.
After reading Rothnic's original post I got excited and called all the sign shops in town looking for carbon fiber vinyl film. Much to my disappointment no one had it. One sign shop an hour away had it, but wanted $30 for a 12 inch x 12 inch piece of it. Who knows, maybe it was real carbon fiber but I said "screw that" and just ordered a 12 inch by 48 inch piece off ebay for 9.99 including shipping. In the meantime I went to a sign shop close to where I work and bought a small piece of vinyl just to practice on. Gray and sparkly was as close to carbon fiber as I could get and it turned out okish to use temporarily. The new vinyl however was easier to apply and looked better to boot.
Thanks again Rothnic!
Carbon Fiber vinyl
I got my sheet finally and cut out a form for my Gtab. I even opened up a serial number window too before installation. Now I have enough material to make about 5 more now that I have a template, guess I have to find 5 Gtabs at clearance.
TeamSpeed said:
I got my sheet finally and cut out a form for my Gtab. I even opened up a serial number window too before installation. Now I have enough material to make about 5 more now that I have a template, guess I have to find 5 Gtabs at clearance.
Click to expand...
Click to collapse
Very nice work! I am jealous. I don't have the time to make one of these right now. I will have to wait til next year sometime to do it.
TeamSpeed said:
I got my sheet finally and cut out a form for my Gtab. I even opened up a serial number window too before installation. Now I have enough material to make about 5 more now that I have a template, guess I have to find 5 Gtabs at clearance.
Click to expand...
Click to collapse
What sleeve is that? Looks pretty slick.
TeamSpeed said:
I got my sheet finally and cut out a form for my Gtab. I even opened up a serial number window too before installation. Now I have enough material to make about 5 more now that I have a template, guess I have to find 5 Gtabs at clearance.
Click to expand...
Click to collapse
If you're interested in selling one you've made I'm your template, PM me.
shibbybypass said:
Very nice work! I am jealous. I don't have the time to make one of these right now. I will have to wait til next year sometime to do it.
Click to expand...
Click to collapse
Not to argue with you, but it really takes about 10 minutes total. Very easy, and highly recommended.
rothnic said:
Not to argue with you, but it really takes about 10 minutes total. Very easy, and highly recommended.
Click to expand...
Click to collapse
I would but I don't have time for the order at the moment. I will be leaving for boot camp on Tuesday so I am very short on time. I hope when I am able to get online again I will find all kinds of new things that have been discovered for the G Tablet.
shibbybypass said:
I would but I don't have time for the order at the moment. I will be leaving for boot camp on Tuesday so I am very short on time. I hope when I am able to get online again I will find all kinds of new things that have been discovered for the G Tablet.
Click to expand...
Click to collapse
Thanks for your service! Good Luck!
Just wanted to show off!
[/IMG]
Related
Its a nice low profile folder style case, priced reasonably at $17 shipped.
Only problem is apparently there is no side tabs (two bottom ones and one at top),
For some reason (unlike the rest of the stuff) its not listed on witglobal web store.
Find the ebay listings here.
Update: they have listed it on their webstore as well (for $16 shipped).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update : they have also added a tab-less version (with 4 straps) for $17
Update : they have also 3 official Malata cases v2 (doesn't block the USB port) for $16 shipped.
Looks really nice and slim. But I don't understand what prevents the GTab from sliding out the side of the folio case. With tabs only on the top and bottom, it seems like the GTab can slip out sideways by accident.
Looks like someone bought it. If the buyer is on this forum, hopefully they'll come back here to post a review.
Just sent a couple of questions to the seller about that, hopefully I'll have a positive response. If nothing else, you could always get some foam or rubber to put on the tabs themselves, I would imagine that would keep it nice and snug in there, and protect the tablet from any scratches.
I would expect it to be a tight fit and friction would hold it in.
There are 10 cases sold so far (7 from the expired US listing and 3 from the current listing).
Lets hope any of these makes its way on of the members here.
Looks too unstable for me. I would be crying if it slipped out and hit some concrete.
Hello. Iave order one of these case but still haven't receive it. I will let you know if its ok
Sent from my HTC Desire using XDA App
Stability of the Case
I would agree about the possibility of gtab sliding out of this case. I have one of their USB cases with clips on the left side as well as on the top and bottom and occassionally, the gtab will slip out the right side if I put it in my backpack the wrong direction. I would much rather see the unit slide in from the top down so that the case clasp would hold it in and have clips on the other three sides (left, right and bottom). I would think that a little velcro might be a good idea. I have the soft side of two long velcro strips on the back and it slides in and out ok. Not sure what would happen with the thickness of the assembly with the clips and velcro. It might be too large. I use the velcro when I use the gtab on my treadmill. Holds it from excess vibration from running.
As far as Witglobal goes, ordering process went smooth, took about three weeks total time to receive the case from them.
wtang said:
Looks really nice and slim. But I don't understand what prevents the GTab from sliding out the side of the folio case. With tabs only on the top and bottom, it seems like the GTab can slip out sideways by accident.
Looks like someone bought it. If the buyer is on this forum, hopefully they'll come back here to post a review.
Click to expand...
Click to collapse
Velcro is your friend.
nearxos said:
Hello. Iave order one of these case but still haven't receive it. I will let you know if its ok
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks for letting us know. I figured someone here would buy one of these cases! Anyway, I'd love to hear how the case works out after you receive it. Some photos of your GTab in the case would also be nice!
Just Ordered One
I just ordered one. I'll let you know how it goes when I get it. I already got the case with keyboard from the same company. It took 3-4 weeks for it to come in, so don't be in a rush if you decide to order something from them.
As for this case not having tabs on the side, if the tab does seem to slide a bit I may glue a rubber mat/mesh to the back of the case, the same stuff used in tool boxes, drawers, etc. I would assume between the mesh and the friction of the tabs the tablet will stay in place.
How thick is the whole thing once the GTab is installed? Also, can the flap that covers the screen fold all the way back or does it only go a little over 90°? Very interested.
DrPaulR said:
How thick is the whole thing once the GTab is installed? Also, can the flap that covers the screen fold all the way back or does it only go a little over 90°? Very interested.
Click to expand...
Click to collapse
Looking at the pics, I would assume it would be like the case I already have. Yes, the cover will fold back on itself, but then the kickstand will not be able to fold out. Although it is possible to fold the cover back and open the kickstand on it.
Hope that answers your question.
Sorry fo the delay, I've been busy.
I'll let everyone know when it comes in.
James
Hi all sorry to kinda steal the thread but ...
Hope someone can help
Can anyone please confirm that the witglobal site is a real one and not a fake, it would be one thing to buy accessories for a couple of dollars, but another sending out 400$ for a tablet that would never show up
I've been searching the internet like crazy and yahoo answers says their fake (well someone does) and their company is registed at some room in an appartment building, so ...
Also i do live in western europe so if anyone has any knowledge for me that would be great.
thx in advance.
Why would you buy from them a $400 tablet ?!?
No more reliable alternatives ?
If its the g-tab you are looking for why not check at steve's store ($350 + shipping).
Any way, if you really must shop at witglobal for such high ticketed items, make sure you use paypal, if within 45 days you are not satisfied with your transaction paypal will get you your money back.
Hope that helps,
stjani74 said:
Hi all sorry to kinda steal the thread but ...
Hope someone can help
Can anyone please confirm that the witglobal site is a real one and not a fake, it would be one thing to buy accessories for a couple of dollars, but another sending out 400$ for a tablet that would never show up
I've been searching the internet like crazy and yahoo answers says their fake (well someone does) and their company is registed at some room in an appartment building, so ...
Also i do live in western europe so if anyone has any knowledge for me that would be great.
thx in advance.
Click to expand...
Click to collapse
i receive my case an hour ago. and as i promise i took some photos.
i like the case although there isn't any protection for the sides of the tablet.
it holds the tablet tight enough i think.
P.S. i didnt order mine from Witglobal on ebay beacause he had only 1 feedbackand i found it from another seller
and i receive it in 9 days
nearxos said:
i receive my case an hour ago. and as i promise i took some photos.
i like the case although there isn't any protection for the sides of the tablet.
it holds the tablet tight enough i think.
P.S. i didnt order mine from Witglobal on ebay beacause he had only 1 feedbackand i found it from another seller
and i receive it in 9 days
Click to expand...
Click to collapse
Thanks for the images, how is the build quality ? does it look cheap as it cost
do you think it wont slide out of the case if the case is hold vertically (being put in or taken out of a bag or something) ?
Also it would be great if you can post a link to that second seller you found
TIA
aasoror said:
Thanks for the images, how is the build quality ? does it look cheap as it cost
do you think it wont slide out of the case if the case is hold vertically (being put in or taken out of a bag or something) ?
Also it would be great if you can post a link to that second seller you found
TIA
Click to expand...
Click to collapse
The build quality is good better from other cases I saw. The first thing I did was to hold the case vertically and shake it to see if it will slide out. its very tight. I will post the link tonight
Sent from my GTablet-TnT-Lite using Tapatalk
How do you insert the GTab into this case? Do you sort of snap it into the case from above, and the clips grab the tablet? Or do you sort of slide the tablet in from the side? If the clips are very tight, then I imagine sliding the tablet in from the side may scratch the edges of the tablet?
wtang said:
How do you insert the GTab into this case? Do you sort of snap it into the case from above, and the clips grab the tablet? Or do you sort of slide the tablet in from the side? If the clips are very tight, then I imagine sliding the tablet in from the side may scratch the edges of the tablet?
Click to expand...
Click to collapse
i snap it into the case from above. but it its possible also to to slide it from the side but i thing its easier to snap it.
the seller i bought from ebay is specnur34
Hi All,
I received both the CaseCrown Bold Standby Case & CaseCrown NetBook Case this week as was pretty impressed by both so I figured it was worth it's own thread. I'm also posting a bunch of pictures here in the OP so people can see what they look like in use.
CaseCrown Bold Standby Case
Amazon Link
The Bold is pretty much everything you would expect. The case is relatively rigid and the Transformer fits in it perfectly. Very clean, tight and professional. The tablet definitely feels protected. Although, obviously, like any case of this type you don't want to drop it as there is no real shock absorption.
The tablet slides in the bottom and then you tuck the flap in. The flap has a velcro connection on the inside so that it will not slip. There is no way this tablet would come out of the case accidentally except for intentional abuse.
The magnetic closure is good. You could argue that it "could" be a stronger magnet except I think it is perfectly fine. It will not come open accidentally under normal use.
The material is good although I'm not sure whether it is real leather or not. Doesn't really matter because I think it looks fine either way. Material looks professional. The only annoyance is that the shipper shipped my unit in just a bubble mailer so there are a couple "dents" on the front (see last pic). Hopefully these will go back to normal after some time.
The case basically has 4 orientations total: closed, book (cover folded flat back), vertical landscape and horizontal landscape (keyboard position). This isn't quite the level of "adjustability" you get with the multi-angle cases but I thought that was fine. Even when I was holding my tablet by itself, these were the main angles I used anyway. The main gap in the design is a lack of a 45 degree angle but I didn't need it and knew that when I purchased this. I also love that you can fold the cover flat back like a book for reading.
There are holes for all ports including the front and back camera as well as the light sensor and microSD. No issues here. The back camera hole doesn't appear to block the camera lens like some other cases I've seen. I actually would have preferred if the microSD was covered so that I couldn't accidentally eject it but I know most people prefer this to be open.
Overall, an excellent case. I highly recommend it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CaseCrown NetBook Case
Amazon Link
The NetBook Case is currently only $7 shipped and fulfilled by Amazon. Fortunately I still have my Prime membership so buying this was pretty much a no brainer. This case works EXCELLENTLY as your only case. It fits the tablet by itself to a T. It feels snug and protected in this case. The only downside is that the straps are made for a netbook so it isn't totally secure if you are holding the tablet in it with the case open. It works "okay" like this if you are just watching media though (I did it the other day). I don't have a dock but I'm pretty sure a dock will fit. There is a bit more room and this case is made for a netbook afterall.
The material on this case is very good and I really like the padding. It looks pretty professional although due to the size it could easily be mistaken for a "man bag".
The Transformer does fit in this case while it is ALSO in the Bold. However, it is a pretty tight fit and I worry that the edges of the Bold will curl from how tight it is. Due to this, I am strongly considering returning the NetBook case now that I have the Bold.
Overall, this is a great "everyday" carrying case. Only issues are that you could NOT fit the charger in there (I bought it knowing that and only use this for single day trips) and it will not properly accommodate the tablet if you have a case on it.
Nice - thanks for the long review.
I think I will wait for the TechTree review before I decide.
Goddam, why there is no Clip-in system cases yet? I'll never buy a case with such a bezel !
thanks bro for sharing i went and bought on since i cant find one in the wild... protecting my baby Transformer ..cant wait for it
I received my CaseCrown case yesterday. I am really impressed with the quality. It looks and feels very professional.
Some of the cases I have seen on ebay had uneven stitching. Maybe they were sown by hand. Here are a few shots I took to give you guys a closer look.
Let me know if you have any questions about the case. I have gotten so much from these forums; I want to give a little back.
Got mine last night. IN the "up to watch" mode its quite stable. IN the typing mode its a bit floppy and the bottom can come loose if you move it around a bit but given the cost it gets me what I want. I really just wanted the up to watch mode.
Excellent pics, really shows how good the case is with the flap folded all the way back, can't see any over hang. Looks less bulky but solid. Can't wait until they send mine but I am in Canada and we just had a postal strike.
How's the additional weight does this case add on?
ky3bmu4 said:
Goddam, why there is no Clip-in system cases yet? I'll never buy a case with such a bezel !
Click to expand...
Click to collapse
Yeah I would have loved something like the Otterbox that didn't cover as much of the bezel. Not too much of an issue though.
AstroTrain said:
Excellent pics, really shows how good the case is with the flap folded all the way back, can't see any over hang. Looks less bulky but solid. Can't wait until they send mine but I am in Canada and we just had a postal strike.
How's the additional weight does this case add on?
Click to expand...
Click to collapse
Hey my pic of it laying down is a little cut off. There IS overhang. About 1.3 cm.
It does add noticeable weight. Fortunately I have been holding it less now that I have the case.
EDIT: Adding picture
mquarles said:
I received my CaseCrown case yesterday. I am really impressed with the quality. It looks and feels very professional.
Some of the cases I have seen on ebay had uneven stitching. Maybe they were sown by hand. Here are a few shots I took to give you guys a closer look.
Let me know if you have any questions about the case. I have gotten so much from these forums; I want to give a little back.
View attachment 643067
Click to expand...
Click to collapse
Thanks for adding more pics to the thread. It looks like your camera hole is a little off. Put the tab in a little tighter. My camera works perfectly if you sit it right.
Thinking about buying this case.... its between this or a roocase. Any1 know which is better?
sanziosan said:
Thinking about buying this case.... its between this or a roocase. Any1 know which is better?
Click to expand...
Click to collapse
I don't think the rooCASE is out yet. rooCASE is known for good quality too though. It probably will boil down to preference over whether you want the single angle style or the multi angle style.
oh your right wont be in stock til next week... probably the same time i get my replacement transformer though... hmmm guess ill get this one i really like the design
sanziosan said:
Thinking about buying this case.... its between this or a roocase. Any1 know which is better?
Click to expand...
Click to collapse
After reading the first few reviews on the roocase, I'm leaning toward the case crown case...I preordered the roocase, but people say the camera does not line up perfectly with the holes. This is a big negative for me because I use my tablet to webcam with people.
xreflection said:
After reading the first few reviews on the roocase, I'm leaning toward the case crown case...I preordered the roocase, but people say the camera does not line up perfectly with the holes. This is a big negative for me because I use my tablet to webcam with people.
Click to expand...
Click to collapse
yea thats a big drawback for me since me n my gf like using the front camera for taking pictures of ourselves... casecrown it is.
sanziosan said:
yea thats a big drawback for me since me n my gf like using the front camera for taking pictures of ourselves... casecrown it is.
Click to expand...
Click to collapse
Yeah the CaseCrown works perfectly with both the front and back cameras. I have tested both.
Sent from my Transformer TF101 using Tapatalk
sanziosan said:
Thinking about buying this case.... its between this or a roocase. Any1 know which is better?
Click to expand...
Click to collapse
I don't have the CaseCrown but i do have the rooCase multiangle. Fit is fine, cutouts line up. The 5 or 6 extra dollars that the rooCase costs buys you the multiangle feature plus real leather. The downside is it probably weighs more than the CaseCrown.
Can the transformer be docked while in the StandBy Case?
Hessinger said:
Can the transformer be docked while in the StandBy Case?
Click to expand...
Click to collapse
I highly doubt it
Sent from my Transformer TF101 using Tapatalk
Saw the posted images. I would think if you release the velco it might dock with the keyboard dock with the case on. Getting my asus tf and case soon..so I'll see.
Hi,
I just got a gel case and set of 3 screen protectors off of Ebay:
http://www.ebay.com/itm/17068638073...X:IT&_trksid=p3984.m1439.l2649#ht_4357wt_1037
http://www.ebay.com/itm/18072112098...X:IT&_trksid=p3984.m1439.l2649#ht_4900wt_1037
I'm not associated with the seller, but thought that if anyone was interested:
- The gel case (I got the white one) fits pretty well. Snug, and all the holes in the right places (the power and volume+/- buttons are covered, but slightly raised).
- The protectors were actually not bad. I always hate putting these things on (bubbles, dust), but these were pretty heavy gauge plastic or whatever, so not bad for 3-4 USD (incl shipping).
- Shipping to East Coast U.S. took about 2 weeks (seller shipped next day, but then...).
Just an FYI.
My daughter, who also has an SGP5, bought locally, and paid almost $50 for case and protector (with "lifetime warranty"). She's still telling me she likes hers better, but for less than $10, I like mine ...
Jim
I bought from this seller too !
quality of case & Film is great
but have a little problem about I order black one but sent me red one.
& I e-mail to seller to tell about this problem
he so kind. I deal with him with refund 10% from price. it's not much but I like his responsibility.
hey can I see some pic of device when with case of your please
here mine
the gel case in the OP doesn't have speaker cutouts. Is that right?
stanggman75 said:
the gel case in the OP doesn't have speaker cutouts. Is that right?
Click to expand...
Click to collapse
Hi,
I'm the OP. The one (white) that I got does have cutouts for the speakers (both the speaker below the rear camera and the other one near the "bottom" of the SGP5).
Jim
I bought this gel case and these styluses,
http://www.ebay.com/itm/180721123550?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/180658846208?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
This case has two additional cut out area, one for the upper left corner and one to the left of the usb port on the bottom. All cutouts work and the buttons are covered, but the area is raised so its easy to access them.
I originally bought a $10 dollar stylus and these ones are much cheaper. They aren't made of a metal body but they do the job if anyone needs styluses for their device.
UnsignedZero said:
I bought this gel case and these styluses,
http://www.ebay.com/itm/180721123550?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com/itm/180658846208?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
This case has two additional cut out area, one for the upper left corner and one to the left of the usb port on the bottom. All cutouts work and the buttons are covered, but the area is raised so its easy to access them.
I originally bought a $10 dollar stylus and these ones are much cheaper. They aren't made of a metal body but they do the job if anyone needs styluses for their device.
Click to expand...
Click to collapse
Care to share some pics along with your unit? I'd like to see if it fits perfectly. Only available here is the tpu case (jelly type).
EDIT:
Nevermind i saw already in ebay. Looks good!
http://www.ebay.com/itm/TPU-GEL-Sil...AU_MobilePhoneAccessories&hash=item5d2f8c826e
_______________________________
~ Sent from iOS/Android device
White New Soft TPU Gel Case Cover Skin
Thanks to those who recommended this skin cover for the Samsung Galaxy Player 5.0 from seller "thomaszoe1314" on ebay.
White New Soft TPU Gel Case Cover Skin For Samsung Galaxy S WiFi 5.0 G70 YP-G70 (180721120989)
I paid $4.88 with free shipping from HongKong! I ordered the white one on 12/15 and was delivered just two weeks later by USPS even with the holiday rush.
It fits perfectly snug and was just right in terms of tightness for installation without forcing too hard. It has solved the problem with the SGP5.0 being hard to hold onto and also when setting it down on a hard surface without a thud.
The skin is attractive and has a couple of unnecessary holes for other versions but they dont do any harm.
Along each edge where where you pick it up, there are nice treads to improve the grip even further.
When sliding SGP5.0 into my shirt pocket the plastic doesn't "stick" to the fabric and make it hard to get into my pocket.
The plastic doesn't stink like some cheap toy plastics and the molding details are all refined and top quality.
The buttons (power and volume) are fully functional beneath the plastic.
Very pleased, and thanks again to the previous posters here that alerted me to this bargain!
jimcpl said:
Hi,
I just got a gel case and set of 3 screen protectors off of Ebay:
I'm not associated with the seller, but thought that if anyone was interested:
- The gel case (I got the white one) fits pretty well. Snug, and all the holes in the right places (the power and volume+/- buttons are covered, but slightly raised).
- The protectors were actually not bad. I always hate putting these things on (bubbles, dust), but these were pretty heavy gauge plastic or whatever, so not bad for 3-4 USD (incl shipping).
- Shipping to East Coast U.S. took about 2 weeks (seller shipped next day, but then...).
Just an FYI.
My daughter, who also has an SGP5, bought locally, and paid almost $50 for case and protector (with "lifetime warranty"). She's still telling me she likes hers better, but for less than $10, I like mine ...
Jim
Click to expand...
Click to collapse
I ordered the screen protectors mentioned above. Mine came with a hole in them for the home key, which my device doesnt have. Waited 2 weeks for nothing. Now to find the US version...
toddracing said:
I ordered the screen protectors mentioned above. Mine came with a hole in them for the home key, which my device doesnt have. Waited 2 weeks for nothing. Now to find the US version...
Click to expand...
Click to collapse
Hi,
Actually, I hadn't noticed that, but when I put the 2nd one on another SGP5, there is a piece that covers the home button area that can be popped out (which I actually did). Sorry about not mentioning that in the original post.
Jim
P.S. My SGP5s are all US versions.
Just wanna share this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thephantom said:
Just wanna share this.
Click to expand...
Click to collapse
Nice. What case is that?
Cow123 said:
Nice. What case is that?
Click to expand...
Click to collapse
It's actually a generic rubbery soft case i got from the mall at less than 4usd. Works pretty well and despite being soft it gives a snug fit. Comes in diff colors too
Sent from my Nexus S or my YP-G70 using Tapatalk
@thephantom Do you have to link to where you purchased this from?
mxjcmxjc said:
@thephantom Do you have to link to where you purchased this from?
Click to expand...
Click to collapse
I'd love to help you out but as I didn't buy it online, I don't have a link. But I sure can check on it later for ya. I gotta finish up some chores first. Hehehe
Sent from my Galaxy Nexus or my YP-G70 using Tapatalk
thephantom said:
I'd love to help you out but as I didn't buy it online, I don't have a link. But I sure can check on it later for ya. I gotta finish up some chores first. Hehehe
Sent from my Galaxy Nexus or my YP-G70 using Tapatalk
Click to expand...
Click to collapse
Must be some long chores since he never posted back.
RMXO said:
Must be some long chores since he never posted back.
Click to expand...
Click to collapse
A month long of chores actually. Couldn't find a link. Sorry
Sent from my YP-G70 using Tapatalk 2
thanks for the links
i can't find a case in my country
i will buy online today
thanks for all
Also
You guys also know that ebay has invisible shield full protection and screen covers for the SGP player 5.0 and 4.0 with versions for both the physical and capacitive homescreen buttons? They are around 20 dollars on the invisible shield site, but you can get them for less on ebay
i'm using imak jelly case from ebay like this,
good quality, but glossy case
Well, i was looking for Love Mei cases reviews around the accesories forum, but it seems that no one ever talk about this case, so i'm opening this thread to show this beautoful case, and ask if any one has see it.
on the official webpage says that it cost $US88, but i have seen it in other online stores in half of the price.
http://www.aliexpress.com/item/Love...uminum-Case-For-Galaxy-Note-3/1634195007.html
http://www.amazon.com/Shockproof-Dustproof-Waterproof-Snowproof-Protective/dp/B00ICCV9M6/ref=sr_1_61?s=wireless&ie=UTF8&qid=1392161382&sr=1-61&keywords=love+mei+note+3
http://www.ebay.com/itm/Aluminum-Metal-Gorilla-Waterproof-Case-Cover-For-Samsung-Galaxy-Note3-Love-Mei-/261379032367?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3cdb67852f
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here its the demo video for the Galaxy S4 case. this is almost the same, but with slim waist
Review from the regular Powerfull Case. this is the same but with a curvey slim waist shape. all the protection are the same:
And here is the official web:
http://www.lovemeicase.com/pro.asp?id=45
Looks nice but I wonder if it will fit the wireless charge back that I have. I also notice it needs two screws so for those who change batteries often, you'll have to carry the screwdriver. Otherwise, it looks awesome. Thanks for the link!
Are you sure that this case is as resistant as the one on the video? Because I'm thinking about getting one, and I like this one more than the one on the video, but if you can't throw it on the floor and "drive a car over it", what's the point of it?. It looks great but it's really big and Note 3 is already big. So if you don't get perfect protection than there's no point of getting one..
thx for the link
if it's from ali it's probably a fake.
DeathBlimp said:
if it's from ali it's probably a fake.
Click to expand...
Click to collapse
Ali's now have a buyer protection policies, that if you dont receive whats was offered to you, you can ask for a full refound, or keep the object and receive a partial refound.
http://www.aliexpress.com/buyerprotection/index.html
hrvoje334 said:
Are you sure that this case is as resistant as the one on the video? Because I'm thinking about getting one, and I like this one more than the one on the video, but if you can't throw it on the floor and "drive a car over it", what's the point of it?. It looks great but it's really big and Note 3 is already big. So if you don't get perfect protection than there's no point of getting one..
Click to expand...
Click to collapse
Hi, yes, its the same technology, but with another shape. here its the video of the small waist, but for the iPhone 5:
do, im not sure if it can resist a car, or the motorcycle like on this video, but its a rugged case and it will protect your $700 bucks inversion.
hope it doesn't hurt reception and gps like the original love mei case does. I bought the regular one and while it's badass and crazy protection, I can't use it due to reception getting knocked down.
****motions said:
Hi, yes, its the same technology, but with another shape. here its the video of the small waist, but for the iPhone 5:
do, im not sure if it can resist a car, or the motorcycle like on this video, but its a rugged case and it will protect your $700 bucks inversion.
Click to expand...
Click to collapse
I thought about getting one for the summer... because i think it's to massive to carry it all the time. Please write a small review ( just if all of the signals work, and are you ok with the case) if you order it.
I like the gold version, any stock in the UK?
****motions said:
Well, i was looking for Love Mei cases reviews around the accesories forum, but it seems that no one ever talk about this case, so i'm opening this thread to show this beautoful case, and ask if any one has see it.
on the official webpage says that it cost $US88, but i have seen it in other online stores in half of the price.
http://www.aliexpress.com/item/Love...uminum-Case-For-Galaxy-Note-3/1634195007.html
http://www.amazon.com/Shockproof-Dustproof-Waterproof-Snowproof-Protective/dp/B00ICCV9M6/ref=sr_1_61?s=wireless&ie=UTF8&qid=1392161382&sr=1-61&keywords=love+mei+note+3
http://www.ebay.com/itm/Aluminum-Metal-Gorilla-Waterproof-Case-Cover-For-Samsung-Galaxy-Note3-Love-Mei-/261379032367?pt=US_Cell_Phone_PDA_Cases&var=&hash=item3cdb67852f
Here its the demo video for the Galaxy S4 case. this is almost the same, but with slim waist
Review from the regular Powerfull Case. this is the same but with a curvey slim waist shape. all the protection are the same:
And here is the official web:
http://www.lovemeicase.com/pro.asp?id=45
Click to expand...
Click to collapse
adds to much bulk, I'll pass
DeathBlimp said:
if it's from ali it's probably a fake.
Click to expand...
Click to collapse
So buy it on amazon then.
I just had a chat with the reseller in Chinese. It's a Chinese designed and manufactured product, which means it is quality. I ordered one and will let you guys know.
votum said:
So buy it on amazon then.
I just had a chat with the reseller in Chinese. It's a Chinese designed and manufactured product, which means it is quality. I ordered one and will let you guys know.
Click to expand...
Click to collapse
cause amazon is like 20 times more expensive. so i rather try this one out to see if it's good enough. I bought it too so i'll see if it's good enough.
No one has this? Im wondering how it works. If it has any signal loss and i would love to see pictures
Sent from my SM-N900A using Tapatalk
Mayonesa said:
No one has this? Im wondering how it works. If it has any signal loss and i would love to see pictures
Sent from my SM-N900A using Tapatalk
Click to expand...
Click to collapse
I am using it right now to type this. I have been using the regular model for about two months now and the gps is the only issue I have. I just got the slim waist model from a friend today. She said that it killed her signal at her house, but she lives in the woods and only gets 2 bars at best. I live in town and I'm fluctuating between 3-4 bars all the time. I have not tried the GPS since I put the new case on. I'll upload a few pictures in just a second for those interested. I like the case a lot.
I am a police officer and I keep it in the front pocket of my outer vest. It gets rained on regularly and I just wipe the water off the screen and keep going. The silicone on the back makes it grip your dash perfect without sticking in your pocket.
I got my first off Amazon and the case I'm using now came from eBay. Both were shipped from China and it took about two weeks. Both came in nice packaging and the quality of the cases is great. I'll answer any questions you can come up with. I just discovered the thread.
Sent from my SAMSUNG-SM-N900A using Tapatalk
i read that this case has issues with people hearing you as the mic is obsructed. what complaints have you had abnout this? im sure you call supervisors and dispatch a lot?
Love Mei Note 3 Case
Well I can say for sure that this case is a TANK as far as protection goes. Now, I did contact someone from the company to make sure that the problems with the previous version of the case was fixed and he said yes. So I bought one, Black on Black.The new waist design is cool, but some of the reported problems STILL exist. NO 4G LTE inside a building or residence. I had to remove the mesh behind the ear speaker in order to hear anyone. The bottom speakers work very well. The screen most definitely is not SMUDGE or FINGER PRINT proof. I know that no screen actually is, but this screen is freak-en bad. So DO NOT GET ONE IF ANY OF THESE PROBLEMS BOTHER YOU. Especially you OCD clean screen freaks. The aluminum is just as bad with finger prints, sorry. The rubber on the back and sides is a DUST MAGNET. The phone is very heavy, but with all that said, I am very happy with buying it. I bought it through EBAY for $30.00, and it did ship very quickly from China. I wanted a heavy duty case to protect my $700.00 investment and I found it. I am a law enforcement officer and a gym rat, so this case will go through hell and back. The issues I mentioned do not bother me, but may bother some, so I hope I answered all questions.
Respectfully,
Rick Davila :fingers-crossed:
Be nice to see some pictures or a video of the new slim waist version please, nothing to be found as of yet anywhere online, aside from the official website.....
anyone who wants a yellow one, I'll sell ya mine for what I paid for it ($30). I'll pay the postage.
it is a tank and will protect like no other, but can't stand how heavy it makes it and the gps reception and cell signal is unacceptable.
I ended up buying a Kraken case for the days I need real protection and on the normal days I run the Aegis.
1tfrot said:
anyone who wants a yellow one, I'll sell ya mine for what I paid for it ($30). I'll pay the postage.
it is a tank and will protect like no other, but can't stand how heavy it makes it and the gps reception and cell signal is unacceptable.
I ended up buying a Kraken case for the days I need real protection and on the normal days I run the Aegis.
Click to expand...
Click to collapse
Can you snap some pics of the case with phone installed please? There are none online
I may just remove the metal areas that cover the antennas, if needed.....
Is your case genuine, or one of the cheaper clones?
As the title says. I just picked up my new GS7 last week. And while I have always liked the looks of my phones in the past, I gotta admit, I always thought the iPhones looked better. Dating back to my first smartphone, the Blackberry Storm (if any of you remember that mess), I had always thought the iPhone was the better looking of the smartphones. When my upgrade was up from the Storm, VZW was HEAVILY advertising this new phone called the Droid. I almost got the Storm 2 because at the time, I didn't think the Storm was a bad phone, but on a whim bought the Droid I saw during every commercial break. It opened my eyes to how great Android was, and how garbage BB touchscreens were. I've always used Androids since. I've had a few iPhones here and there, but I just HEAVILY preferred the Android experience over iOS and got rid of my iPhones within a week or 2 of originally acquiring them. But now, finally, I can say that my Gold Platinum colored Galaxy S7 even looks way sexier than any iPhone. I seriously love the way this phone looks. I also always carry my phone in my pocket. I've tried belt-clips, but I always would get them caught on counters and stuff, typically resulting in breaking the clip and often damaging my phone. That in mind. I'm looking at outfiiting my phone with a slim profile case, not only for pocket comfort, but also to keep as much of the original look of the phone as possible. So I'm looking at gold and clear cases primarily. I also don't want a lot of grip, as before, I've had times that I had a VERY grippy case that when I thought I slid my phone in my pocket, it actually gripped to the edges of the pocket and fell when I wasn't paying much attention. Sorry for the novel background. But on to the meat and potatoes of the post:
I'm looking at getting a tempered glass screen protector and case. As far as the screen protector, I'm 90% certain that I've decided on the Coral Tempered Glass with the matching Gold top and bottom. I've always used ZAGG before and have no complaints with them. But their Contour Glass model isn't out yet and want to get something ASAP. If anybody has any experience with the Coral, please chile in and let me know how it was. Or if anybody else has a tempered glass screen protector they really love that may sway me, also, please chime in and let me know of your experience.
Now. On to the cases. I found a couple I liked just on Amazon, and then read that some users found some they really liked on ebay, so checked there and found a few more I'm very interested in. The beauty with the eBay ones is they're dirt cheap. But the down side is, I don't know how well they will fit and/or protect my phone. And coming from typically China'Hong Kong, it'll take a while to receive them. So I've narrowed it down to 5 that I really like (I honestly could easily make it 10, but that's too ridiculous)....
So. Number 5:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.ebay.com/itm/28179505052...49&var=580958289146&ssPageName=STRK:MEBIDX:IT
-at $7.99 it's incredibly cheap. It's a very good looking case. Although the pics don't show the S7 version. All the other versions look VERY well made. Even have a stock-looking logo of the phone on them. Even the other color schemes look tempting like the black/gold or white/gold. In all, it looks very refined for an eBay case of this price range. I don't think I'd rate it as 5th place on my considerations really. I really like them all. This one is an especially clean looking case though.
Number 4:
http://www.amazon.com/dp/B01B1V3QJ8/ref=twister_B01F341F92?_encoding=UTF8&psc=1
-at $29.95, it's probably the most expensive on my list. But I've heard great things about UAG. It looks rugged. But that also detracts from the natural look of the phone I want to show off, even in the ICE (clear) color.. So it's a bit of a double-edged sword to me.
Number 3:
http://www.ebay.com/itm/20152550018...49&var=500749182756&ssPageName=STRK:MEBIDX:IT
-at $15.19, this falls about right in the middle of the price range. Though it does cover the entire back of the phone, it still looks pretty close to the regular back of the phone while providing low profile protection.
Number 2:
http://www.ebay.com/itm/27216969983...49&var=570981080744&ssPageName=STRK:MEBIDX:IT
-at $10.98, it's still very cheap. It's 2-piece metal screw-together with a clear back. So it's very low-profile, has a gold protective bumper with a simple clear backing to show the phone and not the case. So I really like the idea of this case
Number 1:
http://www.ebay.com/itm/38154689041...49&var=650654760726&ssPageName=STRK:MEBIDX:IT
-at $14.99 it also comes right in the middle of the price range. And while it also covers the entire back of the phone, it looks like it's the matching color. And I like that it's a brushed metal which won't get messed up by being kept in my pocket. And it still provides protection while keeping a low profile. Plus, it's a brand I've heard good things about, so I'm not worried at all about any fit or performance.
so anybody with any experience with these, please let me know how you liked them. Or anybody else that has any opinions on the cases, let me know what you think of them. I REALLY like em all and my OCD is making it very hard for me to choose just one. Thanks for reading, and thanks ahead of time for your replies
Laventura said:
check this out http://forum.xda-developers.com/galaxy-s7/accessories/amazon-rated-case-otterbox-uga-speck-t3373758
Click to expand...
Click to collapse
thanks for the link but I've already read that whole thing. That's actually the direct reasoning behind my considering the UAG that didn't fit my criteria nearly as well as the other 4 I'm looking at
I recommend you to buy wooden cases for your GS7. Its look contemporary, stylish and would provide the best protection to your Smartphone.
jhonwright56 said:
I recommend you to buy wooden cases for your GS7. Its look contemporary, stylish and would provide the best protection to your Smartphone.
Click to expand...
Click to collapse
if you read my post. A wooden case is essentially the exact opposite of what I'm looking for. I do like how the reclaimed wood cases look, but I want my phone to look as stock as possible. A wooden case would make it look COMPLETELY different
think I found my winner:
http://www.ebay.com/itm/For-Samsung...acb1220&pid=100033&rk=4&rkt=4&sd=301905544453
low profile clear case to show off the phone perfectly while providing protection without any added bulk AND a matching gold platinum 3D edge-to-edge tempered glass screen protector. And since they come as a packqge, I don't need to worry about fitment issues. For only $14.99 shipped from CA, so I won't have to wait a month to receive it. And I've only heard good things about Nillkin brand cases, it's not even a no-brand as I was expecting to get. At $14.99, that's what I was expecting to pay for the case alone, and another $20-20 for the tempered glass screen protector. So not only did I fit all the criteria I had, it's a name-brand case, AND includes a tempered glass screen protector that I was most definitely going to add, I don't need to worry about the 2 fitting together, and it only comes from CA so I'll get it quick. I plan to read some seller reviews and wait about an hour and then pull the trigger and order it
ETA: after looking at the seller's feedback...
A) they have an obscene amount of positive feedback in general at over 200K. And only sell phone accessories. That's unbelievable
B) the feedback I was able to find for this specific package was all positive
so i'm VERY confident in the seller. And quite confident in the actual product based on the specific reviews too. I look forward to receving this product much more now
I think that best combination for Galaxy S7 is Ringke Slim case with icroo fullscreen protection. which I have, and it looks awesome!
https://www.youtube.com/watch?v=8dNkMydF-pM
As an update. Since I made this thread, I contacted ARTech 21, and they're sending me some cases to review as well. I particularly like the Vivid and Jelly models:
the jelly really fits what I was looking for in this thread. A low profile case that shows off the phone, not the case, while still giving good protection. And the vivid is just a really cool looking totally different style case. I'm really excited to play with em and will have reviews of all of them, including how the screen protector fits with all the different cases, which I'm very curious about
I got #1 and didn't like it at all. Sent back to Amazon. Mic and noise canceling mic holes off and it doesn't have a good grip...
new to S7 as well, day #3 today
I bought Lifeproof Fre case with my S7 http://www.lifeproof.com/en-us/galaxy-s7/fre-for-galaxy-s7/lpfr-sam-gs7.html as i couldn't be bothered with separate shopping research for a screen protector and then a case
Liking it so far
Don't buy number 2. It's too tight on the phone and you can't use the power or volume buttons.
Sent from my SAMSUNG-SM-G930A using XDA-Developers mobile app
Between the UAG and a similar Spigen tough case, which would be a better/slimmer choice?
https://urbanarmorgear.com/collecti...oducts/case-for-galaxy-s7?variant=14392744836
http://www.spigen.com/collections/g...axy-s7-case-tough-armor-1?variant=12163553089
BG music
Which elevator did you record the background music at?
flax said:
I think that best combination for Galaxy S7 is Ringke Slim case with icroo fullscreen protection. which I have, and it looks awesome!
https://www.youtube.com/watch?v=8dNkMydF-pM
Click to expand...
Click to collapse