Related
Nookie Froyo 0.6.8
is a development build of Froyo 2.2.1 for the Nook Color.
ClockworkMod flashable! - info below, please *read carefully* before flashing!
This build is near-AOSP and contains almost no extra software not deemed required for the device to function normally.
It is pre-rooted with SuperUser, busybox, SoftKeys v3.07, and ROM Manager 3.0.0.5 however.
The eventual intention will be a build that other devs and users can easily fork and create their own custom builds, themes, roms, etc.
** THIS IS A DEVELOPMENT BUILD **
Use this at your own risk! Myself, XDA, and NookDevs are *NOT RESPONSIBLE* for anything that happens directly or indirectly related to this software!
We're approaching a daily driver! Most things work now, including mp3 and video playback. Post any bugs you find here!
I'd like to thank all the nook color devs involved in getting to this state, testing, documenting, etc. We've got an amazing group of minds behind this device!
INFO
The microSD card image contains 4 partitions:
/dev/block/mmcblk1p1 : boot (fat32)
/dev/block/mmcblk1p2 : system (ext2)
/dev/block/mmcblk1p3 : data (ext3)
/dev/block/mmcblk1p4 : sdcard (fat32)
Use these partition IDs when following guides that require mounting/remounting filesystems.
What's Working:
MP3 playback
Video playback
Youtube, Pandora and other mp4 streaming apps (apps not included)
Accelerometer!
Wifi (adhoc + infrastructure!)
Graphics acceleration (LWP!)
Sound
Browser
Mostly working
Lockscreen is wrong size - REBOOT to fix
Not included / Not working
gapps ( gmail, youtube, maps, etc ) - can be installed, youtube fixed!
Bluetooth
FM radio
This build was created using the B&N kernel sources for 1.0.0, Omappedia's Froyo source ( currently RLS27.9.0.RC0 ), and binary drivers from TI for wireless, SGX530 acceleration, and DSP codecs.
Download:
This SD image requires a 2GB microSD card! Bigger is OK, smaller is not ok!
Note: if you wish to use a larger microSD card, you can use a partition editor to increase the size of the /sdcard partition (partition 4, fat32) *after* writing the image to your card.
Simply unzip this image and dd the file to your (empty) SD card, just like nooter.
nookie-froyo-SDIMAGE_2GB-0.5.1.gz 76459ec18fd32885257a3c8b7dbb2b76
nookie-froyo-SDIMAGE_2GB-0.5.6.img.gz 74e5310bcc21edf326bdc73a5652c124
nookie-froyo-SDIMAGE_2GB-0.5.8.img.gz 15158e735517c209a8f2ed14683a589c
nookie-froyo-SDIMAGE_2GB-0.5.9.img.gz 7d30f56eeede98ee1e99a0766f69dea3
nookie-froyo-SDIMAGE_2GB-0.6.6.img.gz fc58aa06fcfe1f46939ab72e38292abe
nookie-froyo-SDIMAGE_2GB-0.6.7.img.gz 92ef91dbac7a7baad3999256597b7920
nookie-froyo-SDIMAGE_2GB-0.6.8.img.gz
MD5: 18e7cc8393681ec590f698b7a671e859
If you want to customize your SD card, upgrade an already burned Nookie Froyo SD, live on the edge and burn it into your eMMC, or just want to poke around, download the base filesystem:
nookie-froyo-base-0.5.1.tar.gz 3e95a33e3926bc88011e66a724dccf8f
nookie-froyo-base-0.5.6.tar.gz 4419b21dd8eb56f6a6537345aa1c8ba1
nookie-froyo-base-0.5.8.tar.gz 2c279dbdaa6aad480590d55e48abf8ca
nookie-froyo-base-0.5.9.tar.gz 093a964685f0cbea2ef1aa8f6f0d7581
nookie-froyo-base-0.6.6.tar.gz 2304e337c351c667f27eb9aa4c3791b8
nookie-froyo-base-0.6.7.tar.gz 99b6a9d991951c368cf1f6b3429be958
nookie-froyo-base-0.6.8.tar.gz
MD5 c3c7aea7cdf8a3dde32acc1694f633aa
This archive also contains an uncompressed ramdisk image which you can easily edit, package, and copy to your boot partition.
ClockworkMod Flashable ZIP!
*IMPORTANT*
- please wipe data/factory reset if you're coming from B&N stock firmware or another rom!!
- please see other threads about installing and using CWM recovery - keep this thread to NF issues please
- this has been tested only using CWM 3.0.0.5 downloaded from market, be warned it may not work with IOMonster's kit or other versions. Let us know if you try and it does!
- replaces kernel and ramdisk - if you were using an alternate kernel you'll need to reflash it.
- This will irrevocably erase and replace the software on your eMMC! MAKE BACKUPS BEFORE FLASHING, you have been warned.
If you're upgrading from an older version of Nookie Froyo, you should not have to wipe - however if you do have problems *wipe data* and try again.
*IMPORTANT* - this zip does not require any extra steps such as formatting /boot, changing system permissions, and does not replace or remove CWM. If you are coming from a ROM that required these extra steps and are having issues, *please post your questions there* so the dev can be prompted to correct those issues properly.
If you're coming from a rom that doesn't support CWM properly see the following thread:
http://forum.xda-developers.com/showthread.php?p=11437545
Installing /system will take some time, and the progress bar doesn't update in realtime; you haven't 'locked up', just be patient as it may take a few minutes.
nookie-froyo-flashable-0.6.6.zip 6f61a464483ecf45d6e6e2d199b44d6c
nookie-froyo-flashable-0.6.7.zip 9bd13877addbad725a5bfe1eb13412df
nookie-froyo-flashable-0.6.8.zip
MD5: 03544d6a5a52eebdb468c89a5a2581e9
Please do not PM me for help, that's what this forum and the IRC rooms are for - I simply do not have the time to answer all of your questions, and asking them in a public forum will allow others with the same issue to help or learn from your experience!
CHANGELOG
v 0.5.6
permissions corrected on /system/bin/input for SoftKeys
corrected default cpu governor to conservative
added SuperUser
added busybox 1.17.2
added SoftKeys 3.00 ( thanks bpk! )
AdHoc WIFI support enabled
crypto/cryptofs added in kernel for ASEC support (required for installing some apks such as Angry Birds)
v 0.5.8
uses the /cache partition on eMMC instead of combining with data
replaces u-boot.bin to remove the 'touch the future..' splash (trademark)
increased refresh rate to improve responsiveness and reduce flicker (see tips in the next post)
added sensors lib - accelerometer works!
v 0.5.9
default web browser FC fix - no longer dies on location requests!
v 0.6.6
Youtube, Pandora, and other streaming media should now work.
added codecs for more media formats - including hw accelerated mp3 and video
vold reverted - no more broken SD card message
flashable zip!
updated SoftKeys to 3.07
fixed a /cache issue which sometimes prevented market downloads
v 0.6.7
SD card mount fixed - please post if you continue to have issues
Added back Mms, Phone, Camera, Telephony apks to resolve missing apps in Market - more apps should be available
Modified CWM zip reliability
v 0.6.8
Corrected improper handling of Format SD Card option - no longer formats /boot!
Touchscreen enhancements - no need to toggle screen on boot and better responsiveness around the edges - thanks deeper-blue!
Please see the updated issues/workarounds list in the following post
For more information, sources, and install instructions, please see:
http://nookdevs.com/NookColor:_Nookie_Froyo
Need help? Want to contribute? Join us in IRC! irc.freenode.net
#nookcolor - general chat, questions, ask for help here
#nookie - development
Do not try to Format SD card from Settings -> SD & Phone storage!
- there is currently a bug that causes the system to format the /boot partition instead of /sdcard when this option is used, leaving your NC unbootable. Format your SD card in your PC or another device if you need to! - fixed in 0.6.8!
FIRST BOOT TIPS -
On first boot, Launcher and SoftKeys will fight for control of the home intent - that is, when you boot the first time, your NC will ask you to pick your home activity.
*CHOOSE LAUNCHER* at first (DO NOT select 'always use this action'), and let the system boot and stabilize (3-4 minutes).
Hit Home (the N button). You'll be asked to choose your activity again, this time choose SoftKeys.
Try using one of the SU-required buttons (back or menu), and after a few moments SuperUser will prompt you to accept the action.
SoftKeys 3.06+ now prompt for SU permission at startup, just accept the superuser prompt when it pops, you'll still want to let the system stabilize for a minute or two.
If SoftKeys fails to ask for SU permissions, "Unable to execute as root":
Go to Settings -> Applications -> Manage Applications -> 'All'
Select SoftKeys from the list
'Force close' Softkeys if it's running, then 'Clear defaults'
Hit the N button, choose SoftKeys when prompted to choose your home action, accept the SU prompt when it pops.
Workarounds for some known bugs/issues:
(default in 0.5.8+) Improved Refresh-rate (no flicker! thanks [mbm]!): this should set the refresh rate to 68hz, the supposed default for the Nook Color's LCD panel -
Code:
adb shell echo 68000,1024/70/200/40,600/10/11/10 > /sys/devices/omapdss/display0/timings
Browser: force closes when opening a website that tries to use location services, due to the missing GPS. Try browsing to a url by typing in the google search box, and if you can get into the browser menu changing your homepage away from google will stop it from FC'ing on open.
Lockscreen wrong size: Simply reboot to correct this.
Touchscreen is slow/unresponsive:
Turn your screen off and then back on.
Disable Haptic Feedback in Settings -> Sounds.
Also, see this page for a possible calibration fix: http://nookdevs.com/Recalibrate_the_NookColor_touch_screen
(fixed in 0.5.6 w/included SoftKeys 3.00) No buttons! Try: http://forum.xda-developers.com/showthread.php?t=860153
(fixed in 0.5.6) SoftKeys - in 0.5.1 softkeys' buttons do not work due to a permissions issue. To fix, do:
Code:
adb shell mount -o remount,rw /dev/block/mmcblk1p2 /system
adb shell chmod 0755 /system/bin/input
Please post issues/workarounds/bugs in this thread, I'll try to keep this list updated.
To answer from the other thread...
Timeframe-- well, this isn't me doing this. But I think the devs just want to take the edges off, so be patient... I'm just the messenger on the news that it's been done. This is other people's accomplishment.
In fact, froyo was done weeks ago, though not entirely from open-source/freely distributed components like this (as far as I know).
To answer some questions--
BT not working, FM not working, accellerometer not working. Softkeys should work... dont' see why not anyway. It's stock froyo. No gapps, no Superuser.apk, no nothing over and above AOSP. Overclocking not in but should be possible... video playback hasn't been tried (it's early still!).... battery life who knows I haven't even had a chance to let it run down... I posted because the news was "out" anyway. I also can't compare to stock because I've never run stock, believe it or not. But it's based on the same kernel 2.6.29. It boots off a SD partitioned for system, data, cache, and sdcard. Only thing (I think) it touches on the internal storage is resetting that boot counter, otherwise you'd only get 7 boots at a time. Doesn't need much space. 2GB should be enough. That's what phones have anyway. Guess it depends what you want to do with it. Performance is decent, not steller compared to my g2 at least. Will benefit from OC.
devis said:
@fattire
Questions on everyone's (well, mine at least) mind... please answer as much as you can, and a big big thank you!!!
1. Is BT working?
2. Is FM working?
3. Can we still use SoftKeys for hardware key emulation?
4. Can we overclock the processor?
5. How's the video playback?
6. How's the battery life compared to stock?
7. Since you're booting from SD, does that mean the internal memory of the NC remains untouched, should we need to boot stock?
and
8. How does the device feel overall?
Click to expand...
Click to collapse
Nice stuff guys keep up the stellar work
Sent from my LogicPD Zoom2 using XDA App
So awesome, looking forward to the progression of this!
I got my SD to boot tonight!
It defiantly isn't for the faint of heart but it seems to work well enough as a good base to start on. Pretty snappy to boot.
I would like to emphasize that this is VERY rough around the edges and if you aren't planning on hacking with the kernel, or code, or attempting to make your own rom then this is NOT for you.
http://i.imgur.com/WRyNV.jpg
http://i.imgur.com/H4ahM.jpg
Defiantly awesome work (and pure AOSP + TI drivers) which means no propritary B&N bits
Thanks for releasing such and early build to the public. It's not often you see that.
(I won't even consider playing with this build)
As a humble Analysts I grovel at the feet of your magnificent tech prowess.
(thanks)
Does this include a working JIT or is that one of the things in progress?
That seems to be one of the more compelling things from froyo (at least for a device with more internal storage than a nexus one). I would expect (well, hope anyway) that the froyo JIT would have a noticeable impact on the speed...
Mods, can we please stickie this?
Very awesome... Will try it out later today!
Since this runs off the sdcard can you power down the NC and remove the sdcard and boot normally?
Novarider said:
Since this runs off the sdcard can you power down the NC and remove the sdcard and boot normally?
Click to expand...
Click to collapse
Read: http://nookdevs.com/NookColor:_Nookie_Froyo#After_you_have_burned_the_uSD_card
To get back to stock, just remove the uSD card and reboot.
Click to expand...
Click to collapse
It has all the info you want, and is mentioned in the first post.
cicada said:
Workarounds for some known bugs:
No buttons! Try: http://forum.xda-developers.com/showthread.php?t=860153
Click to expand...
Click to collapse
You also have the option of converting the volume buttons to back/menu as well. It is documented in this thread, but the filenames have changed in this build. You will need to modify the following files..
/system/usr/keylayout/qwerty.kl
/system/usr/keylayout/twl4030-keypad.kl
I am not a developer.
I am not likely to become one at this stage of the game...
I am, however, either brave or stupid because I am downloading the image and will see if it will boot on my NC.
I do this because:
A) I want to SEE froyo running on my NC, and
2) If I have any problems, feedback might help the devs
I love seeing all the progress that has been made on these things.
Is flash supported in the browser with this initial froyo build?
jay084 said:
Is flash supported in the browser with this initial froyo build?
Click to expand...
Click to collapse
I tested flash and it does work.. The flash plugin is not included in the build however, I had to find it and install it via ADB.
Just rebooted back to my regular rooted NC system after pulling the sdcard and can only say-
Marvelous.
Yes, it is slow, no keyboard and all of the other things that were spoken of in the initial posts, but IT WORKS.
I don't have time to do much else with it right at the moment, but I will mess with it more later.
BertoJG said:
I tested flash and it does work.. The flash plugin is not included in the build however, I had to find it and install it via ADB.
Click to expand...
Click to collapse
Could you post the flash plugin you used? I would really appreciate it. Could you also comment on the quality of flash videos online. I'd like to watch espn3 on the nook...in bed...lol
OK, so I booted the rom, and followed the instructions at nookdevs...
Installing superuser.apk and pushing su seemed to work just fine!!!
Softkeys installed and got superuser permissions and works as well.
Installed astro file manager, and that works fine too...
At that point, I wanted to mount the usb storage and move over a bunch of APK files... mounted the nook and could only see the mlo, img file etc... no problem creating an apk folder and putting files in there, but then I can't see that folder when I look for it in astro....
Any info on simply copying files via USB using this build?
Also, thanks to all the devs for the awesome work... looking forward to playing around with this more!!!
Let's start.
System: Android 2.3.3 (Gingerbread)
DSC ROM is based on Olleh 407/406 beta ROM.
Our team point is to provide best ROM for Streak, stable and fast enough for everyday use.
(and making waiting offical Dell release a bit less stressful )
DSC name was an acronym for Dell Streak Club, but now i'd say it's Dell Streak Community ROM, due to all efforts of everyone, involved in the project (v1.0 download count from my server is over 100.000 now). Thank you guys!
Take a look at Quick Solutions section. It may have an answer for your problem.
Announcement
v2.0 Release information.
Latest update information.
Using 366 BB (AMSS) without blinking leds issue. (Just for information, superseded with 1.2 update)
List of currently supported languages.
Knowing your way around here.
DSC Team Phoenix Universal kernel
Arabic patch:
http://n0p.8bit.fm/streak/v2.0-Arabic.zip
With PDroid:
http://n0p.8bit.fm/streak/v2.0-Arabic-PDroid.zip
Please carefully read all information contained in this post. It will save you a lot of time later.Introduction and changes from original 407/406 Olleh ROM:
Initially made by two members (n0p and wway) of Russian Dell Streak Club. Russian users are advised to start from here.
Current team list:
n0p - it's me
wway - theming/testing.
streakOwner - lots of ideas and testing.
ltrifonov - kernel development/system builder.
greg9100(GSpecial) - kernel development/system builder.
hunderteins - USSD hack, 14 channels WiFi hack.
hPa – kernel/Wifi driver hacks.
lordmorphous - theming/testing/framework hacking.
btvbtv - testing/cable solution/support
uglyrooster - testing/WiFi solution.
khoacoi - file hosting/support.
dsteinberg - testings/ideas.
Trankvilli - testing.
attila.m - extensive testing.
_2bad4u_ - theming.
dr.nemro - Arabic patch.
Ace38 - Wonderful new boot animation for 2.0.
uluvali - testing/support.
Huge thanks to everyone who uses this ROM - for testing, support and important feedback.
Custom DSC-Team kernel. UV/OC, CIFS an TUN support, USB automount/OTG cable support.
Mugen Power batteries support - DSC Mugen Power config.
Deodexed.
Rooted with SimpleSU
Internationalized/Localized
Contains great GingerTrue theme by wway
ICS animations and QuickPanel added by wway.
Stock dialer works on non-stock DPI > 160.
One of random reboot bugs (division ny zero) nailed down.
Changed memory management and OOM grouping a bit.
CPU governor is set to "conservative" to preserve battery. CPU ramp tweaked for less lag.
Manual change instructions. Also please look here.
Stage Launcher removed. Available as additional update.
Some engeneering leftovers removed.See this.
Added theme-independent CRT animation and enabled hardware UI acceleration.
DalvikVM changed. Dalvik parameters changed.
Screen turns on after power disconnect.
Battery level on standard lockscreen.
Revised tweaks (configurable).
Rogers tethering (removed APN lock).
"Backcover removed" detection removed.
Custom bootanimation by Ace38
Patches in WiFi driver - sleep timeout and power management.
DSConfig (system) – DSC ROM configuration tool.
DSC Gain - audio driver gain / brightness control.
Vibration on poweroff/reboot configurable.
Theme-independent Reboot option.
DSC Wallpapers - Launcher-free wallpapers pack.
Third-party apps, included in ROM can be removed due to new post-install process.
WiFi driver hacked to enable 14 channels
Proximity sensor (touchpad freeze) fixes.
Phase2 auth setting fixed.
Power button dejitter patch.
USB automount.
Number of SoD drastically redused. I personally haven't experienced any in two months.
init.d support.
zipalign script added.
Volume levels altered.
Media sounds from FroYo added.
USSD requests work.
Built-in WiFi fixer.
Camera has Torch mode.
Configurable CPU undervolting.
FPS uncap patch.
BB check removed.
EXT4 driver for EXT2/3 filesystems.
Configurable wake by other keys.
Boot time significantly reduced.
Please read following before flashing!
Please delete or move all apps manually to internal memory before flashing.
Guides and flashing instructions
Painless migration from Froyo with all apps.
Known bugs:
Google Maps causes battery drain. Freeze it if you're not using it.
DSC ROM downloads:
http://n0p.8bit.fm/streak/DSCv2.0-rel.zip
DSCv2.0-rel.zip on Google Drive
PDroid patch (lightweight privacy solution, you'll need to install the control app from Play):
http://n0p.8bit.fm/streak/PDroid-v1.31-DSCv2.0.zip
PDroid-v1.31-DSCv2.0.zip on Google Drive
--
Mirror:
http://www.littlemaruko.com/Nopteam/DSCv2.0-rel.zip
PDroid:
http://www.littlemaruko.com/Nopteam/PDroid-v1.31-DSCv2.0.zip
Update (should be flashed only over 2.x.x full ROM) to 2.3:
http://n0p.8bit.fm/streak/updDSCv2.3.zip
updDSCv2.3.zip on Google Drive
Mirror:
http://www.littlemaruko.com/Nopteam/updDSCv2.3.zip
Update for PDroid users:
http://n0p.8bit.fm/streak/updDSCv2.3-pre-PDroid.zip
updDSCv2.3-PDroid.zip on Google Drive
Mirror:
http://www.littlemaruko.com/Nopteam/updDSCv2.3-PDroid.zip
You can safely flash this ROM over any GB ROM without losing your data.
For faster flashing - flash PDroid right after ROM to skip cache rebuilding twice.
Only thing - your account data might (slight chance) be lost, keep that in mind.
If you’re coming from 2.2 ROM – Factory reset is needed. Absolutely.
Standard procedure after flashing zip update:
Wipe Dalvik cache.
Wipe Cache partition.
Fix permissions.
After first boot your home will blink and third party apps installed in data space. This is absolutely normal and intended.
--
DSC ROM "flash me before installing" pack.
[email protected]
Extract it to some folder and run flash(flash.cmd). Instructions provided in batch file itself.
Got flashing leds after flashing ROM? This will fix it.
--
DSC ROM 366 BB and DSP flasher (only for DSC 1.2 and above)
[email protected]
Extract it to some folder and run flash(flash.cmd). Instructions provided in batch file itself.
--
Stage UIhttp://n0p.8bit.fm/streak/DSC_StageUI.zip
Ripped from 406 ROM, but note that you can remove it later by simply uninstalling via standard menu
Phone button works for me.
--
In case you need original 406 ROM:
Olleh 406 ROM, Recovery to flash 406.
--
Add-ons:
Small russian letters on English Swype keyboard in landscape
--
Quickoffice
Themes: (Warning: themes under hide tag are incompatible with DSC > v1.2)Traveller ICS Theme
lordmorphous's Red and Blue
--
nickshertzer's Touch of ICS
--
Standalone wway's GingerTrue v1.1
(can be used to revert to stock DSC theme)
--
wway's GingerTrue Light * Version W/O CRT Animation
--
_2bad4u_'s MattedBlues
Quick solutions:
Use ClockSync! Set it to every 15 or 30 min on any possible connection.
--
Don't forget to launch DSConfig and see what you can configure!
--
Have WiFi problem? Enable built-in Wifi fixer or hPa's patched driver in DSConfig. Or try Wifi Reassociate.
--
Old info: Look here and say thank you to uglyrooster for his efforts.
Also - see this and this
WiFi Fixer may be a simpler and better solution for you. Origin.
--
Tip from attila.m: If cannot lower in-call volume, simply raise it to maximum and then to desired level.
--
Handset volume too loud? Use DSC Gain tool.
--
If you can't end conversation or press buttons in dialer.
Also - you can wave hand over proximity sensor (near speaker), screen will be unlocked after going off and on. Fixed.
--
Using generic cable? Look here.
--
Useful advice from btvbtv
--
Dolphin HD tip from streakOwner
--
Camera has white screen preview? Change debug.composition.type parameter in /system/build.prop to mdp
Setting can be changed with DSConfig.
--
Have flashplayer video streaming problems? AdFree might be the culprit.
--
Rogers tethering.
--
Bluetooth pairing problems?
--
Waking Streak by any button.
Changelog:
22.01.2013 - v2.3 Released Release post.
24.12.2012 - v2.2 Released Release post. Merry Christmas!
05.12.2012 - v2.1 Released Release post.
27.11.2012 - v2.0.1 Released Release post.
23.11.2012 - v2.0 Released Release post.
29.10.2012 - v1.7 Released Release post.
15.10.2012 - v1.6 Released Release post.
11.09.2012 - v1.5 Released Release post.
16.08.2012 - v1.4 Released Release post.
31.07.2012 - v1.3 Updated Release post.
30.07.2012 - v1.3 Released Release post.
18.07.2012 - v1.2 Updated Release post.
17.07.2012 - v1.2 Released Release post.
14.05.2012 - v1.1 Released Release post.
26.03.2012 - v1.0 Released Release post.
23.03.2012 - v1.0 Testing Open test.
19.03.2012 - v0.74 Testing Open test.
27.02.2012 - v0.73 Released Release post.
09.02.2012 - v0.72 Released Release post.
30.01.2012 - v0.71 Released Release post.
17.01.2012 - v0.7 Released Release post.
16.01.2012 - v0.7 open test Release post.
16.01.2012 - v0.7b-pre-3 Release post.
13.01.2012 - v0.7b-pre-2 Release post.
12.01.2012 - v0.7b-pre-1 Release post.
05.01.2012 - v0.66b Release post.
28.12.2011 - v0.65b Release post.
21.12.2011 - v0.64b Release post.
14.12.2011 - v0.63b Release post.
05.12.2011 - v0.62b Release post.
25.11.2011 - v0.61b Release post.
21.11.2011 - v0.6b Release post.
11.11.2011 (11.11.11) - To keep this date and to whose experiencing troubles with v0.54b:
v0.55b.
CPU governor set to conservative.
New streakOwner's tweaks.
wpa_supplicant.conf changed back.
10.11.2011 - v0.54b:
I'd consider this release as experimental, due to the following:
1. CPU lowest frequency is set to 128MHz. This frequency also works on even lower power consumption. streakOwner's idea that proved it's usefullness. Again
2. WiFi watchdog removed, as it consumes energy without actually helping the problem.
3. Change in wpa_supplicant.conf (to eth0), that at least seems to help uglyrooster, while not breaking anything.
4. New, revised version of tweaks by streakOwner
5. As a side effect of my USSD/Tether research - framework contains less Olleh/KT code, but it only make size smaller.
--
I would like to have any report of any regression here or in PM.
Thank you.
06.11.2011 - v0.53b:
GingerTrue theme v1.1.
Enforced internal WiFi watchdog.
Battery level on lock screen.
streakOwner tweaks.
02.11.2011 - v0.52b - Quick change - screen now turns on after disconnecting power (test-me SoD workaround)
01.11.2011 - v0.51b - Kernel undervolted (direct binary hack).
29.10.2011 - v0.5b - branch merge. New system framework from 406 Olleh ROM used.
28.10.2011 - v0.34b - Latest kernel from Olleh used.
27.10.2011 - v0.33b/0.42b - Factory Reset was causing a boot loop. Fixed.
25.10.2011 - v0.41b. Put back memory management from v0.3b-v0.32b
25.10.2011 - v0.4b. Added DJ_Steve's kernel.
24.10.2011 - v0.32b. Hardware UI acceleration enabled. CRT animation enabled (just for fun)
22.10.2011 - First public release (v0.31b)
Wishlist/ToDo:
Clean
Instructions by SJackalFirst install
1. Charge Streak to 100%
2. Copy DSC_v1.0 to root SD card
3. Get streak into Fastboot, (don't plug usb connector to pc, power on with Camera button pressed. Wait 20 sec, then plug usb connector)
4. Run flash.bat from 'DSC_flashme2' folder via command prompt, and follow all instructions
5. When rebooting, immediately press both Volume buttons to enter the Dell menu
6. With the Volume button navigate to the second option, 'upgrade...', and select by pressing the Camera button
7. The StreakMod menu appears, navigate to 'update using zip', then select the DSC_v1.0.zip file
8. When done, navigate back to the first screen, (back button), and select to reboot
9. While rebooting, again press both Volume buttons and when entered the Dell menu, choose the first option to Factory reset
10. And then wait for a long time
Updates
1. Copy updDSCvx.x.zip to root of SD card
2. Make sure battery is charged at 100%, and that usb is still connected
3. Shutdown and power on with both Volume buttons pressed
4. In the Dell menu, with the Volume buttons choose second option, 'upgrade...'
5. In the StreakMod menu navigate to 'update using zip', then select the updDSCvx.x.zip file
6. When finished, in the StreakMod menu's (also Advanced section), wipe the Dalvik-cache, Cache partition, Fix permission, and optionally wipe the Battery data
7. When finished, navigate back to the first screen using the back button, and select to reboot
8. Unplug the usb connector when the reboot starts
9. And then wait a few minutes
--
Quick flashing the ROM:Instructions for fast flashing:
DSC ROM "flash me before installing" pack.
[email protected]
Extract it to some folder and run flash(flash.cmd). Instructions provided in batch file itself.
Then flash latest ROM and update.
--
Guides:1.Guidelines for migrating from previous releases of DSC Roms.
Since you are already using a version of DSC (Dell Streak Community) you know how to do upgrade, just a reminder please dont neglect, do a dalvik-cache wipe, a cache partition wipe and a fix permission from the StreakMod advanced menu.
Optional, you can also recalibrate your battery by wiping battery data, while you are still flashing things , but be sure the battery was at 100 % before you stared flashing the updates and that the usb is still connected at the time of instalation, once you reboot, remove the usb cable and dont forget to let the first time your battery to drain out totaly until the phone shuts down by itself.
2.Guidelines for migrating form other Gingerbread based ROMs.
Coming from other Gingerbread Custom ROMs to DSC you need to be sure that you have the latest baseband 406 installed already,if you dont know which one you are actually using you can check easily on your phone, find Settings/About Phone/ and check the Baseband version (7th row), should read something like GAUSB1A140614-XX, if you dont see the 406 numbers than you have to update your baseband, as DSC requires and is tested to work with the latest 406 from Dell. To be sure nothing will go wrong during the flashing, it is highly adviced and recommended to use the DSC_flashme2.zip provided by (_n0p_) this way the human error during the flashing process is omitted. All you need is working Windows installation (32bit versions are tested) and the latest drivers form Dell installed on the PC. You need to extract the content of the zip file on any folder you like or the default folder offered by the system, DSC_flashme , but be sure to be easily accesed, you can remove the folder to any place you like after the flashing process, but since the adb.exe sits there , better dont delete it since logcats are highly apprechiated by the DSC team, to find out and erradicate bugs and problems. After the folder is in place , locate the flash.bat and double click on it, a windows DOS terminal will open, the instructions are clear for you , since you are supposedly familiar with such procedure before.
After the first reboot, continue with StreakMod menu to flash DSC which you have already put on your SDcard beforehand. You are required to wipe dalvik, wipe cache partitions and fix permissions before you conntinue with the reboot, due to changes between kernels used in different customs ROMs you are required to calibrate your battery first thing after the system boots.
3.Guide for migrating from Custom Froyo ROMs.
Many of the things are the same as above " Migrating form Other Gingerbread based ROMs", such as the upgrading of the Baseband files, the procedure is the same, note that some apps arent optimised or you might have trouble running them in GB , that is a issue you have to deal with your application developer.
4.Guidelines for migrating from Stock Froyo ROMs.
Running a custom ROM has its advantages and disadvantage (you woid your warranty), advantages are many thou nandroid backups, speed , flexibility, root ability, imporved battery life, tweaks to make your Streak do more than you are used to, quick response from the devs for daily issues etc.
Custom ROMs dont come in .pkg format as do OTA from Dell, but custom ROMs do come in .zip files, which then need to be flashed (installed) into your Streak.To make this possible you need first to install a modified image called StreakMod which would make it possible for you to install DSC. StreakMod is provided also from DSC in the pack DSC_flashme2.zip provided by (_n0p_).
Download the DSC_flashme2.zip provided by (_n0p_) All you need is working Windows installation (32bit versions are tested) and the latest drivers form Dell installed on the PC.
You need to download the main DSC ROM only form the links provided on the first post of DSC in XDA thread, copy it on the root of your SDcard where they can be easily accesed, or you can open a folder called DSC, and you can put there all the zip files from DSC, but remmember the place , as you will need to find those files later from StreakMod menu.
You need to extract the content of the DSC_flashme2.zip file on any folder you like or the default folder offered by the system, DSC_flashme , but be sure to be easily accesed, you can remove the folder to any place you like after the flashing process,
Now be sure you have charged your streak to 100% before you start installing DSC. DO NOT connect your Streak with the PC using the usb connector yet. Power your streak on and immedialty press the camera button, you will see a white screen, this is called the FASTBOOT mode "Wait for SD detect...." then you will see "FastBoot" tap on it and the streak will enter the FastBoot-Mode , you will see "Wait for USB FastBoot detect ...." wait 20 seconds then plug your usb connector to the mobile and after some seconds you will see "FASTBOOT_MODE", now you are ready to turn to your PC again and .....
After the folder is in place, locate the flash.bat and double click on it, a windows DOS terminal will open, follow the instructions there and reboot immediatly after you see the Dell logo within seconds you need to press and keep pressed both volume butons on the side of and then you will have access to Dell menu, select the second option by using the Volume buttons to go up and down the menu, once the second choice "upgrade...." press the camera button and wait several seconds, then a Dell logo with a triangle will appear, that is the StreakMod menu, try navigating the menu up and down with the volume buttons, and once second choice there " update using zip" is highlighted, press the camera button , then you will go to a another menu , where using the same volume buttons , you can navigate thru to find the place where you uploaded the DSC zip file , then once highlaghted press the camara button again and you will see the DSC_script doing its job, once finished , you need to press back button, and go back to the first menu where you select reboot. Once streak is rebooting agian keep your fingers press on both volume buttons, where you will see the Dell menu, now chose the first option, factory reset,streak will reboot by itself, let it reboot , you will see Dell logo, and then the DSC boot animation, wait now patience, if you have done all the above , nothing can go wrong, wait a little , then wait some more , bcs a lot of files is being genearated for first time, etc so this process can take some time, 15 minutes, if you have seen the DSC boot animation, it means everything is ok, otherwise you need to repeat the process again.
--
Manual flashing instructions:Find and download 407 Olleh ROM and corresponding recovery.
Rename 407 .pkg to update.pkg. Rename 407 recovery to recovery407.img
Get StreakMod recovery. Rename StreakMod recovery to recoverysm.img
Put recovery407.img and recoverysm.img to folder with your fastboot tools.
Download DSCv1.0.zip.
Download latest update - updDSCv1.1.zip.
Connect Streak to PC.
Copy update.pkg, DSCv1.0.zip and latest DSC update to SD card of your Streak.
Reboot. When Dell logo appears, press and hold Camera button. Select FASTBOOT.
Issue this commands using Windows command console (cmd.exe) - you should do a "cd PATH_TO_FASTBOOT_TOOLS%" first.
Code:
fastboot -i 0x413c flash recovery recovery407.img
fastboot -i 0x413c reboot
Don't close the command line.
Streak will reboot, now on Dell logo press and hold both volume buttons.
Select "2. Update...". Be patient while 407 ROM is flashing. Note that volume buttons are used as cursor arrows and Camera button as Confirm.
After 407 ROM is installed, Streak will reboot. Press and hold Camera button again when Dell logo appears. Select FASTBOOT.
Issue this commands using Windows command console.
Code:
fastboot -i 0x413c flash recovery recoverysm.img
fastboot -i 0x413c reboot
Streak will reboot, now on Dell logo press and hold both volume buttons (this time we have StreakMod recovery installed).
Select "2. Update...". StreakMod recovery will boot.
Flash DSCv1.0.zip.
Flash latest update (updDSCv1.1.zip).
Reboot, on Dell logo press and hold both volume buttons. This time select "1. Factory reset"
You set!
--
Help us, sending bugreports:Connect Streak to PC.
Dump log (i assume if you have flashed this ROM, you know what "adb" command is):
Code:
adb logcat -d >mylog.txt
If bug causes Streak to reboot, do this:
Connect Streak to PC, issue command:
Code:
adb logcat >mylog.txt
and try to reproduce the issue. (adb will automatically disconnect on reboot).
Send me "mylog.txt" or attach to this thread.
My e-mail is n0p[at]ukr[dot]net
I don't promise immediate responce, but this log would be very helpful.
Thank you for attention.
Thanks for giving us another choice of rom.
Have you got any screenshots and what overclock are we talking?
Method is described here: http://forum.xda-developers.com/showthread.php?t=1302831
Will make some screens soon.
have you seen Dell released kernel for 2.3.5 on dell open source? this may help with your ROm and bugfixes..
good to see more development.
chrisrotolo, you could've noticed that i've replied in that thread
I think either watch_mania or DJ_Steve will release something big soon.
Right now i'm moving, and gonna be in that state for a month and just don't have time for that. But'd really love to.
Downloading this now.... this coming from fards gs 2.4 so can i keep same amss or the one in op is different ?
Sent from my Dell Streak using XDA App
If your baseband number shows 40514-EU - you can keep your current one.
Is it also possible to disable the battery cover sensor for this ROM? That would complete my wishlist
This could be done. I'll take a look on my free time, if i'll have any
To my knowledge only SimpleStreak has this feature. Would be great if we could get it on more ROMs
NO Internet...
Everything seems to be working great. The OC makes it a little snappier, at least enough to notice it... just having ONE problem though, I don't have any connectivity... I have a wifi signal but it won't connect, it says connected in the settings but I can't browse or connect to anything that needs internet. Same situation with 3G, but with 3G I don't even get the wireless symbol in the status bar..
cdzo72, that's quite odd.
Can you dump and send me or attach here the log?
When Streak is connected to PC, issue this command:
Code:
adb logcat -d >mylog.txt
My e-mail is n0p[at]ukr[dot]net
_n0p_ said:
cdzo72, that's quite odd.
Can you dump and send me or attach here the log?
When Streak is connected to PC, issue this command:
Code:
adb logcat -d >mylog.txt
My e-mail is n0p[at]ukr[dot]net
Click to expand...
Click to collapse
Gimme a couple days... I immediately nandroided back to my install of 2.4... I'll try this one again in a couple of days when I get a couple of hours of spare time...
I tried flashing the amss and dsp1 files for Steve and fards build but it didn't help, and oddly enough when I nandroided back to their build, I had to reboot twice before I could regain connectivitiy... like you said, quite odd
2 days with this Rom and quite satisfied. I have random reboots these seem to occur only After the processor has completed some heavy tasks I.e online flash content. Example I drove 3 hours using sygic navigator and never had a problem then I closed sygic and removed car power adapter checked 2 minutes later the screen was black and had to remove the battery as it didn't turn on anymore.
What I like about this rom is that it is quick and the dell stage removed, the battery's percentage and the phone apk is ok with higher dpi and overall apart the reboots mentioned seems stable enough for day use. Please keep track of the new updates and post them.
Sent from my Dell Streak using XDA App
I would really like to see the log.
Could you connect Streak to PC, issue command:
adb logcat >mylog.txt
and try to reproduce the issue?
adb will automatically disconnect on reboot.
Just to let know that downloads are right now limited to 30KBps/15 sessions.
_n0p_ said:
cdzo72, that's quite odd.
Can you dump and send me or attach here the log?
When Streak is connected to PC, issue this command:
Code:
adb logcat -d >mylog.txt
My e-mail is n0p[at]ukr[dot]net
Click to expand...
Click to collapse
Sorry I didn't get you the logs, it may have been a phone problem... when I nandroided back to my original Gingerbread I couldn't connect either so I flashed the amss and dsp1 and still had no luck.... so I went back to bare stock and started from scratch and now I am able to connect...
BUT have run across another issue, I can update the Superuser app but it won't update the binary... so I manually replaced it and then wasn't able to use any apps that needed root... so I put the old one back, still no root; I had to flash the ROM again to be able to use ROOT apps
_n0p_ said:
cdzo72, that's quite odd.
Can you dump and send me or attach here the log?
When Streak is connected to PC, issue this command:
Code:
adb logcat -d >mylog.txt
My e-mail is n0p[at]ukr[dot]net
Click to expand...
Click to collapse
Still having problems with the wifi and 3g connectivity so here is the log you asked for.. thanks for taking the time..
mylog.txt
cdzo72 said:
Still having problems with the wifi and 3g connectivity so here is the log you asked for.. thanks for taking the time..
mylog.txt
Click to expand...
Click to collapse
What do i clearly see - that's not a log of clean install.
Application permissions are broken, for start.
How did you migrate to this ROM?
--
If you want to upgrade Superuser+su, which i don't recommend, update busybox first and make sure it supports "busybox which" command.
Finally we get CWM Recovery for Dell Strek Pro.
[StreakPro][Recovery][Beta]Clockwork Mod 6.0.1.1
http://forum.xda-developers.com/showthread.php?p=29847686#post29847686
This CWM made by manii
and I am a tester (because SPro launch only in Japan)
I already asked to Cyanogen mod and AOKP.
But Kang said "we don't support dell" and Cyanogen mod no answer
I'm looking for custom rom developers.
Please help me
Regards.
Sent from my GS01 using xda premium
Help
Anyone figured out how to enter into recovery mode of dell GS01?:crying:
hatoo said:
Finally we get CWM Recovery for Dell Strek Pro.
[StreakPro][Recovery][Beta]Clockwork Mod 6.0.1.1
http://forum.xda-developers.com/showthread.php?p=29847686#post29847686
This CWM made by manii
and I am a tester (because SPro launch only in Japan)
I already asked to Cyanogen mod and AOKP.
But Kang said "we don't support dell" and Cyanogen mod no answer
I'm looking for custom rom developers.
Please help me
Regards.
Sent from my GS01 using xda premium
Click to expand...
Click to collapse
It's in the works. CM10.1 compiles just fine, but i'm getting bootloops due lack of ion support in 2.6 kernel. I've managed to (mostly) port spro-specific things to CodeAurora's 3.4 kernel and fixed all compilation errors, but spro's device configuration routine is sort of different from vanilla msm8260 (some things are being configured by aboot, yet it's performing some checks that are unclear to me at the moment). Currently kernel fails to boot and device is getting into the blink-camera's flash-and-switch-screen-off mode (same mode device gets when it's turned on with volume-up+volume-down keys).
Oh, and by the way: i've tried to contact both Compal (odm and actual kernel developer for spro) and Dell to get information about what kernel was used in that unreleased 062-world wide dell rom. Compal's mailserver refused to deliver my message, and Dell's opensource departament people responded only once askung if i seek information on 2.6 kernel. I've re-stated that i'm seeking information on 062 rom and 3.x kernel - no word from them since then
So, we're up to ourselves with this one. If anyone's capable and willing to help with resolving 3.4 kernel boot issues - drop a line into this thread - i'll upload my current kernel tree to github.
---------- Post added at 10:03 PM ---------- Previous post was at 09:59 PM ----------
Anyone figured out how to enter into recovery mode of dell GS01?:crying:
Click to expand...
Click to collapse
Power+volume up+home if i recall it correctly. Another way is to issue
Code:
fastboot boot your-recovery-image-name.img
while in fastboot mode.
For those who it may concern
Here's a list of my SPro-related repos (in order of appearance):
2.6 kernel - original dell sources bumped to .14 along with other additions. should be suitable for ics-based roms.
caf-3.4 kernel - my current point of interest.
device/dell/msm8660-common and device/dell/streakpro - device source trees for cyanogenmod 10.1, both based on htc pyramid device trees.
While I've never had a SPro, good luck with it.
Awesome!
I use GS01 as my main device, so I'm looking forward to your custom ROM!
Sort of update.
Dell responded:
I apologize for the delay. I have learned that we did not update to 3.x. I think you may have the latest versions. Thank you for your inquiry.
Click to expand...
Click to collapse
So, we're on our own. Great..
Request
Trying to figure if androidboot.serialno= is really unique per-device.
I would like to ask StreakPro owners to post output of their device's cat /proc/cmdline output here. Command should be issued as root user, so you'll need to install TheManii's Superuser.zip via cwm.
Thanks in advance.
Is this ok?
kibuuka said:
Trying to figure if androidboot.serialno= is really unique per-device.
I would like to ask StreakPro owners to post output of their device's cat /proc/cmdline output here. Command should be issued as root user, so you'll need to install TheManii's Superuser.zip via cwm.
Thanks in advance.
Click to expand...
Click to collapse
# cat /proc/cmdline
cat /proc/cmdline
console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.emmc=true androi
dboot.hw_id=5 androidboot.serialno=205108 androidboot.baseband=msm
hatoo said:
# cat /proc/cmdline
cat /proc/cmdline
console=ttyHSL0,115200,n8 androidboot.hardware=qcom androidboot.emmc=true androi
dboot.hw_id=5 androidboot.serialno=205108 androidboot.baseband=msm
Click to expand...
Click to collapse
Yep just what I needed, thanks hatoo.
kibuuka said:
Yep just what I needed, thanks hatoo.
Click to expand...
Click to collapse
Hi Kibuuka!
What about DS5 ICS development, are still working on it?
Regards...
Dell steak 5 can't enter fastboot and always restarting somebody help me pls
unlock
Not really the right thread to ask that, but not able to get into fastboot or not able to get into recovery?
Dell Streak Pro GS01 (E mobile)
Kindly requesting for help with my phone mentioned above,
i was looking for methods to root, i ran super one click and got my phone stuck on the E mobile logo,
i cannot find any support on the internet,
am so frustrated
shakes1883 said:
Kindly requesting for help with my phone mentioned above,
i was looking for methods to root, i ran super one click and got my phone stuck on the E mobile logo,
i cannot find any support on the internet,
am so frustrated
Click to expand...
Click to collapse
First of all - as a rule of thumb you're better NOT to use one-click solutions for anything - these ARE evil.
Let's think you don't want to/can't disassemble it.
You'll need:#1 drivers for Spro - grab it here, #2 fastboot and adb binaries - grab these, #3 one of the stock ROMs - TheManii did a great job collecting them - select one containing SPro in filename from here, #4 CWM recovery image - grab this one (courtesy of TheManii) and #5 - superuser flasheable package (by TheManii as well)
You have to wait until phone's battery is fully drained.
After that you need to connect it to pc. It will enter so called "charge-only state" (charging battery animation). Wait until it fully charges (LED will become green). Disconnect it from pc/power supply now.
Then you'll need to turn it on by pushing power button AND volume down at the same time to enter fastboot mode - screen will go black with two lines on it:
Code:
FATBOOT!!!!
Version 0.5
Connect your phone to pc - you'll see third line
Code:
USB cable connected
and windows will ask for drivers for device (if you don't have them installed already)
After drivers installation you're set to fix you problem.
Open command prompt and cd to a dir containing adb and fastboot binaries (let's assume full path is y:\adb\ and you have copied CWM image into this folder):
Code:
cd y:\adb\
Then boot (we don't flash it this time preserving your device's warranty ) into CMW recovery
Code:
fastboot boot y:\adb\SPro-6.0.1.2.img
You'll see good'ol CWM recovery screen. Navigate to "Mounts and storage", then select "mount USB storage". Your pc will now be able to access phone's internal and external storage. Now copy ROM image of choice and superuser package to either of phone's partitions you've connected to pc on previous step.
Select Unmount in CWM menu (AFTER you did a safe device removal in windows - thin precaution will save you some nerves).
Navigate to "install zip from sdcard", then to "choose zip from sdcard", select ROM image you've copied previously, select "Yes - Install update-zip-you-have-selected.zip"
CWM will install ROM image for you.
Now do the same selecting superuser package instead of ROM image and install it as well.
Select "reboot system now". If everything's ok you'll see your device booting into your newly installed ROM. If it doesn't - get to fastboot mode again, boot CMW image and do a factory reset using it ("wipe data/factory reset").
I'll just leave it here
Not creating separate thread for this, just teasing a bit .
http://www.mediafire.com/download/oje1t47k1ght15w/cm_streakpro-ota-3ead3941fd.zip
Summary: cyanogenmod-10.1 for StreakPro
NOT suitable for everyday use as of yet (mediaserver lockup bug is showstopper here), testing purposes only.
prerequisites:
baseband that is newer than 061 to get gsm voice working. (tested using baseband taken from MIL_2.0.12.0)
CWM recovery (to install it )
Working:
Boot
Speaker/wired headset/handset audio
Voice calls
Wifi
adb is enabled by default
3d seem to be working (gfxbench runs just as fine as on 061-World-Wide-Dell ROM)
Sensors (partially, there seem to be a problem with proximity sensor in phone app)
Hardware buttons (+button leds)
Touchscreen
Top LED (behaves differently, green while charging, blinks white on unread sms/email)
Battery stats (consumption measurement values are taken from similar device (htc pyramid) - if someone has access to real values for SPro - please share)
Buggy/not working at all:
Mobile data (known, working on fixing it)
Tethering (haven't touched it yet)
Bluetooth (haven't touched it yet)
UMS (internal/external SD are recognized and accesseable by apps, but pc mounting fails due to Settings segfault)
Camera (halfway there - cameras are being recognized by system/applications but currently we're unable to capture image. i'm working on it)
Mediaserver seem to be locking up boot process 9 times of 10. adb shell killall mediaserver will resume it.
You're encouraged to issue adb shell pm disable com.android.providers.media/com.android.providers.media.MediaScannerReceiver
to make mediascanner stop eating battery and cpu time like crazy.
No video in Youtube app. (haven't touched it yet)
Mute switch (low priority, got several options how to fix it, have to decide which is better)
bug reports aren't really needed, i'm aware of problems current build has and slowly (tbh - very slowly, shortage of spare time) progressing on those.
if someone's able/wishes to help fixing bugs - device tree and kernel are on my github.
kibuuka said:
Not creating separate thread for this, just teasing a bit .
http://www.mediafire.com/download/oje1t47k1ght15w/cm_streakpro-ota-3ead3941fd.zip
Summary: cyanogenmod-10.1 for StreakPro
NOT suitable for everyday use as of yet (mediaserver lockup bug is showstopper here), testing purposes only.
prerequisites:
baseband that is newer than 061 to get gsm voice working. (tested using baseband taken from MIL_2.0.12.0)
CWM recovery (to install it )
Working:
Boot
Speaker/wired headset/handset audio
Voice calls
Wifi
adb is enabled by default
3d seem to be working (gfxbench runs just as fine as on 061-World-Wide-Dell ROM)
Sensors (partially, there seem to be a problem with proximity sensor in phone app)
Hardware buttons (+button leds)
Touchscreen
Top LED (behaves differently, green while charging, blinks white on unread sms/email)
Battery stats (consumption measurement values are taken from similar device (htc pyramid) - if someone has access to real values for SPro - please share)
Buggy/not working at all:
Mobile data (known, working on fixing it)
Tethering (haven't touched it yet)
Bluetooth (haven't touched it yet)
UMS (internal/external SD are recognized and accesseable by apps, but pc mounting fails due to Settings segfault)
Camera (halfway there - cameras are being recognized by system/applications but currently we're unable to capture image. i'm working on it)
Mediaserver seem to be locking up boot process 9 times of 10. adb shell killall mediaserver will resume it.
You're encouraged to issue adb shell pm disable com.android.providers.media/com.android.providers.media.MediaScannerReceiver
to make mediascanner stop eating battery and cpu time like crazy.
No video in Youtube app. (haven't touched it yet)
Mute switch (low priority, got several options how to fix it, have to decide which is better)
bug reports aren't really needed, i'm aware of problems current build has and slowly (tbh - very slowly, shortage of spare time) progressing on those.
if someone's able/wishes to help fixing bugs - device tree and kernel are on my github.
Click to expand...
Click to collapse
WOW! AMAZING! Never expect Streak pro will have CM. Thank you so much for you work.
Finally!!
So nice ROM!!
I love you Kibu lol
Please Support Custom rom dell streak pro
I know many xda dev community is a good: Good:, the dell streak pro help you make a rom version 4.x so it works better : O
thanks!
- CPU: Qualcomm MSM8260A Snapdragon, 1.5 GHz Dual-Core Processor
- RAM: 1 GB Memory: 4 GB
- External Memory MicroSD (T-Flash) up to 32 GB
- Camera: 8.0 MP, support LED flash, autofocus
- Cinematography: FullHD 1080p @ 30fps
- Battery capacity: 1520 mAh
- Super AMOLED Plus display with 16 million colors Resolution giai540 x 960 pixels Size 4.3 inches
- OS: 2.3.5 Androi
are looking forward to the help of kibuuka well as helping people in xda
kibuuka said:
Not creating separate thread for this, just teasing a bit .
Summary: cyanogenmod-10.1 for StreakPro
NOT suitable for everyday use as of yet (mediaserver lockup bug is showstopper here), testing purposes only.
prerequisites:
baseband that is newer than 061 to get gsm voice working. (tested using baseband taken from MIL_2.0.12.0)
CWM recovery (to install it )
Working:
Boot
Speaker/wired headset/handset audio
Voice calls
Wifi
adb is enabled by default
3d seem to be working (gfxbench runs just as fine as on 061-World-Wide-Dell ROM)
Sensors (partially, there seem to be a problem with proximity sensor in phone app)
Hardware buttons (+button leds)
Touchscreen
Top LED (behaves differently, green while charging, blinks white on unread sms/email)
Battery stats (consumption measurement values are taken from similar device (htc pyramid) - if someone has access to real values for SPro - please share)
Buggy/not working at all:
Mobile data (known, working on fixing it)
Tethering (haven't touched it yet)
Bluetooth (haven't touched it yet)
UMS (internal/external SD are recognized and accesseable by apps, but pc mounting fails due to Settings segfault)
Camera (halfway there - cameras are being recognized by system/applications but currently we're unable to capture image. i'm working on it)
Mediaserver seem to be locking up boot process 9 times of 10. adb shell killall mediaserver will resume it.
You're encouraged to issue adb shell pm disable com.android.providers.media/com.android.providers.media.MediaScannerReceiver
to make mediascanner stop eating battery and cpu time like crazy.
No video in Youtube app. (haven't touched it yet)
Mute switch (low priority, got several options how to fix it, have to decide which is better)
bug reports aren't really needed, i'm aware of problems current build has and slowly (tbh - very slowly, shortage of spare time) progressing on those.
if someone's able/wishes to help fixing bugs - device tree and kernel are on my github.
Click to expand...
Click to collapse
hope you help fix bugs present in nodules rom, dell community treak pro users have been waiting for this day ever. thank you very much
DISCLAMER : : This is NOT my work, I am simply passing on the details of this ROM from the ROOTZWIKI site - Original URL - http://rootzwiki.com/topic/207402-rom-gohma-10-772014-android-wear/
Sorry Guys, I forgot about this thread and to update since jumping to The Nexus 6 and new Chromebook pixel , I'll try and keep this fresh and format it better in the following days and colat any tips and trick onto the first page for easy finding !
Click to expand...
Click to collapse
DOWNLOAD - Please find the download link in the rootzwiki original thread [AS ABOVE^^^]
Current build : 2.3
Based on the new OTA (AW 5.0.1)
Features :
Improved battery life
Reduced lag between screens
Improved overall performance
Increased vibration strength and duration
Other surprises!
Change log :
Code:
Changelog
2.3 (md5: 0c98282b30d041a4b331d5b665d41d92)
fixed issue with tweaks script
fixed issue with dpi setting
increased default cpu frequency
enabled 2 cores by default with option to set all 4 in tweaks file
fixed some other minor bugs
2.2 (md5: 57b18d78a33d7807f6138d98acf5b7ce)
fixed issue with tweaks file
improved performance
2.1 (md5: aa21fc8d7c37832d386a76e5eb29c34d)
fixed issue with tweaks not always applying
increased default vibration a bit
minor tweaks to notification vibrations
updated script info again
added more documentation to mods files
2.0 (md5:07036b655722a07a4b9537e88f2bb592)
updated to new 5.0.1 base
updated script info
1.2 (md5: decef7ff62aa8fbfce562e49820c8354)
updated base to KNX01Q (4.4W.2)
re-implemented some tweaks for the new base
added additional custom user tweaks to the mods
1.1 b2 (r2) (md5: 16a7fedb2b9fe6e2ebd9e45ab7bb18e6)
fixed issue causing a long wait on installing mods
no changes were made to the ROM*
1.1 b1 (md5: ef45e6d94efb49c6782f771474d27717)
updated base to KGW42Q (4.4W.1)
improved installer script
1.0 preview 14 (md5: 4c1177574b09ae5aa535bdec43764107)
fixed installer script for Windows XP (no changes to ROM)
1.0 preview 13 (md5: 29be6fc36b2d9b4d79b11fe7e1c1fccb)
fixed issue causing occasional lag
minor tweaks to improve battery life
1.0 preview 12 (md5: c57d9ffcf97b9f09fd6cd4a78f2252f5)
fixed issue with installer
you need to install 12 to get the full features from 11
1.0 preview 11 (md5: 70d026cc52fa1399f2c01d2f8ea76a1a)
updated base to latest OTA (KVM78Y)
added preview build number to about screen
tweaked viewing angle to hopefully improve usefulness
other minor tweaks
return to stock is not fully function from preview 11!
1.0 preview 10 (md5: 39dd89f79b1750cd50b5d94b90b1453f)
fixed leftover files from return to stock script
improved memory management (minfree settings)
other minor tweaks
1.0 preview 9 (md5: 9fac7903d237773435b3b8796e5245cc)
fixed issue with return to stock script, no changes to ROM
1.0 preview 8 (md5: 3214d17ba329efd4db059711d8201c9c)
increased vibration intensity/duration a bit more by request
improved card swiping transitions
improved battery life/performance by improving cpufreq usage
added auto compression of app databases for quicker app loading
fixed issue with installer script throwing false errors
added return to stock script
1.0 preview 7 (md5: 3fc9dcd625a77c33a6cf7f53974205a8)
fixed installer issue with osx, no changes to rom
1.0 preview 6 (md5: ba6fed487012f019ea5dc369aa89826d)
fixed additional issues with installer (really this time, promise)
you will need to run preview 6 to have the full effects from what was listed in preview 4 or 5
1.0 preview 5 (md5: 8f103412fc4261312a5846de9ad69d41)
fixed issues with installer
you will need to run preview 5 to have the full effects from what was listed in preview 4
1.0 preview 4 (md5: 98243f4408c01378297e88dfc0f369e0)
increased vibration duration and intensity a little
improved battery usage from vibration
improved touch responsiveness
tweaks to improve battery life (should be back to being noticeably better than stock)
fixed issue with tweaks not sticking after reboot
fixed issue with installer
1.0 preview 3 (md5: b2080c9240e87aa722a293990c1756fd)
increased the vibration intensity a little
made readme.txt a little more clear and easy to follow
1.0 preview 2 (md5:*00455fe8d829ff96ac8ae0577ce137cd)
fixed issue with the installer
fixed confusion with the readme (yes, I'm very use to saying phone, sorry!)
1.0 preview (md5: d042862dbb117deeba462e7967e60338)
initial preview release
Instructions :
1. Follow instructions in the zip file, do not attempt to flash!
2. Let watch sit for a few minutes once booted to settle (a lot is done on first boot)
If you wish to donate towards this ROM, please follow the link in the rootzwiki thread !
Useful Tools
CWM - http://forum.xda-developers.com/g-watch/development/recovery-clockworkmod-recovery-lg-g-t2833877
TWRP - http://forum.xda-developers.com/g-watch/orig-development/recovery-twrp-2-7-1-0-touch-recovery-t2827887?__utma=248941774.771302273.1407179576.1407179576.1407266415.2&__utmb=248941774.2.10.1407266415&__utmc=248941774&__utmx=-&__utmz=248941774.1407266415.2.2.utmcsr=google|utmccn=(organic)|utmcmd=organic|utmctr=(not%20provided)&__utmv=-&__utmk=234457885
Recovery & Reboot menu - http://forum.xda-developers.com/android-wear/development/wear-reboot-bootloader-recovery-t2838400
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
MORE INFO
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Instructions :
1. Press the watch face untill google now shows up and scroll down to settings.
2. Tap the build number field 7 times to enable developer settings.
3. Back in the settings menu, click developer options and enable USB debugging ( you will need the Paired handset to enable debugging ! )
4. Open up your COMMAND PROMPT in your usual ADB / FASTBOOT directory ( In my case C:/ANDROID-SDK)
5. Type ADB DEVICES and allow debugging on your phone from the prompt screen.
6. ADB REBOOT BOOTLOADER, Then type FASTBOOT OEM UNLOCK.
7. Using the Arrows and the O button in the bootloader, select YES unlock when prompted and press O to enter the selection.
8. Allow your watch to reboot fully and re-enable Developer options and USB debugging.
9. While booted into Android wear, run the Windows Installer Script found in the download and follow the commands in the terminal window.
10. Allow the watch to reboot and re pair with your handset.
11. Run the Installer.bat file from the Zip and follow the instructions
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
I've never really understood custom ROMs although I've flashed more then I've had hot dinners
If you can give better battery life and smoother animations why don't they have that in the standard ROms like the tweaks etc
J
Sent from my D6503 using XDA Free mobile app
Interesting that someone posted my ROM over here on XDA....
You can post to the main thread, but please do not post directly to the downloads.
Can't figure out how to unlock bootloader. Readme says to enable USB debugging in developer options, but there is no USB debugging option, only ADB debugging and debug over bluetooth.
Nevermind: Properly installed SDK crap and it worked.
Edit: Nevermind
Thanks
First of all, thanks for working on the rom and making it better. I did notice less jitter in the animation. However, I didn't notice the vibration being any stronger that was one of the main reason I wanted to test this out. Is it possible for you to make it even stronger, I'm having a hard time feeling it vibrate?
Reduced lag is noticeable immediately.
Thanks!
soundwave809 said:
First of all, thanks for working on the rom and making it better. I did notice less jitter in the animation. However, I didn't notice the vibration being any stronger that was one of the main reason I wanted to test this out. Is it possible for you to make it even stronger, I'm having a hard time feeling it vibrate?
Click to expand...
Click to collapse
Yeah, I'll make it stronger and increase the duration a little as well. Look for an update later today on the original thread.
mhhmmm it trew a SU error on me, it installed fine just no SU found. do you really also need root for this?
Hmm I just tried it and it appears none of the changes are being saved after the watch reboots. It works fine until then and everything is pushed over correctly, but as soon as the watch restarts it deletes all the changes? I don't know what I could have done wrong, no errors came up, I have root and ADB debugging enabled. Any idea @okibi?
For the life of me i cannot get the windows drivers installed. I mean, the installer installs no prolem but when i connect the G Watch, it doesn't get recognized properly by windows.
Any idea what i may be mssing here?
Predtechhacker said:
For the life of me i cannot get the windows drivers installed. I mean, the installer installs no prolem but when i connect the G Watch, it doesn't get recognized properly by windows.
Any idea what i may be mssing here?
Click to expand...
Click to collapse
Click me
Predtechhacker said:
For the life of me i cannot get the windows drivers installed. I mean, the installer installs no prolem but when i connect the G Watch, it doesn't get recognized properly by windows.
Any idea what i may be mssing here?
Click to expand...
Click to collapse
Follow this: http://stackoverflow.com/questions/24583354/adb-doesnt-recognize-samsung-gear-live-or-lg-g-watch
Thanks spiderflash, that for me recognized, but now I've gotten into the bootloader and the unlock command didn't do anything. The watch doesn't change and the command prompt just sits at < waiting for device >
Now I'm lost again, lol
Sent from my SM-G900V using XDA Free mobile app
Predtechhacker said:
Thanks spiderflash, that for me recognized, but now I've gotten into the bootloader and the unlock command didn't do anything. The watch doesn't change and the command prompt just sits at < waiting for device >
Now I'm lost again, lol
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
You have to give permissions for adb on your phone.
Sent from my SM-G900T using XDA Premium 4 mobile app
I did give permissions on the phone and I made sure to check the box that says to remember the device
Sent from my SM-G900V using XDA Free mobile app
Predtechhacker said:
Thanks spiderflash, that for me recognized, but now I've gotten into the bootloader and the unlock command didn't do anything. The watch doesn't change and the command prompt just sits at < waiting for device >
Click to expand...
Click to collapse
Predtechhacker said:
I did give permissions on the phone and I made sure to check the box that says to remember the device
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
nah you're good. now just click the right arrow on the watch and then click the circle. this unlocks the bootloader. you can read it on the screen
see the image for more details. can't show you with a video as my watch is already unlocked..
Ok, I figured it out. There were 2 issues. The first was when the watch booted into the bootloader windows didn't install drivers so I manually installed those. Second problem was I was running the adb console from the folder containing the rom issues of my normal adb folder.
Once I got past those hurdles I managed to get it all finished.
Thanks for all the help guys
Sent from my SM-G900V using XDA Free mobile app
I am not dissapointed.
spiderflash said:
Hmm I just tried it and it appears none of the changes are being saved after the watch reboots. It works fine until then and everything is pushed over correctly, but as soon as the watch restarts it deletes all the changes? I don't know what I could have done wrong, no errors came up, I have root and ADB debugging enabled. Any idea @okibi?
Click to expand...
Click to collapse
This is fixed in the latest releases. Just download the update and run the script again and you'll be golden!
i9100 LineageOS 11.0 - ABANDONED
LineageOS (as well as CM did until December 2016) still maintains the cm11.0 / 4.4.4 sources to keep pace with 'The Android Security Bulletin' (ASB).
https://source.android.com/security/bulletin/index.html.
Patches for CVE security issues are released at least once a month to the Android Open Source Project (AOSP) repository.
Patches for Android 4.4.4 are not provided by ASB anymore.
This means, security wise Android 4.4.4 is formally dead.
Nevertheless there are a few enthusiasts, still backporting security patches from recent Android versions to 4.4.4.
You should know, such backports are no formal ASB security patches.
Therefore the security patch level of this ROM is named: Unofficial Security Backport "December 2019".
Despite of implementing these security patches by the LineageOS team to its own repository https://github.com/LineageOS, LineageOS does not provide cm11 builds anymore.
Since I personally like 4.4.4. more than later versions, I build it myself unofficially and would like to share it.
The build is made from LineageOS "Branch: cm-11.0" PLUS ASB security patches, even if they are not yet approved by LineageOS.
The main goal of this ROM is to provide up to date builds in terms of ASB security patches, not development.
Instructions:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
First time flashing cm11.0 your device, or coming from another ROM
- download the zip
- install a compatible recovery (TWRP 3.1.0, cwm 6.0.5.1 are ok)
- perform a recovery backup of your current ROM
- flash ROM
- wipe data & cache partitions of your device
- optional: install the Google Apps addon package
Code:
Install lineage-11 on i9100 coming from any ROM (long way)
===============================================
0 Downloads [URL="https://androidfilehost.com/?w=files&flid=298277"]AFH folder with all downloads
[/URL]~~~~~~~~~~~
phone USB drivers
"SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
odin
"Odin3 v3.13.1.exe"
Stock-ROM JB
"I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md 5"
Heimdall
"heimdall-suite-1.4.0-win32.zip"
'ROM lineage-11 for i9100'
"lineage-11-20190714-UNOFFICIAL-i9100.zip" or any other lineage-11 ROM
TWRP for i9100
"twrp-3.1.0-0-i9100.img"
NOTE: more recent versions of TWRP won't work in step 3
1 Install Stock-ROM JB
~~~~~~~~~~~~~~~~~~~~~~
Installing Stock-ROM JB shall ensure a clean start.
1.1 PC
install drivers "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
1.2 Phone
* boot to BootLoader (hold: Vol-Down + Home + Power)
* confirm with Vol-Up
* connect to PC
1.3 PC
execute "Odin3 v3.13.1.exe"
* in 'Log' you must see a device
* select checkbox AP
* select file "I9100XWLST_I9100ODDLSE_I9100DDLS9_HOME.tar.md 5"
* Start
* watch progress until success
1.4 Phone
In the highly probable case of a bootloop on 1st start:
* boot to recovery (hold: Vol-Down + Home + Power)
* execute factory reset
* reboot system
Now Stock-ROM JB should be installed and working.
1.5 Phone
for later usage copy "lineage-11-20190714-UNOFFICIAL-i9100.zip" to Download folder
2 Install Heimdall
~~~~~~~~~~~~~~~~~~
2.2 Phone
* boot to BootLoader (hold: Vol-Down + Home + Power)
* confirm with Vol-Up
* connect to PC
2.2 PC
* extract "heimdall-suite-1.4.0-win32.zip" & navigate to the location of 'heimdall.exe'
Remark: use a folder on the PC's HDD, it didn't work for me when using a USB-Drive
* follow 'Driver Installation Instructions' in README.TXT (switches USB driver with zadig.exe)
* check connection to phone via 'heindall.exe detect'
--> must show 'Device detected'
3 Install TWRP & LOS
~~~~~~~~~~~~~~~~~~~~
3.1 PC
* extract 'ROM lineage-11 for i9100'
* copy 'boot.img' to the folder containing 'heimdall.exe'
* copy "twrp-3.1.0-0-i9100.img" to the folder containing 'heimdall.exe'
* open cmd.exe in the folder containing 'heimdall.exe'
* execute "D:\S2\Heimdall\build\bin>heimdall flash --KERNEL boot.img --RECOVERY twrp-3.1.0-0-i9100.img --no-reboot"
* watch progress until 'Releasing device interface...'
3.2 Phone
* pull out the USB cable
* hold the power button until screen is off (> 8s)
* boot to Recovery (hold: Vol-Up + Home + Power)
* goto Wipe
* goto Advanced wipe --> select Dalvik, Cache, System, Data
* swipe to Wipe
* goto TWRP Install
* navigate to Download folder from 1.5
* select "lineage-11-20190714-UNOFFICIAL-i9100.zip"
Remark: Do not install gapps together with ROM, SUW will crash and ROM is not usable.
* swipe to confirm flash
* reboot System
* configure the just installed ROM
* Optional install gapps:
reboot to recovery
install gapps
reboot system
Download:
<< latest 2019/12/24 >> Unofficial Security Backport "December 2019"
AndroidFileHost
older downloads
Included:
LineageOS per 2019-12-24 status merged at LineageOS
LineageOS per 2019-12-24 status open at LineageOS topics asb-2019.12-cm11
Note
The stock browser is removed from this ROM due to severe security issues, which cannot get fixed.
Get a state of art browser (like firefox) from play store instead.
Known Issues:
xposed not supported
1) A fix is provided by Lenny Bard, see instructions at post here.
2) Fix by lee.wp14. See post https://forum.xda-developers.com/showpost.php?p=79618987&postcount=243.
Download: lineage-11-20190609-UNOFFICIAL-i9100-xposedReady.zip
Be aware, these two fixes might break some security patches.
video in browser fix, thanks to TriboDoP:
https://forum.xda-developers.com/showpost.php?p=70266718&postcount=142
gapps
Paddy's found out, that latest gapps may cause trouble.
Fix: open_gapps-arm-4.4-pico-20161006
Credits:
LineageOS
xpduyson - ASB patches
Tim Schumacher - ASB patches + KRACK patches
mse1969 - ASB patches
Android-Andi - security patches
syphyr - security patches
Hi @grzwolf
That's great!
Thank you very much for building kitkit with latest security patches!
Regards
TriboDP
Sent from my ME173X using XDA-Developers Legacy app
Hi @grzwolf,
It may be an old version of Android, but its a new and updated build... thanks for keeping this cm/los 11 up to date and giving us more options....
Thanks, Lister
Nicee
how is battery life?
Thanks for the good work :good:
Just wanted to note that the bugs here are the same as slimsaber ROM bugs.
Highlights:
1- pixelated YouTube videos.
2- no 480p video quality in YouTube videos
3- no Xposed support.
MigoMujahid said:
Thanks for the good work :good:
Just wanted to note that the bugs here are the same as slimsaber ROM bugs.
Highlights:
1- pixelated YouTube videos.
2- no 480p video quality in YouTube videos
3- no Xposed support.
Click to expand...
Click to collapse
3 - Xposed: you may try this: https://forum.xda-developers.com/xposed/xposed-android-4-4-4-t3249895/post72401950#post72401950
This ROM has brought my S2 back to real usability. I have tried many nougat ROMs with varying results but all were so laggy and unresponsive. This is like a breath of fresh air.
cexcells said:
This ROM has brought my S2 back to real usability. I have tried many nougat ROMs with varying results but all were so laggy and unresponsive. This is like a breath of fresh air.
Click to expand...
Click to collapse
Exactly
Older is always better, because the systems in newer android versions use too much ram, and leave you with less than 25% of free ram(in our case), if you went back to cm10 or cm9, your phone will get smoother, the problem is that those versions are so old now and almost unsupported by apps and games of today, so you are forced to upgrade your phone or upgrade your android.
mhl is working? thank you
edit: sorry, I had thought to read based to 4.1.2
I installed the build with TWRP 3.1.0 and works great!
yes, I have tried many new 7.x roms and the s2 becomes very very very slow and laggy (strange because with an old motorola moto g first edition, android 7.x porting are very fast). nowadays the only use for a s2 is that as mediaplayer (kodi, acetream, live stram player etc.) with mhl cable... pity that one is forced to used stock or stock modified rom...
This ROM is really fast and all.
How did you solve the Camera and Gallery problem?
When opening Gallery it needs external storage.
I have repartitioned my S2 as follows:
System 1.5GB
Data 6GB
Internal Storage 6GB
Thx
DragonZeal said:
This ROM is really fast and all.
How did you solve the Camera and Gallery problem?
When opening Gallery it needs external storage.
I have repartitioned my S2 as follows:
System 1.5GB
Data 6GB
Internal Storage 6GB
Thx
Click to expand...
Click to collapse
That's a wide field, surely not a Gordian knot to solve. I don't do anything but occasional cleanups.
mostly too much camera/gallery garbage: --> settings, apps, all, App info, clear data/cache
sometimes too many leftovers from uninstalled apps: requires CAUTION and a root file explorer
could be a corrupted SDcard, which needs a reformatting/replacement
I will give a try right now!
grzwolf said:
That's a wide field, surely not a Gordian knot to solve. I don't do anything but occasional cleanups.
mostly too much camera/gallery garbage: --> settings, apps, all, App info, clear data/cache
sometimes too many leftovers from uninstalled apps: requires CAUTION and a root file explorer
could be a corrupted SDcard, which needs a reformatting/replacement
Click to expand...
Click to collapse
I'm experiencing this on 2 i9100 with different MicroSD Card.
I don't want to root.
This is a problem that came with KitKat.
If somebody knows a fix please let me know.
You said you only used LineageOS repositories. So you did not include TRIM and Isorec in this ROM? Do we need to install a custom Kernel to have these features?
LeBourrin said:
You said you only used LineageOS repositories. So you did not include TRIM and Isorec in this ROM? Do we need to install a custom Kernel to have these features?
Click to expand...
Click to collapse
Hi
LOS 11 has isorec.
I do not remember if it has trim as i am not on kitkat at the moment.
Sent from my ME173X using XDA-Developers Legacy app
TriboDoP said:
Hi
LOS 11 has isorec.
I do not remember if it has trim as i am not on kitkat at the moment.
Sent from my ME173X using XDA-Developers Legacy app
Click to expand...
Click to collapse
Both implemented, check commits in cm11 branch from March 2016:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commits/cm-11.0
IsoRec:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commit/f92a06b7d28586ceac5526d8669dbc44c0df9dab
Trim:
https://github.com/LineageOS/android_kernel_samsung_smdk4412/commit/197f54cdbc99458d07e99d732b72d9e391aa7fc3
Is there a recommended way to play video files on this ROM?
cexcells said:
Is there a recommended way to play video files on this ROM?
Click to expand...
Click to collapse
Why should there be any?
MXplayer or VLC are anyway the only worth alternative I know.
In other news, just a friendly remainder that for as much lineage got up to July patch level, they are still missing the (unavailable) CVE-2017-0671 fix