Related
Dear Community, Dear Experts, Dear Gurus ,
I am hoping for your help. Unfortuntately the Speaker in my HTC TyTn died
and I need to send back the TYTN to the service center in order to get most likely the speaker replaced ( dead ).
Here my isue:
I want to flash the original stock rom, which is:
RUU_Hermes_1.18.257.2_1.18.257.106_1.03.03.10_Qtek_GER_Ship.exe
I have running now and downgraded from WM6 to WM5:
HTC_BOOT HERM200 IPL-1.04 SPL-2.10.Olipro ->>> not OK :-(
ROM HTC German QTEK_102 1.18.257.2 05/30/06 ->>> OK
EXTROM 1.18.257.106 ->>> OK
RadioRom 1.41.00.10 ->>> not OK :-(
Protocol 32.34.7010.01H ->>> OK
OS Build 14955.2.3.0 ->>> OK
AKU 2.3 ->>> OK
The issue is now, how can I restore the original bootloader ? I can only
flash the rom with the RUUWrapper, the result of flashing the original stock
rom is then, that I am still stuck with the modified bootloader and a corrupted
radio rom. Radio Rom was "fixed" by me by flashing the latest version.
If I would try to use the original flasher I would always get an Update Error [260].
So what can I do to resotre the HTC TyTn to its original status, so that the warranty is not voided ... original stock bootloader, radio rom image and so on.
Thanks a lot and hoping for your support, since I am realy lost here.
Sbrani
grab sspl (soft spl) and use that to flash a stock bootloader only.
as far as i know you cannot downgrade the radio due to it being bootloader 0108 variant, but not having a hermes i might be wrong
You can restore the original SPL bootloader by using SSPL but you will not be able to downgrade the Radio as the original has HTC_BOOT 0106.
You have already checked these guys that they haven't released an update?
First of all, thanks a lot for replying, but still the question is, how I can get rid of the HERM200 IPL-1.04 SPL-2.10.Olipro Bootloader. I would need to downgrade once again to the original HTC bootlader 106. As long as I have the other one, I will always end up, with a non working radio rom, since this stone old radio rom is not compatible with the new "IPL-1.04 SPL-2.10" bootlader. Any further Ideas ? Anyway the sspl (soft spl) did the trick and was able to flash orignal rom, but unfortunately with the same result, still not the original bootloader and the radio rom is now again corrupted :-(.
The bootloader hindering you from downgrading to the original radio is not the IPL/SPL combo but instead the built-in bootloader of the radio itself. Read more in the Wiki.
To put back your original SPL loader, use NBHextract to extract the SPL image from the ROM update file you used to downgrade the other bits in your phone, then use NBHgen to create an update file containing only the SPL and then use SSPL for the update.
Hey great support here ! Finally I also managed to restore the original bootloader, which is HERM200 IPL-1.00 HERM200 SPL-1.04. Now I only have to get the original radio rom running. Thanks a lot, seems that I can think now of actually reaching the final goal. I learned a lot. Great community !!!
You're missing the point about the radio. Let me repeat:
You can't install the original radio ROM. You will brick the phone!
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108, but not 0106. Your original radio has 0106, so if you flash it you'll get a NoGSM error and a bricked phone.
about downgrading to WM5
pof said:
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108,
Click to expand...
Click to collapse
Well Pof, abubasim, Couldn’t sbrani downgrade the radio with custom RUU to his own original Rom Radio first?? (almost the official known Radio is 1.38) then following your description. At that time he gone have WM5 Rom and same Radio as original, I just wondering if u can du like this
Don't worry guys I bricked several times now the radio rom . It's just that it is then extra work. I will keep you updated, as soon I have news, for now I can't see anymore those "upgrading" tools. I will try it again tomorrow.
you where able to unbrick because you had HardSPL, but now you have SPL-1.04 which will not allow you to flash unsigned code.
By the way, did anybody have experience with HTC or better to say HTC Serivce Providers. As far as I know I have to send it to Teleservice in Germany. Are they realy checking the installed rom ? Thanks for the info.
Ok, I made it finally, I will post exactly how I did it, maybe it helps someone who will be in the same situation.
Thanks once again, great SUPPORT !!
Sure you'd HELP me!
Hi there,
Hi Sbrani, I'm in the exactly same situation: HTC TYTN (Orange France) without speaker... and needing to go to french HTC support.
I upgraded both ROM and Radio to the latest versions following step by step the tutorial found here and on mr (???) on its website (very well done by the way).
Sbrani, Please could you help me to restore as you did, my factory defaults?
Regards
Fly
Can you give more facts ? Pls look into my first thread and put down the infos. Thx
Guideline: How to downgrade to an original rom
Ok here we go this is how I solved this issue.
First you need to understand the difference between a normal SPL
and the modified SPls, which you can get here:
http://forum.xda-developers.com/showthread.php?t=296722
A standard SPL will not accept any unsigned code !
In case you bricked it already look here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
1. you need to figure out, which radio rom matches your rom you want to flash, otherwise you end up with a bricked radio rom or even totally bricked,
if you have a standard SPL.
2.Please check it here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
for the roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
for the radio roms
3.Looking at my ROM, which I needed I flashed 1.10 - Olipro SPL - based on 1.04,
I flashed it by using SSPL.
4.I flashed then the needed the radio rom
which was Radio upgrade only using CustomRUU 4.3 V 1.38.30.10
5.I used then Custom RUU Updater flashing the needed rom,
but without the included radio rom.
Costum RUU Updater you can find here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU
extracting and modifying is explained here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
actually it is an how to downgrade from WM6 to WM6.
Please have a close look on how to extract the rom and how to create a
costum rom, which will fit your needs. The self made rom,
should then include the original IPL and SPL loader.
I finally used again SSPL to flash the self cooked rom.
Sorry if the guide is not very precise or not correct at all !!
Everybody is welcome to correct me and to finetune this guide.
LAST BUT NOT LEAST, please read the HERMES WIKI, it was a great help for me !!
Thank you!
You deserve a Very Very Warm thank you!
I'll try all you advised me this week-end.
Regards,
FlY
it's very good already. i think you should get it incorporated into MrVanx's guide as a downgrade for servicing section
Thanks for your guide sbrani, I have not had to downgrade yet, but it something that is in the back of my mind as I know it will be very difficult if I ever need to.
I would also second the comment that I would be very grateful to MrVanx if he wrote a general guide on how to return to factory condition , as it is much more involved than upgrading. It's one thing to flash a phone, a totally different thing to customise a ROM update in order to only flash a specified portion.
@sbrani:
What version is your radio ROM at now? 1.03.03.10 or 1.38.30.10?
hi guys..i have a qtek 9100 g4 unlocked by hard spl...can you tell me what means downgrade before upgrade and how can i do it because wm5 contains ipl/spl?daca imi poate explica cineva in romaneste ar fii perfect /thanks !
This downgrade means reverting to your stock ROM. You stock ROM can be flashed to your device. (However you should remove HardSPL first because I don't know if it will cause RUU to treat your device as a G3).
However if this is your first time of HardSPL and you are already using stock ROM (i.e. never flashed), you can go ahead to flash WM6.
sorry...misunderstanding
starkwong said:
This downgrade means reverting to your stock ROM. You stock ROM can be flashed to your device. (However you should remove HardSPL first because I don't know if it will cause RUU to treat your device as a G3).
However if this is your first time of HardSPL and you are already using stock ROM (i.e. never flashed), you can go ahead to flash WM6.
Click to expand...
Click to collapse
1.i already patched with hard spl and i have a wm6 rom but before change wm6 roms i must downgrade to wm5 but i don`t know what is my old wm5rom and i suppose(but not sure)it was in german language so if i want to remove hard spl i must know for sure my old rom or there is another way to do that?
2.i don`t understand why i must downgrade everytime before upgrade to a new rom ,so if you enlight me i will thank you very much.
3.do you think the hard spl solution for ``unlocking``g4 wizards will brick my device?
....regards..
I want to back to the original rom too but im not sure i have already a cid unlocked g4 o2 mini s but the strange thing its when im in device info it says its wizard100 but im sure its a g4 so thats matters? thanks for your help.
so its there a problem if i go back to original o2minis iplspl or i have problems because in my device is wiz100 at the back of the battery said it is wiz200 what can i do please help.
hey i use the nike with the german o2 rom. unfortunately the device keeps freezing and runs slow. is there an original german htc rom around i can install? do i need to upgrade spl / CID lock? if so, can i reverse it, i dont want to loose warranty! what about installing cooked rom? can i somehow reverse everything so i still get warranty?
netrunnerat.4shared.com
all you need and more! you need hardspl!
Sorry for anoob question.
My phone Vendor is Asia.
Is it possible to completly change VENDOR to WWE???
yes HSPL2...
samsamuel said:
yes HSPL2...
Click to expand...
Click to collapse
Yes I know... But question is to change and make it like another stock VENDER.
I mean i have Asya VENDER and i wanna to make it WWE VENDER, just like if it was from stock.
Is it possible?
yes it is. flash hspl2, choose 1.66.hspl or 2.08.hspl, flash any ANY rom, from ANY vendor, example O2 WWE, or Vodaphone WWE, or T Mobile Germany, or Eastern Europe, or Simplified chinese, or t mobile usa, or HTC WWE, or cooked roms, anything you like.
This WILL NOT let you use any sim if your phone is locked.
Just remember to flash using USB and not sd card.
Dear Sir Samuel.
I understand what you mean. But maybe you not understand me... Sorry about my english...
I'll try to explain what i'm talking about.
The question is ONLY about flashing stock ROMs, not customs.
I understand that with HSPL i can flash everything but...
When we install some ROM, it checks vender id which is flashed somewere in the devise, and if flashing ROM is WWE and devise has asian ID there we have error.
Question is, is it possible to change VENDER ID, in the devise, i mean just like it was putted in trhe devise from factory.
All i need it to flash now and future stock WWE ROMs.
Question is because if it was be possible, i will upgrade my 1.66 phone with 3.14 WWE as i like and not with Asian 3.14.
It is important, because every next ROM meybe come with newer SPL version, and i need to have devise wich accepts completly official updates.
In one word i need to change the citizenship of my devise
Sorry about my english, and to many words.
Thank you
have you tried? because as far as I am aware, hspl bypasses vendor ID.
BUT, you will not be able to use hspl to instal the 3.14 rom, because it doesn't work properly with hspl, so you can't get to spl 3.x
If your question is 'other than hspl, is there a way to change the vendor ID', , , you could try a goldcard, but if it goes wrong you may be stuck with an spl 3.x. (Though flashing your original stock from sd card should fix it, , bit of a risk though, i have a goldcard but im not trying it till hspl3.03 comes out.)
samsamuel said:
... because as far as I am aware, hspl bypasses vendor ID.
Click to expand...
Click to collapse
There we are. I don't need bypass Vendor ID, I know that is possible.
But i just wanna change my Vendor ID with another one.
Once to forever. I dont need custom ROM-s
I just wanna to any next official WWE ROM, when installing "thinks" that devise is WWE.
May be i don't understand what is VENDOR ID or where is flashed/recorded on the devise... May be VENDOR ID is serial number of some microchip and we cant reflash it... I dont know.
OK
Just forget about flashing ROM-s...
Can you tell me, where in the devise, Vendor ID is recorded?
From where, ROM installer asks devise for it?
And can we change this ID on the devise?
sounds to me like you need an electronics engineer.
samsamuel said:
sounds to me like you need an electronics engineer.
Click to expand...
Click to collapse
Yes Sir.
I also think so
ps
Everything just because f**king Amazon!!!
The item description was "International version", but devise come to me with Malaysian ROM.
jabana said:
The item description was "International version", but devise come to me with Malaysian ROM.
Click to expand...
Click to collapse
i really don't see your problem, just accept you will need to hspl and move on.
hspl
flash chosen rom any language any region,
problem gone.
samsamuel said:
i really don't see your problem, just accept you will need to hspl and move on.
hspl
flash chosen rom any language any region,
problem gone.
Click to expand...
Click to collapse
My problem is 3.03 spl...
Thank you Sir.
ah i get you, you want to flash a 3.14 rom, but they doint work correctly because you don't have the 3.03 spl. I see.
In that case, the answer is to wait, i guess. Regional 3.14 roms are being released, so there will be one for your area soon, meaning you can get the 3.03 spl, and then use sspl to flash the wwe 3.14, perhaps.
In the meantime, cross your fingers that someone is working on hspl3.03
You could also use SSPL to flash to a new 3.14 ROM.
Remember when flashing with SSPL, SPL and radio aren't flashed...
So you would only get the new rom (not SPL 3.03 and the new radio)
Grtz,
Degake
Hi everybody,
i get a problem when i tried to flash my second HD2, flashed the first one without problems
i searched for spl 3.03 and i found other threads saying that we have to flash with stock ROM but the serial number doesn't match with the mskip list...
S/N is : HT01KNW03882 is there anyone who can tell me it 's from where ?
i bought it to a guy who get it with a contract it's under Orange french ROM and i'm in france so i get this french ROM:Leo_HTC_FRA_1.43.406.2_Radio_Signed_15.26.50.07U_2.04.50.22_2
but i get this message error during a sd card method (card was formatted in FAT32), after showing me the bootloader screen, in the grey back :00028002
Not allow
and then it returns in the tri color screen
sorry for the bad english and thanks in advance
Hello sir, honestly it isn't complicated.
You mention that it is a device who came from a contract under Orange.
So it is a Orange branded device.
So conclusion; you need this ROM: RUU_Leo_S_Orange_FR-B2B_3.14.73.2 Download!
And for your info; I have verified it with your S/N
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
abdelQouddouss said:
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
Click to expand...
Click to collapse
Mate, Im confused..
You said you have that rom installed/flashed but didnt change the SPL?
As I know, the stock rom version 3.14 contains SPL 3.03.0000. So, your hd2 should have had that spl now.
Try to check again in case you missed something.
Also please keep in mind that SPL 3.03.0000 are not compatible with HSPL at the moment. It will cause you trouble if you install HSPL over SPL 3.03
Cheers
silverwind said:
Mate, Im confused..
You said you have that rom installed/flashed but didnt change the SPL?
As I know, the stock rom version 3.14 contains SPL 3.03.0000. So, your hd2 should have had that spl now.
Try to check again in case you missed something.
Also please keep in mind that SPL 3.03.0000 are not compatible with HSPL at the moment. It will cause you trouble if you install HSPL over SPL 3.03
Cheers
Click to expand...
Click to collapse
that's the ROM i had when i get the phone and the only one i can get via HTC and the spl was only 3.03.0000 and do not change with flashing this ROM
now i have 1.43.french ROM and still this $&!ù^* 3.03.000 spl
ok i have successfully flashed the device with darkstone SuperRAM FroYo v1.5 using jayceooi's video because i saw the spl 3.03 in it
abdelQouddouss said:
thanks for reply !
this is the ROM i had already and the only one i can get from HTC whith the S/N you'r right but i tried that and it do not change spl
i just flashed it now with SSPL and a 1.43 french stock ROM but i just want HSPL on it
Click to expand...
Click to collapse
First of all I'm confused, If you already have this ROM; way your question about that you card find your stock ROM based on your S/N???
And secondly, way would you install stock ROM over SSPL??? Just use the normal installation proses. But in case you have HSPL on your device, remove it first. (HSPL isn't compatible with stock ROM 3.14)
was afraid when i saw that no S/N was like mine and i want HSPL because it's easy and i use it since Trinity without any probs.
flashed with SSPL because i really don't like Orange's ROM
If i understand correctly, you flashed with sspl and can't go back to hspl even after going back to stock rom. Its very easy to solve but difficult to find the required rom. All you have to do is download different kinds or should i say download an older version of the orange stock rom and install it on your device. That should solve your proplem, at least that how i was able to solve mine.
Abdul9. said:
an older version of the orange stock rom and install it on your device.
Click to expand...
Click to collapse
hehe, and that little piece of info is the cause of confisuion this mildly amusing thread,, , you see the only orange rom that has been released by HTC directly is the 3.14, (there is an earlier orange FR rom about, but i remember lots of people hunting high and low last summer for it) but the OP wants to downgrade to apply hspl.
@OP - give the one in post 2 a try HERE.