Hey Folks,
I know this question has been around several times, but I already tried searching most threads that were listed with wlan problems: none seems to solve my problem. Most threads deal with router settings and problems with pairing devices with special routers.
However, my problem seems to be more basic: I cannot find wireless lan networks, no matter how insecure (or secure) they are. They simply are not even listed in my device. Not on windows 6.5 (duttys) nor on the most recent Stock rom and neither on android (mdeejay rev. 1.6).
I heard it might be an issue with the radio rom. Currently I use the latest Radio rom 2.15.50.14. My device has HSPL version is (2.08 - afaik).
For your information, what happend: my HD2 was broken after a bike acciddent and I sent it in for repair. After getting my motherboard replaced, I was no longer able to find any wireless lan. So I flashed the 2.15 radiorom (non-tmous). After the fist boot, I saw my wirelesslan at home appear only one glance, then disappearing for good (just flashing for 1 or 2 seconds in the wlan list of winmo 6.5). From then, all my efforts to connect to any wirelesslan were in vain. I cannot find any wireless lan. Trying to add a SSID manually, does not work.
Is there anyone with the same problem, does anyone have clous on how to fix this issue? I appreciate your help. Thanks in advance,
jokeR.
Hey guys, i just fixed the device.
So for others having the same problem my solution:
Obviously the wirelesslan antenna was not connected to the motherboard after I had recieved it from the motherboard replacement.
I had to open my HD2 and ended up like the picture below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On the left side you can see the motherboard/camera/screen-device. Locate the camera. Right to the Camera there is a black cable that is connected from the platine where the camera sits to the motherboard on the lower part of the device with a simple snap.
That cable hang loose on my device, after connecting it to the motherboard, my wirelesslan works properly no matter what radio rom was used.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
(Download starts after 15 seconds)
Click on image to go to the Download at PPCFreaks.de! This ROM is also User Customizable, an HowTo is inside of the RAR archive!
excellent work as always animelover,thx for the german ROMs
hi, there!
did you modify this rom in any way? or did you just translate it?
i am curious because korand's roms always have this strange comm manager behaviour with wifi meaning that after each soft reset wifi only starts after two taps on the button in the comm manager, whereas wifi starts right away when enabled through batterystatus. i also tried different comm manager versions without an effect.
any comments? any ideas?
cheers.
That can be changed by putting a shortcut to "WiFiInit" in the start up folder.
nice! thanks!
tried it and seems to work. funnily enough, i do not need this shortcut in my official wm5 for wifi to work right away...
remains one question unsolved though: how to set the sound scheme to the original wm 6/6.1 as it is available in cloudyfa's and pdaviet's roms? i would use them if they were not that much overloaded with apps i do not like or need, espacially all the htc crap... apart from those minor flaws mentioned above, i really like korand's slim and sleek roms.
but when i read earlier that cloudyfa is coming up with a new one including wpa2, i might give THAT one a shot...
cheerio!
thanks for this release. just installed and seems to work very good.
Do this ROM have problem to stop playing music in WMP, in stand by mode?
I haven't test it. Maybe some report.
If yes. Use this cab to fixed it.
WMP and Audio Manager fixed.
Hey Guys,
I am using a Samsung Galaxy S2 I-9100 Carrier T-Mobile Hungary; though this started back when I was using AT&T from the US
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am having the problem very similar to this post: http://forum.xda-developers.com/showthread.php?t=1317916&highlight=USB+does+-work
Though the poster has abandoned the question so I thought it wise to repost.
What I have seen:
When Plugging my device into any computer using any USB cable the result is the same.
If on - nothing happens; no notice on the PC and no charge on the phone. I have tried with debugging on/off, I have tried USB Mass storage mode no difference.
If off - It will turn on the phone and then the phone will show charging state though it will lose a charge and the PC will not say a device was plugged in. Also if phone is unplugged after it is on it will continue to say it is charging until a reboot.
If in Recovery Mode - Mounting any form of drive is not seen by the computer.
If in Download Mode - Device will say charging and drivers will attempt to install on the computer and I will see an unaccessible folder in "computer" that says "samsung i-9100"
I have just checked the web for updates and it says none found. To my limited understanding I am using a Stock ROM with an edited Kernel to give me root access.
I performed the update of the Kernel identically on both my and my fathers Identical phones and his has not had any problems. The only difference between the two is He is still on AT&T US; While I have moved to Hungary. But as I said the problem existed before that
If there is ANYTHING I can gather or forgot to submit that may offer some light to my problem please let me know.
Thank-You Very much for reading.
Regards,
Joshua Puckett
Fixed - I was using the cable that came with my Storm 2 BlackBerry; and tried after that a Cable I had bought at Radio Shack.
Once I tried the original Sammy cable it all worked;
Thanks to those who looked!
I've bought this Coolpad 7295 phone for less than three days from China.
It seems that I couldn't flash my phone back to the state where I could get the service for calling the first day.
After the second rom flashing with my flash tool. I kind of formated the Yl-parames and NVRAM section of the phone.
I don't know these two mean! Could someone explain how they work? Are they related to the hardware or the motherboard of the phone?
After the wrong formatting action, my phone could not make any calls. (But everything works, and network works also. And later I flashed many roms, all of them work, just no signal)
So the third picture shows that this device has a different partition compared to the most smartphones in the hardware called "YL-parames".
My friend who is good at making custom roms in Taiwan said I might accidentally screw up with the hardware partition.
I just want to know with this problem appearing, is there any other way that I could get my signal back?
I've tried several methods like rewriting IMEIs, reinstalling the official roms, but none of them work.
Or should I just send it back to the dealer to get it fixed? (I'm doing it right now...)
Just want to know in case the phone is back, how should I operate this flashing tool because I'm really a tech-savy
1) The first picture represents what i chose for the outcome of no signals later on.
2) The next one is its interface
3) The next one is the official flashing tool, but I still can not flash the CPB provided by the official since my hardware seems to be broken.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would really like somebody to develop the custom rom in the English version for this device, this device is pretty good!
Or is there anybody using this phone as well? It's nice to have someone to exchange info with!!
Hi!
I have a problem with my S2.
So, yesterday, I tried to tether through USB and I saw it was't working and I said I'd change the ROM and it will work. I changed 3 ROMs and realised that USB wasn't working (neither in ROM or recovery) An hour ago, I tried connecting it to Odin and after 5 minutes, I succeded in Odin recognising it and I started flashing official software, but phone randomly disconnected. Now, if I try to connect it, I can't and the phone does not boot and does not enter recovery. What can I do?
PS: Sorry for bad english.
PS2: Tried connecting phone to 3 Windows 7 PCs and a Mac and it wasn't recognised at all.
worn out?
I'm not sure but I think the contact/connecter is worn out... I have a similar problem with random disconnects mainly when charging the phone but also sometimes with usb-pc connections. Changing to newer cables helps a bit but not entirely...
If it is not rom related I don't know what you can do more then trying another usb cable or buying a new phone. I guess that's not an option?
You also said your phone does not boot and you can't enter recovery... But what about "download mode"? As long as you can enter download mode you can fix the software in your phone but to do that you need the usb to be working correctly with no disconnects or else odin will mess up every time!
Replace USB board. Has been discussed here many times over the past month or so; search for those threads.
The USB port seems to be the weak point of the S2. It is seemingly the most replaced part for this phone.....I have had to do it myself, and have helped others in a similar situation. If you search my topics, you'll find one called 'video tutorial' which shows a step by step process for 'tearing down' an S2. This will help if you decide to replace the board yourself. Online shopping sites are a good place to source the part you need. But be advised, there are THREE different versions of this part (REV2.2, REV2.3 and REV2.4) see the photo below to find out where to look for the version number....
Make sure you get the same version as you remove, as a mismatch at this point is likely to cause other problems. ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally....do not attempt to recover your phone until you have replaced this part.......the chances are that you will make things worse.....to the extent that your phone *may* become unrecoverable......
Sent from my GT-I9100 using xda app-developers app
Thanks a lot for the answers. I just had to clean it, and it's working perfecly now.
Hello guys.
A few weeks ago i started having problems with my redmi's wifi. Without doing any kind of update or change any settings, the wifi and even the Bluetooth would go down frequently and as time passed this only got worse. Eventually, after a reboot, i couldn't turn the wifi on as showed in the image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've tried doing a system update, i'm using Lineage OS 14.1, and i tought that it was working again since i was able to toggle the wifi on and connect to a network. But after a few minutes it went down again. Since then i've tried to flash other roms, even the original MIUI and the problem persists. After flashing or even after an occasional reboot, i'm able to turn on and connect to a network but as always it stops working. With Bluetooth i also have a few problems, like having to forget a paired device and reboot to pair the device again. Since with a clean flash or 1 out of 10 reboots the wifi kind of works, i'm hoping that this isn't a hardware problem.
I've tried to search the internet for a solution, but almost every time that i find something with redmi 3, it's basically redmi note 3 posts/threads. Does anyone had a similar problem or have any ideia how to fix this?
Thanks in advance.
FYI phone status:
I met the same problem, hope someone knows how to fix it.
Same problem with my brother's phone, he was on miui and started getting that "MAC 02:00:00:00:00:00" on wifi
I'm trying to recover it, if it's software related then it is due to the NVRAM partition, accessed with QPTS, but that's strange because mobile network works without any issue.
I dumped my nvram and i'm trying to find the actual mac address, if i'm able to change it and successfully recover it i'll post something. The bad news is that i need a clean nvram to double check, because mine is already damaged. I may get my hands on another working redmi 3 soon, hope that will help
You need a nvram partition backup? is valid a backup of twrp? My redmi 3 is working perfect.