[Q] Obsidian V4.2 w/ Universal LagFix flashed on Vibrant - Vibrant Q&A, Help & Troubleshooting

As the title has stated, I have flashed my Samsung Vibrant with Team Whiskey's Obsidian V4.2 - Android 2.2 w/ Universal LagFix Kernel
It works fine except for one thing...When I try to install an application from the Market, It says there is not any available space on the phone. When I look at my SD card under Settings, I have 13.03 GB of space but under Application Storage, the available space is 0.00B!
I do not know how to fix this and I have the 2GB SD with Avatar on it but I do not know how to fix the problem of installing applications on my Samsung Vibrant!!
PLEASE HELP!!!

This is a fairly common problem with this rom. If your familiar with odin you can use it to flash back to stock, then you can reflash obsidian.

So you think it's the ROM itself and not the flashing process? This was my first time flashing my device or any device for that matter.
How exactly do I flash back to the old ROM?
Where do I find the file to the old ROM?
Where can I get ODIN?
What version, if any, do I need for the Vibrant?

Check the android dev section, there is a stickie called the vibrant bible. There are instructions in there for using odin. It seems daunting at first, but take your time and read, read, read. Also look up a fellow user named moonfire, he has all the info in his signature.
Sent from my SGH-T959 using XDA App

just reboot ur phone

Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions later in my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. You should be in dl mode.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download mode.
Once in download mode
Download the files in the linked thread and follow the directions there or the ones below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Also, you might have to build the usb jig. It is guaranteed to get you into download mode. Here is a link to that thread:
http://forum.xda-developers.com/showthread.php?t=819551
Also, if you would like I can use remote log in to your computer and do it for you. Send me a pm or email: [email protected]

They posted a fix for this
Sent from my SGH-T959 using XDA App

and when people say flash to stock. they mean the JFD rom.

Related

stuck on system recovery after using odin..ok button not working

i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode

22 to 21 backup bricked. help!

Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Hit refresh packages again. Sometimes it takes more than one time.
Same thing happened to me, I ended up using odin....again. Thank god for odin
Sent from my SGH-T959 using XDA App
nick1217 said:
Okay so I went from onyx 4.2 to a nandroid backup of bionix findal. Then since the backup was a 2.1 rom I flashed a 21 kernel then I rebooted and its stays at the vibrant screen and keeps going into recovery when I hit reinstal packages it takes me back to stock recovery not Cwm. So what do I do from here
Click to expand...
Click to collapse
If you cannot get into CWM recovery, than most likely you will have to Odin. If you know how to use adb, then adb the CWM update.zip onto /sdcard and select re-install packages from the normal recovery. If you don't know how to use adb, then you can either learn or follow the directions in this post on how to use Odin. You might want to learn Odin anyways as it is extremely useful if you softbrick without access to recovery.
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions at the end of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. Hopefully it will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
Download the files in the linked thread and follow the directions there or the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
hockeyrcks you arE the man, thanks so much. worked great
nick1217 said:
hockeyrcks you arE the man, thanks so much. worked great
Click to expand...
Click to collapse
Glad I could help you out. Just make sure you keep all the files on your computer in case you have to do it again. I had never had to use Odin until recently. Then I had to use it three times in one day.

[FIXED!] Bricked Hardware locked Vibrant. Advice needed.

I have a hardware locked vibrant, but with I've been getting by with adb to get into recovery to root and install CWM and ROMS.
Recently my phone got interrupted while doing an Odin restore and now i've bricked my phone. I get the "Phone ! PC" screen everytime I power up.
I can't use adb orCWM to boot into download mode, and my phone has never responded to any combination of buttons on start-up to get it there. What else could I do?
I heard this is considered a defect, if it is hopeless to fix should I try to return it to t-mobile even though it's bricked? or just report it lost?
EDIT: FIXED!
Thanks Beniuec for pointing me to the JIG
http://forum.xda-developers.com/showthread.php?t=819551
I went to radio shack, picked up some resistors, and it worked like a charm!
I have a very similar problem. My phone got stuck on the Vibrant boot screen after trying to flash a rom. I can't get my phone into download mode so that I can use ODIN. All it does it stay stuck on the Vibrant Boot screen. Can't start the phone, can't get into recovery. If anybody can help us, that would be great. I do hear that most phones should be able to get into recovery mode if not then we should return it. My problem is that I bought my phone on eBay. I can't return it to T-Mobile.
If you can get into the vibrant boot screen you may be able to use ADB to reboot into download mode.
connect to your PC and go to the command prompt where you have adb installed
Code:
abd devices
Code:
adb reboot download
It doesn't recognize my device. Under list of devices, it is blank.
You might have to make this or post if anyone in your area has made one since nothing else works for you good luck
homemade test jig
http://forum.xda-developers.com/showthread.php?t=819551
Sent from my SGH-T959 using XDA App
Oooh =/ That happened to me.
But I got it fixed
IDK if this will work w/ hardware locked (nor do i even know what hardware locked is):
What I did was power off the phone, charged it, you should see a battery appear. When that happens, then press power, vol up, vol down, hold those button.
AS SOON AS THE SCREEN TURNS BLACK, release power, and it should get you into DL mode, then you may unplug, then odin, then restore it
GL
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions later in my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. You should be in dl mode.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download mode.
Once in download mode
Download the files in the linked thread and follow the directions there or the ones below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Also, you might have to build the usb jig. It is guaranteed to get you into download mode. Here is a link to that thread:
http://forum.xda-developers.com/showthread.php?t=819551
Since you're hardware-locked, your only choice is the usb jig or returning the phone (If you got it from T-Mobile, they may replace on grounds of faulty hardware, like they did for my first Vibrant). Seems like the jig is the easiest option, so long as you or someone you know can solder the thing, and it is pretty much guaranteed to work.
Beniuec said:
You might have to make this or post if anyone in your area has made one since nothing else works for you good luck
homemade test jig
http://forum.xda-developers.com/showthread.php?t=819551
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for, I could easily make this jig as I have plenty of experience soldering. I'll try this out and report back the results!
Good luck let me know how it works send me a pm incase I lose the thread
Sent from my SGH-T959 using XDA App

[Q] Fixing a Vibrant that won't boot fully

After flashing Macnut R12 and Eugene's a13 kernel, my Vibrant will only boot to the "Galaxy S I9000" screen, but nothing further. The screen doesn't go black and no buttons flash, the phone just doesn't boot past that screen. I can enter recovery and download mode, and can use clockwork mod recovery, but I'm not sure what my next steps should be. Should I attempt to use Odin (Bricked my first Vibrant with that, though that one was HW-Locked), or is there some other way to fix this?
Scratch that, now my Vibrant boot-loops (Boots to galaxy S I9000 screen then restarts), and I can't enter recovery. Starting to freak out a bit, hoping download mode works... Any help would be appreciated.
Generic112 said:
Scratch that, now my Vibrant boot-loops (Boots to galaxy S I9000 screen then restarts), and I can't enter recovery. Starting to freak out a bit, hoping download mode works... Any help would be appreciated.
Click to expand...
Click to collapse
Gmail me [email protected]
Sent from my SGH-T959 using XDA App
Here is a couple of methods to get into download mode. Once you get to download mode, follow the directions later in my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on, immediately release the power button but not the other two. You should be in dl mode.
Second Method
1) Another method that seems to work for some people is to pull the battery, sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep holding all 3 buttons until the vibrant disappears and reappears. Once it reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download mode.
Once in download mode
Download the files in the linked thread and follow the directions there or the ones below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected. If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Also, you might have to build the usb jig. It is guaranteed to get you into download mode. Here is a link to that thread:
http://forum.xda-developers.com/showthread.php?t=819551
Also, if you would like I can use remote log in to your computer and do it for you. Send me a pm or email: [email protected]
Ok, Download mode (Via Volume + and - and plugging in usb) works flawlessly, but I'm still unsure of how to go about using Odin to fix this problem. Should I go the "Froyo that doesn't brick" downgrading route, or should I just flash JFD? And to the above poster, I won't have access to the internet for a couple hours after this post, so I can't email you right away. If I can't fix the problem later today, I will certainly contact you for some assistance.
Thanks for the guide, I'm just worried about what to flash. I've seen people praise Eugene's downgrading method for fixing most any problem (Froyo that doesn't brick to JFD), but I'm very much an Odin novice, and I'd hate to let it tear the life out of yet another phone (Though thankfully this one isn't HW-Locked). Also, does flashing JFD through Odin touch the SBL or anything that could affect my phone's ability to access recovery/download mode through hardware methods? I've heard that the JI6 OTA update fixes the 3-Button mode, but I'm unsure of whether or not JFD breaks that (Though I assume it doesn't). Anyway, thanks for the help, sorry if I don't post back soon, have to leave the house for a few hours, and I'm stuck with my old phone until I can fix my Vibrant.
One last question, should I use the Odin in the link, or an updated version (If one exists, I believe Odin3 1.70 is the latest and I don't know used in that thread)? Last time I used Odin it froze and killed my HW-Locked Vibrant.
Generic112 said:
Thanks for the guide, I'm just worried about what to flash. I've seen people praise Eugene's downgrading method for fixing most any problem (Froyo that doesn't brick to JFD), but I'm very much an Odin novice, and I'd hate to let it tear the life out of yet another phone (Though thankfully this one isn't HW-Locked). Also, does flashing JFD through Odin touch the SBL or anything that could affect my phone's ability to access recovery/download mode through hardware methods? I've heard that the JI6 OTA update fixes the 3-Button mode, but I'm unsure of whether or not JFD breaks that (Though I assume it doesn't). Anyway, thanks for the help, sorry if I don't post back soon, have to leave the house for a few hours, and I'm stuck with my old phone until I can fix my Vibrant.
One last question, should I use the Odin in the link, or an updated version (If one exists, I believe Odin3 1.70 is the latest and I don't know used in that thread)? Last time I used Odin it froze and killed my HW-Locked Vibrant.
Click to expand...
Click to collapse
Thank you for pointing out that the linked thread has the old Odin. I attached the new Odin 1.7 in this post. The other files (pit and pda) in that thread will work fine. Once you get booted into that ROM (Stock JFD) just re-root, install CWM recovery and reflash with a ROM of your choice.
Just wanted to say that Odin ran successfully for me, and I now have my Vibrant back in working order. Thanks for the help (and that nifty little guide).
Generic112 said:
Just wanted to say that Odin ran successfully for me, and I now have my Vibrant back in working order. Thanks for the help (and that nifty little guide).
Click to expand...
Click to collapse
You are welcome. Glad you got it working again...

Samsung Fascinate Root and ICS

Hey, Ive been wanting to get ICS on my Verizon Samsung Fascinate, I'm just really confused and what i need to do to get it on my phone after rooting. I want to use CM7 but i dont know which to use (Nightly/Stable).
All from bhfd64 on the Galaxy Forums
[HOW TO] Root Froyo or Gingerbread on Your Fascinate
Below you'll find the steps to attain root access on your Samsung Fascinate, but keep in mind that along with risking damage to your phone, you'll be voiding your warranty. This guide assumes you've taken the most recent OTA update and are running official Gingerbread. The responsibility for any damage incurred by following this guide is yours and yours alone.
NOTE 1: These instructions are for PC only. They will not work for Mac users.
NOTE 2: These instructions should work for any stock Gingerbread build on the Fascinate.
Downloads:
Download Samsung drivers from HERE.
Download Odin (computer program) from HERE.
Download ClockworkMod Recovery from HERE (place this file somewhere on your computer where you can easily locate it).
Download "su-2.3.6.1.x.zip" file from HERE (place this file on the root of your sdcard...not within any folders).
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs on your computer and/or phone for this to work properly.)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord that came with your phone into a powered USB port on your computer (usually on the back of the computer).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. (Let go of the volume button at this point.) You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Click the PDA button in Odin (NOT the PHONE button) and navigate to the "CWM3_Voodoo.tar.md5" file you downloaded earlier. This file does not include a voodoo kernel and will not perform the voodoo lagfix conversion. It's only named as such to note that it is compatible with voodoo kernels.
7. Click START. When this process has finished, you'll be notified in Odin (succeeded 1 / failed 0) and your phone's screen will go blank.
8. Unplug your phone and re-insert the battery.
9. Press and hold BOTH volume buttons. While holding them, press the power button. Hold all three simultaneously until you see "SAMSUNG" appear. This will boot your phone into ClockworkMod Recovery. If your phone boots up normally here and not into recovery, just wait for it to boot up and then power it down and try again. It may take a couple tries for you to get it right.
10. Using the volume rocker, navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
11. Navigate to "choose zip from sdcard" and select with the power button.
12. Navigate to the "su-2.3.6.1.x.zip" file that you downloaded earlier and select it. Scroll to "Yes," and use power button to select.
13. When you're advised of completion, press the MENU softkey to go back to the previous CWM Recovery screen, then highlight and select "reboot system now."
At this point your phone will reboot and you'll be rooted. Open up your app drawer. You should see an app called "Superuser." If it's there, you're done! Now you can think about possibly moving on to a custom ROM and/or kernel. Instructions for flashing a custom ROM can be found here.
Thanks for any help and sorry for the Questions i read around and couldn't find anything i understood.
meareskm1 said:
Hey, Ive been wanting to get ICS on my Verizon Samsung Fascinate, I'm just really confused and what i need to do to get it on my phone after rooting. I want to use CM7 but i dont know which to use (Nightly/Stable).
All from bhfd64 on the Galaxy Forums
[HOW TO] Root Froyo or Gingerbread on Your Fascinate
Below you'll find the steps to attain root access on your Samsung Fascinate, but keep in mind that along with risking damage to your phone, you'll be voiding your warranty. This guide assumes you've taken the most recent OTA update and are running official Gingerbread. The responsibility for any damage incurred by following this guide is yours and yours alone.
NOTE 1: These instructions are for PC only. They will not work for Mac users.
NOTE 2: These instructions should work for any stock Gingerbread build on the Fascinate.
Downloads:
Download Samsung drivers from HERE.
Download Odin (computer program) from HERE.
Download ClockworkMod Recovery from HERE (place this file somewhere on your computer where you can easily locate it).
Download "su-2.3.6.1.x.zip" file from HERE (place this file on the root of your sdcard...not within any folders).
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs on your computer and/or phone for this to work properly.)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord that came with your phone into a powered USB port on your computer (usually on the back of the computer).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. (Let go of the volume button at this point.) You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Click the PDA button in Odin (NOT the PHONE button) and navigate to the "CWM3_Voodoo.tar.md5" file you downloaded earlier. This file does not include a voodoo kernel and will not perform the voodoo lagfix conversion. It's only named as such to note that it is compatible with voodoo kernels.
7. Click START. When this process has finished, you'll be notified in Odin (succeeded 1 / failed 0) and your phone's screen will go blank.
8. Unplug your phone and re-insert the battery.
9. Press and hold BOTH volume buttons. While holding them, press the power button. Hold all three simultaneously until you see "SAMSUNG" appear. This will boot your phone into ClockworkMod Recovery. If your phone boots up normally here and not into recovery, just wait for it to boot up and then power it down and try again. It may take a couple tries for you to get it right.
10. Using the volume rocker, navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
11. Navigate to "choose zip from sdcard" and select with the power button.
12. Navigate to the "su-2.3.6.1.x.zip" file that you downloaded earlier and select it. Scroll to "Yes," and use power button to select.
13. When you're advised of completion, press the MENU softkey to go back to the previous CWM Recovery screen, then highlight and select "reboot system now."
At this point your phone will reboot and you'll be rooted. Open up your app drawer. You should see an app called "Superuser." If it's there, you're done! Now you can think about possibly moving on to a custom ROM and/or kernel. Instructions for flashing a custom ROM can be found here.
Thanks for any help and sorry for the Questions i read around and couldn't find anything i understood.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1238070
just follow the required section 4 ..
u can choose the ics rom u want
Vabs
thanks thats actually the one i found after posting this. Now im just having trouble connecting to odin it says a device failed and that the device is unknown. Any help on that? i have tried multiple things that ive read like restarting computer different cables and cleaning the usb ports. Im using odin 1.83 on vista 64 bit. Could it be the drivers for the phone messing up?
Thanks in advance.
meareskm1 said:
thanks thats actually the one i found after posting this. Now im just having trouble connecting to odin it says a device failed and that the device is unknown. Any help on that? i have tried multiple things that ive read like restarting computer different cables and cleaning the usb ports. Im using odin 1.83 on vista 64 bit. Could it be the drivers for the phone messing up?
Thanks in advance.
Click to expand...
Click to collapse
Do you have the samsung drivers installed?
Sent from my SCH-I500 using xda app-developers app
shirtlessrabbit4 said:
Do you have the samsung drivers installed?
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Yes and i have unistall and reinstall 3 times. But it will connect in debugging mode and say com3 added but still nothing in d/l mode
meareskm1 said:
Yes and i have unistall and reinstall 3 times. But it will connect in debugging mode and say com3 added but still nothing in d/l mode
Click to expand...
Click to collapse
I know u may not have files for this or even know what it is, but have you tested to see if adb or fastboot work at all? Might be unrelated but I think that it shows if samsung drivers are working correctly
Sent from my SCH-I500 using xda app-developers app
shirtlessrabbit4 said:
I know u may not have files for this or even know what it is, but have you tested to see if adb or fastboot work at all? Might be unrelated but I think that it shows if samsung drivers are working correctly
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I've heard about it. Do you think you could link me a walk-through that youd suggest and I can try it later.
Sent from my SCH-I500 using xda app-developers app

Categories

Resources