Hi I am very new to these forums and the HD2. Today I decided to hspl3 my device and it was successful and i also updated my radio to 2.12.50.02.2 from 2.07.51.22.2. With all that i decided to run android froyo sense v2.4 by run the clrcad and haret. Since i started the haret the phone showed a little text at the top then the HTC Logo (green on black) has been there for 30min +. I dont really know if its supposed to do that as ive seen videos where it has the linux penguin at the top with text.
(As im not really familiar with terminology) is running android flashing or something else? I would also like to know if i have done something wrong as i really would like to run android on it.
Thanks if you can help figure out what ive done wrong.
+ i don't know if this helps but would i have to have a custom rom to use android?
1st- No .. It's not mandatory to flash a custom rom (But it's Recommended)
For the Android, Did you change the included kernel ? Because sometimes it may make android not to boot .
But if you copied Android folder as it is then try to format your sd card then delete the "Data.img" created inside Android folder and try again .
hey, i dont wanna warum up this theme, but before i start a new thread i rather post in a thread that is about the same problem ^^
(in first of all, im german and my english is good, but not the best ^^ so im sorry for some incorrect sentences or sense )
im also having this problem around 2 weeks...
im using this rom
http://forum.xda-developers.com/showthread.php?t=692763
Omega v3.4
with the Radio-Rom
Radio 2.10.50.28_2
and as you may think, my handy stucks after the executes linux code on the green HTC Logo. No one could help me, so im asking for the pro's in this forum for some answers.
Is it may possible, that every 3.14 rom makes problems with android?
so, thanks
and i hope you could help me, solve this problem
greez
Monolize
me too i am stuck in the htc logo for 1hr now and nothing has happen.
me too .. it stuck at HTC logo Rom 3.14
Related
hello fellow devs, so something is going around with tmobile leo's i have read that people cant flash ROMs anymore that our LEOs get stuck on the bootscreen. i unfortunetly am one of those. and its really frustraiting.
so i would like to know who else is experincing this issues and how they have delt with it? if anyone has found any solutions/tips/advice please do tell!!
and to all CHEFS.DEVS,USERS can please look into this and find out whats going on please!!!
i would love to you use my LEO again =[
thanks to everyone in advance!!
note to: MODS feel free to change this thread to the correct forum if this is not the correct one.
i too had this problem
i too had the same issue
after i hard spl my device and flashed an energy rom
my hd2 was stuck on the tmobile stick together boot screen. what i did was run task 29,update my radio to the latest one, format my sdcard in windows and flashed energy rom again with no sd inside. and once that was done, my phone was back to life again, but now im stuck with another issuse. now after all that is said and done my hd2 is still kinda of a paper weight becuase now when trying to watch videos or multitasking on the phone it just randomly freezes
Hello,
Same problem for me, I have the 1024LEO T-Mobile model and flashed with hspl 3 installed in the beginning with an energy ROM, but after problem to call people, I tried other ROMs and now it seems that the hspl has been removed and no possible to boot.
Even task 29 not anymore possible! With flashing from SD I always have RADIO_V2 - RSA Fail...
Please Help!!
I don't see other solution...
something is going on with tmobiles leos im old leo was perfect no problems at all, now i have seen people having these issues.
Now I've flashed the 2.03 ROM but not able to flash newer... And when I insert my SIM, always rebooting...
What can I do? Where is the problem? How flashing newer ROMs to return under hspl?
No issues flashing but battery drain on certain roms, I am thinking the HD2 is the worst phone next to the old Dash that T-mobile had a few years back. Sorry but I am starting to dislike this phone a lot now
no issues.
bought a 2nd hand TMO HD2 from ebay.
runs perfectly flashes perfectly!
Through the forums I've read that many people use Android on their device for daily use instead of winmo. I'd love to replace winmo myself my i have some questions:
-I have tried Android, but when i run it, it takes more or less 5 minutes to load. Is that how it's supposed to be or I'm doing something wrong. (i've read everywhere that the first time it takes 15mins or so, but havent found anywhere how long does it normally take). If it does take 5mins to load, what happens when you just have to soft reset the device? Isn't it annoying to wait 5 minutes just for one soft-reset? (it really annoying in winmo that it takes 1~ minute. cant image how its on android )
-Is Android that much customizable like winmo? i mean can u change the taskbar or softkeys, icons for the apps and stuff? i love customizations!
-How long can u run Android on your phone without recharging?
-Is there ANYTHING that you miss from winmo and you cant find it on android?
thanks in advance
hi there i cant answer all of your questions but some of them i can
I installed yesterday andriod on my phone (first i had to install hspl and then flash radio from 2.07 to 2.12) on radio 2.07 android wodnt boot i waited for like 30min notihng but with the 2.12 android boots for like a 1min or max 2 (froyostone sense 3.2.7 from htc desire) linux ubuntu too it boots the same time like android but i was disapinted in android because you can only install aplications from market and you dont have a sd card exloprer thats realy stupid my nokia 6300 could do that other than that android is amaizing beter then winmo (if htc did put android for os on the htc hd2 the pfone woud be more popular but with winmo they "killed" hd2's specs)
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
t45o5 said:
Hello, my HD2 started entering the re-boot loop ...........................Anw after that the phone is kind of dead, freezes at the HTC boot screen. ................I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. .
Click to expand...
Click to collapse
check the battery pins. ive read of people for whom it is possible to get into bootloader, and it seems like normal, but then it fails to load when trying to boot fully, usually a reboot loop.
forget about finding what rom is on there currently, its time wasted, really.
a better use of your time is using your serial to find out which rom the htc website will let you have, and flash that, from sd card preferably.
Why not just reset the phone, and start over?
found a good rom, installed it via sd card, still reboot loop. that make me think that the problem might be the battery pins. if so what's the solution?
same thing happend to me just adjust the pins
Foxanax said:
same thing happend to me just adjust the pins
Click to expand...
Click to collapse
how do you adjust the pins? They're supposed to be straight right?
t45o5 said:
Hello, my HD2 started entering the re-boot loop probably because of overheating (I live in a warm country and it started showing problems during the summer). After that, I installed the new official rom from the HTC website (finding a SN online :S) after trying to install the new rom I realised I shouldn't have tried that since it wasn't made for my SN. Anw after that the phone is kind of dead, freezes at the HTC boot screen. I have installed HSPL 1.42 on it but I can't load any new rom (I enter the bootloader - that's the only way I can think of since I got lost in a zillion posts) When it starts loading the new roms into the phone I get a 276 error saying it can't finished the procedure. (after such an error on the startup screen I still see the HTC logo but this time with black and white stripes covering the screen). I can't seem to find something similar in the other posts, I hope it wasn't answered somewhere previously. Even if so please redirect me or tell me what else to try since I'm quite frustrated!.. Please explain thoroughly because it's been a while since I was into hd2 tech stuff. Thank you in advance!
PS: Can I somehow find what rom I currently have IF there is one installed? I'm lost here....
Click to expand...
Click to collapse
Hi,
Did you find any solution for that problem?
Thnx
this morning i was pleased as punch,when i finally worked out after many hours of forum reading,how to ugrade my htc advantage(old faithful)from windos 5 to windows 6,all i needed was your stock rom(doh) now the complete idiot bit,feeling quite cocky with myself i tried to update to windows 6.5 while stile on spl-v1.20 (yes i know now) the problem is my phone is trying to boot to it and it failed at 96 percent,so if i now try to flash a new rom it tells me im upgading from nothing to which ever rom i try.some roms start to flash and then my phone says.not likely and switches itself off.now i know from the x7500 threads on here that theres a way of restoring my non existant radio,but nobody ever puts links to the downloads.please can somebody help many thanks your new idiot
Sorry for posting here, but there is no WinMo6.1 section for HD2. Maybe transfer the thread to WinMo6.1 subforum?
Also sorry, if I was maybe to stupid to pick the right keywords for search. Maybe I searched to complicated or noone was so stupid to want what I want.
Hi everyone. I made some stupid mistakes, and now my HD2's OS isn't booting anymore.
Preconditions
A HTC HD2 with open bootloader and installed Windows Mobile 6.1 ROM CrossbowHD2. There are some minor regedits for displaying japanese but those were no problem. Everything stable for half a year now.
What did happen?
Just wanted to install some software.
Japanese Advanced IME
Well, didn't saw the 'Raphael&Diamond' but there was no error while installing. After the installation it demanded a restart (no problem right), and since it doesn't boot beyond the white screen with the green HTC.
Guess it screwed up the registry.
BUT - and that's something good, isn't it? - the bootloadermenu is still working
What I want to achieve?
At best, full recovery without dataloss (no, don't have backups. Know myself it's stupid. Thanks). Maybe through reverting the regedits from the installation as can be found in the cab file?
Second best: Datarecovery via the bootloader through a tool or just flashing the original registry for backup (also the software won't work anymore) or some similar method.
Third: Memory dump? Is there a toll for converting the resulting binfile to something usefull?
Actually I just care about some of the note files, calender entries and pdfs. The pictures and similar may be lost if there's no other way.
Numbers:
Red booting numbers:
Code:
R 2.07.51.22_2
G 15.32.50.07W
D 3.14.04666 8G
Yellow bootloader numbers:
Code:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
So, am I crazy, or is there a way?
I guess I'm asking for the impossible?
So other suggestions for solutions or another subforum to post this in?
Or, for a change, is there a android version which looks and feels like mobile 6.1?
Try booting you device and connect it to the computer if actvesync can recognize it you might have a chance if not i dont know any other way.
As for the android part try a gingerbread rom since it is the most stable and equal to wm6.1 speed wise but graphic wise waaaay different.Although jellybean 4.2.2 seem fast they tend to slow down after a while.You could always dual boot win mobile and android native-sd.
Well, thats the problem. It doesnt even come this far as to connect to active sync
Actually, after 5 minutes or so I get a black screen which states, that the device is unable to boot because turned off incorrectly or a installation from a "untrusted source" and to press volume up to factory reset or anything else to cancel.
I thought, if you can flash/write a rom there maybe also is a way to read from there
I dont like android from desktop to setting fiddling but, well, most software nowadays...
Is there like the bootmanager for linux and windows on the desktop something for windows and android for pdas?
maybe there is something like a "lightweight android" (like feather linux) to use just for 3, 4 programs ^^
Well i do not know any other way to recovery your data you could just reflash the rom by going into bootloader ( remove the battery put it back in hold vol down and power on) and flashing a rom.
As for Android rom you can run it with wm but there is no true bootmanager as such. You need to load wm then android there are plenty of apps that can act like a boot manager but they stiill require wm to load then once loaded give you a choice to run wm or go to android.
For a light android rom go with and CM7 rom personally i would go with Sundawg's rom it was the most stable cm7 rom and is pretty light