I can't even turn it on, nothing. No combos would do anything
ODIN was stuck for like half an hour to an hour, so i had to do a battery pull, now it won't even turn on, nothing, nada.
Anybody have had this happen before?
Did The Battery Die?
Even If You Do A Battery Pull On ODIN
Nothing Will Happen You'd Be Able To ODIN Back
Erickomen27 said:
Did The Battery Die?
Even If You Do A Battery Pull On ODIN
Nothing Will Happen You'd Be Able To ODIN Back
Click to expand...
Click to collapse
While I'm not 100% sure that this wouldn't cause a brick. I know that I've pulled my battery out during an odin flash with out bricking. Plug in the charger just to make sure.
draikz said:
I can't even turn it on, nothing. No combos would do anything
ODIN was stuck for like half an hour to an hour, so i had to do a battery pull, now it won't even turn on, nothing, nada.
Anybody have had this happen before?
Click to expand...
Click to collapse
You might try to get into download like this
1. remove batt.
2.plug usb into computer
3.put batt. in
4.hold volume down+up
5. plug usb into phone.
Then try Odin again
If that doesn't work you might try building a jig:
http://forum.xda-developers.com/showthread.php?t=819551
Good luck!
If all else fails, there's always the homemade jig method. I haven't tried it but lots have had success.
EDIT: beat me to it dave. Good post
Sent from my SGH-T959 using XDA App
Its a true brick if you cant get in download mode or turn it on. The jig is for people that flashed wrong firmware or pulled battery out in odin and dont have working 3 button combo but the phone does turn on. I have tried a working jig with captivate that wont turn on and no working 3 button combos and had no luck. I have bricked a few captivates with ULF kernel and bad flash's. I do not use ULF kernels any more. Did you have ULF kernel loaded before you flashed?
shep211 said:
Its a true brick if you cant get in download mode or turn it on. The jig is for people that flashed wrong frameware or pulled battery out in odin and dont have working 3 button combo but the phone does turn on. I have tried working jig with captivate that wont turn on and no 3 button combos work and had no luck. I have bricked a few captivates with ULF kernel and bad flash's. I do not use ULF kernels any more. Did you have ULF kernel loaded before you flashed?
Click to expand...
Click to collapse
Not true. My phone couldn't turn on at all. The screen remained black even when plugged into usb or a charger. Removing/replacing the battery did nothing. I plugged into usb, pulled battery, and held the volume buttons while inserting the battery, BAM dl mode.
richan90 said:
Not true. My phone couldn't turn on at all. The screen remained black even when plugged into usb or a charger. Removing/replacing the battery did nothing. I plugged into usb, pulled battery, and held the volume buttons while inserting the battery, BAM dl mode.
Click to expand...
Click to collapse
I said if download mode does not work. If you try every way to get into download mode and it does not work or turn on then you have a true brick.
Same...
I've got the same problem. The jig method won't work...it says it right in the guide. Did you get anything to work?
I'm still not convinced this is possible without actual physical damage being inflicted through faulty charger/usb cable, shock, water, or otherwise... A rogue battery pull sounds a bit far fetched to cause this kind of damage, but you never know...
Download mode is likely the answer you're looking for. Figure out a way into it.
Haha, this thread is so old. Check my signature.
opentofalling said:
I'm still not convinced this is possible without actual physical damage being inflicted through faulty charger/usb cable, shock, water, or otherwise... A rogue battery pull sounds a bit far fetched to cause this kind of damage, but you never know...
Download mode is likely the answer you're looking for. Figure out a way into it.
Click to expand...
Click to collapse
This is 100% possible to have a hard brick. Nothing but JTAG can revive the phone in this condition. I have the ability to bring a hard bricked phone back from the dead as well as a phone in any bricked state where a JIG won't work. Just pm me if you need help...
connexion2005 said:
This is 100% possible to have a hard brick. Nothing but JTAG can revive the phone in this condition. I have the ability to bring a hard bricked phone back from the dead as well as a phone in any bricked state where a JIG won't work. Just pm me if you need help...
Click to expand...
Click to collapse
i need help this happened to me.
what happened was.... i went from darky v 9.5 to cm7. didnt like cm7 so nand restore back to darky. brick. tried to odinback to stock. stalled. removed battery tried again. stalled. held down power button with no battery in (standard hardware power cycle) now i get absolutley nothing. no power, no chargining indicator. nothing. i think ive no choice but to use my phone insurance and report it stolen. (i cant use warranty to tmobile since i have an ffc by the amazing connexion) so if anyone else has suggestions, speak now before i make the call. (will wait 1 day. cant be without my phone.)
Take battery out, plug into computer...mame sure you have drivers installed, hold down volume down put battery in, then push power while still holding power down. You should be in download mode
Sent from my SGH-T959 using XDA Premium App
Excuse me, but when I saw this thread's topic I replaced one word and laughed badly.
SuperJMN said:
Excuse me, but when I saw this thread's topic I replaced one word and laughed badly.
Click to expand...
Click to collapse
Oh you, comedy is best when you have a true hard brick
Michaelk706 said:
Take battery out, plug into computer...mame sure you have drivers installed, hold down volume down put battery in, then push power while still holding power down. You should be in download mode
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
.....this would have worked if i hadnt mentioned that i had been in DL mode already. but thank you for your suggestion none the less.
McBangg if you are still powerless I can fix this with JTAG just PM me. I'm one of the only people capable of currently reviving a hard brick.
connexion2005 said:
McBangg if you are still powerless I can fix this with JTAG just PM me. I'm one of the only people capable of currently reviving a hard brick.
Click to expand...
Click to collapse
message sent
I just recovered my phone from what i believed was a hard brick, it would not power on using the 3 button method i pulled my battery and still nothing. so i did a little bit of looking around on the internet and came accross fractionalphones .com/?p=185 after following the steps i got back into download mode used odin and flashed my phone back to stock.
Hope this helps
Related
I have been flashing roms to the Vibrant for some time now. I do it for my customers all of the time. For one customer i was reverting him to stock after he bricked his phone. The flash went good and oden declared it successful. The phone turned off to reboot and never turned back on. ANY IDEAS? ANY FIXES? Anything will help. even if it is bad news.
Im looking to sell the thing regardless. Im sure some one can scrap it out for good hardware
This is not a SOFT BRICK. i get no power. which means i can not odin back to stock.
Have you tried getting into D/L mode through hardware keys?
I would do my best to get it back into DL mode and try Odin again.
What version of Odin are you using? Also, what .pit and .tar?
Drewstein said:
I would do my best to get it back into DL mode and try Odin again.
What version of Odin are you using? Also, what .pit and .tar?
Click to expand...
Click to collapse
Look for version 1.7 in the bible.
This should have everything you need.
http://forum.xda-developers.com/showthread.php?t=810130
Good luck.
I get no power. I have tried many combos of key combinations including different timing of usb connect. Nothing. When i plug it into the charger the phone is dead. no battery signal. no dock lights.....nothing. if i could get to download mode i could fix it. I cant get a hiccup out of this damn thing
using the newest odin and i used the unofficial froyo 2e odin file
Wow dude, it might be a true blue brick. I bricked mine not too long ago, nothing I could do would bring it back...warranty replacement took care of it for me.
Sorry man, you can try different combinations and see if it brings it back to life...but those are pretty much all the symptoms mine had.
Good luck!
If you tried the last resuscitation method - remove battery, plug in usb, hold vol +- and insert battery, and that didn't work you could always try the JIG method. If you're planning on selling it the JIG may be worth the investment as a running stock phone sells for a lot more than a brick.
i have the exact same problem.. did you find a fix for it... do you thing factory exchange warranty will cover it
i tried that do and nothing.. no sign of life..
so did tmobile charge you for the exchange..
what the jig method
http://forum.xda-developers.com/showthread.php?t=849028
All will be revealed there
I had this happen once..freaked me out.. what had happened was I odined on an almost dead battery and by the time it was done it wouldnt do anything. I plugged it in to a wall outlet and let it sit there and then i went thru the process of removing the battery, plug usb into pc, hold volume+pwr keys and plug usb into phone and it came on.
rhymestars said:
I get no power. I have tried many combos of key combinations including different timing of usb connect. Nothing. When i plug it into the charger the phone is dead. no battery signal. no dock lights.....nothing. if i could get to download mode i could fix it. I cant get a hiccup out of this damn thing
Click to expand...
Click to collapse
MAYBE, just maybe, the batterys out, put another one in and see if it turns on?
thsi happened to me too the hard brick, i just sent it to tmobile saying i dont know what to do and they sent me a refurb, and done.
hellobitchdog said:
what the jig method
Click to expand...
Click to collapse
check THIS out. pictures are provided in later posts.
I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6
I was using Team Whiskey Nero 5 and install Axura 2.2.7 and now phone wont even turn. Wall charger not even coming on. If I can get it into download mode then I can use ODIN and put it back to stock. Im desperate for a way for my phone to turn on.
Plz anybody, can you offer some advice, as I feel like crying now
CyberMix_JM said:
I was using Team Whiskey Nero 5 and install Axura 2.2.7 and now phone wont even turn. Wall charger not even coming on. If I can get it into download mode then I can use ODIN and put it back to stock. Im desperate for a way for my phone to turn on.
Plz anybody, can you offer some advice, as I feel like crying now
Click to expand...
Click to collapse
Let me get this straight...
You had Nero V5 installed then u you tried installing Axura??
1. Take your battery out and put it back in (To make sure its off)
2. Open Odin on your PC..
3. Hold both Volume buttons while plugging the USB cord in...
4. It should go into Download Mode
Tried, still haven't work. Seem like everything on the phone is messed up. It wont even turn on to go into download mode.
I feel like such retard. Is there anything I can do, plz I need help
Tried, still haven't work. Seem like everything on the phone is messed up. It wont even turn on to go into download mode. I tried the wall charger and not even the battery indicator that should appear come on. It seems like the phone as become non responsive
I feel like such retard. Is there anything I can do, plz I need help
how about hold both volume key and hold power key at the same time?
still no response ... reading other thread on the site it seems I may have done a Total Brick ...
Now I feel Total stupid
lol wtch this put ur phone to charger in wll for 5 min unplug it take out bttery plug usb cble to compute hod vol up vol down plug ur phone to usb conected cable whilebholding vol upbdown, enjoy odining back
tried that, but to no avail
a JIG is your last resort then...
Yea, I believe so, if it doesn't work, then I will have to send it back
CyberMix_JM said:
Yea, I believe so, if it doesn't work, then I will have to send it
Click to expand...
Click to collapse
I did the same thing to my first Vibrant. It all worked out though, cuz the phone i got back was manufactured after October '10 so it had the hardware GPS fix.
The return was easy. I just told them that I plugged it in to let it charge overnight and when i woke up it wouldn't turn on.
Thanks, nice one
CyberMix_JM said:
Thanks, nice one
Click to expand...
Click to collapse
ive yet to see anyone mention this. it always works for me:
take your battery out
plug your phone into PC (with battery still out)
reinsert battery WHILE holding volumeup/volumedown
^^^gets me into download mode everytime
Hi all, i am running the latest version of Bionix i went to hit the reboot option and accidentally selected the download mode button. I pulled the battery out before it fully shutdown, me being impatient. When i put the battery back in the phone immodestly turned on and tried to boot, and stays on the vibrant screen for about 2-3 seconds then shuts off and try's to boot back up again on its own. Also when plugged in it continues to boot loop, it never shows that it is charging, only the battery with the loading circle, then ****s off and repeats.
I am not new to modding, and i am not new to getting my phone into recovery or download mode. The problem is the phone does not respond to the hardware keys, and i am positive that it used to be able to reach download mode via keys, i do not have a hardware locked vibrant.
I guess my question lies in the realm of another way to reset the phone, maybe via shorting pins or something? Does anyone know of an alternate method that does not rely on keys or software to reset the phone?
Thanks in advanced!
A jig
Sent from my SGH-T959 using XDA App
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
You might have to have odin up and running before you do the battery pull
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Good point !!!
daddysays said:
I have been in similar circumstance. Have you tried the battery methods to get into dl mode?
Remove battery and connection to computer.
plug phone back into computer
Hold volume up and down
Insert battery while holding buttons
That should work because it will put you in dl mode before it has a chance to boot loop
Click to expand...
Click to collapse
nomadrider123 said:
You might have to have odin up and running before you do the battery pull
Click to expand...
Click to collapse
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
duboi97 said:
A jig
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Please explain.
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
almyz125 said:
Thanks for the responses i haven't heard of this method. I will defiantly try when i get home in about 2 hours and report back.
Click to expand...
Click to collapse
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
dougstoner said:
A jig is a mod'ed usb device that will basically force your vibrant into download mode. Just use the method mentioned earlier....ie
Have odin up and running.
Pull battery
plug in cable
hold vol up and down
put battery in
should get you into download mode. Sometimes it took a few tries with Odin already loaded to successfully do it, but you shouldn't have any issues.
Click to expand...
Click to collapse
Thanks for the info, i may look into getting/making a jig. I would be nice to have around.
daddysays said:
Keep us posted, I follow your twitter so send a post if it works or doesnt, and Ill come on here and try to help you out if it doesnt. I have had similar soft brick issues so many times now it gets to a point where you just play with it till you recover.
Point being there is lots of ways to overcome this.
Click to expand...
Click to collapse
Thanks again.
LovellKid said:
Hey man Ive been in a similiar situation as well.... this has been the ONLY way that has worked, not even the above mentioned methods.
Phone not plugged in at all yet. Battery pull for 10 seconds, put back in, BEFORE plugging in phone, hold volume up button (if this doesnt work try both volume buttons, sorry been out of the Vibrant for a while for my NS) while plugging phone in (still holding volume up button), hold till it throws into DL mode.
Hope that helps man!
Click to expand...
Click to collapse
I've tried that method, it used to work for me. This soft brick is different than any other I've encountered. The phone has never automatically tried to boot when i put the battery into it, it makes things harder. But thanks and ill give it ago again.
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
almyz125 said:
No such luck with the battery method, it still just boot loops. I tried at least 2 dozen times.Anyone want to tell me how to get my hands on a jig?
Click to expand...
Click to collapse
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Also try different combos of being plugged in and not. And recovery or download mode. Recovery will be just as useful as dl mode.
Sent from my SGH-T959 using XDA App
daddysays said:
I think that method with the battery is just referred to as a jig by some people.
I would try the battery method with odin ready to go and without, and sometimes it takes a couple tries.
Also just try holding all the buttons while unplugged, for a long time, then on one of the boot loops as soon as you see anything flicker in the screen release the power button, then try all buttons, then just volume buttons. Sometimes playing with it like that just kinda forces it.
Does odin see it in com port? Do you have correct drivers installed to use odin? Sdk installed as well?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
A jig is THIS, it shorts out pins in the micro usb port forcing it to download mode. I am positive i have the correct drivers and the sdk installed right. This isn't the first time I've been soft bricked and i am very familiar with DL mode and Recovery, and how to reach them traditionally. This soft brick is different though for what ever reason. I am going to have to try this jig, and if that doesn't work, i think ill have to read up about the jtag pins on it, if anyone has more information on jtaging a Galaxy S please post!
Did you ever end up trying the jig? I'm having the exact same problem you were. Thanks
I hard bricked a vibrant by trying to flash a rom on a low battery. Battery died in the middle of rebooting thus killing my vibrant with no way of recovery (seriously, charged the battery and the phone still wouldn't turn on... at all). Anyway, while trying to fix it, I actually made a jig. It's a lot easier than it sounds. You basically cut the plug that goes into your phone off of the cord down to where you can see all of the wires. Once you do that you break off the plastic shell that covers the plug. You then use a 301k resistor (I couldn't find that exact one so I bought 3 x 100k resistors and a 1k resistor then twisted them together).. plug the usb side into your phone then touch the opposing ends of the resistor onto wires 4 and 5 and it should go into download mode. You don't necessarily have to solder the resistor to the wires but you can. It makes it a bit easier considering you can't touch the wire part of the resistor or the static will mess up the voltage. Otherwise, Amazon sells jigs for a few bucks.
I wanted to post the url for the site that I found useful in making a jig but because I'm a "junior user" I can't. So if you search for "usb jig" on amazon there are a few; if you want to make one google "how to unbrick samsung vibrant" there is an article on factoidz called "How to unbrick your samsung vibrant/galaxy s" which I found to be the most useful.
Hope this helps!
I bought a jig off ebay and it worked like a charm! Worth its weight in gold! I now have a working phone again after being phoneless for 5 days.
Failed to replace stock recovery now get only there.
Hi, similar situation please help.
From stock 2.1 I rooted with King root Chinese zip then to go for a new ROM I renamed a cwm zip in update.zip and I read replacing stock recovery..... and saw this cwm just a couples of times, as it revert to stock recovery and doesn't switch on anymore, show grey battery logo fixed when charging, and now after removing the battery for long it goes in stock recovery se2 , cleaned cache and data but nothing change.
Is there please a solution without PC?
Thanks
Hi evereybody, I hope you can help me.
My problem is yesterday I was trying to go back to Official rom in my SGS2 AT&T version and I Flashed it with ODIN and everything was ok but when the phone rebooted it stocks in AT&T Logo and nothing happened, I´ve tried many solutions like this threads:
http://forum.xda-developers.com/show...php?p=18759297
http://forum.xda-developers.com/show....php?t=1325282
http://forum.xda-developers.com/show...3#post19898373
but nothing happened, so, the problem is I can not enter to download mode because my phone doesn´t turn on anymore, please, I need your help, I´me really sorry if this thread doesn´t belong here, I will aprecciate if some moderator move it correctly for me.
I need your help guys
Power the phone off completely. Pull the battery. Put the battery back in after about 30 seconds. Hold down both volume buttons while also plugging in the USB cable. Keep the vol buttons held down until you see the d/l screen come up. Let go of the buttons and then click vol up once to proceed to d/l mode.
Sent from my SAMSUNG-SGH-I777 using xda premium
Kadin said:
Power the phone off completely. Pull the battery. Put the battery back in after about 30 seconds. Hold down both volume buttons while also plugging in the USB cable. Keep the vol buttons held down until you see the d/l screen come up. Let go of the buttons and then click vol up once to proceed to d/l mode.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I will try that but the thing is the phone doesn´t turn on I can not do anything is dead
nothing happened Kadin the phone is dead
DarkEvilGod said:
nothing happened Kadin the phone is dead
Click to expand...
Click to collapse
Sorry I guess I missed that part. Thought it was stuck at the AT&T screen. Try leaving the battery out for a good ten minutes or so and then seeing if it responds by plugging in the charger.
Sent from my SAMSUNG-SGH-I777 using xda premium
Kadin said:
Sorry I guess I missed that part. Thought it was stuck at the AT&T screen. Try leaving the battery out for a good ten minutes or so and then seeing if it responds by plugging in the charger.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Ok I will try that and after that I´ll let you know what happened thanks.
Nothing happened? any other solution?
What was the battery level like when the phone last turned on? If you can't get it to power up at all, there's only so much you can try. I'd try plugging it into a different outlet as well as maybe the computer and see if you can get any response from it.
When you have the battery in and press and hold power, do you see the softkeys briefly blink like they normally do when turning the phone on? It's possible that the battery is somehow the problem but I guess it could be the phone too. Would love some other input from other people cause I'm at a loss on what else to try.
Kadin said:
What was the battery level like when the phone last turned on? If you can't get it to power up at all, there's only so much you can try. I'd try plugging it into a different outlet as well as maybe the computer and see if you can get any response from it.
When you have the battery in and press and hold power, do you see the softkeys briefly blink like they normally do when turning the phone on? It's possible that the battery is somehow the problem but I guess it could be the phone too. Would love some other input from other people cause I'm at a loss on what else to try.
Click to expand...
Click to collapse
It was at 30% I think the battery is discharged but I don´t know how to recharged.
When I press and hold power or vol up and down the softkeys don´t blink.
Yes I know I need more people to give solutions but thank you very much Kadin.
Well if you think it's fully discharged, leave it plugged into the wall for a while. It's possible that it dipped down below the point where it normally shuts off (around 5%) and may need a good long charge to get it back alive. I'd attempt that if you haven't already.
Kadin said:
Well if you think it's fully discharged, leave it plugged into the wall for a while. It's possible that it dipped down below the point where it normally shuts off (around 5%) and may need a good long charge to get it back alive. I'd attempt that if you haven't already.
Click to expand...
Click to collapse
I´m gonna leave it again all night but sincerly I don´t think that might work.
DarkEvilGod said:
but when the phone rebooted it stocks in AT&T Logo and nothing happened
Click to expand...
Click to collapse
So - it got to the AT&T logo - tell us EXACTLY what you did after that.
It might help too if you explain what it was you did to the phone to try to get back to att stock.
Include the filenames used, and if you Odined, where you used them.
Just a thought,
AoN
Sent from my SAMSUNG-SGH-I777 using XDA App
Dead Phone
DarkEvilGod said:
Hi evereybody, I hope you can help me.
My problem is yesterday I was trying to go back to Official rom in my SGS2 AT&T version and I Flashed it with ODIN and everything was ok but when the phone rebooted it stocks in AT&T Logo and nothing happened, I´ve tried many solutions like this threads:
I need your help guys
Click to expand...
Click to collapse
There is a very good chance that if you charge the phone with wall charger
to be sure the battery is not dead and then use a JIG which will get it into
download mode you will be able to reflash the stock rom.
You can buy a JIG for less than $2 bucks including shipping on eBay.
Be sure that when you do get it into download mode to re-download
the stock rom just to be sure that the rom file is not corrupted.
Good luck!
Entropy512 said:
So - it got to the AT&T logo - tell us EXACTLY what you did after that.
Click to expand...
Click to collapse
I´ve reflashed this rom I777UCKH7 OCD No BL.7z two times with odin and it said "OK" the phone reboot but when the loggo appears stocks there, the battery is not dead, yesterday I took the phone to some center and they´ve said is not dead but I can not do anything also with the jig.
Also I used this thread to back to return to original rom
http://forum.xda-developers.com/showthread.php?t=1313659
DarkEvilGod said:
I´ve reflashed this rom I777UCKH7 OCD No BL.7z two times with odin and it said "OK" the phone reboot but when the loggo appears stocks there, the battery is not dead, yesterday I took the phone to some center and they´ve said is not dead but I can not do anything also with the jig.
Also I used this thread to back to return to original rom
http://forum.xda-developers.com/showthread.php?t=1313659
Click to expand...
Click to collapse
The way you phrased your description above make it sound like you flashed a .7z file in Odin3. If you tried to do that, it wouldn't work, or course. The file you named, I777UCKH7 OCD No BL.7z contains an executable file that is an Odin one-click downloader. You have to extract the file from the 7 zip archive first, then run the file in windows, then connect your phone to the pc. Maybe that's what you did but your description is confusing?
creepyncrawly said:
The way you phrased your description above make it sound like you flashed a .7z file in Odin3. If you tried to do that, it wouldn't work, or course. The file you named, I777UCKH7 OCD No BL.7z contains an executable file that is an Odin one-click downloader. You have to extract the file from the 7 zip archive first, then run the file in windows, then connect your phone to the pc. Maybe that's what you did but your description is confusing?
Click to expand...
Click to collapse
Sincerely I don´t remember what else I did but the problem is I can not do anything because I can not enter to download mode or recovery, the phone doesn´t turn on even with jig.
This happened on my captivate based on what I have read your phone is hard bricked and is basically a large paper weight now. But don't take my word for it I sold my cappy on Ebay when I hard bricked it and about a month later there was a fix for it with a jtag goodluck
Sent from my GT-I9100 using xda premium
I also tried the jig I couldn't get any response... It wouldn't turn on or anything
Sent from my GT-I9100 using xda premium