Hello guys,
I am from Singapore and this is the first time I post something, I hope someone can help me.
Recently my HD2 was faulty and I sent it to HTC, they replaced the motherboard and everything was OK, (so I tot), until I realized that, my phone is always on high program memory usage, with no program running. (see the pictures below)
I need help, please.
your total program memory is about 128 meg too low, it should be about 336 total with usually around 200 or so used, and 120 free. Do you have a pre production test model?
When you enter bootloader, what does your spl say? x.xx.xxxx
Hi Sam,
Thank you for the quick reply.
This HD2 is not a pre production model, I got it from a local telco.
So how do I increase the Total Mermory???
SPL-3.03.0000 XE
hmm so the spl is correct for the 3.14 rom, so it isn't that.
You can't increase the total memory, it is 336 meg (448 total minus 128 graphics) for a regular hd2, and thats it. There is no adjusting it.
Not really sure what to suggest, though I think my first step would be calling your telco(or htc, whoever you sent it to) and kicking up a fuss and getting a replacement.
I called up HTC, they told me it could be hardware fault, gotta send in for repair
ah, bit of a pain losing it again for a week, but better to let them replace it than you make it worse fiddling.
i gto my hd2 a week ago. it already had some ugly energy gtx costum rom on it. i flashed it with stock 3.14 rom that i downloadet directly from htc webpage. after this the phone had only around 60MB of RAM free. so i flashed the phone with rom on this link http://forum.xda-developers.com/showthread.php?t=610634 now i have around 300MB of RAM free when i start the phone. if i close all the apps, and disable htc sence its up to 330MB of ram free. on the official ROM 3.14 i also had only around 100MB of free internal storage. with this costom ROM its almost 200MB. and it still its stable has a greater htc sence then official rom. it has alot of apps alike rdc, mp3 trimmer... all you realy need.
So if you are not against flashing you can make your hd2 a great fast stable phone with lots or free ram and more internal storage then it was supposet to have out of the factory. oh and HD2 officialy has 448MB of RAM. But it also has 128MB hiden or locked or something... witht his ROM you have that 128MB unlocked so you have 576MB of ram.
gbajzelj said:
i gto my hd2 a week ago. it already had some ugly energy gtx costum rom on it. i flashed it with stock 3.14 rom that i downloadet directly from htc webpage. after this the phone had only around 60MB of RAM free. so i flashed the phone with rom on this link http://forum.xda-developers.com/showthread.php?t=610634 now i have around 300MB of RAM free when i start the phone. if i close all the apps, and disable htc sence its up to 330MB of ram free. on the official ROM 3.14 i also had only around 100MB of free internal storage. with this costom ROM its almost 200MB. and it still its stable has a greater htc sence then official rom. it has alot of apps alike rdc, mp3 trimmer... all you realy need.
So if you are not against flashing you can make your hd2 a great fast stable phone with lots or free ram and more internal storage then it was supposet to have out of the factory. oh and HD2 officialy has 448MB of RAM. But it also has 128MB hiden or locked or something... witht his ROM you have that 128MB unlocked so you have 576MB of ram.
Click to expand...
Click to collapse
different problem. yours is because you had hspl with a 3.14 rom.
Ram error
samsamuel said:
different problem. yours is because you had hspl with a 3.14 rom.
Click to expand...
Click to collapse
Hi. I have Hspl 2 and 3.14 rom installed too, and the same problem with memory: The system shows a total program memory of 208.8 mb and a huge memory usage with no running programs. In the hardware info the ram appears correct: 512 mb. Is this a bug of 3.14 rom? and if so is there a solution?
oxk4r said:
Hi O2. I have Hspl 2 and 3.14 rom installed too, and the same problem with memory: The system shows a total program memory of 208.8 mb and a huge memory usage with no running programs. In the hardware info the ram appears correct: 512 mb. Is this a bug of 3.14 rom? and if so is there a solution?
Click to expand...
Click to collapse
its well discussed in loads of threads. any spl/hspl except 3.03.0000 will cause this with 3.14 roms. simple as that, no workaround. only way to get 3.14 on a branded phone (until o2 give us a 3.14 rom,,,,, next summer,,,) is goldcard.
samsamuel said:
its well discussed in loads of threads. any spl/hspl except 3.03.0000 will cause this with 3.14 roms. simple as that, no workaround. only way to get 3.14 on a branded phone (until o2 give us a 3.14 rom,,,,, next summer,,,) is goldcard.
Click to expand...
Click to collapse
Ok, thks. Just a question: is it possible to install hspl 3 without flashing the rom again?
oxk4r said:
Ok, thks. Just a question: is it possible to install hspl 3 without flashing the rom again?
Click to expand...
Click to collapse
Not in combinations with stock ROM 3.14
oxk4r said:
Ok, thks. Just a question: is it possible to install hspl 3 without flashing the rom again?
Click to expand...
Click to collapse
don't confuse hspl3 with spl 3.03.0000
no, you can't fix the spl without flashing.
Sorry, but I'm noob, and I'm getting a little confused...
So, the solution for run 3.14 rom in a branded phone without bugs as the memory one, is first update hspl to v3.03.0000, and then flash the 3.14 rom, isn't it?
its use a goldcard. that's it.
both those steps you mention are part of the same process, not separate.
samsamuel said:
both those steps you mention are part of the same process, not separate.
Click to expand...
Click to collapse
Does it mean that when you install a 3.14 rom, hspl is automatically updated to v 3.03?
oxk4r said:
Does it mean that when you install a 3.14 rom, hspl is automatically updated to v 3.03?
Click to expand...
Click to collapse
Yes sir spl will be updated.
And where should appear that hspl version number? If I soft-reset pushing volume down, I find this info:
PB81100 HX-BC
SPL-1.66.HSPL XE
0x05
CotullaHSPL 0x38
but I can't see HSPL version 3.03 anywhere.
oxk4r said:
And where should appear that hspl version number? If I soft-reset pushing volume down, I find this info:
PB81100 HX-BC
SPL-1.66.HSPL XE
0x05
CotullaHSPL 0x38
but I can't see HSPL version 3.03 anywhere.
Click to expand...
Click to collapse
Sir like mentioned before you need to remove HSPL before installing stock ROM 3.14!
HSPL and stock ROM 3.14 (spl 3.03) isn't compatible.
Your solution is to flash a ROM from the HTC website, and since you have an O2 branded phone, then you need to download the 1.72 O2 ROM. Now your SPL will be 1.66.0000. You will need to do a bit of reading on how to do GoldCarding, then you can flash the 3.14 ROM.
Related
Hi Guys,
I've read on alot of posts on the net that people who updated to the latest official stock rom 3.14.405.2 (04666) WWE have managed to unlock the extra 576mb ram in their HD2 can anyone confirm this and if so how ?
I have just done the update in the U.K but the ram remain the same which was 448mb.
Does anyone know anything about this ?
Thanks for all your help.
121man said:
Hi Guys,
I've read on alot of posts on the net that people who updated to the latest official stock rom 3.14.405.2 (04666) WWE have managed to unlock the extra 576mb ram in their HD2 can anyone confirm this and if so how ?
I have just done the update in the U.K but the ram remain the same which was 448mb.
Does anyone know anything about this ?
Thanks for all your help.
Click to expand...
Click to collapse
Sir this is a trick; the peoples who see the 576MB of ram used the HSPL3, unfortunately this means thy have only access at 50MB of storage
boba23 said:
Hmm And how exactly do you explain, that I just, right now, copied over 100mbyte of radio roms onto my main storage? Still have 55MByte left of storage space.
I am running a 576mb enabled rom, using HSPL3, base of the rom is 3.14. Now what?
boba
Click to expand...
Click to collapse
I am running a 576mb enabled rom, using HSPL3, base of the rom is 3.14.
Use spl not hard HSPL!!
These it strange. I have flashed the new WWE STOCK ROM and then the German Stock ROM 3.14.
On the WWE STOCK 3.14 i had 576 MB RAM
On the German STOCK 3.14 i have 448 MB RAM
Both where flashed without HSPL.
So its hard for me to beleve that this have anything to do with HSPL!?!
But i think the 576 MB maybe not real because when i test it with some proge on both i had a real RAM from 448.
A strange thing this 576 MB RAM but if it is real i dont know.
EDIT: But sometimes i have the feeling that the 576 MB ROMS faster as the 448 MB ROMS. But maybe this is a placebo effect!
Dic3ptor said:
These it strange. I have flashed the new WWE STOCK ROM and then the German Stock ROM 3.14.
On the WWE STOCK 3.14 i had 576 MB RAM
On the German STOCK 3.14 i have 448 MB RAM
Both where flashed without HSPL.
So its hard for me to beleve that this have anything to do with HSPL!?!
But i think the 576 MB not real because when i test it with some proge on both i had a real RAM from 448.
A strange thing this 576 MB RAM but if it is real i dont know.
EDIT: But sometimes i have the feeling that the 576 MB ROMS faster as the 448 MB ROMS. But maybe this is a placebo effect!
Click to expand...
Click to collapse
Like we say here in Belgium some things are so strange we don't do the effort to search way!!
Probably HTC have get so much complains about the fact the USA model have 576 MB so and the EU version don't have that thy have decide to do this, so peoples are still
Help
Hello
Guys I've installed official 3.14.405.2 (WWE) but the memory usage is always over 80% !!! and it won't let me run most of applications.
When I enter the bootloader it says SPL 2.08 HSPL
Please help me solving this problem.
Thanks
arash998 said:
Hello
Guys I've installed official 3.14.405.2 (WWE) but the memory usage is always over 80% !!! and it won't let me run most of applications.
When I enter the bootloader it says SPL 2.08 HSPL
Please help me solving this problem.
Thanks
Click to expand...
Click to collapse
Using HSPL with the latest Rom 3.14 caused problems sir like mention earlier!
Remove your HSPL version, so that you have the SPL 3.03 who is integrated in Stock Rom 3.14!
kurt-willems said:
Using HSPL with the latest Rom 3.14 caused problems sir like mention earlier!
Remove your HSPL version, so that you have the SPL 3.03 who is integrated in Stock Rom 3.14!
Click to expand...
Click to collapse
Thank you sir
How could I remove HSPL ?
I run the HSPL3 exe file and this time choose SPL 2.08.0000 instead of 2.08 HSPL but the problem still remains.
What should I do ?
Do a hard reset? Re-Install the ROM? Or what ?
Dic3ptor said:
These it strange. I have flashed the new WWE STOCK ROM and then the German Stock ROM 3.14.
On the WWE STOCK 3.14 i had 576 MB RAM
On the German STOCK 3.14 i have 448 MB RAM
Click to expand...
Click to collapse
On my leo WWE stock has 448mb of RAM. With spl 3.03 obviously.
arash998 said:
Thank you sir
How could I remove HSPL ?
I run the HSPL3 exe file and this time choose SPL 2.08.0000 instead of 2.08 HSPL but nothings changed.
What should I do ?
Click to expand...
Click to collapse
Chose SPL 1.66
Ore flash Stock rom 1.66 from SD.
when you have SPL 1.66 you can upgrade to Stock Rom 3.14
kurt-willems said:
Chose SPL 1.66
Ore flash Stock rom 1.66 from SD.
when you have SPL 1.66 you can upgrade to Stock Rom 3.14
Click to expand...
Click to collapse
I flashed SPL 1.66 via HSPL2 and tried to install the 3.14 ROM again but it shows Invalid Vendor ID error and didn't let me install the ROM (I downloaded the ROM from a direct link, not HTC website, cause it doesn't accept my serial number)
Is there any other way sir ?
arash998 said:
I flashed SPL 1.66 via HSPL2 and tried to install the 3.14 ROM again but it shows Invalid Vendor ID error and didn't let me install the ROM (I downloaded the ROM from a direct link, not HTC website, cause it doesn't accept my serial number)
Is there any other way sir ?
Click to expand...
Click to collapse
Hello !?
Guys is there any other way ?
arash998 said:
I flashed SPL 1.66 via HSPL2 and tried to install the 3.14 ROM again but it shows Invalid Vendor ID error and didn't let me install the ROM (I downloaded the ROM from a direct link, not HTC website, cause it doesn't accept my serial number)
Is there any other way sir ?
Click to expand...
Click to collapse
I advice you to wait till HTC launch a compatible Rom update fore your device sir. I suppose you have a branded device!?
kurt-willems said:
I advice you to wait till HTC launch a compatible Rom update fore your device sir. I suppose you have a branded device!?
Click to expand...
Click to collapse
Thanks you sir
How could I find out which country my phone belongs to !?
all you have to do is download the official rom extract it
find the file name RUU_signed.nbh and rename it LEOIMG.nbh
copy this file to a formated sd card now hold the volume down and turn on your phone you will see boatloder screen as soon as grey screen appears release the volume down button
now press the power button again and there goes the magic
marol2 said:
all you have to do is download the official rom extract it
find the file name RUU_signed.nbh and rename it LEOIMG.nbh
copy this file to a formated sd card now hold the volume down and turn on your phone you will see boatloder screen as soon as grey screen appears release the volume down button
now press the power button again and there goes the magic
Click to expand...
Click to collapse
This isn't a good advice; certainly not in combination with rom's who are not build for some aria devices!
arash998 said:
Thanks you sir
How could I find out which country my phone belongs to !?
Click to expand...
Click to collapse
Witch stock rom do you used fore the moment?
Hey Guys,
I initally bought my HD2 last December which has 448mb of RAM which looking at the packaging was made in Tiwan (REV:A). After smashing last month my insurance company decided they was going to send me a new HD2 now it came with 1.66 installed but never decided to look at ram size but after upgrading to latest stock rom 3.14 it has 576mb Ram is this because i have HSPL2 on the device or have HTC decided to enable the "locked" ram?? I also noticed the stock rom came with Radio 2.15 which i was supprised about seen as most people won't need to **** around to get android running. This is REV:B made in CHINA also seems to have a different type of screen in it. Is this already know what i've mentioned or of any interest to anyone.
If you install the latest stock ROM 3.14 over HSPL you will see that your device indicate to have 576MB of RAM.
But at the same way you will only have +/- 50MB of free program memory!
So best is to remove HSPL and reinstall Stock ROM 3.14 without HSPL.
Hi,
I have the offical HTC Rom 3.14.405.2.
I have been trying various Radios to unlock the hidden RAM. I have found that Radio_2_07_51_22_2 unlocks the ram, and allows me to run all my applications without memory issues, and don't have to use ClearRAM.
I tried other newer radios, which lock the RAM, giveing me grief.
The problem is I cannot run Android SD Builds using Radio_2_07_51_22_2.
Any ideas on how to get around this, without using Custom ROMs, as I have not found one I like yet.
dilse said:
Hi,
I have the offical HTC Rom 3.14.405.2.
I have been trying various Radios to unlock the hidden RAM. I have found that Radio_2_07_51_22_2 unlocks the ram, and allows me to run all my applications without memory issues, and don't have to use ClearRAM.
I tried other newer radios, which lock the RAM, giveing me grief.
The problem is I cannot run Android SD Builds using Radio_2_07_51_22_2.
Any ideas on how to get around this, without using Custom ROMs, as I have not found one I like yet.
Click to expand...
Click to collapse
Sir, first of all if you run stock ROM 3.14 you need to remove HSPL from your device. Reason; HSPL in combination with stock ROM 3.14 coust problems and gives you a limitation of +/-50MB of free program memory.
Secondly stock ROM 3.14 came with the 2.15.50 radio who will deblock the extra ram if you used a custom rom with that option ore a Android NAND build.
Thirdly don't use/install a other radio on stock rom 3.14 (you need HSPL for changing your radio, and like mention before HSPL isn't compatible)
fourthly , Radio 2.07.51 don't unlock the available Ram, it's because you used HSPL in combination with stock ROM 3.14 who let see you these error.
fifthly, Yes, stock ROM 3.14 with his 2.15.50.14 radio will unlock the Ram on a custom ROM; but Stock ROM 3.14 isn't compatible with Android NAND.
PS; this thread belongs to the "HD2 Windows Mobile 6.5 Q&A and General" thread section, so we will ask to move it there.
I flashed the ROM with HSPL 2.08, and it is still on there, along with the 3.14 ROM.
dilse said:
I flashed the ROM with HSPL 2.08, and it is still on there, along with the 3.14 ROM.
Click to expand...
Click to collapse
Like mentioned previously, stock ROM 3.14 and HSPL aren't compatible. So remove HSPL and install stock ROM 3.14 again.
3.14 not for my device
Thanks for your advice so far...
more problems...
As my device is a T-Mobile UK device, I had to use HSPL to get 3.14 on in the 1st place.
What is the best way to get 3.14 on without HSPL?
dilse said:
Thanks for your advice so far...
more problems...
As my device is a T-Mobile UK device, I had to use HSPL to get 3.14 on in the 1st place.
What is the best way to get 3.14 on without HSPL?
Click to expand...
Click to collapse
Don't understand way you had need of HSPL, I mean the T-Mobile UK branded device have also received a 3.14 stock ROM update. (RUU_Leo_S_TMO_UK_3.14.110.1)
You can download the RUU_Leo_S_TMO_UK_3.14.110.1 here
So first remove HSPL and install than the stock ROM.
Or easily'er, just flash the right stock ROM over your SD-Card (this will remove HSPL during the installation).
Thanks, but I did not see that on the HTC UK site.
I will download and try.
dilse said:
Thanks, but I did not see that on the HTC UK site.
I will download and try.
Click to expand...
Click to collapse
Can happens sir.
Thanks a lot for your help, all is resolved now, I am on 3.14 Stock ROM, without HSPL, and Android on SD works, as well as having my full 576MB RAM.
dilse said:
Thanks a lot for your help, all is resolved now, I am on 3.14 Stock ROM, without HSPL, and Android on SD works, as well as having my full 576MB RAM.
Click to expand...
Click to collapse
Happy to see/hear that.
Enjoy.
I'm using 15 Mar Energy Rom Cookie 2.0.
My problem is: RAM SIZE = 448mb and NOT 576mb...
I'm using RADIO 2.15.50.14 of Ship rom.
Somebody know how i get full memory (576) on Energy Rom?
Don't mistake total useable ram with total hardware ram.
576 total minus 128 for the graphics chip leaves 448 for winmo to use.
If you were on standard rom it would be 448 minus 128 leaving 336 for winmo.
You must already have a correct radio else the rom wouldn't boot.
When i flash ORIGINAL ROM, PHONE INFORMATION show 576...
When flash Energy, show 448...
why?
Filipeknot said:
When i flash ORIGINAL ROM,
Click to expand...
Click to collapse
3.14 rom with 2.08.hspl by any chance? 576 total ram, 200 useable, plus unstable phone?
When i've flashed original ROM, i had the 1.66 HSPL!
To flash energy i'm using HSLP4.
Screenshots please, and which stock rom?(full filename please) and you can't say " I used 1.66 hspl for this and hspl4 for that", it makes no sense, hspl4 includes 1.66hspl, so it tells us nothing, a bit like saying "I go to work in a Honda, but i come home in a car",, both mean the same thing.
I've no screenshots...
Rom name: RUU_Leo_S_HTC_PTG_3.14.410.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Thread: http://forum.xda-developers.com/showthread.php?t=611787
Link: http://94.136.51.200/download/RomCo..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
With this rom, phone information show 576mb! By default, my HSLP = 1.66. To flash energy, i've flashed HSPL4.
My phone is a WWE and i've instaled this PT rom. If you don't believe, try yourself!
Sorry for English and thx for help!
Filipeknot said:
I'm using 15 Mar Energy Rom Cookie 2.0.
My problem is: RAM SIZE = 448mb and NOT 576mb...
I'm using RADIO 2.15.50.14 of Ship rom.
Somebody know how i get full memory (576) on Energy Rom?
Click to expand...
Click to collapse
You need to have 2.08HSPL for 576 RAM.My guess is that you have 3.03HSPL.I also use Energy ROM and I have 576 RAM.
You say " default is 1.66 hspl, but you cannot run 3.14 roms on 1.66, you get memory errors, and the rom update code error was you flashing the wrong rom from SD car.
Giraff -> I will try it!
Samsamuel -> I'm having memory problems, and i didn't know why this...
Now i know! =] kkk
With 3.14 and HSPL 1.66 sometimes when i open cam, memory error.
Thx for help Giraff and Samsamuel
I will come back later to give feedback.
>edit
I've flashed 2.08 and it's OK!
See attachment! 576 of ram!
Thx Giraff and samsamuel
Hey guys, my HD2 running wm6.5.3 has a ram problem. The problem being that i can have 100mbs of free ram and i tells me that an app does not have enough memory to start. This really limates my multitasking ability.
rom version?
spl version?
if rom version is 3.14, spl MUST be 3.03.0000 or 3.03.hspl, otherwise ram problems.
samsamuel said:
rom version?
spl version?
if rom version is 3.14, spl MUST be 3.03.0000 or 3.03.hspl, otherwise ram problems.
Click to expand...
Click to collapse
I'm running a 3.14 rom and 2.08 hspl. My hardware specs show 576 ram. If i flash 3.03.0000 or 3.03.hspl, the hardware specs then show 448 ram. What's up with that?
Regular hd2 only has 448meg by default, the 576 is only unlocked in certain rom spl radio combinations.
You cannot have more then 32 processes running at the same time.