After update to android 2.1 my phone isn't showing splash screen (and I know that I'm not alone whit this problem).
So my question is :
Were splash screen is stored in our GT540?
In G1 there are splash1 and splash2 and you don't see them in /proc/mtd - maybe we have something similar but i don't know how to find it:/
Any ideas ?
Yeah it would be interesting to know about this. I never know what's happening when the phone is booting
any news or solutions regarding blank splash screen issue android 2.1 update gt540 v20?
I would like to know this too, don't really want to have to flash back to 1.6 and try again.
I have ever heard you can flash splash screen with fastboot.
Code:
Fastboot flash splash1 filename. img
Search in xda, spla**** splash generator.
Joost
Sent from my GT540 using XDA App
Related
I have read much of the splash screen thread, but still have some questions. It seems as though there are a lot of different splash screens based on where in the startup process you are. I have never managed to change the Energy ROM splash screen I once installed, and it shows at the very beginning when I start the machine. This I installed through "Custom_RUU". Recently I installed "silentP Splash Screen" through a cab and that only put a picture up later in the startup screen, but did not change the Energy ROM splash screen in the beginning.
I would like to have the "silentP Splash Screen" as my only splash screen and to have it shown in the very beginning. How can I do this?
'splash.nb' Something you have to flash to your ROM.
there is only one "splash screen" this is the first one you see when u switch ur fone on that says touch pro ... this is stored on the devices ROM so to replace it, a new one has to be flashed, the other 2 the animated HTC one can be easly replaced by replacing the Animated.gif file in the windows directory the same goes for the windows loading screen, just replace welcomehead.192 and to replace the sound just replace BootUpHTC.wav
The very very 1st image has to be burnt into your phone similar to burning a ROM. Except that it only replaces the Splash Screen.
This link has a bunch of prebuilt splash screen to choose from.
http://forum.xda-developers.com/showthread.php?t=462668
I also built like 8 of them one day when I was bored.
http://forum.xda-developers.com/showthread.php?t=463046
Hello guys. Sorry about the new thread, I've searched for awhile and found nothing on this topic (perhaps and most likely searched the wrong words). I was wondering how do I change the bootup picture? Initially, it was the at&t logo (which I still don't want). Now its this TPC grayish ROM logo. Is there a way I can change it to a picture of my girlfriend? Just to clarify, I don't want to change the splash picture. I want to be able to change the boot up picture that shows your radio version. Well, take care guys. Thanks.
i would believe that to be the splash screen, search this in the raphael theme and apps section for the "how to"
superchilpil said:
i would believe that to be the splash screen, search this in the raphael theme and apps section for the "how to"
Click to expand...
Click to collapse
I think he is talking about the startup picture after the boot animation. If so I believe that is just a wallpaper. Change it in your ROM to whatever picture and it should solve your problem.
The first image is splash then animated then welcomehead.
PatchSplash v0.1 - flash custom splash screen w/o old splash at the bottom!
You have to patch the splash due to there otherwise being a gap @ bottom the link above has all steps.
All this is covered via using the search.
On that note thread close.
I am trying to make some changes to an existing rom. I flashed but it gets stuck on the splash screen. Is there a certain thing that causes this. I have the DangerSpl, and I didnt modify too much of the rom. Anything I can do?
[Nevermind, I figured out the problem...]
What was the problem?
Looks like it was a faulty boot animation
Hi I am very new to these forums and the HD2. Today I decided to hspl3 my device and it was successful and i also updated my radio to 2.12.50.02.2 from 2.07.51.22.2. With all that i decided to run android froyo sense v2.4 by run the clrcad and haret. Since i started the haret the phone showed a little text at the top then the HTC Logo (green on black) has been there for 30min +. I dont really know if its supposed to do that as ive seen videos where it has the linux penguin at the top with text.
(As im not really familiar with terminology) is running android flashing or something else? I would also like to know if i have done something wrong as i really would like to run android on it.
Thanks if you can help figure out what ive done wrong.
+ i don't know if this helps but would i have to have a custom rom to use android?
1st- No .. It's not mandatory to flash a custom rom (But it's Recommended)
For the Android, Did you change the included kernel ? Because sometimes it may make android not to boot .
But if you copied Android folder as it is then try to format your sd card then delete the "Data.img" created inside Android folder and try again .
hey, i dont wanna warum up this theme, but before i start a new thread i rather post in a thread that is about the same problem ^^
(in first of all, im german and my english is good, but not the best ^^ so im sorry for some incorrect sentences or sense )
im also having this problem around 2 weeks...
im using this rom
http://forum.xda-developers.com/showthread.php?t=692763
Omega v3.4
with the Radio-Rom
Radio 2.10.50.28_2
and as you may think, my handy stucks after the executes linux code on the green HTC Logo. No one could help me, so im asking for the pro's in this forum for some answers.
Is it may possible, that every 3.14 rom makes problems with android?
so, thanks
and i hope you could help me, solve this problem
greez
Monolize
me too i am stuck in the htc logo for 1hr now and nothing has happen.
me too .. it stuck at HTC logo Rom 3.14
Hello everyone,
I've searched everywhere I can think of to figure out how to solve my problem, and I assume the answer is hiding in an obscure part of an earlier thread on these fora. I was able to root my L9 P760 running Android 4.1(Jelly Bean) and from there naively assumed I could flash the recovery using ClockworkMod. After rebooting I've been getting the infamous "Security Error" screen. I've been able to get the "S/W Upgrade" screen, but that's as far as I got. I believe this means the bootloader is locked.
I followed a lot of instructions I found including using fastboot via omap4boot(http://forum.xda-developers.com/showthread.php?t=2119090) and the offline kdz flash(http://forum.xda-developers.com/showthread.php?t=2085344), but without luck. Fastboot would cause the phone to reboot, losing the "S/W Upgrade" screen and the kdz method would stall at 4%, leading me to find out that the phone needs to be in the "LG Update" USB mode, which I can't achieve because it won't boot.
I have two Macs running OS X 10.7 which can dual-boot into Windows 7. All software is up to date. I have experience using the command-line.
I hope there's a solution to this, and I hope that posting this here can help others avoid this problem in future.
Thanks in advance,
Pieter
Edit: I finally managed to flash a stock version of recovery, the x-loader and u-boot for Jelly Bean using the fastboot script from here. For those in a similar situation, I set the driver for the OMAP4xxx device which goes under TI devices(or something like that) and then I had to set the driver for a device called LG P4(or something, I didn't take a screenshot). I was then able to use the stock LG Mobile Support Tool, via the "Recovery Phone" option, to restore the newest version. However, it still won't boot properly. I get the LG logo when turning it on, and then the animation with the LG logo with the shiny effect on the smiley face keeps running in a loop. Is this the boot loop problem I've seen people asking about? How do I access recovery(and would that accomplish anything)? Any help would be appreciated.
Edit 2: I think I fixed it! I'm just documenting what I did to be helpful to other people. I had tried to do a hard reset earlier, but it didn't work. I tried it just now, and it worked, I got an droid with a progress bar underneath. Then it booted, and I heard the startup sound which I didn't know I was missing. I would still like to know in detail what I did wrong, and what I did right, and why it was right. Thanks in advance.
Simple, you probably did nothing wrong. Things just happen. I had this happen to me once. Security Error
However, I didn't install a custom rom or recovery img. All I did was flash a different kdz version (for my device). So my guess is that the boot img or other img, got corrupted.
I fixed my issue by flashing x, u, boot, recovery all in fastboot. Then I ran the flash update program again and it worked
Sent from my LGMS769 using xda app-developers app
dont know how to unbrick my lg [NEED ANYONE'S HELP :'( ]
hi,im new here...i have softbricked my lg l9 p768e last week. and i found this thread. i want to try using this method, but always stuck when launching B2Capp.exe. it appeared and gone like nothing happened. by the way, i cant get into CWM through my phone. somebody help me!!! i dont know what to do now...
sorry for broken english.
faizin.alfateh said:
hi,im new here...i have softbricked my lg l9 p768e last week. and i found this thread. i want to try using this method, but always stuck when launching B2Capp.exe. it appeared and gone like nothing happened. by the way, i cant get into CWM through my phone. somebody help me!!! i dont know what to do now...
sorry for broken english.
Click to expand...
Click to collapse
How do you brick your phone. Did you try to hard reset it? Did you try offline flash or LG mobile support tool to recover your phone?