[Q] Not sure what to do.... - Vibrant Q&A, Help & Troubleshooting

I am running Bionox 1.9 w/Jac's Kernel. I haven't changed anything that I'm aware of, but I noticed that when I was done charging the phone on my USB dock at work that when the screen timed out, the phone shut off. If i keep playing with the screen and keep it lit up so to speak, it stays on. If I hold the power button for about 10 seconds, it will come back on. I'm pretty sure this happened before I ran the GPS update from the market which came out earlier. I booted into recovery and wiped battery stats thinking that might help, but no luck. Can anyone help me?

Are you overclocked? If so you may need to turn down the maximum setting or turn up the minimum setting using set cpu. Also make sure that scaling is set to conservative.

I did change that, and it didn't seem to make a difference. I realized later that I had downloaded the GPS fix from the market, but like an idiot I was inside and it couldn't pick up any satellites. I tried later and kept getting an error message saying it had failed again. I went back to the market and removed it from the phone since I couldn't find it in ASTRO or anything like that. I eventually found the dead folder and deleted it. Problem solved so far. I'm now unsure of two things.....1: Why didn't the folder get deleted when I removed the APP? 2: Why didn't the GPS fix work? I tried searching with the exact words from the earlier posts, but it says that APP is not found. I haven't really been having big problems with GPS, except it shows me being adjacent to a highway, when I ACTUALLY on the highway. Other than that, it's been ok. Any other suggestions you guys may have? By the way, I hope I have this in the right forum, because I would still say I know way too little about these phones to tinker around without everyone here's support. I would hate to get flamed here.... See it way too much. But I see everyone's point.

Related

new Sprint ROM a disgrace!

Well I loaded in the new sprint rom last night, and now my phone is completely useless. The radio has major problems, my signal goes from nothing to 4 bars, back and fourth, and the phone goes into permanent sleep mode when I let it sit. I found this out when I woke up this morning and missed 10 calls from a client havign an emergency overnight... wonderful. I have it sitting here on the desk, and it will go to sleep and require a reset every hour or so.
I haven't had any of those problems.
WM6 lag is basically gone now and the keyboard lag is gone.
Everything is WAY more responsive and the memory leaks seem better so far.
The memory "leak" / Cacheing is more managable, and the device isn't as laggy.
I've had no problems at all. I'm loving it.
cbunting said:
Well I loaded in the new sprint rom last night, and now my phone is completely useless. The radio has major problems, my signal goes from nothing to 4 bars, back and fourth, and the phone goes into permanent sleep mode when I let it sit. I found this out when I woke up this morning and missed 10 calls from a client havign an emergency overnight... wonderful. I have it sitting here on the desk, and it will go to sleep and require a reset every hour or so.
Click to expand...
Click to collapse
my MOGUL also goes into Perminant sleep if I let it sit.
i've had to take out the battery about 4 times just today.
anyone know why this could be?
Me too
Got the same problem installed last night. Woke up got into the car and checked phone sleeping had to soft start. Then same thing at least 3 times today. Also watched a short video in MP and it was show a few sec then sleep. Soft start and then you could watch it. Seems like after being on for a couple of hrs phone runs out of memory or something a freezes up?
claude9039u said:
Got the same problem installed last night. Woke up got into the car and checked phone sleeping had to soft start. Then same thing at least 3 times today. Also watched a short video in MP and it was show a few sec then sleep. Soft start and then you could watch it. Seems like after being on for a couple of hrs phone runs out of memory or something a freezes up?
Click to expand...
Click to collapse
Check your power setting setup, maybe it's set to turn the device completely off after 1min etc... For some reason my phone never shut off even if I let it set idle for more than 30 mins like it was set to do. Perhaps with the ROM update it actually does what it's supposed to now. Just an idea.
it's not supposed to TURN OFF as in shut down, it's just supposed to sleep. and it never comes out of sleeping mode. i've had numerous other problems, with bluetooth, etc... going back to Colonels rom, which was much more dependable.
cbunting said:
Well I loaded in the new sprint rom last night, and now my phone is completely useless. The radio has major problems, my signal goes from nothing to 4 bars, back and fourth, and the phone goes into permanent sleep mode when I let it sit. I found this out when I woke up this morning and missed 10 calls from a client havign an emergency overnight... wonderful. I have it sitting here on the desk, and it will go to sleep and require a reset every hour or so.
Click to expand...
Click to collapse
i too loaded it yesterday as well, but i want to wonder if you did a hard reset before you installed the rom. i did it, and it gave me no problems at all with radio version 1.47.00... oh, and the phone automatically cuts off when the alarm goes off while you charge it overnight (a big no-no, but you probably know this as well, but i ain't mad at ya). if you got anything, feel free to PM me. thanks in advance.
Thesian said:
The memory "leak" / Cacheing is more managable, and the device isn't as laggy.
I've had no problems at all. I'm loving it.
Click to expand...
Click to collapse
Mine's still leaking, badly too.
Any of you try to use BT on this new rom?
If you did you'd know that this rom is worthless
-mark
The culprit appears to be the 1.47 radio. The 1.47 radio coupled with any rom version will experiance sleeping, bt and other problems.... so I am rolling back to 1.40 radio to see how it acts
As a tech in a corporate sprint store, i'd be interested in the details behind this "sleep mode" issue. What are ppl running? How can I, in the store, reproduce the problem? Is it reproducable on command or guaranteed, or is it hit or miss?
As I've said, I have the new Rom and Radio, and have no new issues, and the memory "leak" / cache issue isn't gone, but its definetly not as bad, the OS even seems to have a SLIGHTLY smaller ram foot print... maybe just a few megs smaller, but smaller on my device.
cbunting said:
The culprit appears to be the 1.47 radio. The 1.47 radio coupled with any rom version will experiance sleeping, bt and other problems.... so I am rolling back to 1.40 radio to see how it acts
Click to expand...
Click to collapse
I tried that. The 1.40 radio with the new ROM still had all the new bugs.
D-pad cutting in and out...
I have found that if I push the power button to put the phone to sleep when it stops working, then turn back on, the d-pad works again. This seems to get it back to working. I wish that they could just get it right...
Jim
How do you get the new ROM?
I haven't updated yet, plan to over the weekend, but I would suggest anyone having problems to stop and consider their setup first...
What programs are installed that could cause problems?
What registry hacks have been done that may cause problems?
What configuration settings might need reset that may cause problems?
For example, after a hard reset, Enhanced Network over USB is enabled by default, and this often causes Active Sync to have issues. Likewise, power management tweaks will have reverted to defaults and you may like a more finely tuned setup.
As for memory leaks being better/worse, you may have programs installed that are out of date/buggy.
I realize it's easier to jump on the "this sucks" bandwagon, but it doesn't help you or other users with legitimate problems when no consideration is given to what is causing a given problem.
These situations are precisely why the instructions tell you that EVERYTHING will be erased. This is a good thing since it forces you to clean house, but it also means you have to pay attention to those things you often neglect or may have changed ages ago and forgotten.
Finally, if all else fails, try the ROM update again. Sometimes things go wrong.
Sorry if this seems like a rant, I just want people having issues to place blame where it truly belongs. After considering these matters, if you still have problems, definitely let HTC and the rest of us know.
Best Regards,
Aaron
Sorry, it's not anybody's installed programs. The bugs show up with nothing else but the bare ROM.
It's a train wreck.
There are more details on ppcgeeks and pdaphonehome -
http://forum.ppcgeeks.com/showthread.php?t=10366
Basically, on a stock ppc-6800 phone with nothing else installed, the BT keeps shutting off.. For me whenever a call comes in or after using my headset for a few minutes on an outgoing call...
-mark
Clean rom, nothign changed at all, it sucks, clearly. We are the beta testers obviously, as usual, with most products today
I installed the new ROM after backing up with SPB Backup, then installed my backup file back on and I haven't noticed any issues. I don't use bluetooth however, so I can comment on that. But, I haven't had the sleep issue others are describing either.

[Q] HD2 turns off automatically!!!!!????

HELP!!!!!! My HD2 turns itself off automatically after about 15-30 minutes of running Android OS. I have HD2Froyo_V2.1.7z. Also installed HSPL3_PKG from XDA and Kumar's TMOUS C5 Premium V2.6. I solved my robot voice and no sound problem. Only thing left is getting it to actually stay on while running in Android. Any help would be greatly appreciated!!!!!!!!!!!!
Hi I have a similar problem. It happens only when I have the phone in my pocket.
My theory is that I press the shutdown button when held in the pocket and thereby turns off the phone. The best thing would have been if the feature was removed when it is in the locked position ... Do you think we have the same problem?
I'm running Duttys rom (v8) and radio 2.10.50.28_2 (HSPL 1.66)
No clue....?????
I am very new to the whole "hacking my phone" scene, if you will... I was pleased with myself for actually getting it to boot and run for a decent amount of time. My phone will just cut off (when im running Android OS), when it's in my hand, when im playing a game, when im doing just about anything in Android. It works perfectly fine in Windows, no probs what-so-ever. I had an issue with connecting to T-Mobile's 3G network, but i think i resolved that. For the most part everything works great, only prob is that the phone just resets on its own. Still very confused as to why..... HELP!!!!!!
I'm no expert on this either. Your problem sounded exactly like mine, just had to ask if it could be so in your case also.
You know what they're asking for technical support? Is the power cable in? Hehe, sometimes it can be very simple things that are wrong.
One thing that struck me was that perhaps you should look over the radio version. There are a few threads on XDA about different radio versions work with android.
Consider what I wrote at the beginning, I'm no expert
Alright. do this and it will work.
1. format your card with your phone to fat32. you need to do this. (yes again)
2. HPSL3 your phone, it seems that once you do it you wont have to do it again but this are the exact steps I did before getting the hd2 android for more than 72 hrs using 99% of the phone. (remember it is always better to have stock android)
3. I am using Chucky ROM but is HORRIBLE ugly and nasty. ROM your phone to Chucky rom or Miri Rom.
4. get Matt C Froyo version of android.
Install it. reboot. tap on CLRAD and then HRET and it will work.
I have an auto loader now it seems they all work but some are nicer. oh by the way you will use your SD card as it was th phones memory with this build, meaning the Windows version of the HD2 is safe for when Windows 7 gets a release and you decide to send to hell android as I will.
I was wondering if anyone found a solution yet for disabling all buttons except the unlock button.. this is the reason why I have been calling ppl without actually noticing I pressed keys while my phone was in my pocket. also it has shutdown few times. sucks because I miss calls that way.
HectiQ said:
I was wondering if anyone found a solution yet for disabling all buttons except the unlock button.. this is the reason why I have been calling ppl without actually noticing I pressed keys while my phone was in my pocket. also it has shutdown few times. sucks because I miss calls that way.
Click to expand...
Click to collapse
I would really like to have a solution to this also. The problem is that you get an option to switch to airplane mode or turn off the phone when you long press endbutton. Even if it is locked. I want to see that when you are only in unlocked mode, the shutdown menu shows. I really hope someone fixes this.
thanks for your help, i tried doing this but that didnt help, i flashed my rom with the energy rom and the lastest mdeejay froyo 3.4. Is there a way i can fix the phone shutting down itself? to turn it back on, i have to take the batter out and turn it back on all the time.
any help pls?
Hi, i seem to have the same problem, android works perfectly when all of a sudden with no reason my phone reboots to winmo. And it has nothing to do with pressing buttons. I have it on a desk and it shuts down. I have noticed that it varies from build to build. Mmce v2.0 would cut down every few seconds. Mdeejay's builds were the most stable, but had no camera. The one I'm using right now "bangster's 1.5" with camera shuts down 1-2 times per day. I can live with that for now. PS: I would like however to thank all the developers for their hard work.
Sent from my HTC HD2 using XDA App
Have you tried running a non-undervolted kernel? Both Hastarin and Michyprima offer non-undervolted alternatives.
http://forum.xda-developers.com/showthread.php?t=787588
Release r7.1 Alternative - as above but without Overclocking, Undervolting, or AXI. NOTE: requires nand_boot=0 in your startup.txt cmdline, see README.txt for details.
http://www.multiupload.com/23ADQU06GU
Click to expand...
Click to collapse
Brgds... /Tubgirl
hd2 turns off I have a solution
first off this isnt a software issue at all. with much time devoted to figuring out the problem with my hd2, it randomly shuts off whenever it wants...well its simply a hardware issue. but nothing to has to do with overheating or anything like that. the battery pins are very flimsy and loose connection to the battery itself very easily. use a piece of paper and make sure its the length of the battery. and fold the paper to create a wedge in the top of the phone and the battery. place the paper wedge halfway in front of the battery as you are putting it in the phone and then gently force the battery into to place. this will create a secure connection between the battery and the pins. i promise it'll work...its just to keep the battery from bouncing and loosing connection.
its just a poorly designed battery casing not being snug enough to hold a connection with the battery. let me know if you are confused on how to do it or anything.
I'm having similar issues and I'm almost sure it's overheating.
Install Hastarin's 7.7alt version kernel which isn't overclocked on startup. This will make your phone a lot cooler after booting. Then install SetCPU and current Widget.
run SetCPU and set a profile to clock down the CPU (245-400mhz) when the Temp is above 98 degrees and to give you an Audible beep
run Current widget and pay attention to the temp. then run something like angry birds that will heat up your phone.
If it crashes at a certain heat, set SetCPU lower.
Another method to diagnose is to run Angry Birds like normal and see how long you can play before it crashes, then put some ice cubes in a double plastic bag and hold it against the lower back of the phone while you play again (after reboot of course). See if you can play longer.
I'm trying to figure out if the HD2 is still under warranty because this is a huge hassle.
EDIT: Just got off the phone with HTC TmoUS repair division and the phone is still under warranty and will be repaired at no cost except one way shipping. I'm going to stress test it in WinMo to make sure they will be able to replicate the problem and I'll ship it tomorrow. I just need to find something that's as CPU intensive as Android.
Does anybody have a solution to this? None of these answers work.
Automatically reboots
I have similar problems with my T-Mobile HD2; it was fine when I first got it (I lined up before the store opened on the day it came out) and am not running Android. It will periodically turn off and go back on again for no reason. I read somewhere that old SIM cards could be a problem and was wondering whether this was the issue as my SIM is more than 10 years old.

[Q] Android FRX04 Screen Issues

I would have posted this in the developments forums, but since im a new member, it wouldnt allow me. Heres the issue:
Running FRX04 android on my Sprint TP CDMA works great, except at random times the screen will become off center and shift to the left. At one point it became so garbled with lines it was unreadable, but came back to normal as I kept tapping the screen. Its almost as if the refresh rate is incorrect. Anyone ever had this issue?
Also, screens touch calibration seems to be off, any way to re-calibrate like in WM?
Thanks in advance!
Have you updated any of the files like the rootfs or the kernel package? Also, you will need to read the first post in THIS thread and replace the file either in the root of your microSD or if you are using the andboot option, in that folder.
R^7Z said:
Have you updated any of the files like the rootfs or the kernel package? Also, you will need to read the first post in THIS thread and replace the file either in the root of your microSD or if you are using the andboot option, in that folder.
Click to expand...
Click to collapse
Fixed the problem a while back, was related to the kernel, had to switch to a different one. Now everything works great, almost.
Although it is very usable, my problem has been that when when the phone goes to sleep, it will keep the backlight on for a period of time with the screen black. Then at some point the backlight will turn off, i assume a deep sleep. When this happens the phone is completely unresponsive, however the leds around the center button fades as if its charging. Only a soft reset will work.
Thanks again.
I usually don't enable auto back light because that is still being worked on if I'm not mistaken. Instead, I turn off the screen manually. Usually helps to enable pattern lock, for me anyway. Make sure you are updating as there has been some recent updates as of late: FRX05.
n-Joie (Enjoy)
ill give that a shot
​I disabled all backlight features in WinMo and Android and everything works perfect. Thanks. However my GPS has never worked, just says aquiring until it times out saying that it couldn't find any satellites.
I believe GPS is disabled by default. This may or may not be listed as such but I think I recall reading this somewhere (maybe IRC logs?). Unfortunately, this is something the devs are still working on and hoping someone "fixes" it eventually...
Im not worried about gps at all, if i need it I can use WinMo. Been using android exclusively on my TP for 2 days now and it works great. Battery life is great too.
Have you tried out the camera yet? I tried it out the first time yesterday and I was stunned! Don't think I ever saw the camera work in Android before so to say the least I smiled when I tapped the camera icon and saw what the camera was pointing at... Even though it seemed like it hung after it took the picture, I may have been a tad impatient with it at the time as I was slightly excited!
Very nice!
I have not tried the camera yet unfortunately. I will right now and post back. Ive had pretty low expectations so im not like others and complaining by any means.
Additionally, it helps to have that sort of mentality. Not required but by all means it does help to be helpful!
R^7Z said:
Additionally, it helps to have that sort of mentality. Not required but by all means it does help to be helpful!
Click to expand...
Click to collapse
You cant expect too much when your running a non-native os on an unsupported device. I used to be a big member of the xbox dev forums back in the day. So i can understand the users that complain when things are in alpha stage. I guess I can start posting in the development forums now that im over 10 posts.
My camera didnt work when I tried it by the way. black screen area then showed a crash message. Like I said no big deal, usability I would say is still excellent. If i need to use gps or camera ill just use winmo till then, no biggie!
jasew503 said:
Fixed the problem a while back, was related to the kernel, had to switch to a different one. Now everything works great, almost.
Although it is very usable, my problem has been that when when the phone goes to sleep, it will keep the backlight on for a period of time with the screen black. Then at some point the backlight will turn off, i assume a deep sleep. When this happens the phone is completely unresponsive, however the leds around the center button fades as if its charging. Only a soft reset will work.
Thanks again.
Click to expand...
Click to collapse
Could you explain how you fixed your screen issue going off center and shifting to the left...I am having same problem
I downgraded my kernel. Can't remember which one I used in frx04 as I lost my SD card with 04 on it and have since been using FRX05 which worked as downloaded with no changes to the kernel needed. If you look at the FRX04 thread in the beginning, there is a reference to Touch Pro users having to use a different kernel (1225 I think), and I just down,loaded it and extracted it overwriting the kernel that came with FRX04. I haven't tried FRX06, but tried the GBXOA gingerbread bundle today on another SD card and it seemed too buggy for my liking, crashed in the XDA Dev app while trying to reply to your post. Sure loos and flows nie tho. Try using FRX05 or 06, rather than 04..
Sent from my MSM using XDA App
The kernel I replaced it with was 1242 btw
Sent from my MSM using XDA App

Need advice with a new device

So I recently got my old bricked evolte replaced by Sprint. The one I was given worked fine the entire time the device was powered on. However, once turned off and back on, its screen would not work. It stayed like this for hours, until I finally started playing with it and realized it would come back on after playing with it for a little bit. I also found out that with this error the home screen pops up for a second when powering on your device, and that's exactly what I had. I read up on the error and found out it was a software error, and to reset to factory settings. So, this fixed it, I thought.
So now, after it is apparently fixed, it still does this to some extent. It will do this if the phone has been powered on for a while, and the screen won't stay off for more than like 2 or 3 minutes. Also the home screen doesn't pop up any more like it used to with the other error.
So what should I do? I was thinking of going to Sprint, but my problem is hardly reproducible. It only happens when it's been powered on for a long time, and won't do it twice in a quick succession. I feel that even if I could show them the problem, they might think they've fixed it when they haven't because it won't do it twice. I would like to root my device, but I'm afraid they're going to say that I'm the cause of the problem if I do that. If it's just a software problem though, maybe flashing a custom rom would fix the problem.
What do you guys think? What do you think is the best course of action? Any advice would be greatly appreciated. Thank you.
Never mind, I didn't know Sprint would order you a new phone if it was a minor problem like that. I thought they would only repair yours. So feel free to close this thread.

Pry-Fi has destroyed my wifi!

Unfortunately, on my stock, rooted Sprint Galaxy S5, this app completely destroyed my wifi. Probably because I used it wrong somehow...I have tried the fix posted here:
http://forum.xda-developers.com/showpost.php?p=49978258&postcount=102
several times, but my WiFi will not even so much as turn on. I'm sorry to ask this of you guys, but I am not sure what else to do besides flash another ROM. I'd rather it not come to that. If you could think of some way to troubleshoot this with me or if you know an alternate solution, I would be forever in your debt.
If I try to slide the wifi switch from "off" to "on" it just sits there grayed out for a bit then switches back to off.
Edit:
As an update, I just did a system restore and that did NOT fix the problem...a bit freaked out now.

Categories

Resources