Alright.. was half asleep and put the i9000 on my t959. Used odin, re-part'd, the whole nine yards.
Obviously, i can not root it using the update.zip method. When in recovery down is up, up is down, and power button does NOT select. So i can not apply it. I am quickly learning everything i need to work on this. However, I need some pointers, maybe hints on where to proceed to get this back to at least a semblance of "working". I tried to flash back to a standard rom, and i get constant recovery-boot screen. Odin back to the i9000 and at least the phone boots fully.
I need to get this back to at least a semi-original rom so I can root and apply the correct t959 build to the phone. Sooo... help a newb out. I have spent the last day and a half downloading trying various options, going in all directions, and getting nowhere. I have attempted to apply via Odin, and borked things up pretty good, but not so much I can not recover, just need some directions. I have just rebuilt my laptop to a standard XP Pro with all updates, and patches. Updated Java JDK, the Android SDK, and Kiess. I can attach and see the phone using ADB without issue. As best I can tell, i have a "clean" kitchen setup to do what I need.
Please help a new get his feet wet without drowning this time!
Thanks guys.
Help please?
CaSurfer said:
Alright.. was half asleep and put the i9000 on my t959. Used odin, re-part'd, the whole nine yards.
Obviously, i can not root it using the update.zip method. When in recovery down is up, up is down, and power button does NOT select. So i can not apply it. I am quickly learning everything i need to work on this. However, I need some pointers, maybe hints on where to proceed to get this back to at least a semblance of "working". I tried to flash back to a standard rom, and i get constant recovery-boot screen. Odin back to the i9000 and at least the phone boots fully.
I need to get this back to at least a semi-original rom so I can root and apply the correct t959 build to the phone. Sooo... help a newb out. I have spent the last day and a half downloading trying various options, going in all directions, and getting nowhere. I have attempted to apply via Odin, and borked things up pretty good, but not so much I can not recover, just need some directions. I have just rebuilt my laptop to a standard XP Pro with all updates, and patches. Updated Java JDK, the Android SDK, and Kiess. I can attach and see the phone using ADB without issue. As best I can tell, i have a "clean" kitchen setup to do what I need.
Please help a new get his feet wet without drowning this time!
Thanks guys.
Help please?
Click to expand...
Click to collapse
go into download mode by (with the phone off) holding down vol up and down and plug in usb cable. Then flash jfd (which is found in vibrant bible) stock firmware via odin.
shehrammajid said:
go into download mode by (with the phone off) holding down vol up and down and plug in usb cable. Then flash jfd (which is found in vibrant bible) stock firmware via odin.
Click to expand...
Click to collapse
This, just ODIN back using this link I guess:
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
Just make sure you DO NOT select repartition and take out your SIM card... You don't need to select repartition unless you really **** your phone up.
You guys are brilliant.... and i am sure a few hours sleep and some caffiene helped a lot as well...
Back to the stock t-mobile, no issues no hicups.
Been scouring the bible, and playing around with some roms. Using the search a lot better, thanks for the patience in a moment of panic.. you all are great!
Now to get back to trying and turn this thing into a real decent phone again
Time to feed the custom rom addiction some more!
i did the same to my t959
i did the same thing but it wont let me put the t959 into download mode, even when i hold both up and down and plug in the usb. Can you guys help me please.
nevermind found a way...
Dnice978 said:
i did the same thing but it wont let me put the t959 into download mode, even when i hold both up and down and plug in the usb. Can you guys help me please.
Click to expand...
Click to collapse
Did you put in the battery with the USB plugged in while you were holding the volume keys??
Whenever you guys figure this stuff out can you please post the solution. That way its here as a reference and people can learn in case it happens to them...
Sent from my SGH-T959 using XDA Premium App
HERE FOR THE REFERENCE IF YOU WANT TO FIX YOUR soft brick. (odin back with guide below)
http://forum.xda-developers.com/showthread.php?t=981522
it will give You headache from reading but ,the whole thread is about unbricking the phone .
Please help! What'd you do to get back into download mode? I can't get in with standard keys or using ADB. I'm really screwed here.
Zjunk said:
Please help! What'd you do to get back into download mode? I can't get in with standard keys or using ADB. I'm really screwed here.
Click to expand...
Click to collapse
isnt it JUST volume up OR down and power if you put i9000 on, not both volume buttons like it would be normally ??
volume buttons
I had the same issue with getting the I9000 bootloader, up volume, usb, battery gets download mode, battery in, volume down, power button gets recovery...
Zjunk said:
Please help! What'd you do to get back into download mode? I can't get in with standard keys or using ADB. I'm really screwed here.
Click to expand...
Click to collapse
volume up + power button...if your r using gingerbread bootloader
for froyo bootloader...make sure ur phone is turned off...
volume up + volume down then plug usb cable to a computer....
Dude, you are a lifesaver with the GB boot loader combo. I was ready to chuck this thing into the garbage. Thank you.
Related
I have never bricked it before, and I cannot go into download mode... I tried the the Vol up and vol down, didn't work, so I have been using ADB and just ****ed something up....
Now I need to know a way how I can revert back to stock, please and thank you, I will forever owe you one.
EDIT: Okay there is some confusion, to simplify it I will take it step by step:
I replaced an APK file from my system/apps and ever since it has been force closing process.android.acore, so I tried reflashing to stock, it froze while doing so now I have a picture of a caution sign, a phone and a computer coming up on my Vibrant, it will not start up.
It is hardware locked because I have never been able to access download mode via hardware keys(I have always been using ADB).
Is there any way I can reinstall stock? Or is my vibrant now destroyed?
what exactly were you doing when your phone stopped working? "just ****ed something up" makes it hard to pinpoint problems...
I don't know I replaced my phone.apk with another one then ever since then it keeps saying process.android.acore has stopped working. It wouldn't stop showing up so I tried to reflash with Odin to stock but it froze and now it is bricked.
bumping a little bit, I have never bricked it before so I have 0 experience.
What do you mean by froze? On what screen? How far can you get into booting?
bigragu said:
What do you mean by froze? On what screen? How far can you get into booting?
Click to expand...
Click to collapse
Alright let me start over with more detail:
I tried to replace the dialer so I replaced the phone.apk and then process.android.acore kept force closing so then I tried reflashing with stock, during that I don't know what happened but I think my phone froze, so then it shut off and turned back on, I only found a screen with a computer on it... I am assuming it is bricked.... I also know it is hardware locked because I tried going into debug mode with vol up and vol down, how can I unbrick it?
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
I am Also having this same problem
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
sheek360 said:
Try moving the stock rom into the phones internal memory via adb. And flash it after a wipe.
Click to expand...
Click to collapse
It isn't even being read by my computer... nothing...
sympala said:
I Flashed my Vibrant through Rom Manager to Froyo 2.2 from eugene373 and sombionix.
After flashing to both ROMS for Froyo I wanted to revert back to 2.1.
I tried to put sombionix 1.3 eclair ROM back on to my phone using clockwork mod.
The flash was not successful it stopped in the middle but the phone came on with a Force close error of an android process.
I tried to reboot through adb reboot recovery with usb debugging enabled.
The phone shut down like it would reboot into recovery mode and now it gets stuck on boot at the samsung vibrant screen.
I tried to use ODIN to flash back to the stock Rom but the phone is recognized in ODIN but will not flash.
ODIN sees the phone but will not get past flash analysis. (Sat for 8 Hours)
I believe this is the definition of bricked. Please Help!!!!!
Click to expand...
Click to collapse
Excuse me sir, make your own thread, don't jack mine...
Smokexz said:
It isn't even being read by my computer... nothing...
Excuse me sir, make your own thread, don't jack mine...
Click to expand...
Click to collapse
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
sympala said:
lol Sorry Smokexz didn't mean to jack your thread just trying to consolidate phone bricked threads. I will create my own NO PROBLEM.
Click to expand...
Click to collapse
Thanks, regardless both our situations are bad .
Please? I really need help with this.
Smokexz said:
Please? I really need help with this.
Click to expand...
Click to collapse
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
hourst2 said:
If there is an answer, which I am not sure that there is, it would be here: http://forum.xda-developers.com/showthread.php?t=782739. You may have already seen it, but if not it gives many different processes to try. Good luck!
Click to expand...
Click to collapse
Yep, I'm screwed thanks for the help though.
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
reinsert the battery whiles still holding down the volume up n down
plug in usb cord
it should put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
I am not sure if you can get in DL mode and it just wont let you do anything, but if you have already tried this my apologies.
gthmcty1 said:
Can you get the phone in download mode?
Did you try this:
Pull battery
hold the volume up and down
...
Click to expand...
Click to collapse
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Alright thanks
Sent from my Motorola_i1 using Tapatalk
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Your a dumb ass, His thing actually does work.. I was "hardware locked" like 5 times That DOES work, you sir are a DUMB ASS < Had to say it again
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
gravis86 said:
Did you even read the OP? He is HARDWARE LOCKED ie BUTTONS DON'T WORK geeze people learn how to read!
And on topic, if you can't ADB and you are Hardware Locked, you are SOL. Try to get an exchange from T-Mobile since it appears that they regard being Hardware Locked as a defect.
Click to expand...
Click to collapse
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
gthmcty1 said:
Wow you come in and try to offer up help and you get some one that feels the need to police the "suggestions"........ Have a coke and a smile my friend...and relax!
Click to expand...
Click to collapse
Not to mention that what that guy said actually works...
Some people just make me laugh
(Make sure that your USB is plugged into your computer & not your phone)
Remove the back cover & remove the battery along with your sim & micro SD
Hold the VOL Up & VOL Down
(Keep holding those buttons) Now insert the battery
Plug the usb into your phone.
It will put you back in to DL mode
Open ODIN and unplug phone from PC and plug back in hopefully it will notice it then.
^^Do that
after flash to stock,vibrant logo screen and this
1) http://goo.gl/ZkcfN
2) this is not android development. you'll likely get much better help in Q&A, and less flames.
Weird. Try taking out battery, plug in phone to computer with ODIN open, hold vol up + down and power, put back battery and let go of power. Should return you to Download Mode and you can just ODIN back to Stock JFD again.
This is some type of Download mode alternative. Do not worry, it will easily connect to your computer just like download mode would.
did you mess with the framework? I remember i did and i got that exact same screen, i can't read what the red text says but mine said blablabla.png missing etc.
I put it on download mode like the guy above me siad and odin'd.
upsalarunvk said:
after flash to stock,vibrant logo screen and this
Click to expand...
Click to collapse
dam dude how did you get that ...did you odin back to stock?
I have had that one ime before today, now 2nd time. First time I just kept trying the tar & pit files (the new set that started going around after people were on Gingerbread). I did write what files I used that worked. I was hoping to save time today so i came here to see if there's any mention of it. If wouldn't.mind posting the files you used that would be great.
I've been in so many different modes with this phone. The great thing is if you just keep trying you can get it back.
If anyone knows what files are bring the phone back from stuck at logo it would be appreciated. I know from what I've experienced just keep trying with safe flesh and eventually it works.
Sent from my GT-P1000 using XDA Premium Appr
I was trying to revert my wifes phone to stock and odin would not work. I used heimdell with the wrong file. The phone now has a i9000 interface. I cant call or text because it wants a sim card which obviously is impossible. and I cant get it in download mode to put the Fascinate interface back on it. Im an idiot!
Zerokillstreet said:
I was trying to revert my wifes phone to stock and odin would not work. I used heimdell with the wrong file. The phone now has a i9000 interface. I cant call or text because it wants a sim card which obviously is impossible. and I cant get it in download mode to put the Fascinate interface back on it. Im an idiot!
Click to expand...
Click to collapse
hey,
chill, user error happens. I know your wife probably can't see that right now but....
one time I did the same thing, sorta, and bricked and couldn't get into download mode. I couldn't get the phone to do anything, not even the charging animation. that is how you know its bricked.
it sat there unplugged and without a battery or sdcard for about 20 hours lifeless. I was in the process of ordering a new phone through insurance when I decided to hold my volume button down, plugged in and it was great!
once you get to this point, and you will if your phone is turning on at all its not bricked, then you will need to follow instructions for repartition like your coming off cm7mtd using a FULL BUILD like DI14 (I have a mesmerize so I'm not positive your full builds) with repartition checked using the atlas_2.2.pit file.
if that didn't work at all for you, there is a way to force download mode, using a homemade jig. google for galaxy s download mode jig if that's your only option.
good luck, and please do let us know how it goes for you. I've never used heimdall but its pretty similar to odin from what I've seen so that would probably work as well. if you're not sure if the rom you have for heimdall is a full build, open it with winrar/winzip our whatever and count how many files are inside, for me its 8 I think with full mesmerize build but we are missing one file that the fascinate build has I believe.
Sent from my SCH-I500 using XDA Premium App
perhaps if download mode is busted you could flash a fascinate rom after rooting and then boot to recovery and try flashing something a little closer to home like one of the pick n packs for the mesmerize...
but this would be one of the last things I would try, right before the homemade jig.
Sent from my SCH-I500 using XDA Premium App
Are you sure you're using the right button press for i9000? Like the guy above said try Vol button down and plug in.
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
What file did you flash?
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
crazy25000 said:
What file did you flash?
Click to expand...
Click to collapse
Stupidly, I believed I Odin-ed a file named "T959UVJI6.rar". Which if I remember right, is a custom kernel. I never really understood the whole kernel ordeal. I used to have a motorola milestone, which, I would do all all sorts of things to with no problem. But, that never included kernels. And for the most part, it didn't have any hardware key lock.
I, think, I need to do the jig mod-y thingy.
mdi2001 said:
Your trying the volume keys/usb/battery method for download mode?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm not sure how, because, apparently, my samsung's 3 keys are locked. I have tried so many times, but, it never works. Sadly.
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
s15274n said:
Try to ODIN back to JFD.
Follow my guide (signature) and use my files.
To get into odin:
load odin, load the pit and tar (don't check anything, it does it automatically)
connect usb to pc
power down phone and pull battery
plug in usb to phone
hold in both volume buttons (keep holding) and plug in battery
if it show download mode after 5 seconds, and odin shows a COM# (yellow box) click start on ODIN
wait for the phone to finish... you will then have a stock JFD and you can start over.
Click to expand...
Click to collapse
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
^ ironically it was the JI6 update that alleviated a lot of the "hardware locked" Vibrants.
Have you tryed making a JIG? It helps if you can't get into download mode
supaduparimy said:
Umm. At this point, with all my searching, I think I am missing something (mentally). Like I said, the 3 button combination never works. I have tried every combination I could possibly think of, every technique I saw, and held for every possible length of time; yet, I still got nothing. I believe I have one of those phones that are locked in that area. As I read, newer Samsung galaxy models are becoming locked.
That being said, I think mine is one of those.
Sadly.
Anyways, same as any of the 1 thousand attempts, when I (again) did those exact steps, my screen just continuously flashed a non-spinning spinney wheel.
Click to expand...
Click to collapse
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
brisseau said:
The easiest way I've found to get into download mode is to do this:
Take out the battery.
Hold down only the volume down button.
Plug in the USB cable.
That should put you into download mode automatically.
Click to expand...
Click to collapse
Sadly, my samsung, was one of the newer models, that released with the combination lock. And so, no matter how much i have tried, it never worked.
I tried every technique I have seen. Nothing.
xXcybersniperXx said:
Have you tryed making a JIG? It helps if you can't get into download mode
Click to expand...
Click to collapse
Yes, I have, actually. I found it really hard though. Mainly because the wires were way too small. But, the reason I gave up, is because the resistor is larger then the wire, and so, needed very precise soldering. I could've used the back, but, all usbs are different; and the ones i had, were very much different then all the demonstrations videos i watched.
PS I am actually buying a stick online.
(I can't post link)
As my last resource, to something I must get done, I will pay whatever...
younix258 said:
Yours is a simple dilemma, complicated by the hardware lock... idk how but i remember there Was a thread about unlocking it.. just look for it, i think it wus in the general section
Sent from a cell tower to the XDA server to you.
Click to expand...
Click to collapse
Yes... yes...
Yeah, but from what I remember, that software, just forced the samsung into download or recovery mode. From there, then the person would just mod a file to change that. But, my phone wont even do as the force says.... in the first place... It has always, just stayed in the continuous boot phase...
If you have skype or any chat program, I can help you easily.
crazy25000 said:
If you have skype or any chat program, I can help you easily.
Click to expand...
Click to collapse
The reason I am in dire need for this android to work, is because, I have no other way of flourishing in life. It was the one thing that kept everything in balance. Stupid moto, now it physically dies
On another hand, I have a iPod Touch 1G, lol.
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Oxirane said:
Did you perhaps flash Gingerbread Bootloaders? If you did then the combo to get into Download Mode is Vol up and power. Try that?
Mine sometimes takes a few goes. What usually works on Froyo Bootloaders is to take out battery, unplug phone, hold down vol up and down with my thumb, plug in then put in battery.... usually results in DL mode.
Goodluck!
Click to expand...
Click to collapse
I wish there was a physical jig seller in Vancouver (where I live).
The button combos don't work on my phone. Sadly. It was the newly made models with the button combo block.
If it helps, before, when I could go into that option, I did it by using a toolkit and making it put me to recovery/download mode.
UPDATE! I had someone help me fix it, but he failed too. It now just hangs on the boot show thingy. (rather then flashing). Oddly, my cell can still access the computer, which I think is a good thing. As in, when I plug it while the screen stays put, my computers makes a sound. What could this mean? CMD to download mode?
As for boot loader, I highly doubt it. Since, I have had no reason to look-up what they are. ehhe.
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
supaduparimy said:
Hello, please help me.
I just purchased a Samsung Galaxy S Vibrant this after noon. I used to have a motorola milestone, but it has a stubborn physical damage, and died. That milestone, really, kept my life together. With all the rich apps. Then, like I said, this after noon I bought a Samsung Galaxy S Vibrant.
At first, I successfully rooted it, then I successfully unlocked it too. Then, I must have made a huge mistake, and then it moved to a continuous boot.
I have spent hours and hours now trying to figure out how to save my 2 hour baby.
Right now, it is continuously loading the boot screen on and off. The odd thing is, when it is plugged into with a USB, the picture changes to a spinny wheel which also repeats continuously).
Can anyone help me?
PS. I can not go into download mode, or recovery as my device, apparently, is hardware locked.
Click to expand...
Click to collapse
Are you using the Tmobile US vibrant or the bell/virgin canada vibrant?
SGH-T959 or I9000m?
If you have an I9000m you are in the wrong forum.
Oxirane said:
So it's on a screen with a big yellow triangle or little cell/triangle/computer? If so, AWESOME!
Once in that mode, start Odin on the pc, then plug in... Do you get a yellow COM with some numbers show up? If so, load up the JFD tar in the pda section, the 512 pit in the pit section, repartition, and hit start... If that doesn't work... Maybe try Eugene's froyo that will not brick?
If someone got you into dl mode, sounds like you may not be hardware locked after all?
------
If the computer sees it you could also try adb to get to download mode. I'm not experienced with the program, but I believe you can get into download mode with it with only a few command lines.
Which Odin are you using? Sometimes v3 and v7 play differently with my phone.... Try the other?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Nononon, it is stuck on the galaxy text boot screen thingy. In other words, just like before, but this time it isnt flashing continuously. If it was the big yellow thingy, oh thank god... i wish.
As for that someone putting me in hardware lock, from my understanding, the only way to unbrick a locked device is through a jig. That being said, I searched up where I live for anyone with a jig, and to my luck, only one group had it. So I went there, and bam, it can now somewhat access the computer.
NOTE: I am going to receive a built jig in the mail in a few days.
From what I know, having a locked device, means, a jig is a must.
As for ADB, I am looking all over for instructions how to use that, but, I can't really find any through ones.
I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin.
I am really unfamiler with this samsung galaxy.
I did everything possible with ,y Motorola Milestone.
Awoooooo!!!! BAYWOLF's program Rules
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
dseldown said:
Look Guys!! Here's the easiest method for him, W/O him f--king it up any more! And he can get his phone up and running immediately, W/O the Jig, ETC!!
IDK why this program is SO overlooked, and everybody, always advises to do the long redundant method, this program has saved me alot of soft bricks, plus easy restore to JFD
Go to this link: http://forum.xda-developers.com/showthread.php?t=954509
Also make sure you DL and Install MS .NET Framework 4 Link: http://www.microsoft.com/download/en/details.aspx?id=17851
Then download it, ODINS inside the program already, its as easy as it gets, U cant f--k up, unless your an idiot! Just follow the instructions to the "T" it will automatically put you in DL mode and will provide the two files you need to restore your T-959 to stock Eclair JFD from there you can start to re-MOD, although I suggest you start reading everything first about modding and flashing first, including building a DL folder to stash everything you may need to fall upon for the future plus what you'll need once you've mapped out a plan to Mod your phone with whatever ROM, themes Kernel's, ETC!!!
quote: "I'm not sure if it is a bad thing, but I used Odin Mullti downloader V.4 and EZOdin" YES ITS A BAD THING, DUMP IT= GET RID OF THOSE TWO!!!
DL ODIN 1.81
Click to expand...
Click to collapse
Ahha, thank you for the suggestion, but, that wont do. It was my original fix, towards getting into recovery/download mode. But, for some sad reason, it doesn't work for bricked devices. In simple, it just says device is not find. Ironicly, the computer makes a sound with the cell is plugged in, but, thats about it apparently.
Oh yes, the cell has to have USB debugging activated. But, since I have a bricked, it can't go within the phone to find it.
NOTE: it has always been in debugging mode.
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
dr_rp1234 said:
Please Help me out.
I was using CynogenMod7 ROM. Could not write on my external SD card or mount it .
So decided to go back to Stock froyo firmware.
Tried ODIN to flash to my stock froyo firmware.
Had done it many many many a times earlier with success.
But ODIN could'nt complete the process, it kept on getting struck at Kernel and Factory some times.
Later thought there might be something wrong with bootloader.
Downloaded stock froyo bootloader.
Tried to ODIN the bootloader and got Struck at SBL many times ,Kept on trying then got struck at PARAM.
Removed the battery.
From than on NO Response what so ever combination buttons used.
No battery indicators,No light on Home keys, No signs of any power. Nothing Visible on screen & keys.
Tried usb JIG - no response.
Tried Ultimate UnBrick Resurrector-No response.
No lights .
Please solve my problem.
Click to expand...
Click to collapse
OK first, the stock images are 2.1 eclair not 2.2 froyo. Are you sure you have the right files? Are you sure your phone is a t959(3g, no front camera)and not t959v(4g, has front camera). Second, it sounds like a hard brick, if all else fails go to www.mobiletechvideos.com and check out the unbrickable mod and JTAG repair.
If you get your phone in DL mode and you have the correct Odin images, check the repartition box as well as others and run it.
Good luck
sent from my magic box to yours
Remove battery and sim and microsd. Leave out and press and hold power for 30 seconds or so. Leave battery out for a few minutes.
Put battery in and if you are on GB bootloader hold volume up and plug in USB. Might get you to download mode.
I did that with a friends phone about a year ago and got lucky. Odin recognized it. I read that somewhere here on XDA. May be a shot in the dark... but when you get desperate any new ideas to try can be a relief right?
Good luck to you.
After I messed with bootloaders and then tried to get back to stock with Kies I had this problem.
iTz KeeFy said:
You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Click to expand...
Click to collapse
I called Samsung and told them that I was just trying to upgrade to 2.2 with their software and they replaced my PCB (printed circuit board) for no cost (including shipping). I have no idea if they tried to figure out if I had really used Kies (if they could even figure it out with the state my phone was in) or if they just replaced the PCB blindly. Worth a shot, I'd say!
Thanks for your concern.
Zeferden said:
This may not work because I discovered this by accident. I bricked my phone so bad it looked like it wouldn't even turn on too. So, hopefully this works. Make sure you have your samsung drivers installed. Open Odin and connect the USB to the computer but not to the phone. Do a battery pull and do the three button boot, simultaneously connecting the USB to the phone. Most likely, nothing will happen. Hopefully, the phone will connect to Odin. Then, click start. That's right. Don't put any pit or tar files in, just click start. Hopefully, your phone will reboot to the vibrant screen and is stuck there. If it does, now you can reboot to download mode and Odin whatever files you wanted. If it doesn't work, just keep messing with the three button boot. I apologize for wasted time if it doesn't work. These steps are what I personally did on my phone. Hopefully, it works for you.
Click to expand...
Click to collapse
Thanks for your concern.
But it did not work for me.
thanks
iTz KeeFy said:
Sorry to say but I believe you have hard bricked your phone. If installing bootloaders goes wrong then your phone can turn into a paper weight. You could maybe try a jtag repair but I'm not sure it would help. You could call samsung and ask for a replacement, tell them you updated with kies or something but that's not exactly the truth
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Thanks for your concern
Its T mobile vibrant T959.
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
dr_rp1234 said:
Its T-mobile Vibrant T959 without a front camera.
Totally no response.
No lights on soft keys ( Menu,Home,Back,Search)
No response even When connected with wall charger or PC.
Please help.
Thanks
Click to expand...
Click to collapse
Sorry to say this but your phone is hard bricked, as in nothing can save it but a JTAG or warranty service. You can try to call Samsung and say you hard bricked your phone cause of kies, it worked for another.
Sent from Mount Olympus via Hermes.
you can try this, it works for many user
http://forum.xda-developers.com/showthread.php?p=17858853#post17858853
HELP!
I need help with my Samsung galaxy SGH-T959 Vibrant I got bricked so I was fixing it with odin until my phone fell and it disconnected and red letters and numbers came out. when I try turning my phone on it doesn't until I press the buttons to go to download mode those red numbers come out and I can't do anything. Please Help
When you pulled the battery, after it hung up with Odin, you corrupted the primary Bootloader, because it wasn't completely written in......Last weak possible option is to try every rocker/battery/cable sequence ETC, to get Odin to handshake with the phone!!.....If there's still no sign of life after doing that....Your only option will be to have it JTAG,d in order to rewrite the primary bootloader file back in it.....it'll never power on unless the primary bootloader executes properly!!....you can corrupt the 2ndary BL and the phone will only be soft bricked, but a primary BL corruption is phone DEATH!!....Only place I know of that's reliable is: mobiletechvideos.com....send it to them, they'll rewrite the primary BL back in it and I think 2.1 or 2.2 for you and mail the phone back to you!!....Good luck let us know if you got it powered on with any combination, as that could save another Bricker from having to send it out!!
Randomness Guy........Start your own thread in the troubleshooting forum, AND QUIT TRYING TO HIJACK THIS THREAD!!