Hello, sorry for my long absence. Now I'm updating this thread as I do not have the time to create the firmwares. So the objective of the thread is:
To give simple instructions on how to create your own firmware. I am going to assume that you already know how to:
1. Read and follow instructions.
2. Change extensions of files.
3. Extract files.
4. Use the flashtool.
5. Create a .tft file.
If you answer no to any of this questions, please investigate a little or do not attemp to do this.
Now, the instructions:
1. Go to this website http://www.omnius-server.com/ and register.
2. Now that you have registered and logged in, go to this link http://www.omnius-server.com/downloads?id=58117. You should get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now search for the firmware you are looking for in any of the folders. I'm going to choose the folder R1FA016, and the file X10a_CLARO_GT_NAM1_1234_4844.rar. But it is going to work with any.
4. Now download it and create a new folder on the firmware folder of the flashtool and put it on there. Extract it and you should get two .rar files (if not, just change the extension to .rar). Extract them both on the same folder. You should get a lot of .sin files and a .xml file.
5. Now you have to rename some files with a name like this:
5.1. This one: "system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin" to "system.sin"
5.2. And this one: "userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin" to "userdata.sin"
Now you have a list of files like this: (the files that you have to change the name can vary depending on the firmware but the part you have to delete is going to be te same (_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE), for example, so be sure to take a look to the picture if you are not so sure how a name should be)
6. Now create the .tft bundle and flash it.
7. Enjoy the phone with the firmware you created.
If this was helpful for you click on the THANKS button.
P.S.
I'm not responsible for any damage you do to your phone.
If you are going to take the time to create all the firmwares, give me the appropiate credit .
Sorry for my english if there is any mistake, I speak spanish.
If you have any sugestion you can PM me and I will be happy to help.
HTML:
Thank you for this!! I didn't have the Claro Guatemala firmware and I needed it for warranty purposes...
Sent from my AOSP on Xperia (GT)
Is it possible to have the Vodafone branded ROM for The Netherlands?
I've made a backup before I did the Nordic 2.1 update, but for some reason I can't use it with the above...
I'm getting an "Unable to open channel, GetLastError=0" message after pressing option 1 and connecting the X10 in flash mode...
I'm using Windows 7 Ultimate 32-bit with JRE and JDK 6u23 installed...
DaDude1973 said:
Is it possible to have the Vodafone branded ROM for The Netherlands?
I've made a backup before I did the Nordic 2.1 update, but for some reason I can't use it with the above...
I'm getting an "Unable to open channel, GetLastError=0" message after pressing option 1 and connecting the X10 in flash mode...
I'm using Windows 7 Ultimate 32-bit with JRE and JDK 6u23 installed...
Click to expand...
Click to collapse
If you get this error you have added WRONG device ID. Maybe you have not only ONE in registry. Try finding another one! If that doesn't work, please install SEUS one time, via SEUS put your phone in Flash Mode and the unplug it; that way SEUS will install the drivers and you'll have your DEVICEID, then go to the notepad called "DEVICEID" and put it in there. Try Reflashing again.
Let me know if this help you.
jimbo77 said:
If you get this error you have added WRONG device ID. Maybe you have not only ONE in registry. Try finding another one! If that doesn't work, please install SEUS one time, via SEUS put your phone in Flash Mode and the unplug it; that way SEUS will install the drivers and you'll have your DEVICEID, then go to the notepad called "DEVICEID" and put it in there. Try Reflashing again.
Let me know if this help you.
Click to expand...
Click to collapse
Thanks, but I've tried to find another DeviceID and can find only one, even if I use another USB port on my laptop...
I'm now installing SEUS, maybe that's the solution...
It's installing JRE also, so maybe the JRE version I've installed wasn't the good one?
Will let you know, thanks!
I'm now uploading the vodafone NL firmware. Just wait for it.
Yes! Seems to be working now, I see a lot of INFO: write commands on my screen!
Thanks for your help, hope to get the Vodafone branded 1.6 rom back again so I can upgrade to the Vodafone 2.1 branded rom, thanks!
oalf170892 said:
I'm now uploading the vodafone NL firmware. Just wait for it.
Click to expand...
Click to collapse
Thanks for the quick response!
DaDude1973 said:
Yes! Seems to be working now, I see a lot of INFO: write commands on my screen!
Thanks for your help, hope to get the Vodafone branded 1.6 rom back again so I can upgrade to the Vodafone 2.1 branded rom, thanks!
Click to expand...
Click to collapse
You're welcome pal..!! Let us know if that helped you and probably you can help us with a small donation
Have a great Day!
jimbo77 said:
You're welcome pal..!! Let us know if that helped you and probably you can help us with a small donation
Have a great Day!
Click to expand...
Click to collapse
Donation will certainly be done if everything works!
Have a great day too!
Thanks again...
Firmware you wanted is uploaded
There you go... now just download and follow the steps.
DaDude1973 said:
Donation will certainly be done if everything works!
Have a great day too!
Thanks again...
Click to expand...
Click to collapse
Yes! This really worked for me, I was back on the Vodafone branded 1.6 ROM and I'm now updating to the Vodafone branded 2.1 ROM as we speak!
You guys rock!
Donation will be made soon, I first have to update my own paypal account...
I also will tweet this page to my Twitter and Facebook, so you will get more traffic I hope!
Thanks again!
oalf170892 said:
for cases in wich you flashed a firmware on your x10 that isn't from your country or operator, and now your operator has released the 2.1 update (still not my case), and you want to run your operators firmware in case of any incident with your phone.
Click to expand...
Click to collapse
If you have 2.1 already and your network has also released it, you can use - [TUTORIAL] -Simple way to switch from one 2.1 version to another - to save having to flash twice.
XperiaX10iUser said:
If you have 2.1 already and your network has also released it, you can use - [TUTORIAL] -Simple way to switch from one 2.1 version to another - to save having to flash twice.
Click to expand...
Click to collapse
Yes, that is working, but you have to root your phone to acomplish that, and if your phone is rooted, you have lost all waranty both Sony Ericsson and your Operator. And over that, all the custom of your Operator is not going to be on your phone.
Thats why flashing 2 times isn't that hard to gain waranty back.
DaDude1973 said:
Yes! This really worked for me, I was back on the Vodafone branded 1.6 ROM and I'm now updating to the Vodafone branded 2.1 ROM as we speak!
You guys rock!
Donation will be made soon, I first have to update my own paypal account...
I also will tweet this page to my Twitter and Facebook, so you will get more traffic I hope!
Thanks again!
Click to expand...
Click to collapse
Is nice to hear that you have now your 2.1 android vodafone costume version.
And remember if this is working for you Recomend and Donate.
Enjoy your x10!!!
oalf170892 said:
Yes, that is working, but you have to root your phone to acomplish that, and if your phone is rooted, you have lost all waranty both Sony Ericsson and your Operator. And over that, all the custom of your Operator is not going to be on your phone.
Thats why flashing 2 times isn't that hard to gain waranty back.
Click to expand...
Click to collapse
Perhaps you've missed the point, that method allows you to flash a branded rom back to the phone via SEUS, so once you flashed, you've lost root and got a branded rom back on the phone.
Firmware Movistar 016 España
I uploading the link for flash firmware donut Movistar Spain.
http://www.megaupload.com/?d=3O33P3H7
question Device ID
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
vinny.1967 said:
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
Click to expand...
Click to collapse
Look, for the Device ID you should have something like this "5&34B1332A&0&5". I can't answer your question because i have never use adb.
But, to get your Device ID, before coping the firmware files to firmware_1, open it and run the x10flash and conect your x10 in flash mode, and a new file named DeviceID.txt ahould have been created. Open it and you should have your Device ID.
Hope to be Helpful
vinny.1967 said:
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
Click to expand...
Click to collapse
This is hoe you can get your DeviceID on Windows...
1: press start (or windows icon) and in the run box type "regedit" without the ""
2: click edit>find, and type in "Vid_0fce&Pid_adde". You should find "DeviceInstance". Copy the last section of that, it should look something like "5&2888d0ff&0&1" 2.1: If that fails to see anything, make sure "Match whole string" is un-ticked, and click "find next", if that fails, try "USB\VID_0FCE&PID_ADDE" Note: It changes with every diffrent USB port you use....
I hope this helps to clarify..
Sent from my X10i
Related
Hello Everyone,
Lately, I have seen lots of confusion regarding the ICS update that is to be released by Sony.
I am writing this post to clear things up a bit. The table below will clear the most common area of confusion.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to Update your phone normally by Sony Method?
Go here for the list of SI numbers that are eligible for the update. Check your SI number by opening the back cover of your phone, and removing the battery and seeing the number underneath. In case this SI number matches with one on the list at Sony Website, connect your phone to the Computer, and you should be able to update using PCC or SUS.
___________________
What are SI numbers and CDF numbers?
Phones of each region has a specific SI number as well as a CDF number. That is, to every SI number there is a corresponding CDF number.
To know your SI number, we need open the back cover of the phone, and remove the battery, and see the number underneath.
Corresponding to this SI number you have a CDF number. For knowing your CDF number, open the dail pad of your phone, and dial:
Code:
*#*#7378423#*#*
then go to Service Info > Software Info. There, the Customization Version is your CDF number.
___________________
How to Force update your phone?
Sony releases the update for an SI number... This means that all phones having that SI number or the corresponding CDF number is eligible for the update.
The software PCC or SUS, reads the CDF number from build.prop file in your phone memory. If we can edit our CDF number and change it to one whiose corresponding SI has recieved the update, we can fool SUS or PCC and get the update.
For more info and a list of CDF numbers: Here
Thanks to dryhte
___________________
Can I root my phone after Update to 4.0.4?
After Sony released the 4.0.3 update, DoomLord and team created an easy root toolkit for both locked and unlocked bootloader: Here.
However, the 4.0.4 update is immune to this method of root. So to root on 4.0.4 some workaround methods have been brought up.
Scenario I: You are in a rooted GB firmware. Here . Read Post #3 to know how the method works. Go Here to get a step by step Tutorial.
Scenario II: You are in ICS non rooted Firmware. Reported to work on the Xperia Pro: Here. Recommended only for testers and devs currently
Thanks to AeonWorld and puppet13th.
___________________
How To Update your Phone using Flashtool?
Note:
To go to Flash mode, you need to switch your phone off, and connect it to your computer while you hold the Volume Down key. A Green light will be shining in the notification LED while you're in this mode.
To go to Flashboot mode, you need to switch your phone off, and connect it to your computer while you hold the Volume Up key. A Blue light will be shining in the notification LED while you're in this mode.
A. Download and Install Flashtool from: Here
[For sake of Convinence, we assume that the install location is C:\Flashtool]
B. Install the drivers.
For that, install PC Companion on your PC.
And go to C:\Flashtool\drivers and Double Click Flashtool-drivers.exe. Installation here after is self explanatory.
I. Put the downloaded ftf file to C:\Flashtool\firmwares folder.
II. Open up flashtool and click on the Thunder Icon at the Corner.
III. Choose Flashmode
IV. Select the firmwares you wish to flash. Make sure you check Wipe User Data, Wipe Cache and Wipe app logs buttons at the right side of the box.
V. Select Okay and follow the instructions.
VI. After the process is finished, remove the USB cable and reboot your phone.
You should be having the new firmware now
How will Rooting on unrootable 4.0.4 works?
Explanation for someone who is in KG of Android School.
Explaination the method of root, as given by puppet13th.
This method involves the following steps:
1. Creation of a file [/data/local.prop] which lets specific applications access the root of your device. For this you need to have root access. That is, you create this file when you are on .58 or .62 or whatever, rooted GB firmware. So, for rooting your 4.0.4 you need to start from GB itself.
2. Updating to ICS, but making sure you preserve the file /data/local.prop. For this you update making sure you do not do a factory reset.
So after this step, you have a working unrooted ICS ROM, but with a gate which can allow su binary and superuser.apk to be pushed.
3. Now, you can push the su binary and superuser.apk files, into the phone memory through the gateway you created earlier.
Now you have a working 4.0.4 ROM with SU Binary and Superuser.apk planted. That is a rooted 4.0.4 ROM.
Head over to puppet's thread to get the required files and a step by step procedure of the above technique. Puppet's Tutorial going over your head? See here for another tutorial of the same procedure
______________
Explaination the method of root, as given by AeonWorld. [Note: This method is reported working with Xperia Pro (as well as Xperia Arc, Arc S, Neo, Neo V, and Ray), and should work with the mdpi devices too. In case it doesn't work and you end up with a broken phone, you will need to flash some working firmware ftf on your device to get it working again] Recommended only for testers and devs currently
1. Update your device to ICS 4.0.4.
2. Download the Xperia Neo 4.0.3 ftf, and flash only the kernel in the package.
To do this, after selecting the 4.0.3 Neo ftf file in Flashtool, make sure the options of Flashtool look as follows:
3. Turn on Your phone, and you will see black screen, as the kernel doesn't match with the ROM. But ADB will work even then.
4. Run the DoomLord's Toolkit for root, and it will work with the 4.0.3 kernel, and SU binary files and SuperUser will be pushed to the phone memory.
At this stage, you have a "not working" device with a rooted 4.0.4 ROM and the 4.0.3 Kernel.
5. Again flash only the kernel of 4.0.4 ROM from the 4.0.4 ftf for your device (Using flashtool as you did before)
At the end of this step, you will have a working 4.0.4 Rooted ROM with the 4.0.4 kernel.
Go to AeonWorld's thread (for Xperia Pro) to get the required file and more information.
Bonus Section
All links in post at one place:
1. List of SI numbers by Sony. http://talk.sonymobile.com/thread/38377?tstart=0
2. Force updating your Phone. http://forum.xda-developers.com/showthread.php?t=1382018
3. Rooting .
a. after you have updated to 4.0.4 http://forum.xda-developers.com/showthread.php?p=26805796 and
b. when you are on rooted GB Build http://forum.xda-developers.com......post26914104
4. Flashtool Information and Download. http://androxyde.github.com/
Other Relevant Links:
5. ICS Update Discussion Thread. http://forum.xda-developers.com/showthread.php?t=1690704
6. Tutorials | Firmware | FAQ | First Aid. http://forum.xda-developers.com/showthread.php?t=1568792
(You can find ftf files here too)
7. Link to ftf file for official ICS Update.
Download the ftf from the following links:
Xperia Mini Pro:
SK17i: Here
SK17a: Here
Thanks to Jozinek
Xperia Live with Walkman:
WT19a: Here
Thanks to davidcmc
Xperia Mini:
Xperia Active:
Xperia Ray:
ST18:Here
Xperia Arc S:
LT18:Here
Xperia Neo V:
MT11:Here
Xperia Neo:
MT15:Here
Xperia Arc:
LT15: Here
Awesome info mate...thanks....
Nice post, but you have to change "Unlocked" to "Locked" and vice versa on the table
Svartehjerte said:
Nice post, but you have to change "Unlocked" to "Locked" and vice versa on the table
Click to expand...
Click to collapse
Oops.
Thanks.
I dont use .the box ticked disable vertication checked
And all my ics 4.0.4 work perfect in fact to perfect
Plus one golden rule to flashing is take sim card and memory card out
Before flashing .then you have no probelms
jasonvoor said:
I dont use .the box ticked disable vertication checked
And all my ics 4.0.4 work perfect in fact to perfect
Plus one golden rule to flashing is take sim card and memory card out
Before flashing .then you have no probelms
Click to expand...
Click to collapse
Never had problems, even though I have always flashed with SIM and SD inside.
Sent from my Xperia Live using xda premium
To OP
Please add info : if user want to use my rooting method,do it before running any update.
Thanks.
Sent from my ST17i using Tapatalk 2
puppet13th said:
To OP
Please add info : if user want to use my rooting method,do it before running any update.
Thanks.
Sent from my ST17i using Tapatalk 2
Click to expand...
Click to collapse
Okay Master.
Info added about rooting by puppet's method to thread #3.
Thanks,
Rick
Sent from my SK17i using XDA
Nice thread. Should be a sticky. Well done :thumbup:
BanorBhai said:
Nice thread. Should be a sticky. Well done :thumbup:
Click to expand...
Click to collapse
Thanks, bro.
Banor bro.
What's the meaning of your name? Does it mean monkey brother? Cool name.
Good Day,
Rick
Sent from my SK17i using XDA
DragonClawsAreSharp said:
Thanks, bro.
Banor bro.
What's the meaning of your name? Does it mean monkey brother? Cool name.
Good Day,
Rick
Sent from my SK17i using XDA
Click to expand...
Click to collapse
Banor means
The meaning of Banor come may come from a craft, such as the name "Brewster" which refers to a female brewer. Some of these trade-based family names may be a profession in a different language. This is why it is essential to understand the country of origin of a name, and the languages used by it's family members. Many names like Banor originate from religious texts such as the Bible, the Bhagavadgītā, the Quran, and so forth. Often these surnames relate to a religious sentiment such as "Favored of God".
shprakash said:
Banor means
The meaning of Banor come may come from a craft, such as the name "Brewster" which refers to a female brewer. Some of these trade-based family names may be a profession in a different language. This is why it is essential to understand the country of origin of a name, and the languages used by it's family members. Many names like Banor originate from religious texts such as the Bible, the Bhagavadgītā, the Quran, and so forth. Often these surnames relate to a religious sentiment such as "Favored of God".
Click to expand...
Click to collapse
Awesome. . I thought something completely different.
Thanks,
Rick
Sent from my SK17i using XDA
DragonClawsAreSharp said:
How will Rooting on unrootable 4.0.4 works?
Explanation for someone who is in KG of Android School.
Here I will explain the method of root, as given by puppet13th.
This method involves the following steps:
1. Creation of a file [/data/local.prop] which lets specific applications access the root of your device.
2. Updating to ICS, but making sure you preserve the file /data/local.prop. For this you update making sure you do not do a factory reset.
So after this step, you have a working unrooted ICS ROM, but with a gate which can allow su binary and superuser.apk to be pushed.
3. Now, you can push the su binary and superuser.apk files, into the phone memory through the gateway you created earlier.
Now you have a working 4.0.4 ROM with SU Binary and Superuser.apk planted. That is a rooted 4.0.4 ROM.
Head over to puppet's thread to get the required files and a detailed step by step procedure of the above technique.
Click to expand...
Click to collapse
I dont get it about the /data/local.prop??
I have checked mine and it already have local.prop in /data/local.prop...
Arrrghhh...I have messed up my brain...can you explain how to root 4.0.4??
Till-Kruspe said:
I dont get it about the /data/local.prop??
I have checked mine and it already have local.prop in /data/local.prop...
Arrrghhh...I have messed up my brain...can you explain how to root 4.0.4??
Click to expand...
Click to collapse
Turning on my pc again to help you. Wait. I will come back soon. .
Thanks,
Rick
Edit:
Okay, So here's what you need to do.
Go to http://forum.xda-developers.com/showthread.php?p=26914104#post26914104, and download the file called Xperia-ROOT.zip as uploaded by puppet.
Then extract it, and run the file 01-local-prop.cmd. It will ask you to connect your phone to the PC. Do it when prompted. Make Sure USB debugging is checked "on", and turn on the screen and then continue.
The batch file 01-local-prop.cmd will now try to replace the /data/local.prop with a new one. For that, it will ask for root permissons from Superuser, and Superuser in turn will ask you. So you will have to allow. (That's why you turned the screen of your device on).
When the batch run is complete, you have the necessary local.pro in /data.
All this you do when you are on a rooted .58 or .62 or whatever GB firmware.
Then, you wait for Sony to release the update.
Once Sony releases the update, you update using PCC or SUS or Flashtool, but you must make sure that you do not factory reset. That is you preserve the edited local.prop.
Once the update is done you will be running a 4.0.4 ROM which is unrooted.
Now run the file 02-push-root-files.cmd from the zip file puppet gave. Follow the onscreen instructions, and the batch file will push superuser and the SU binary files thus giving you root.
At the end of this step, you will be running a 4.0.4 ROM with root.
Okay, I typed a lot. Read it and you will understand. And if you still don't ask me again. I will try to help. And obviously you can ask master Puppet13th and I am sure he will help you too.
Good Day,
Rick
Sent from my SK17i using XDA
Awsm dude..a detailed explaination certainly help many..
Sent from my WT19i using xda premium
DragonClawsAreSharp said:
Turning on my pc again to help you. Wait. I will come back soon. .
Thanks,
Rick
Edit:
Okay, So here's what you need to do.
Go to http://forum.xda-developers.com/showthread.php?p=26914104#post26914104, and download the file called Xperia-ROOT.zip as uploaded by puppet.
Then extract it, and run the file 01-local-prop.cmd. It will ask you to connect your phone to the PC. Do it when prompted. Make Sure USB debugging is checked "on", and turn on the screen and then continue.
The batch file 01-local-prop.cmd will now try to replace the /data/local.prop with a new one. For that, it will ask for root permissons from Superuser, and Superuser in turn will ask you. So you will have to allow. (That's why you turned the screen of your device on).
When the batch run is complete, you have the necessary local.pro in /data.
All this you do when you are on a rooted .58 or .62 or whatever GB firmware.
Then, you wait for Sony to release the update.
Once Sony releases the update, you update using PCC or SUS or Flashtool, but you must make sure that you do not factory reset. That is you preserve the edited local.prop.
Once the update is done you will be running a 4.0.4 ROM which is unrooted.
Now run the file 02-push-root-files.cmd from the zip file puppet gave. Follow the onscreen instructions, and the batch file will push superuser and the SU binary files thus giving you root.
At the end of this step, you will be running a 4.0.4 ROM with root.
Okay, I typed a lot. Read it and you will understand. And if you still don't ask me again. I will try to help. And obviously you can ask master Puppet13th and I am sure he will help you too.
Good Day,
Rick
Sent from my SK17i using XDA
Click to expand...
Click to collapse
Update using PCC and SUS does not make factory reset right??? Only flashtool does right???
Congratulation to all who's been waiting for this!
First things first! Be careful, I'm not to blame if you brick your device.
WARNING - See the second post for reported problems
This ROMs are for the North American aka US devices (YP-GI1CB), if you have an international device (YP-GI1CW), you should go to this thread which was created by our good friend zebluk. Also there is a wonderful tutorial how to flash the rooted image in that thread, so you can follow it (but use the image from this thread). All credits to zebluk!
So..
-------------
When downloading from the mirrors, be warned, I have not checked them, you should check their integrity by calculating their sha1 hashes and comparing with ones I am providing for each file.
Here is the PIT file.
Here is the STOCK FACTORYFS ROM (size: ~260 MiB, sha1: 709ea3a1594fe4776065308a198e120129652b38)
Mirrors:
Mirror by ECLK09 (password: XDA-DEV)
Here is the STOCK KERNEL (size ~5.2 MiB): sha1: 25235a0ed6ad42cab1743b8f1c141248efb25647)
Mirrors:
Mirror by ECLK09 (password: XDA-DEV)
-------------
And here is the ROOTED STOCK ROM (size: ~260 MiB, sha1: 64ec57e6254b3c24ad7740b0c2bcad3a6e4bd26c)
Mirrors:
Mirror by ECLK09 (password: XDA-DEV)
-------------
Password for all the 7zip archives: XDA-DEV
First you should un-7zip your downloaded file, there you will have directoriy with a descriptive name and a tarball archive inside.
You can flash these tarball (without extracting) using Odin v3.04 (Attached) or extract the image file from the tarball archive and flash using Heimdall v1.3.1 (don't use the 1.3.2 version). I've personally tried flashing only with Heimdall under Linux, but Odin should work too.
If you are using Windows and you don't have device drivers, download them from here.
@Good Guy User:
DepositFiles is not the best filesharing service but works well for me, feel free to create mirrors and share links in PM, I'll post them here.
Greetz to: Entropy512 for showing the correct road, zebluk for help and advices, baruch6132 for flashing my untested rooted kernel and dumping the factoryfs, zaclimon and baladev for helping, Benjamin Dobell and Glass Echidna for Heimdall, jazzor for ext4_utils, William Enck for split_bootimg.pl, ECLK09 for providing mirrors for uploaded files, Green Day for being awesome, all who have helped or held breath for this, and to you!
Possible problems and workarounds
There are reported cases when the wi-fi stopped working after flashing the rooted factoryfs. And there are two reported solutions:
1. Backup the contents of /system/etc/wifi before flashing to restore them after flashing if you experinece the wi-fi problem. (This is the recommended way)
2. Flash the kernel.
---------------------------------
Added:
As it turned out in the International version (YP-GI1CW) thread, the highly possible reason for this is that there are slightly different versions of the devices. The full code of my device is YP-GI1CB/XAA. If your version is not the XAA (there is, for example, YP-GI1CB/XEG), just backup the contents of your /system/etc/wifi directory before flashing, then rewrite them back if you lose wifi after rooting.
Apologies if this is a dumb question, but I'm having trouble figuring out which version to use. I bought my device in the US from a retail store, so I'm assuming it's the US version, but my model number (both under the battery and in the "About Device" section) just says "YP-GI1". The android version is 2.3.6, and kernel is 2.6.35.7-CL1. Any ideas on how to find out if this is a CB or CW device?
Thanks a ton
direwolf1 said:
Apologies if this is a dumb question, but I'm having trouble figuring out which version to use. I bought my device in the US from a retail store, so I'm assuming it's the US version, but my model number (both under the battery and in the "About Device" section) just says "YP-GI1". The android version is 2.3.6, and kernel is 2.6.35.7-CL1. Any ideas on how to find out if this is a CB or CW device?
Thanks a ton
Click to expand...
Click to collapse
I'm pretty sure that it's the US version YP-GI1CB.
There are two reported cases when the wifi stopped working after flashing the rooted factosyfs.
Please report if you have successfully flashed and rooted without problems, so we can know if those two cases were exceptions due to some still unknown reason or there is a real problem. Thank you.
I'm an idiot--found the model number and it is indeed a US device. I'd like to download this and root it, but now I'm worried about the wifi issue. Any new reports?
Root successful, everything works fine
This is the first time I have rooted using Odin. I followed the instructions on the 4.2 Int. rooting page linked in the top (this is the US version, and I did use the files on this thread). Everything works great, wifi included. I installed AdAway and removed all of the Samsung bloat. Sorry about the pic quality, my nexus 7 vga camera is all that I have near me lol.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, could you help me please! This is the firs time for my rooting a SGP 4.2. Can I root it using windows 7? I'm now downloading all the files attached by alice, but (here's the problem) I don't know what I should do with its.
AngelBoutto said:
Hi, could you help me please! This is the firs time for my rooting a SGP 4.2. Can I root it using windows 7? I'm now downloading all the files attached by alice, but (here's the problem) I don't know what I should do with its.
Click to expand...
Click to collapse
Follow the tutorial here (but use the ROM in this thread). It's how I did it. This was my first time using this method as well. The only file you need is the modified (aka rooted) ROM. Works great.
EDIT: NM I still had a nexus 7 tar in the same directory that I confused. Please ignore and thanks to all who got this root to work. Cant wait to we have kernels and such that support voodoo sound.
The second post (problems and solutions) has updated.
Users who have experienced the wifi problem after rooting, can you please write here you full device code (e.g. mine is YP-GI1CB/XAA) so we can know whether the problem is the existence of slightly different versions of the same device.
To find out your revision, enter in terminal getprop ril.product_code.
alice90 said:
The second post (problems and solutions) has updated.
Users who have experienced the wifi problem after rooting, can you please write here you full device code (e.g. mine is YP-GI1CB/XAA) so we can know whether the problem is the existence of slightly different versions of the same device.
To find out your revision, enter in terminal getprop ril.product_code.
Click to expand...
Click to collapse
My model is: YP-GI1CB/XEG
Think you know how I solved my wifi Problem. Kernel Flash and usb jigg
I rooted it using these instructions and it worked like a charm. Wifi is working great. Only issue I had was that my device seemed a little finicky when I was trying to get it into download mode, but I figured it out eventually. Thanks so much for this!
sedelman said:
Follow the tutorial here (but use the ROM in this thread). It's how I did it. This was my first time using this method as well. The only file you need is the modified (aka rooted) ROM. Works great.
Click to expand...
Click to collapse
I finish to install the rom rooted, but I think doesn't work for me. all in my device is the same, and and check with a rooted checker and said your device isn't rooted.
AngelBoutto said:
I finish to install the rom rooted, but I think doesn't work for me. all in my device is the same, and and check with a rooted checker and said your device isn't rooted.
Click to expand...
Click to collapse
Find the SuperSU app in the menu (it should be there if you flashed successfully) and open it, it will ask a question about replacing the su, confirm it.
Then try to install something that requires root and check whether it works.
Many thanks.
Complete success with Odin 3.04.
I was confused initially with Heimdall and mistakenly tried to load factoryfs.img as a Heimdall package which returned an error about a missing factoryfs.xml file. "factoryfs.img" is not a Heimdall package. If you want to use Heimdall simply to flash the factoryfs.img, I recommend using the command line.
heimdall flash --factoryfs factoryfs.img
No problems with WiFi after the upgrade as my device is YP-GI1CB/XAA, although I backed up my /system/etc/wifi folder just in case.
Thanks.
Finally!!! I did! But, now my problem is the RAM! in a few minutes the level of RAM is on the top! And my device start to be frozen for period of time... Could someone help me with that? Someone of you know if we can find ROM's modified?
AngelBoutto said:
Finally!!! I did! But, now my problem is the RAM! in a few minutes the level of RAM is on the top! And my device start to be frozen for period of time... Could someone help me with that? Someone of you know if we can find ROM's modified?
Click to expand...
Click to collapse
Try rebooting.I had the same problem as you then i rebooted and the problem went away.
kvn7918 said:
Try rebooting.I had the same problem as you then i rebooted and the problem went away.
Click to expand...
Click to collapse
I restart my device almost 5 times a day! The RAM runaway! When I open Skype, well in 30 second my device start to restart automatically.
i have a problem i use this rom the root rom, now my player the home button dont work any one have same problem please let me know model numbe yp-gi1
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
delictis said:
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
Click to expand...
Click to collapse
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
rjspark89 said:
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
Click to expand...
Click to collapse
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
delictis said:
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
Click to expand...
Click to collapse
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
rjspark89 said:
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
Click to expand...
Click to collapse
TNX for your time and help
I'll try to flash that ROM and let you know.
I hope that works.
TNX
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
delictis said:
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
Click to expand...
Click to collapse
i think the problem.. is that.. see to sometimes.. custom recovery.. like cwm and twrp doesn't really work well when you try to flash stock ROMS.. so.. do you have your stock recovery? if so try going into download mode/pink screen mode ..replace cwm with your stock recovery.img.. then try updating again..
Huawei Ascend y210-100
Hello everyone,
I have a problem with my new Huawei Ascend Y210-100 Mobile. I wanted to root it but I go wrong. Because i have ran the ClockworkMod Recovery 5.0.2.8 For V8404-Y210-By Gocmobile.net.zip for Y210D. (S.H.I.T.) Grrrrrr.
My Y210 do stupid things The phisical buttons do functional full badly.
WI-FI and HotSpt don't work.
I have found the Factory firmware on Huawei support site but i am not able to upgrade the Factory ROM. Unpack and the install section stopped.
Here is the all found Firmwares and websites:
ORIGINAL Factory Firmware: h t t p://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
This was another ROOT method: w w w.symbianize.com/showthread.php?t=929464 (I don't suggest.)
And this was the BAD choice!!!!!: !!!ONLY Y210D!!!
h t t p ://ge.tt/8ZscJic/v/0?c
PLEASE PLEASE Huawey GURUs Help me.
Thanks a lot for every useful advice.
Tony (HUN)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST one more request.
Does anybody an original Huawei ascend 210-100 Factory firmware saved backup (without personal datas of course!!!) by ClockWorkRecovery PLEASE???
Could someone do a factory firmware backup and send to me Please Please PLEASEEEEE?
begi.76 @ gmail .com (put in formal email format)
did anyone reply you?
helping a friend to root/custom rom this phone, but not many good results.
no CM7, no ICS.... only found GB and GB themed like ICS
GB themed like ICS
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Factory FW (GB), unzip read instructions.
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
Is anyone currently doing a DEV for this unit?
Good Morning Sir,
No, nobody sent me flash file yet.
But I asked help just 2 days before.
Thanks for your help. I will try to do ASAP.
I will send feedback imediately as soon as work well.
PS: sorry 4 my bad English. I hope almost clear for everyone who read it.
Thanks,
Tony
---------- Post added at 10:06 AM ---------- Previous post was at 09:39 AM ----------
Hello Again,
I try to use the GB original firmware already.
I couldn't flashing the ROM. It was write in the first note.
As you can see in the pictures.
Something is go wrong with the CRW install (y210D )
Maybe the fastboot or something other because the 210D options available in my 210-100. I mean the HOME, BACK, MENU buttons working like in case 210D.
The SD card flashing not working. (cry, cry, cry)
I can find this informations in the sd_update.log:
"filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
"
Someone can unpack the app file? Maybe there can find the solution.
Thanks,
desperate Tony. (HUN)
Is your CWM working or not working, you no mention.
Flash CWM method 1
http://androidarea51.com/***-all-things-root-***-287/cwm-n-root-for-the-huawei-y210-build-b865/
Flash CWM method 2
http://myhvgagames.blogspot.sg/2013/08/3-in-1-stock-recovery-clockworkmode.html
Once you have CWM (or already using), flash this. (i am using for Y210-100)
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Below 2 for Y210D, have flash wifi can connect but no stable, Home/Menu/Back keys all jumble up also
Code:
VIETTEL-V8404-face-JB-By-Gocmobile.Net.zip
Code:
v8404-GMB-05-ModS4-ICS.zip
If you still problem, please download factory and try flash to stock.
Hi,
Yes the CWR working well. I can make backups and every function working as well.
I have tried some rooting method but no one worked.
The truth, I didn't want to install CWR just I wanted to ROOT my mobile.
Reason: Too less memory makes slow the phone, and write it "too less memory pls delete some program etc..."
But ones, after the y210D CWR install, I can root the phone with SuperOneClick 2.3.3. (yeeeeeeeeaaaaaaah)
ROOT, UNROOT, SHELL ROOT working well ( I said excellent.)
AFTER: Just I can't use HOME/BACK/MENU keys and WI-FI. (Cry)
Summary.
I'd like install the factory Firmware (I am not able to do this because it is freezing on 2nd step.) You can see in previous 2 pictures.
I'd like rooting the phone. Reason: intstall or moving programs to SD card.
I wouldn't like install the CWR because no need it for me.
Something BAD thing happend during the CWR install with 210D, because after the boot I have experience the functionality difference.
Okey I think maybe a bit difficult my English. If something no clear please write here and i will try to rephrase that.
Thanks.
Tony.
Hey! It would be a problem, I tried to ask one of the CM rom on Huawei Y200, and everything is done as it should, but the phone will go only to the boot LOGO .... Somebody help me!
Tapatalk 2-vel küldve az én Optimus 4X HD-ről
for
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
mandroid76 said:
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
Click to expand...
Click to collapse
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
bob4x4 said:
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
Click to expand...
Click to collapse
u should research more... original rom and instructions provided. ive done it before sometime back.
felix_fx2 said:
u should research more... original rom and instructions provided. ive done it before sometime back.
Click to expand...
Click to collapse
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
bob4x4 said:
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
Click to expand...
Click to collapse
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
felix_fx2 said:
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
Click to expand...
Click to collapse
thank you very much.
i've downloaded thes two..
HUAWEI_Y210_firmware(Y210-0100%2CAndroid 2.3%2CV100R001C00B856%2CNormal%2C05011DPY)
And
Ascend_Y210(Y210-0100_Android_2.3_V100R001C00B839_Normal_05011DPY)
think maybe something goes wrong in the rom custom that i've installed.
no news?
best regards.
I know others have looked as well but can anyone *please* dump the rom of their AT&T 4.2.2 stock image for the good of all us AT&T S4 Zoom owners who are stuck in a logo reboot loop or have other problems that require a restore? There are currently no images available on any of the usual places (Samsung firmware, updates etc.)
Thanks very very much in advance!
If you not found any stock rom for C105A At&t... & Your Phone is In Boot loop Stuck on Samsung Logo... Then Just Flash C105A Mexico C105AUBUAND1, 4.2.2 System And Cache Separately in Odin...
This will not work because the AT&T variant of the phone is bootloader locked. You are not able to flash firmware variants unless they are for the AT&T version of the phone. Hence why so many people need a firmware image for AT&T. If anyone has or can make a DD.Image it would help a lot of people.
moomoo said:
This will not work because the AT&T variant of the phone is bootloader locked. You are not able to flash firmware variants unless they are for the AT&T version of the phone. Hence why so many people need a firmware image for AT&T. If anyone has or can make a DD.Image it would help a lot of people.
Click to expand...
Click to collapse
i am try this Method personally.. Every Thing working Fine
Download SM-C105A Mexico (Telcel) Android 4.2.2 firmware, from SamMobile,
Extract Whole Firmware Select only System Image & Cache file & Make it odin flashable Tar. using (tar-Tool_Odin3-v3.07_by_mkh.mourad)
Flash System & Then Cache In Odin Ap.. Thats It..
Try Only If Your Phone Is Soft Brick or In Boot loop State... Thanks
http://forum.xda-developers.com/picture.php?albumid=13143&pictureid=53644
http://forum.xda-developers.com/picture.php?albumid=13143&pictureid=53643
I'd like to help. I've extracted system.img and cache.img from an AT&T sm-c105a (4.2.2). Unfortunately I didn't read the above instructions very well and placed them both in an odin flashable tar.md5 file. I guess if you want to follow the above proceedure you will need to flash them separately. On the other hand, if you have a brick already anyway, you could just try it out. Any problems with the file post here. Mediafire was being dodgy and I wouldn't be surprised if it was damaged. Anyway here is the link, or as close a facsimile as my noobness will allow: http www mediafire com /download /xbdxb8gun1niwg9 /sm_c105a.zip
So, I assume from the deafening silence that this did not work? I'm not surprised since a dd of a mounted partion (system) can't be a good idea. I have been experimenting with Adebar which is also supposed to make a system backup. Doesn't seem to fully support the phone, or, doesn't create the full backup. I'm open to other ideas....
More files
Boot and recovery images, plus pit file all from stock sm-c105a AT&T JB 4.2.2. www . mediafire . com/ download/ 3df255lt8unnh24/ Boot_Recovery.tar.gz
Faisalkhan.007 said:
i am try this Method personally.. Every Thing working Fine But 3G Is Not Working..
Download SM-C105A Mexico (Telcel) Android 4.2.2 firmware, from SamMobile,
Extract Whole Firmware Select only System Image & Cache file & Make it odin flashable Tar. using (tar-Tool_Odin3-v3.07_by_mkh.mourad)
Flash System & Then Cache In Odin Ap.. Thats It..
Try Only If Your Phone Is Soft Brick or In Boot loop State... Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Don t work to me.
Here are a cache and system image from the AT&T variant of the phone. @awwar can you be more specific. You are in a boot loop? No recovery?? Device recognized by Odin/Heimdall??? I am VERY interested in providing a way to unbrick our phones but am unwilling to brick my only device. If you want to try something post here and I will provide what support I can.
My CM-C105A is in Kies recovery mod mode. I can flash only system and cash tar files. Kies show error when i am traing to recover my phone.
Have you tried the pit file? Sometimes that might help?? Also, I have a boot.img download further up the page. If your bootloader is bad you could get similar symptoms? Kies doesn't like my boot/recovery images? Can you post the specific error? Thanks for replying. c_p
capt_planit said:
Here are a cache and system image from the AT&T variant of the phone. @awwar can you be more specific. You are in a boot loop? No recovery?? Device recognized by Odin/Heimdall??? I am VERY interested in providing a way to unbrick our phones but am unwilling to brick my only device. If you want to try something post here and I will provide what support I can.
Click to expand...
Click to collapse
have you pit -file to AT&T firmware?
awwar said:
have you pit -file to AT&T firmware?
Click to expand...
Click to collapse
@awwar Here are recovery and boot images and pit file from AT&T version of phone Build # JDQ39.C105AUCUAMJ2. Kies may not be able to restore if you have a damaged bootloader source. But, on a plus note, "I haven't run into anyone yet who couldn't undo soft brick from Odin" source
capt_planit said:
@awwar Here are recovery and boot images and pit file from AT&T version of phone Build # JDQ39.C105AUCUAMJ2. Kies may not be able to restore if you have a damaged bootloader source. But, on a plus note, "I haven't run into anyone yet who couldn't undo soft brick from Odin" source
Click to expand...
Click to collapse
Nothing changed, I flashed whith this firmwares but error. This firmware is too large.
@awwar Ok man, thanks for testing. I hope your skills extend further than the average windows user. You have to extract the files and then repackage them for odin as tar.md5. I think you can do it in windows but I can only talk you through it if you are using linux. I am not sure which image to flash first but Faisalkhan.007 in the first page suggests doing it one file/partition at a time. I would flash my recovery and on reboot try using volume up and home to get to the newly flashed recovery. I think you are getting file too large because you've got more than one file in your flash package. Restore the pit file as a last attempt after trying to flash each partition. I'd love to figure out how to pass you the bootloader only but I've got another project ahead of this. Did you look at some of those links? Try this (search for download mode on the page) if you are having trouble getting to download mode. And this is for osX but might help too. The errors you are getting don't sound like the one I get. I upload an entire file then fail at 100% for an unknown reason. The Heimdall guys say that is due to the locked bootloader. TLDR: Split files, flash singly, reboot and try stuff in between. c_p
Well I Really Don't Know , But Its Working For Me,
http://forum.xda-developers.com/picture.php?albumid=13143&pictureid=53644
http://forum.xda-developers.com/picture.php?albumid=13143&pictureid=53643
awwar said:
Nothing changed, I flashed whith this firmwares but error. This firmware is too large.
Click to expand...
Click to collapse
Okay Wait I Am Gonna Upload Flash able Tar System & Cache files On Cloud When its Done, i will send You Link, :good:
awwar said:
Don t work to me.
Click to expand...
Click to collapse
https://mega.nz/#F!SFhCnIIb!D7QIX-Xmkd8aZBfU_-2PIg
Try It
I have *three (3)* SM-C105A S4 Zoom Camera phones by Samsun and enjoy them. I have upgraded firmware on 2 so that I can use Remote ... uh, is it Viewfinder? And it works. Not to the point. What I *lost* was compatibility with *ooooooold* Photo Elements. Which, at age 57 I like to use and don't want to relearn. I run it on a virtual XP. What makes this post relevant is that *third* S4. It *hasn't* upgraded. Cracked screen, disused, but I crammed.. well, a bit of fibrous matter...OK , a ciggy-butt, in the battery door, with a rubber-band, to hold a fresh battery in place, ... and it's booting now. So, please give me a month to extract the firmware, yes it is AT&T and also upload Photo Elements, firmware from old and upgraded, to continue the discussions, or not, and to try cloning the two to restore my ability to post process nudies shot with my camera phones. And other pics. I wrote an AI MathCAD program to postprocess nudies (it's fine art fer heaven's sake) that actually simualted the artist's brush strokes. More on all this in I hope a month.
DGoncz
---------- Post added at 01:39 PM ---------- Previous post was at 01:22 PM ----------
No, back when, I must have applied, not the most recent upgrade, but the intermediate of the three versions.....and all hope is lost. Photos from the oldest S4 I have do *not* open in Photo Elements. None of my cameras produce photos that open in Photo Elements any longer...but they did. I opened an older photo just now.
Dang these upgrades. The message says the JPG file is missing a segment. Phooey.
I have a business account with Samsung and will open a support ticket.
I will not pursue the hack angle for now.
Samsung may help me.
Cheers,
DGoncz
DGoncz said:
I have *three (3)* SM-C105A S4 Zoom Camera phones by Samsun and enjoy them. I have upgraded firmware on 2 so that I can use Remote ... uh, is it Viewfinder? And it works. Not to the point. What I *lost* was compatibility with *ooooooold* Photo Elements. Which, at age 57 I like to use and don't want to relearn. I run it on a virtual XP. What makes this post relevant is that *third* S4. It *hasn't* upgraded. Cracked screen, disused, but I crammed.. well, a bit of fibrous matter...OK , a ciggy-butt, in the battery door, with a rubber-band, to hold a fresh battery in place, ... and it's booting now. So, please give me a month to extract the firmware, yes it is AT&T and also upload Photo Elements, firmware from old and upgraded, to continue the discussions, or not, and to try cloning the two to restore my ability to post process nudies shot with my camera phones. And other pics. I wrote an AI MathCAD program to postprocess nudies (it's fine art fer heaven's sake) that actually simualted the artist's brush strokes. More on all this in I hope a month.
DGoncz
Click to expand...
Click to collapse
@DGoncz You could do that, or, you could just do a complete wipe/reset. Should be 4.2.2 after that. You may also be able to use a hex editor to set the start of the jpeg file to whatever your proggie wants to see. Good luck c_p
Hi, I just joined this forum and I'm hoping you guys can help me with my problem:
I have an S9+ with the FRP Lock on, a guy on Reddit told me that there is a way to unlock it. The phone in question is a SM-G9650 made in Argentina. And the other number that appears on the recovery menu when you do the Bixby + Vol Up + Power button is G9650ZHS6CSK4.
I've downloaded the correct firmware (I think that version was Android 9.0) for that number up there, and when I try to flash the phone with Odin, everything goes great, I first flash the AP file and the phone reboots, but it doesn't boot into "Factory Binary Mode" it just goes straight to the normal phone setup and in Odin I get no errors as you will see in the screenshots below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, what am I doing wrong? If I'm missing the combination ROM does anybody know where to find it? Please if any of you can help me I would be grateful!
Have a nice day!
Flameon266 said:
Hi, I just joined this forum and I'm hoping you guys can help me with my problem:
I have an S9+ with the FRP Lock on, a guy on Reddit told me that there is a way to unlock it. The phone in question is a SM-G9650 made in Argentina. And the other number that appears on the recovery menu when you do the Bixby + Vol Up + Power button is G9650ZHS6CSK4.
I've downloaded the correct firmware (I think that version was Android 9.0) for that number up there, and when I try to flash the phone with Odin, everything goes great, I first flash the AP file and the phone reboots, but it doesn't boot into "Factory Binary Mode" it just goes straight to the normal phone setup and in Odin I get no errors as you will see in the screenshots below:
So, what am I doing wrong? If I'm missing the combination ROM does anybody know where to find it? Please if any of you can help me I would be grateful!
Have a nice day!
Click to expand...
Click to collapse
YOU have a great day!!!!! Stop telling people what to do!! (totally joking)
all joking aside, yes, the combination file is the way to get past FRP. I have not looked at your file to make sure its the combination file needed in order to get past FRP, but that is indeed the process. You flash the combo firmware (not called a ROM) and then the phones actual firmware you need and the phone shouldnt ask for the google account info anymore.
Reddit is a good place to have quick conversations about how to address issues, but youll find that 99% of the people over there just refer back to XDA. Wonder why! LoL Anyways, ill look at the file you posted, but i am at work so some of my research will be limited due to the vile creature called Citrix.
here is a link that Citrix wouldnt let me get to due to the net nanny configured within the evil bastard Citrix.
https://combinationfirmware.com/combination-samsung-galaxy-s9-plus/
i cannot verify that link due tho the aforementioned evil gremlin Citrix, more so the netnanny, but you get my point
Thanks! I'll get started
Youdoofus said:
YOU have a great day!!!!! Stop telling people what to do!! (totally joking)
all joking aside, yes, the combination file is the way to get past FRP. I have not looked at your file to make sure its the combination file needed in order to get past FRP, but that is indeed the process. You flash the combo firmware (not called a ROM) and then the phones actual firmware you need and the phone shouldnt ask for the google account info anymore.
Reddit is a good place to have quick conversations about how to address issues, but youll find that 99% of the people over there just refer back to XDA. Wonder why! LoL Anyways, ill look at the file you posted, but i am at work so some of my research will be limited due to the vile creature called Citrix.
here is a link that Citrix wouldnt let me get to due to the net nanny configured within the evil bastard Citrix.
i cannot verify that link due tho the aforementioned evil gremlin Citrix, more so the netnanny, but you get my point
Click to expand...
Click to collapse
Thanks! I'll get started with that link, I'm not near my PC right now so I can't check the link comfortably, anyways from what I saw I didn't see the specific one that matches this code *G9650ZHS6CSK4* completely, does it has to be the EXACT same?
Flameon266 said:
Thanks! I'll get started with that link, I'm not near my PC right now so I can't check the link comfortably, anyways from what I saw I didn't see the specific one that matches this code *G9650ZHS6CSK4* completely, does it has to be the EXACT same?
Click to expand...
Click to collapse
no, it doesnt have to be the exact same, but certain parts are important. G9650 phone model #ZHS6 bootloader versionCSK4 build version
Youdoofus said:
no, it doesnt have to be the exact same, but certain parts are important. G9650 phone model #ZHS6 bootloader versionCSK4 build version
Click to expand...
Click to collapse
So, technically can I just use any combination firmware with the G9650 part in this case? I've been googling earlier but I haven't found one that completely matches that code, most likely I'm not looking on the right places
Flameon266 said:
So, technically can I just use any combination ROM with the G9650 part in this case? I've been googling earlier but I haven't found one that completely matches that code, most likely I'm not looking on the right places
Click to expand...
Click to collapse
model number and bootloader revision are the only really important parts as far as getting the phone to boot and/or not brick, the rest is mostly to determine which security update its on and what carrier its for
also the images in the OP dont show even on my daily driver home computer. I could check on one of the others too, but i dont think thats necessary.
Youdoofus said:
model number and bootloader revision are the only really important parts as far as getting the phone to boot and/or not brick, the rest is mostly to determine which security update its on and what carrier its for
also the images in the OP dont show even on my daily driver home computer. I could check on one of the others too, but i dont think thats necessary.
Click to expand...
Click to collapse
Hi again, I started looking for a combination firmware that matches the model number and bootloader but I haven't found any, can you help me out?
Flameon266 said:
Hi again, I started looking for a combination firmware that matches the model number and bootloader but I haven't found any, can you help me out?
Click to expand...
Click to collapse
hello, please excuse the sarcasm in my reply, but here ya go
https://bit.ly/2TPgiPU
sorry, couldnt help myself
Youdoofus said:
hello, please excuse the sarcasm in my reply, but here ya go
https://bit.ly/2TPgiPU
sorry, couldnt help myself
Click to expand...
Click to collapse
So, let me see if I understood correctly, even though my phone's version is G9650Z, the G965U will work just fine? I get the joke but at the same time, what I meant is that I couldn't find any combo firmware that has the G9650ZHS6 in the name
Flameon266 said:
So, let me see if I understood correctly, even though my phone's version is G9650Z, the G965U will work just fine? I get the joke but at the same time, what I meant is that I couldn't find any combo firmware that has the G9650ZHS6 in the name
Click to expand...
Click to collapse
im glad the art of humor isnt entirely lost here these days!! honest to god
G9650ZHS6 is the first part of your devices firmware, but the firmware combination file you want doesnt need to exactly match the first part tho. From what you have here, its telling you that the G9650 is the model number, the HS6 part is the bootloader, but in the US models, there are 2 characters following the model number representing the country code but this one only has one before the bootloader version. So, as long as the combination file is the same model number and the same bootloader version, it should be just fine. Odin will fail if you try to flash a BL revision lower than what is currently on the phone and i wouldnt recommend going higher if avoidable as you cant go back to a previous BL version once youve installed a newer one.
Youdoofus said:
im glad the art of humor isnt entirely lost here these days!! honest to god
G9650ZHS6 is the first part of your devices firmware, but the firmware combination file you want doesnt need to exactly match the first part tho. From what you have here, its telling you that the G9650 is the model number, the HS6 part is the bootloader, but in the US models, there are 2 characters following the model number representing the country code but this one only has one before the bootloader version. So, as long as the combination file is the same model number and the same bootloader version, it should be just fine. Odin will fail if you try to flash a BL revision lower than what is currently on the phone and i wouldnt recommend going higher if avoidable as you cant go back to a previous BL version once youve installed a newer one.
Click to expand...
Click to collapse
So, in this case, I already have the model number which is G6950, now, I need to find one that has the "S6" in it, being that, the bootloader version I'm looking for right?
Youdoofus said:
im glad the art of humor isnt entirely lost here these days!! honest to god
G9650ZHS6 is the first part of your devices firmware, but the firmware combination file you want doesnt need to exactly match the first part tho. From what you have here, its telling you that the G9650 is the model number, the HS6 part is the bootloader, but in the US models, there are 2 characters following the model number representing the country code but this one only has one before the bootloader version. So, as long as the combination file is the same model number and the same bootloader version, it should be just fine. Odin will fail if you try to flash a BL revision lower than what is currently on the phone and i wouldnt recommend going higher if avoidable as you cant go back to a previous BL version once youve installed a newer one.
Click to expand...
Click to collapse
I found this combo file G9650ZCU6ASJ2 , will it work? One more thing, the phone right now is on Android 9.0 and the combo I downloaded has "FA80" on the name, which, according to what I've read, it's Android 8.0, do I need to downgrade the phone to 8.0? Can I just flash the 8.0 firmware into it and then continue?
Flameon266 said:
I found this combo file G9650ZCU6ASJ2 , will it work? One more thing, the phone right now is on Android 9.0 and the combo I downloaded has "FA80" on the name, which, according to what I've read, it's Android 8.0, do I need to downgrade the phone to 8.0? Can I just flash the 8.0 firmware into it and then continue?
Click to expand...
Click to collapse
the android version doesnt really matter too much (outside of the requirement of factory resetting when going between versions usually). I am not 100% that the file you listed will work, but as long as it is for your device and is the correct bootloader version, it wont harm it.
Youdoofus said:
the android version doesnt really matter too much (outside of the requirement of factory resetting when going between versions usually). I am not 100% that the file you listed will work, but as long as it is for your device and is the correct bootloader version, it wont harm it.
Click to expand...
Click to collapse
And now I have another problem, when I flash it with the combination firmware, it starts and then immediately after Odin says "Fail" and the phone shows this:
FRP is enabled, ignore PIT download.
FRP is enabled, not allowed to download non-FRP abl binary.
What could it be?
Flameon266 said:
And now I have another problem, when I flash it with the combination firmware, it starts and then immediately after Odin says "Fail" and the phone shows this:
FRP is enabled, ignore PIT download.
FRP is enabled, not allowed to download non-FRP abl binary.
What could it be?
Click to expand...
Click to collapse
are you using patched Odin?
Youdoofus said:
are you using patched Odin?
Click to expand...
Click to collapse
Hmmmmm, no? I've downloaded the latest available version from the Odin site
Flameon266 said:
Hmmmmm, no? I've downloaded the latest available version from the Odin site
Click to expand...
Click to collapse
get this version and give it a try
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Youdoofus said:
get this version and give it a try
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Click to expand...
Click to collapse
Tried both patched versions attached in the post, none of them worked. Same issue.