Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
delictis said:
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
Click to expand...
Click to collapse
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
rjspark89 said:
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
Click to expand...
Click to collapse
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
delictis said:
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
Click to expand...
Click to collapse
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
rjspark89 said:
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
Click to expand...
Click to collapse
TNX for your time and help
I'll try to flash that ROM and let you know.
I hope that works.
TNX
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
delictis said:
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
Click to expand...
Click to collapse
i think the problem.. is that.. see to sometimes.. custom recovery.. like cwm and twrp doesn't really work well when you try to flash stock ROMS.. so.. do you have your stock recovery? if so try going into download mode/pink screen mode ..replace cwm with your stock recovery.img.. then try updating again..
Huawei Ascend y210-100
Hello everyone,
I have a problem with my new Huawei Ascend Y210-100 Mobile. I wanted to root it but I go wrong. Because i have ran the ClockworkMod Recovery 5.0.2.8 For V8404-Y210-By Gocmobile.net.zip for Y210D. (S.H.I.T.) Grrrrrr.
My Y210 do stupid things The phisical buttons do functional full badly.
WI-FI and HotSpt don't work.
I have found the Factory firmware on Huawei support site but i am not able to upgrade the Factory ROM. Unpack and the install section stopped.
Here is the all found Firmwares and websites:
ORIGINAL Factory Firmware: h t t p://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
This was another ROOT method: w w w.symbianize.com/showthread.php?t=929464 (I don't suggest.)
And this was the BAD choice!!!!!: !!!ONLY Y210D!!!
h t t p ://ge.tt/8ZscJic/v/0?c
PLEASE PLEASE Huawey GURUs Help me.
Thanks a lot for every useful advice.
Tony (HUN)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST one more request.
Does anybody an original Huawei ascend 210-100 Factory firmware saved backup (without personal datas of course!!!) by ClockWorkRecovery PLEASE???
Could someone do a factory firmware backup and send to me Please Please PLEASEEEEE?
begi.76 @ gmail .com (put in formal email format)
did anyone reply you?
helping a friend to root/custom rom this phone, but not many good results.
no CM7, no ICS.... only found GB and GB themed like ICS
GB themed like ICS
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Factory FW (GB), unzip read instructions.
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
Is anyone currently doing a DEV for this unit?
Good Morning Sir,
No, nobody sent me flash file yet.
But I asked help just 2 days before.
Thanks for your help. I will try to do ASAP.
I will send feedback imediately as soon as work well.
PS: sorry 4 my bad English. I hope almost clear for everyone who read it.
Thanks,
Tony
---------- Post added at 10:06 AM ---------- Previous post was at 09:39 AM ----------
Hello Again,
I try to use the GB original firmware already.
I couldn't flashing the ROM. It was write in the first note.
As you can see in the pictures.
Something is go wrong with the CRW install (y210D )
Maybe the fastboot or something other because the 210D options available in my 210-100. I mean the HOME, BACK, MENU buttons working like in case 210D.
The SD card flashing not working. (cry, cry, cry)
I can find this informations in the sd_update.log:
"filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
"
Someone can unpack the app file? Maybe there can find the solution.
Thanks,
desperate Tony. (HUN)
Is your CWM working or not working, you no mention.
Flash CWM method 1
http://androidarea51.com/***-all-things-root-***-287/cwm-n-root-for-the-huawei-y210-build-b865/
Flash CWM method 2
http://myhvgagames.blogspot.sg/2013/08/3-in-1-stock-recovery-clockworkmode.html
Once you have CWM (or already using), flash this. (i am using for Y210-100)
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Below 2 for Y210D, have flash wifi can connect but no stable, Home/Menu/Back keys all jumble up also
Code:
VIETTEL-V8404-face-JB-By-Gocmobile.Net.zip
Code:
v8404-GMB-05-ModS4-ICS.zip
If you still problem, please download factory and try flash to stock.
Hi,
Yes the CWR working well. I can make backups and every function working as well.
I have tried some rooting method but no one worked.
The truth, I didn't want to install CWR just I wanted to ROOT my mobile.
Reason: Too less memory makes slow the phone, and write it "too less memory pls delete some program etc..."
But ones, after the y210D CWR install, I can root the phone with SuperOneClick 2.3.3. (yeeeeeeeeaaaaaaah)
ROOT, UNROOT, SHELL ROOT working well ( I said excellent.)
AFTER: Just I can't use HOME/BACK/MENU keys and WI-FI. (Cry)
Summary.
I'd like install the factory Firmware (I am not able to do this because it is freezing on 2nd step.) You can see in previous 2 pictures.
I'd like rooting the phone. Reason: intstall or moving programs to SD card.
I wouldn't like install the CWR because no need it for me.
Something BAD thing happend during the CWR install with 210D, because after the boot I have experience the functionality difference.
Okey I think maybe a bit difficult my English. If something no clear please write here and i will try to rephrase that.
Thanks.
Tony.
Hey! It would be a problem, I tried to ask one of the CM rom on Huawei Y200, and everything is done as it should, but the phone will go only to the boot LOGO .... Somebody help me!
Tapatalk 2-vel küldve az én Optimus 4X HD-ről
for
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
mandroid76 said:
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
Click to expand...
Click to collapse
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
bob4x4 said:
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
Click to expand...
Click to collapse
u should research more... original rom and instructions provided. ive done it before sometime back.
felix_fx2 said:
u should research more... original rom and instructions provided. ive done it before sometime back.
Click to expand...
Click to collapse
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
bob4x4 said:
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
Click to expand...
Click to collapse
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
felix_fx2 said:
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
Click to expand...
Click to collapse
thank you very much.
i've downloaded thes two..
HUAWEI_Y210_firmware（Y210-0100%2CAndroid 2.3%2CV100R001C00B856%2CNormal%2C05011DPY）
And
Ascend_Y210(Y210-0100_Android_2.3_V100R001C00B839_Normal_05011DPY)
think maybe something goes wrong in the rom custom that i've installed.
no news?
best regards.
Related
Hello, sorry for my long absence. Now I'm updating this thread as I do not have the time to create the firmwares. So the objective of the thread is:
To give simple instructions on how to create your own firmware. I am going to assume that you already know how to:
1. Read and follow instructions.
2. Change extensions of files.
3. Extract files.
4. Use the flashtool.
5. Create a .tft file.
If you answer no to any of this questions, please investigate a little or do not attemp to do this.
Now, the instructions:
1. Go to this website http://www.omnius-server.com/ and register.
2. Now that you have registered and logged in, go to this link http://www.omnius-server.com/downloads?id=58117. You should get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now search for the firmware you are looking for in any of the folders. I'm going to choose the folder R1FA016, and the file X10a_CLARO_GT_NAM1_1234_4844.rar. But it is going to work with any.
4. Now download it and create a new folder on the firmware folder of the flashtool and put it on there. Extract it and you should get two .rar files (if not, just change the extension to .rar). Extract them both on the same folder. You should get a lot of .sin files and a .xml file.
5. Now you have to rename some files with a name like this:
5.1. This one: "system_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin" to "system.sin"
5.2. And this one: "userdata_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE.sin" to "userdata.sin"
Now you have a list of files like this: (the files that you have to change the name can vary depending on the firmware but the part you have to delete is going to be te same (_S1-SW-LIVE-AC12-0001-S1-PARTITION-WITH-SPARE), for example, so be sure to take a look to the picture if you are not so sure how a name should be)
6. Now create the .tft bundle and flash it.
7. Enjoy the phone with the firmware you created.
If this was helpful for you click on the THANKS button.
P.S.
I'm not responsible for any damage you do to your phone.
If you are going to take the time to create all the firmwares, give me the appropiate credit .
Sorry for my english if there is any mistake, I speak spanish.
If you have any sugestion you can PM me and I will be happy to help.
HTML:
Thank you for this!! I didn't have the Claro Guatemala firmware and I needed it for warranty purposes...
Sent from my AOSP on Xperia (GT)
Is it possible to have the Vodafone branded ROM for The Netherlands?
I've made a backup before I did the Nordic 2.1 update, but for some reason I can't use it with the above...
I'm getting an "Unable to open channel, GetLastError=0" message after pressing option 1 and connecting the X10 in flash mode...
I'm using Windows 7 Ultimate 32-bit with JRE and JDK 6u23 installed...
DaDude1973 said:
Is it possible to have the Vodafone branded ROM for The Netherlands?
I've made a backup before I did the Nordic 2.1 update, but for some reason I can't use it with the above...
I'm getting an "Unable to open channel, GetLastError=0" message after pressing option 1 and connecting the X10 in flash mode...
I'm using Windows 7 Ultimate 32-bit with JRE and JDK 6u23 installed...
Click to expand...
Click to collapse
If you get this error you have added WRONG device ID. Maybe you have not only ONE in registry. Try finding another one! If that doesn't work, please install SEUS one time, via SEUS put your phone in Flash Mode and the unplug it; that way SEUS will install the drivers and you'll have your DEVICEID, then go to the notepad called "DEVICEID" and put it in there. Try Reflashing again.
Let me know if this help you.
jimbo77 said:
If you get this error you have added WRONG device ID. Maybe you have not only ONE in registry. Try finding another one! If that doesn't work, please install SEUS one time, via SEUS put your phone in Flash Mode and the unplug it; that way SEUS will install the drivers and you'll have your DEVICEID, then go to the notepad called "DEVICEID" and put it in there. Try Reflashing again.
Let me know if this help you.
Click to expand...
Click to collapse
Thanks, but I've tried to find another DeviceID and can find only one, even if I use another USB port on my laptop...
I'm now installing SEUS, maybe that's the solution...
It's installing JRE also, so maybe the JRE version I've installed wasn't the good one?
Will let you know, thanks!
I'm now uploading the vodafone NL firmware. Just wait for it.
Yes! Seems to be working now, I see a lot of INFO: write commands on my screen!
Thanks for your help, hope to get the Vodafone branded 1.6 rom back again so I can upgrade to the Vodafone 2.1 branded rom, thanks!
oalf170892 said:
I'm now uploading the vodafone NL firmware. Just wait for it.
Click to expand...
Click to collapse
Thanks for the quick response!
DaDude1973 said:
Yes! Seems to be working now, I see a lot of INFO: write commands on my screen!
Thanks for your help, hope to get the Vodafone branded 1.6 rom back again so I can upgrade to the Vodafone 2.1 branded rom, thanks!
Click to expand...
Click to collapse
You're welcome pal..!! Let us know if that helped you and probably you can help us with a small donation
Have a great Day!
jimbo77 said:
You're welcome pal..!! Let us know if that helped you and probably you can help us with a small donation
Have a great Day!
Click to expand...
Click to collapse
Donation will certainly be done if everything works!
Have a great day too!
Thanks again...
Firmware you wanted is uploaded
There you go... now just download and follow the steps.
DaDude1973 said:
Donation will certainly be done if everything works!
Have a great day too!
Thanks again...
Click to expand...
Click to collapse
Yes! This really worked for me, I was back on the Vodafone branded 1.6 ROM and I'm now updating to the Vodafone branded 2.1 ROM as we speak!
You guys rock!
Donation will be made soon, I first have to update my own paypal account...
I also will tweet this page to my Twitter and Facebook, so you will get more traffic I hope!
Thanks again!
oalf170892 said:
for cases in wich you flashed a firmware on your x10 that isn't from your country or operator, and now your operator has released the 2.1 update (still not my case), and you want to run your operators firmware in case of any incident with your phone.
Click to expand...
Click to collapse
If you have 2.1 already and your network has also released it, you can use - [TUTORIAL] -Simple way to switch from one 2.1 version to another - to save having to flash twice.
XperiaX10iUser said:
If you have 2.1 already and your network has also released it, you can use - [TUTORIAL] -Simple way to switch from one 2.1 version to another - to save having to flash twice.
Click to expand...
Click to collapse
Yes, that is working, but you have to root your phone to acomplish that, and if your phone is rooted, you have lost all waranty both Sony Ericsson and your Operator. And over that, all the custom of your Operator is not going to be on your phone.
Thats why flashing 2 times isn't that hard to gain waranty back.
DaDude1973 said:
Yes! This really worked for me, I was back on the Vodafone branded 1.6 ROM and I'm now updating to the Vodafone branded 2.1 ROM as we speak!
You guys rock!
Donation will be made soon, I first have to update my own paypal account...
I also will tweet this page to my Twitter and Facebook, so you will get more traffic I hope!
Thanks again!
Click to expand...
Click to collapse
Is nice to hear that you have now your 2.1 android vodafone costume version.
And remember if this is working for you Recomend and Donate.
Enjoy your x10!!!
oalf170892 said:
Yes, that is working, but you have to root your phone to acomplish that, and if your phone is rooted, you have lost all waranty both Sony Ericsson and your Operator. And over that, all the custom of your Operator is not going to be on your phone.
Thats why flashing 2 times isn't that hard to gain waranty back.
Click to expand...
Click to collapse
Perhaps you've missed the point, that method allows you to flash a branded rom back to the phone via SEUS, so once you flashed, you've lost root and got a branded rom back on the phone.
Firmware Movistar 016 España
I uploading the link for flash firmware donut Movistar Spain.
http://www.megaupload.com/?d=3O33P3H7
question Device ID
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
vinny.1967 said:
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
Click to expand...
Click to collapse
Look, for the Device ID you should have something like this "5&34B1332A&0&5". I can't answer your question because i have never use adb.
But, to get your Device ID, before coping the firmware files to firmware_1, open it and run the x10flash and conect your x10 in flash mode, and a new file named DeviceID.txt ahould have been created. Open it and you should have your Device ID.
Hope to be Helpful
vinny.1967 said:
just a quick question the devices id number is the same number as when you in cmd adb device listing??? thanx
Click to expand...
Click to collapse
This is hoe you can get your DeviceID on Windows...
1: press start (or windows icon) and in the run box type "regedit" without the ""
2: click edit>find, and type in "Vid_0fce&Pid_adde". You should find "DeviceInstance". Copy the last section of that, it should look something like "5&2888d0ff&0&1" 2.1: If that fails to see anything, make sure "Match whole string" is un-ticked, and click "find next", if that fails, try "USB\VID_0FCE&PID_ADDE" Note: It changes with every diffrent USB port you use....
I hope this helps to clarify..
Sent from my X10i
As title.pls. help.
yes.
tailangon2 said:
As title.pls. help.
Click to expand...
Click to collapse
Download boot pacthed from her *****http://yadi.sk/d/ZcZUWbkTirEO****. After download flashed it using flashtool. For root use UNLOCKROOT download from unlockroot.com
problem solved.tq.
i still unable to root the phone. and still cannot get the boot file patched.
how you do it?
could you share here step by step?
imanhunter said:
i still unable to root the phone. and still cannot get the boot file patched.
how you do it?
could you share here step by step?
Click to expand...
Click to collapse
Flash tool tutorial
http://colonelzap.blogspot.co.uk/search?q=n9770
fadhil3536 said:
Download boot pacthed from her *****[]//yadi.sk/d/ZcZUWbkTirEO****[l]. After download flashed it using flashtool. For root use UNLOCKROOT download from unlockroot.com
Click to expand...
Click to collapse
Help. downloaded the boot patch file..It is an img file. Flashtool only recognizes FTF file. Help newbie here.
afwong said:
Help. downloaded the boot patch file..It is an img file. Flashtool only recognizes FTF file. Help newbie here.
Click to expand...
Click to collapse
Managed to get it rooted with both SuperOneClick and UNLOCKROOT. Well, at least these 2 apps reported that the phone is successfully ROOTED. However, when check with RootChecker and Root Checker Basic from Google Play, both apps said the phone not rooted.
So which is which? Superuser is in the phone and Terminal Emulator accepted the "SU" command...
My N8000+ has JB 4.1
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
Appreciate if you could do a ROM dump and share
mdashraf said:
Appreciate if you could do a ROM dump and share
Click to expand...
Click to collapse
If you can tell me how to dumb ...
I need info about rooting jb, anyone can help?
plz share
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
plz share the JB 4.1 rom ... :angel:
want to update my star n8000+
N8000+ with JB 4.1
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
Hi Textwiller,
Did you managed to root your N8000+ JB 4.1? Just curious.
I managed to root my N8000+ JB 4.0 set but not the set with JB 4.1.....
Have a very tough time to get the Star N8000 4.1.1 rootted
Can anyone help, please?
I have tried everything, from OneClickRoot, UnlockRoot, Root with Restore (V25) - and they all fail.
It seems like the filesystems cannot get remounted - even after busybox has been copied to the /data/.... directory.
Any ideas?
I want this rooted and install a "better recovery" - The one that is currently on the phone is in Chinese....
My current ROM is: e1908_v77_jbl1_9p017_6628 build date: 20121220
Thanks
bert269 said:
Can anyone help, please?
I have tried everything, from OneClickRoot, UnlockRoot, Root with Restore (V25) - and they all fail.
It seems like the filesystems cannot get remounted - even after busybox has been copied to the /data/.... directory.
Any ideas?
I want this rooted and install a "better recovery" - The one that is currently on the phone is in Chinese....
My current ROM is: e1908_v77_jbl1_9p017_6628 build date: 20121220
Thanks
Click to expand...
Click to collapse
Try this, http://forum.xda-developers.com/showpost.php?p=31126124&postcount=107
Mine is still on 4.0.1. I tried it on my second set on 4.1.1. It seems to be rooted. but some apps couldn't run reported it requires root....so.puzzled!
I also need to root my N8000+, i tried rooting it before but my ignorance of these chinese phones ended me up a few days of getting things back to normal, i do believe i need to flash patched boot file, then use rooting tool. correct? I have 4.1.1 please let me know if someone can successfully root this phone. also, what do you guys use for a front camera driver? thanks
i also have been looking to root the star n8000 mdk 6577 rom build i beleave is e1908_v77_jbl1_9p017_6628 i have been serching for a few moths now and nothing i cant get nowhere i cant read german nor chinse can we get some help with this phone please someone somewhere
So I guess we're not getting any help on this I have been surching hi and low and found nothing there so much for the mtk 6575 but nothing for the 77 so I'm not sure what's up with that I know some of the root programs I have tried says that it won't mout as read write so I don't know its kinda agervating but when u buy a phone u get what u pay for I mean it is a great phone fast but crappy reception I just wanna see if a u.s ROM would help the reception and speed if I new how to make a root program it do it or if someone made one it test it same with the Roms I have two phones Samsung s2 and the star note n8000+
Sent from my SGH-I777 using xda app-developers app
Use superone click
Finally got it rooted - here's how.
Hi all, my first post on xda-developers
I was really annoyed by the fact that no procedure seemed to work on my Star N8000+ (JB 4.1.1) e1908_v77_jbl1_9p017_6628 ORIGINAL STOCK ROM. I tried everything, from SuperOneClick to chinese rooting software... Nothing seemed to work. And since I have an untouched stock rom, and I had no wish to reflash the phone, I was left in the dark.
But, after lots of searching, experimenting and tons of trial-and-error with trying to understand scatter files and partitioning stuff, I finally managed to root my device with no need to use adb or to reflash the phone.
I'm posting a step-by-step guide for complete noobs like me. So here's the method I used (hope it works for all of you who aren't getting any luck with other methods, just like I was):
Download this file N8000+e1908_v77_jbl1_9p017_6628-Root.zip and copy it to your phone's sdcard;
Enter the phone's system recovery menu:
Turn phone OFF;
Hold Volume + key and turn phone ON. Keep holding Volume + until the below robot picture shows on your device. When it appears you can release the Volume + key;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press the menu touch key (on the left of the phone's home button). A list of options will appear.
Using the Volume + or - key, highlight the "apply update from sdcard" option and press the phone's home button;
Using the Volume + or - key, find and highlight the N8000+e1908_v77_jbl1_9p017_6628-Root.zip file you've already saved on your sdcard (step 1). Once highlighted, press the phone's home button. Update will start;
When the update finishes, reboot your phone by using the Volume + or - key to select the "reboot system now" option and then press the phone's home button. Phone will reboot normally.
After all this, you should have root access to your phone
Files included on zip:
su v. 1.27
SuperSU v. 1.30
BusyBox v. 1.20.2
As always people mention when posting such procedures (and I think they are right), do it at your own risk. Although I feel and think that the above method is pretty safe and harmless, I will take no responsibility for any damages your phone may suffer. If you feel insecure about anything, just browse the sources on the zip package to check that the contents do not intend to harm your phone. I can assure you that I did all this just to try to help everybody who's out there, lost with rooting this wonderful device.
The above procedure worked flawlessly on my Star N8000+ (JB 4.1.1) e1908_v77_jbl1_9p017_6628 ORIGINAL STOCK ROM. If your phone version is different, it may or may not work. I think no harm could be done by trying (I guess the worst thing that could happen was the update to be refused to be applied due to certification incompatibility or wrong scatter/partition info). Once again, do it at your own risk.
Bonus: un-Root.
If you managed to successfully root your device using the above procedure, then you can undo it (unroot) by following the same above steps again, but instead of using the original zip file posted on step 1 use this one: N8000+e1908_v77_jbl1_9p017_6628-Root-UNINSTALL.zip
Hi all, after a great effort and lot of work finally i got cm9 compile from source working in my s7 model 105.
this is a more stable version it still has some bugs that i'm trying to solve, help is welcome.
I used kernel from jotamj from another forum and i use asturel device files to get it started, asturel files is for the slim so i had to made some changes in the files, thanks to them.
For a long time i hope for a update from huawei but notthing came, people at huawei suck, they dont give any suport to there clients, so i and other had to do it in order to have cm9 or cm10 in huawei s7.
this work on:
my s7 model=105, it may work on 104 and in 106, probably will not work on s7 slim
what works:
-wifi
-bluetooth
-audio
-gps
-google play (solve, install gaps file)
-streaming (must install flash player 11)
do not work:
-camera
-usb mount on pc
how to install:
first do a backup, IMPORTANT , backup first ( in case same thing go wrong)
copy file zip to sdcard
boot on cwm and install zip file
reboot and wait 4 to 5 minutes, if anything goes wrong restore from backup.
version 53 (more stable)
link: https://docs.google.com/file/d/0B9OIKoN0knUtSGNfVWpOSjBqNEE/edit?usp=sharing
to solve google play install gaps
link: https://docs.google.com/file/d/0B9OIKoN0knUtUTdSQUpERHhfYTg/edit?usp=sharing
help is welcome,
install on your device, test what work and what does not, google for solutions on the bugs you find, post solution here, i will aplly it to the next version, that way we can have a cm9 working 100% in very little time
in the case you can post, write a message to me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
to do next:
-correct google play (solved)
-camera
test it
hal_2000
Huawei isn't to blame I think. I don't think there are many QSD8250 devices that made it past Gingerbread. Acer (Liquid, Liquid E) and HTC (Desire) left their devices on Froyo. Dell (Streak 5) moved up to Gingerbread.
I have given my S7 away to a family member and won't be changing the firmware, but thanks for putting this together.
That's a weird looking ro.build.fingerprint you have there. Fix in cm.mk for build. Play Store also freaks out if you have a date too far from the present.
xaueious said:
Huawei isn't to blame I think. I don't think there are many QSD8250 devices that made it past Gingerbread. Acer (Liquid, Liquid E) and HTC (Desire) left their devices on Froyo. Dell (Streak 5) moved up to Gingerbread.
I have given my S7 away to a family member and won't be changing the firmware, but thanks for putting this together.
That's a weird looking ro.build.fingerprint you have there. Fix in cm.mk for build. Play Store also freaks out if you have a date too far from the present.
Click to expand...
Click to collapse
Hi xaueious, when i bought my s7 it came with android 2.1, some time after huawei lunch android 2.2 for asia, i had to wait for a suedish user to hack it and lunch it for europe, they could lunch android 2.3 but they where not interest, that why i said huawei suck, other manufactures realeases updates for they clients, but not huawei.
the fingerprint of the build has to do with the system i came up with to test things, i started with asturel base devices files but that is for the slim, so i had to test what option worked or not, it took dozens of test and tries, to get it to work.
i got the google play problem solve, see post 1, and streaming to
I'm close to get a 100% working rom.
test it if you can, and help me solve the bugs if you find any, enjoy.
hal_2000
I installed your rom on my s7-105 but now it's not starting proper anymore. I see the word ANDROID and I can hear a small click every second but nothing more... what's wrong?
---------- Post added at 04:07 PM ---------- Previous post was at 03:53 PM ----------
After a re-boot I get the message "Update failed! Please retry!" No matter which key combination I try (vol+ & power, menue&green&power, oder vol+&vol-&power) this is all that I get!!!!!!! HELP PLEASE!!! What can I do now?????? How can I get back into CWM to reinstall a rom??????
after some try & error I found out that with the key combination back&red key & power I can make the device to boot, I see the words Ideos and later android again but that's all. It's not going on. I have no idea how I can install an older rom now....
grka said:
I installed your rom on my s7-105 but now it's not starting proper anymore. I see the word ANDROID and I can hear a small click every second but nothing more... what's wrong?
---------- Post added at 04:07 PM ---------- Previous post was at 03:53 PM ----------
After a re-boot I get the message "Update failed! Please retry!" No matter which key combination I try (vol+ & power, menue&green&power, oder vol+&vol-&power) this is all that I get!!!!!!! HELP PLEASE!!! What can I do now?????? How can I get back into CWM to reinstall a rom??????
after some try & error I found out that with the key combination back&red key & power I can make the device to boot, I see the words Ideos and later android again but that's all. It's not going on. I have no idea how I can install an older rom now....
Click to expand...
Click to collapse
Sounds like a boot loop. What ROM did you come from? You should be coming from Android 2.2, not 2.1.
Here's a list of stock firmware to use: http://johnnyparanoia.blogspot.co.uk/2012/04/huawei-s7-tablet-firmware-list.html
Install procedure for stock: http://www.androidtablets.net/forum...d-2-2-2-dual-camera-s7-s7v100r001c98b021.html
xaueious said:
Sounds like a boot loop. What ROM did you come from? You should be coming from Android 2.2, not 2.1.
Here's a list of stock firmware to use: http://johnnyparanoia.blogspot.co.uk/2012/04/huawei-s7-tablet-firmware-list.html
Install procedure for stock: http://www.androidtablets.net/forum...d-2-2-2-dual-camera-s7-s7v100r001c98b021.html
Click to expand...
Click to collapse
To be honest, I can't say it for sure which one I had. In the status menue it said "2.1 update 1" Whatever this means. I had problems to install the clockworkmod I finally found this ROM: rom tri_zet. With that I could install clockworkmod and reboot the tablet into recovery mode. Then I installed this rom here and run into the problem.
Last night I finally managed to install the official swedish ROM 2.2.2. With that my tablet is running again.
Do you think with that one I could make another try to install this rom now? How can I install the clockworkmode now? Maybe the tri_zet rom was the cause of the problem...
grka said:
To be honest, I can't say it for sure which one I had. In the status menue it said "2.1 update 1" Whatever this means. I had problems to install the clockworkmod I finally found this ROM: rom tri_zet. With that I could install clockworkmod and reboot the tablet into recovery mode. Then I installed this rom here and run into the problem.
Last night I finally managed to install the official swedish ROM 2.2.2. With that my tablet is running again.
Do you think with that one I could make another try to install this rom now? How can I install the clockworkmode now? Maybe the tri_zet rom was the cause of the problem...
Click to expand...
Click to collapse
Hi grka, i tryed tri_zet but i didnt liked so i used the swedish ROM 2.2.2 until recently.
My advice install cwm 6.0.1, backup and then when install, clear cache and data, then intall my rom it should work
If you get problems again restore from bacup.
1º install the rom, let it boot, after sucessul boot install gaps to make goople play work.
If you need more help ask.
hal_2000
hal_2000 said:
Hi grka, i tryed tri_zet but i didnt liked so i used the swedish ROM 2.2.2 until recently.
My advice install cwm 6.0.1, backup and then when install, clear cache and data, then intall my rom it should work
If you get problems again restore from bacup.
1º install the rom, let it boot, after sucessul boot install gaps to make goople play work.
If you need more help ask.
hal_2000
Click to expand...
Click to collapse
Can you please tell me where to download cwm 6.0.1 and how to install it? I spend some hours with downloading different files and trying to install them without success.
grka said:
Can you please tell me where to download cwm 6.0.1 and how to install it? I spend some hours with downloading different files and trying to install them without success.
Click to expand...
Click to collapse
Hi, follow this steps:
1-boot in fastboot, with device power down, click vol up+home+power , fastboot apears in screen
2-connect s7 to pc
3-extract the zip file
4-in a dos text console inside the dir where are the files execute: "fastboot flash recovery s7-recovery-v601.img"
5-to reboot "fastboot reboot"
to go to cwm, with device power down, menu+call (green key) + power on
this commands work in a windows xp, never tryied in win 7 or 8.
More help ask,
hal_2000
Hal2000 can you provide a fastboot flashable system.img?
Thank you i will test your Rom next week.
threader said:
Hal2000 can you provide a fastboot flashable system.img?
Click to expand...
Click to collapse
Hi threader, i didnt save the img file, so i compile one today with my 53 source files, here is the link: https://docs.google.com/file/d/0B9OIKoN0knUtSXU5Tm9XZUYzYms/edit?usp=sharing
one question. do you know how i can have (make) a system.img file in ext2 format, insted of a yaff2 ?
Hal_2000
I think there is a flag to make the userdata ext4 , but do not make it ext2! It is prone to dataloss if not unmounted properly, it is better to compile in ext3 and 4 support in to the kernel. But i believe if im not mistaken i have seen options to make ext images in the codeaurora sources
Under BoardConfig.mk, TARGET_USERIMAGES_USE_EXT4
Relevant: https://groups.google.com/forum/?fromgroups=#!topic/android-building/wdV3GIe_XC4
The update.zip should be sufficient for most users. Shouldn't need to provide fastboot images.
build/core/Makefile contains the rules to generate the boot, userdata,
and system images. The choice of file system for the two latter is
determined by the setting of the TARGET_USERIMAGES_USE_EXT[234]
variables, so to get ext4 for your system and userdata images you can
say
TARGET_USERIMAGES_USE_EXT4 := true
in e.g. BoardConfig.mk.
Click to expand...
Click to collapse
For the usb mount, I don't really know how to fix this at all, but the is the Acer Liquid similar? https://github.com/thepasto/liquidCM_devicetree/blob/master/acer/liquid/BoardConfig.mk
BOARD_USE_USB_MASS_STORAGE_SWITCH := true
TARGET_USE_CUSTOM_LUN_FILE_PATH := "/sys/devices/platform/msm_hsusb/gadget/lun"
(lun path needs to be fixed to match S7. I remember changing this when I kanged recovery)
xaueious said:
Under BoardConfig.mk, TARGET_USERIMAGES_USE_EXT4
Hi xaueious, thanks for those tips, always learning in this forum.
One question, is there a manual where i can learn about all the options of config files in cm9 or cm7 ?
hal_2000
Click to expand...
Click to collapse
hal_2000 said:
xaueious said:
Under BoardConfig.mk, TARGET_USERIMAGES_USE_EXT4
Hi xaueious, thanks for those tips, always learning in this forum.
One question, is there a manual where i can learn about all the options of config files in cm9 or cm7 ?
hal_2000
Click to expand...
Click to collapse
I'm not an expert at CM. I just worked on building one very specific platform and know where some files are... But from what I know...
For Android platform: http://elinux.org/Android_Build_System and https://android.googlesource.com/platform/build/+/master/core/build-system.html
If you modify specific packages, mm and mmm are nice tools to use. For building, make otapackage does a lot more crap than just making the target images (make bootimage, make systemimage). Enabling CCACHE is supposed to help with build speed too. Also consider stripping the unnecessary languages during development, and stuff builds a lot faster (PRODUCT_LOCALE flag), because a ton of time is spent building together strings.
Originally build options are mostly in /build/. CM has some new options in there, but I am not sure if they add new ones elsewhere. Other things to pay attention to are the .prop options that CM has added. Those things are littered all over and don't have documentation, but at least git commits are easy to follow.
Click to expand...
Click to collapse
Hi, thank you,
Just in case someone else as same question, TARGET_USERIMAGES_USE_EXT4 in cm9 only acepts ext4 no ext2 or ext3, i tryied all tree options.
Great tips, as always thank for taking the time to anser my questions.
hal_2000
Just installed on my S7 107 Australian version. Excellent work hal_2000. I think after install your rom , i hear some times a crackling sound.
Waiting for a fix for camera
kosmasgr said:
Just installed on my S7 107 Australian version. Excellent work hal_2000. I think after install your rom , i hear some times a crackling sound.
Waiting for a fix for camera
Click to expand...
Click to collapse
Hi, kosmasgr, the audio same times gives a click, is a little bug, the device source i used is from asturel and his files are for the slim version, i'm trying to fix the camera its more critical then the audio bug.
enjoy cm9.
hal_2000
The click is a problem from kernel that Huawei provided for 2.2.2. Kernel source is generic for both version fat and slim.
Regards to all!
Another brick I know...
I tried to install TeamWin, found this post on htcmania com showthread.php?t=591253.
Anyway on step 4. Ejecuta windows.bat the install-script I mess up recovery.img I suppose.
When I Power ON phone, I got this message:
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
...
Only have access to famous "Pink screen", tried many of update.app but every time it fails.
Also, is it necessary to unlock bootloader for this update.app, or to do something else, because it keeps fail on every firmware for G510 and Y300 that I try by now? I'm newbie to this, so sorry if is this stupid question (which I guess it is).
Is there any solution for this, any suggestions guys? Please, I'm close to breakdown.
----
Almost sure that I'm doing something wrong, tried these ROMs below (maybe some other also, but I wrote these in note later) and same error "Fail" .
B165
B166
B173
B178
B189
Anyone with idea?
I manage somehow (friend bought at same time) to find out potential ROM version, B195.
Googled for it, but no success by now.
To be specific: V100R001C00B195
Does someone have a link maybe?
Have a friend who works in phone service. They have an original ROM and he Flash it.
So for the future people who have same problem, here is explanation which I found on net:
"FAIL VERIFY IMAGE SIGNATURE":
The explanation is that the original recovery has a function to install zips with a particular firm, in this case should be Huawei.
However, almost all the ROMS officers who have taken both individual operators and Huawei for this phone have been format Update.app, installable using the "Firmware installer" phone and all had considerable weight.
But there have been some cases in which any operator like Orange Spain, used a zip supplied via OTA (like Update.app ) weighing approximately 90 MB (A minor update) whose function is to update the compilation B179 to B195, and what happens with this update zip format, is that the system makes a brief signature verification bootloader and the recovery and boot.img.
If the system detects that the Bootloader, the recovery or boot.img not have the original signature of Huawei or have been inserted through a hack or the like without having unlocked the bootloader officially, we will automatically display the following message after trying to install "Image Verify signature fail" in red letters.
The reason is surely and as I said before, we have unlocked the bootloader by an unofficial method or change some of those partitions by some hack before installing the zip, and this zip file contains the bootloader, recovery and boot.img because of their small weight, ie, is not able to replace him as the Update.app to return to the originals and leave us avoid this error signature verification.
A Update.app Bootloader completely regenerates us, so they used to solve 90% of problems. In this case we have no salvation unless there is a compilation format've tried installing Update.app or higher, and all other Update.app will Fail in the installation.
In the case of Orange model no Update.app the B195 is no compilation or compilation superior format Update.app , so we must take the SAT to have it fixed, and of course, do as we do not know what happened if we submit to third grade.
Solution is to find adequate ROM and flash with it. Mine was as I mention V100R001C00B195 and on net I can't find that one, so phone service was my destiny. Hope someone else will have more luck.
Regards!
1grouchy said:
Have a friend who works in phone service. They have an original ROM and he Flash it.
So for the future people who have same problem, here is explanation which I found on net:
"FAIL VERIFY IMAGE SIGNATURE":
The explanation is that the original recovery has a function to install zips with a particular firm, in this case should be Huawei.
However, almost all the ROMS officers who have taken both individual operators and Huawei for this phone have been format Update.app, installable using the "Firmware installer" phone and all had considerable weight.
But there have been some cases in which any operator like Orange Spain, used a zip supplied via OTA (like Update.app ) weighing approximately 90 MB (A minor update) whose function is to update the compilation B179 to B195, and what happens with this update zip format, is that the system makes a brief signature verification bootloader and the recovery and boot.img.
If the system detects that the Bootloader, the recovery or boot.img not have the original signature of Huawei or have been inserted through a hack or the like without having unlocked the bootloader officially, we will automatically display the following message after trying to install "Image Verify signature fail" in red letters.
The reason is surely and as I said before, we have unlocked the bootloader by an unofficial method or change some of those partitions by some hack before installing the zip, and this zip file contains the bootloader, recovery and boot.img because of their small weight, ie, is not able to replace him as the Update.app to return to the originals and leave us avoid this error signature verification.
A Update.app Bootloader completely regenerates us, so they used to solve 90% of problems. In this case we have no salvation unless there is a compilation format've tried installing Update.app or higher, and all other Update.app will Fail in the installation.
In the case of Orange model no Update.app the B195 is no compilation or compilation superior format Update.app , so we must take the SAT to have it fixed, and of course, do as we do not know what happened if we submit to third grade.
Solution is to find adequate ROM and flash with it. Mine was as I mention V100R001C00B195 and on net I can't find that one, so phone service was my destiny. Hope someone else will have more luck.
Regards!
Click to expand...
Click to collapse
If its not too late, have a look at this:
https://docs.google.com/file/d/0B1th-jpHK5tXeGt4WWJNS0R1d0k/edit
Its for the Y300 but:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its worth a shot.
reply
1grouchy said:
I manage somehow (friend bought at same time) to find out potential ROM version, B195.
Googled for it, but no success by now.
To be specific: V100R001C00B195
Does someone have a link maybe?
Click to expand...
Click to collapse
did you find any solution for that
did you already solve it ?
I have the same problem, I only can go on the pink screen.
I'm a big noob and I don't speek very good english; can you help me?
How to flash it ? my phone doesn't boots even to recovery mode !
Hi I have googled for find the way to flash wbrambley y300 image but I didn't find the way . also , my phone is huawei ascend g510 and it was stock-factory rom and it was rooted with busybox
- sorry , I don't have perrmission to upload file or insert photo or even a link!
RGH_PRIME said:
Hi I have googled for find the way to flash wbrambley y300 image but I didn't find the way . also , my phone is huawei ascend g510 and it was stock-factory rom and it was rooted with busybox
- sorry , I don't have perrmission to upload file or insert photo or even a link!
Click to expand...
Click to collapse
You need to put the UPDATE.APP in a folder named "dload" in the sdcard and push vol - and + at the same time then power until it shows updating
nagalun said:
You need to put the UPDATE.APP in a folder named "dload" in the sdcard and push vol - and + at the same time then power until it shows updating
Click to expand...
Click to collapse
I know and I have done the same steps with pink screen on my older phones
but the problem is yhe usb driver . I tried to install kitkat custom rom from huaweiNews.com to repair it and I installed all the drivers for Huawei g510-0200 I found there and in windows control panel I have just found this and I couldn't transfer the files to flash it !
and also , this problem (image verify failed) caused by installing wrong version of CWM (sumsung's instead)
SORRY IF I SHOULDN'T ASK THIS QUESTION HERE .
RGH_PRIME said:
I know and I have done the same steps with pink screen on my older phones
but the problem is yhe usb driver . I tried to install kitkat custom rom from huaweiNews.com to repair it and I installed all the drivers for Huawei g510-0200 I found there and in windows control panel I have just found this and I couldn't transfer the files to flash it !
and also , this problem (image verify failed) caused by installing wrong version of CWM (sumsung's instead)
Click to expand...
Click to collapse
Um, just take out the sd card, put it in your PC with an adapter or something and copy the files there?
Help please
nagalun said:
Um, just take out the sd card, put it in your PC with an adapter or something and copy the files there?
Click to expand...
Click to collapse
Hi , sorry but my phone still doesn't works . I have tried several firmware updates and roms . but non of them worked , thanks from nagalun because of his wise answer, but still I have these problems :
1- it fails in any frimware update ( from huaweinews.com - huawei original frimware from company site - y300 frimwares , etc)
2- phone doesn't mounts in pink screen (I have found the question in the forum . so I'm following it and still no solution . if anyone knows the answer , search for the question and answer it there )
please help me
Hi,
as above, the same problem with my sons G510. He has a Huawei G510-0100 phone, with a 4.1.1 Android, Vodafone (European)version.
I'd try to flash TWRP to install a custom ROM, but the phone now shows only that the image/recovery signature is invalid. The phone doesn't starts, can't enter in fastboot or recovery mode, but I can acces the pink screen. Thats all, the phone is stucked there.
How can I repare this halfbricked device?
(PS.
From Huawei's webpage I downloaded the factory G510-0200 Kernel (3.4.0 version, .rar file).
My phone is G510-0100 version.)
Solved.
I had the same problem. I installed custom recovery and I woke up with error "Your boot/recovery image may have an incorect signature" bla, bla, bla.
How solved I? Simple.
You must reflash stock rom for your Huawei Ascend G510 (0100, 0200 or 0251). If not know your version? Don't wory. Download and flash everyone version until result is ok.
All you need find here http://huawei-g510.com/
Hey everybody, this is my first post here
som days ago i received a Z7 Max. I updated it to the lates Rom but didn't like it, so using TWRP i tried to get it back to the 1.64 version.
However, this bricked it. I can turn on the phone and it shows the "many pictures"-screen (the android 4.4 one) and then it shows the "updating apps" screen but then it powers off at the first app.
I can get into stock recovery but not into TWRP and somehow it doesn't show the backup I made.
I also tried to do something based on the italian unbrick tutorial but i didn't really figure out what to do.
Can anybody pleeease help me or do I have to use my old phone again?.....
You went back to Kitkat and hence probably it bricked it. The lollipop partition is merged. If you can get to recovery, you can reflash a new rom via adb. Or use the unbrick link here: http://forum.xda-developers.com/zte-z7/general/unbrick-nubia-z7-mini-t3006268
Hey!
first thank you very much for your help
However, I am facing a problem.
When I'm in the nubia tools programme and select my file and then select "Start all" it always shows "Download mprg8974.mbn fail"
what can I do about this?
maseca said:
Hey!
first thank you very much for your help
However, I am facing a problem.
When I'm in the nubia tools programme and select my file and then select "Start all" it always shows "Download mprg8974.mbn fail"
what can I do about this?
Click to expand...
Click to collapse
Try this step by step without any mistakes: http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
OR you can do this as well: http://www.needrom.com/download/nubian-emergency-tool-v1-0-6/
I had bricked my phone similarly and recovered it by the first approach
hey!
i did it!!
all i did was i used another one of those tool studio thingys (the one you find on yandex from the italian forum , the password for it is in the text document in the same folder)
then i selected the 2.13 ROM and clicked on start all and now it works!
However, I would still like to get back to 1.64
Do you think there's any way this might be possible?
Quote from androidiani (the italian forum):
Rom stock 1.64 da flashare su lollipop stock- http://pan.baidu.com/s/1Er4a6 + tread http://bbs.nubia.cn/thread-437501-1-2.html
I think this is a ROM that I can flash on all the Android 5 Lollipop Roms and still get back to 1.64, isn't it?
maseca said:
hey!
i did it!!
all i did was i used another one of those tool studio thingys (the one you find on yandex from the italian forum , the password for it is in the text document in the same folder)
then i selected the 2.13 ROM and clicked on start all and now it works!
However, I would still like to get back to 1.64
Do you think there's any way this might be possible?
Quote from androidiani (the italian forum):
Rom stock 1.64 da flashare su lollipop stock- http://pan.baidu.com/s/1Er4a6 + tread http://bbs.nubia.cn/thread-437501-1-2.html
I think this is a ROM that I can flash on all the Android 5 Lollipop Roms and still get back to 1.64, isn't it?
Click to expand...
Click to collapse
I think you can just flash it from TWRP