As title.pls. help.
yes.
tailangon2 said:
As title.pls. help.
Click to expand...
Click to collapse
Download boot pacthed from her *****http://yadi.sk/d/ZcZUWbkTirEO****. After download flashed it using flashtool. For root use UNLOCKROOT download from unlockroot.com
problem solved.tq.
i still unable to root the phone. and still cannot get the boot file patched.
how you do it?
could you share here step by step?
imanhunter said:
i still unable to root the phone. and still cannot get the boot file patched.
how you do it?
could you share here step by step?
Click to expand...
Click to collapse
Flash tool tutorial
http://colonelzap.blogspot.co.uk/search?q=n9770
fadhil3536 said:
Download boot pacthed from her *****[]//yadi.sk/d/ZcZUWbkTirEO****[l]. After download flashed it using flashtool. For root use UNLOCKROOT download from unlockroot.com
Click to expand...
Click to collapse
Help. downloaded the boot patch file..It is an img file. Flashtool only recognizes FTF file. Help newbie here.
afwong said:
Help. downloaded the boot patch file..It is an img file. Flashtool only recognizes FTF file. Help newbie here.
Click to expand...
Click to collapse
Managed to get it rooted with both SuperOneClick and UNLOCKROOT. Well, at least these 2 apps reported that the phone is successfully ROOTED. However, when check with RootChecker and Root Checker Basic from Google Play, both apps said the phone not rooted.
So which is which? Superuser is in the phone and Terminal Emulator accepted the "SU" command...
My N8000+ has JB 4.1
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
Appreciate if you could do a ROM dump and share
mdashraf said:
Appreciate if you could do a ROM dump and share
Click to expand...
Click to collapse
If you can tell me how to dumb ...
I need info about rooting jb, anyone can help?
plz share
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
plz share the JB 4.1 rom ... :angel:
want to update my star n8000+
N8000+ with JB 4.1
texwiller said:
Hi,
I've just received Star N8000+ , and it seems it has JB 4.1 installed in it.
How can I root the device ?
Thks
Click to expand...
Click to collapse
Hi Textwiller,
Did you managed to root your N8000+ JB 4.1? Just curious.
I managed to root my N8000+ JB 4.0 set but not the set with JB 4.1.....
Have a very tough time to get the Star N8000 4.1.1 rootted
Can anyone help, please?
I have tried everything, from OneClickRoot, UnlockRoot, Root with Restore (V25) - and they all fail.
It seems like the filesystems cannot get remounted - even after busybox has been copied to the /data/.... directory.
Any ideas?
I want this rooted and install a "better recovery" - The one that is currently on the phone is in Chinese....
My current ROM is: e1908_v77_jbl1_9p017_6628 build date: 20121220
Thanks
bert269 said:
Can anyone help, please?
I have tried everything, from OneClickRoot, UnlockRoot, Root with Restore (V25) - and they all fail.
It seems like the filesystems cannot get remounted - even after busybox has been copied to the /data/.... directory.
Any ideas?
I want this rooted and install a "better recovery" - The one that is currently on the phone is in Chinese....
My current ROM is: e1908_v77_jbl1_9p017_6628 build date: 20121220
Thanks
Click to expand...
Click to collapse
Try this, http://forum.xda-developers.com/showpost.php?p=31126124&postcount=107
Mine is still on 4.0.1. I tried it on my second set on 4.1.1. It seems to be rooted. but some apps couldn't run reported it requires root....so.puzzled!
I also need to root my N8000+, i tried rooting it before but my ignorance of these chinese phones ended me up a few days of getting things back to normal, i do believe i need to flash patched boot file, then use rooting tool. correct? I have 4.1.1 please let me know if someone can successfully root this phone. also, what do you guys use for a front camera driver? thanks
i also have been looking to root the star n8000 mdk 6577 rom build i beleave is e1908_v77_jbl1_9p017_6628 i have been serching for a few moths now and nothing i cant get nowhere i cant read german nor chinse can we get some help with this phone please someone somewhere
So I guess we're not getting any help on this I have been surching hi and low and found nothing there so much for the mtk 6575 but nothing for the 77 so I'm not sure what's up with that I know some of the root programs I have tried says that it won't mout as read write so I don't know its kinda agervating but when u buy a phone u get what u pay for I mean it is a great phone fast but crappy reception I just wanna see if a u.s ROM would help the reception and speed if I new how to make a root program it do it or if someone made one it test it same with the Roms I have two phones Samsung s2 and the star note n8000+
Sent from my SGH-I777 using xda app-developers app
Use superone click
Finally got it rooted - here's how.
Hi all, my first post on xda-developers
I was really annoyed by the fact that no procedure seemed to work on my Star N8000+ (JB 4.1.1) e1908_v77_jbl1_9p017_6628 ORIGINAL STOCK ROM. I tried everything, from SuperOneClick to chinese rooting software... Nothing seemed to work. And since I have an untouched stock rom, and I had no wish to reflash the phone, I was left in the dark.
But, after lots of searching, experimenting and tons of trial-and-error with trying to understand scatter files and partitioning stuff, I finally managed to root my device with no need to use adb or to reflash the phone.
I'm posting a step-by-step guide for complete noobs like me. So here's the method I used (hope it works for all of you who aren't getting any luck with other methods, just like I was):
Download this file N8000+e1908_v77_jbl1_9p017_6628-Root.zip and copy it to your phone's sdcard;
Enter the phone's system recovery menu:
Turn phone OFF;
Hold Volume + key and turn phone ON. Keep holding Volume + until the below robot picture shows on your device. When it appears you can release the Volume + key;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Press the menu touch key (on the left of the phone's home button). A list of options will appear.
Using the Volume + or - key, highlight the "apply update from sdcard" option and press the phone's home button;
Using the Volume + or - key, find and highlight the N8000+e1908_v77_jbl1_9p017_6628-Root.zip file you've already saved on your sdcard (step 1). Once highlighted, press the phone's home button. Update will start;
When the update finishes, reboot your phone by using the Volume + or - key to select the "reboot system now" option and then press the phone's home button. Phone will reboot normally.
After all this, you should have root access to your phone
Files included on zip:
su v. 1.27
SuperSU v. 1.30
BusyBox v. 1.20.2
As always people mention when posting such procedures (and I think they are right), do it at your own risk. Although I feel and think that the above method is pretty safe and harmless, I will take no responsibility for any damages your phone may suffer. If you feel insecure about anything, just browse the sources on the zip package to check that the contents do not intend to harm your phone. I can assure you that I did all this just to try to help everybody who's out there, lost with rooting this wonderful device.
The above procedure worked flawlessly on my Star N8000+ (JB 4.1.1) e1908_v77_jbl1_9p017_6628 ORIGINAL STOCK ROM. If your phone version is different, it may or may not work. I think no harm could be done by trying (I guess the worst thing that could happen was the update to be refused to be applied due to certification incompatibility or wrong scatter/partition info). Once again, do it at your own risk.
Bonus: un-Root.
If you managed to successfully root your device using the above procedure, then you can undo it (unroot) by following the same above steps again, but instead of using the original zip file posted on step 1 use this one: N8000+e1908_v77_jbl1_9p017_6628-Root-UNINSTALL.zip
Related
Hi,
Is there someone who can help me with rooting this phone?
I tried every single method I could find but none of them worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have found a way to root the softbank p01d wich is in some aspects a similar phone. see link: http://d.hatena.ne.jp/naba_san/20120729/#1343534208
If there would be someone who can help, that would be really great!
And it would help other Panasonic eluga users too because there are already some topics asking for rooting.
Thanks
I was thinking: if I could make a custom recovery from clockworkmod custom recovery builder and root it
from there.
would this work? and how can I extract recovery.img from a non-rooted phone?
I know I could just take it from a downloaded firmware but as far as I know there are none on the internet.
thanks
wortel123 said:
I was thinking: if I could make a custom recovery from clockworkmod custom recovery builder and root it
from there.
would this work? and how can I extract recovery.img from a non-rooted phone?
I know I could just take it from a downloaded firmware but as far as I know there are none on the internet.
thanks
Click to expand...
Click to collapse
Edit: I just found a japanese software update : panasonic.jp/mobile/support/fota/p04d/download.html
I downloaded it and extracted the *.dat file. In there are some files: mtd5 (320bytes), mtd6 (10MB), mtd8 (161Bytes), mtd9 (8.51MB),
mtd10 (207kb) and mtd13 (10.2MB). They have no extension and I can't open them.
I know they are partition files so I renamed mtd8 to mtd8.img (my guess for the recovery partition) and submitted it to the clockworkmod builder site.
Let's see if this could bring rooting the eluga a little closer :laugh:
Update:
I have found the partitions of my phone :
Now i have to pull the original recovery from mmcblk0p11 (I think).
I tried it with: (in adb shell) /system/xbin/busybox dd if=/dev/block/mmcblk0p11 of=/mnt/sdcard/recovery_main.img
But it doesn't work because it needs root for that
But I can access busybox because I accendently have been able to copy it to /system/xbin
Don't know how but it works and I can't copy any files to /xbin or /bin anymore. Otherwise it would be easy to root.
Any more help would be really helpfull because i'm not an expert modder. I know how to work with commands an adb though.
I also have a dualboot with ubuntu and windows so maybe if there are some linux tools that could do the trick...
thanks
Keep it up !
It seems that noone cares about dL 1. I would appreciate to take away the camera shutter sound and boost volume in music a bit if rooted.
Please post any updates !
I'll do that But at the moment it seems i'm the only one trying to root this phone
Anyway: Time for the next update:
With the X-ray security app I discovered that my device is only vulnerable to the levitator exploit.
so i made a script using that exploit:
Unfortunatly this is also giving me an error :crying: and this is the only exploit that "could" work.
So, I need some more help!
Also tried the m9.r00t.apk app (wich uses the levitator exploit). Nothing happens.
grtz
I tried every single exploit, including these:
d.hatena.ne.jp/isakulion/20120619/1340101173
www22108u.sakura.ne.jp/files/p01d/
And here is a wiki www34.atwiki.jp/eluga/pages/18.html
If I could just dump the default recovery, I could make a Clockworkmod recovery. The panasonic can flash a update from file storage.
so if I could convert that clockworkmod recovery to mtd11 and zip it in a *.dat file (standard file format for software update) I could flash it to the phone. And try to root it from there.
But first I need to dump the original recovery.
I could use some help
Next update:
I updated the ADB drivers from Superoneclick with those from the panasonic P04D ADB drivers.
Now it doesn't hang on step 7 but it installs busybox. But then the app freezes
Screenshots:
I also tried this method:
forum.xda-developers.com/showthread.php?t=1477752
I think my phone doesn't have fastboot I tried all button combo's but the only thing I can get into is stock recovery.
And if I type: fastboot devices, no device shows up.
@ Mods: maybe it's better to move this thread to here: http://forum.xda-developers.com/forumdisplay.php?f=565
Thanks
Hi,
I'm new here, and i have this phone.
Have you a new idea for rooted this phone?
Thx
Did you root the dL1 Eluga?
Hello,
would you have any news on the procedure to Root the Eluga?
br
dbSman
did you root Eluga?
Hello,
where you able to root the Panasonic dL1 Eluga?
Android 4.0
Panasonic Germany twitter says me: Hello, we are expecting the end of October with an update. Maybe can arrange money for those who doing root for our device?
today i decided to buy this pretty phone for my lady .. because of the price and because as of today an ICS update is available ... but yes, a way to root it would be very nice :highfive:
it is possible to have root access with ics update? please check
ICS not working for me
Just tried running the Panasonic Eluga ICS update, and it tells me my phone is up to date (2.3.5), oh dear.....
uhm, cancel the ics update app and then re-install i hear that someone has this problem
news?
HI...i am the user of this model but the model name not same. so, the eluga ics update i cant to use, any one can send the elugaics update apk to me?:crying:
Eluga factory reset
Hi guys,
i got my eluga yesterday and ran straight into Problems. My SIM-Card i not recognized by my phone (But i know it works in other phones).
Then I tried to update the phone. At first the "smaller Gingerbread" update, which worked fine.
Still no change on SIM functionality.
After that I tried to get the ICS update running. Strange is, it downloads the package, but when going to instal it, suddenly it is not possible (research: Most others werent albe to download the package in the first place, their eluga said straight away it were up-to-date and stopped the update process).
I tried to do a factory reset with the function provided in settings. This resulted in a bootloop. It gets to the Lockscreen but i cant do anything and then it restarts over and over again. With holding the power button for a long time i am able to get it booting normal again. Just to see that nothing was done. The factory reset simply did nothing except for the bootloop and a cleared user space partition.
I wonder if theres a secret procedure to perform a reset on boot?
I also tried to gain root access but no luck so far...
With root i think the wipe could be done through adb right?
I have the suspicion that the "panasonic recovery" is damaged. This would in my noobish opinion explain why the factory reset goes wrong and the update stops when its intended to instal the rom (both actions update and reset are performed by a kind of recovery program right?).
Iam thankful for any Input
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Options:
1) Fresh Root - This is to do a clean root on your stock Asus JB rom or any other custom rom. Great for any users that lost root during an upgrade.
2) Fresh Start - This will give you a clean start by wiping your system partitions (backup your data) then flashing a stock JB image. After the package will do a clean root to the TF201 (Make sure you download the JB update for your region from the Asus site then extract and place the "blob" file in the same folder as this package and rename to "system.blob"
!!! This is for users with from any region with unlocked bootloaders only !!!
I made this because a few users have had trouble with root after the JB update from Asus. What I have made is an automated package that includes the root binaries and the the Team Win Recovery. From FASTBOOT this package will flash a custom recovery then root it. If a previous broken root from an update exist it will remove the old broken root and re-root it. Simple as that!
Additionally I have made another option in this package called "Fresh Start" and what this will do is wipe you tablet clean (backup your data) then flash a new image of JB. Once completed it will flash the custom recovery and root it before you even sign-in and set up the tablet. I recommend this as it will make the tablet nice, clean & speedy.
This assumes you have the correct drivers installed for your device, if not I recommend my Universal Naked Drivers Here
Credits:
Root Binaries - (ChainsDD) http://androidsu.com/superuser/
Recovery - (TeamRecovery) http://www.teamw.in/project/twrp2
**************************************************
This thread is not for help with unlocking your device or the naked drivers.
Hashes:
CRC32: 8C62EA76
MD5: 2E946D245F3778A5DEF2D07C00F8EF4B
SHA-1: 343661C655399CBE77E5D2946B59CFCCB77A1A69
Thanks
*ninja reserved*
I was so happy to see this and miss the "for unlocked bootloader only"
Anyway hope someone could come up for Locked Bootloader.
:EDIT_THANKS
Hey there,
after some issues i made the root!
great work!
thank you 1wayjonny!
:EDIT_SOLVED
think i made it. don´t know why, but after the 30 try the bat said finished, okay...
:EDIT_ORIGINAL
Hey everyone,
i got a problem, i flashed my tf201 with the new JB rom from the asus website, my device is unlocked. no root before. now i can´t root it...
everytime i start the "Fresh Root.bat" or the "Fresh Start.bat" i get multiple lines with
"FAILED (command write failed (Unknown error))"
can anybody help me?
greetz andy
howsed said:
Hey there,
after some issues i made the root!
great work!
thank you 1wayjonny!
Click to expand...
Click to collapse
Thanks for the feedback, being its automated you just have to get use the on screen instructions. I wiped and re-flashed, then rooted about 30x in a row with this package so I thought I would release to others to make their life easier.
If anyone has suggestions for any instructions that were not clear enough let me know and I can update for clarity.
howsed said:
:EDIT_THANKS
Hey there,
after some issues i made the root!
great work!
thank you 1wayjonny!
:EDIT_SOLVED
think i made it. don´t know why, but after the 30 try the bat said finished, okay...
:EDIT_ORIGINAL
Hey everyone,
i got a problem, i flashed my tf201 with the new JB rom from the asus website, my device is unlocked. no root before. now i can´t root it...
everytime i start the "Fresh Root.bat" or the "Fresh Start.bat" i get multiple lines with
"FAILED (command write failed (Unknown error))"
can anybody help me?
greetz andy
Click to expand...
Click to collapse
You have missed the step that mounts the /System from recovery. This has to be done manually then ADB can push ROOT. It said write failed so i assume this is where you got stuck.
1) Make sure you run as "Admin" just in case
2) When you boot into the custom recovery, you must select the "Mount" icon then then select system. After then you continue with the batch file and all should be good.
I can confirm that this worked w/ my TF201. Thanks a bunch!
I was unlocked and had root plus a "backup" according to Voodoo OTA RootKeeper. I manually installed the JB update via sdcard and lost root plus all signs of root. Being unlocked, I used your method in Win7 (parallels virtual machine on mac) running a shell as admin and everything worked without any hitches. I have root and have verified by Voodoo OTA, Root Explorer, and Titanium Backup.
A big thanks to you for this. I now have root again!
Robert
Ha ha ha ha! Root Restored!
Sir, You are a God! I lost root when I manually updated to JB using the Micro SD Card method. Followed your guide and am now rooted on JB! Sixaxis gaming Nirvana restored! Thank you!!!
---------- Post added at 08:25 PM ---------- Previous post was at 08:24 PM ----------
I can also confirm that the Asus Unlock tool worked for me.
I just tried this the total fresh start (blob method ). Got to last stage (mount system). Adb no device found . How can I rectify this .
Edit I updated sdk today .. tried naked drivers etc still cant get it to recognize it
Sent from my GT-I9300 using Tapatalk 2
adz63 said:
I just tried this the total fresh start (blob method ). Got to last stage (mount system). Adb no device found . How can I rectify this .
Edit I updated sdk today .. tried naked drivers etc still cant get it to recognize it
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
For anyone having issues with the ADB command I would manually try ADB before this package. This package assumes you have your drivers working in FASTBOOT & ADB. Or when you get the recovery flash and you have booted the recovery open a second prompt and try the "adb devices" command before this package pushes root.
I see that you have quite a few amount of post and would think you have some experience, since you are still having issues I would say that the drivers are dirty or something else weird is going on.
You have mentioned you get the recovery flash then booted, at this stage can you go to your device manager and take a screen shot of the Android device? You may have to repoint the device to the drivers but non the less a screen shot would help.
is there something like this but not for unlocked bootloader? I lost root on OTA but i didn't have it unlocked and don't want it to be fore now, I'm just using stock.
Works beautifully!
Thanks for root back!
I'm running CM10 unofficial right now but it's giving me some issues I'd rather not deal with right now...it already has the JB bootloader...can I still flash this to go back to stock[JB]?
I was wondering how to reinstall a recovery and to root again... Thanks!
Note: i just copy command lines from the bat file because i'm on linux.
Just wanted to say: it worked perfectly and painlessly on my already unlocked but otherwise stock prime!
Hi,
Coming from Completely Stock Prime with JB update. Unlocked BL via Asus Tool then used this method and everything went Perfect!! Thanks for your Effort.
I have to say that I'm glad to see you made this, worked great. Tried many other ways to root jb after I flashed androwook and lost custom recovery and root.
You're awesome!
Sent from my SGH-T999 using xda premium
Q
Do i lose erverthink or will i keep my current stock rom whitout installing erverthink.
Thanks works like a charm, unlocked my prime and installed the naked driver let the batch file do it work. back on rooted system with everything working
So I'm trying to do the Fresh start but can't for the life of me figure out how to move and rename the blob file unfortunately. I've got the extracted JB update file on my desktop but can't rename the blob file, right clicking it won't give me the option...
I'm supernoob with this device so can anyone please walk me through or figure out what I'm missing? Please...
Edit: well, looks like I've just gotten myself an unrecoverable bootloader...
more detailed instructions would be appreciated
I am a noob to this device and just unlocked the bootloader.
Can you post detailed step-by-step instructions for your method in the OP or PM. I am also wondering if TWRP version has been updated to 2.3.
Thank you very much.
EDIT: I am all set. Thanks.
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
delictis said:
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
Click to expand...
Click to collapse
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
rjspark89 said:
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
Click to expand...
Click to collapse
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
delictis said:
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
Click to expand...
Click to collapse
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
rjspark89 said:
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
Click to expand...
Click to collapse
TNX for your time and help
I'll try to flash that ROM and let you know.
I hope that works.
TNX
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
delictis said:
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
Click to expand...
Click to collapse
i think the problem.. is that.. see to sometimes.. custom recovery.. like cwm and twrp doesn't really work well when you try to flash stock ROMS.. so.. do you have your stock recovery? if so try going into download mode/pink screen mode ..replace cwm with your stock recovery.img.. then try updating again..
Huawei Ascend y210-100
Hello everyone,
I have a problem with my new Huawei Ascend Y210-100 Mobile. I wanted to root it but I go wrong. Because i have ran the ClockworkMod Recovery 5.0.2.8 For V8404-Y210-By Gocmobile.net.zip for Y210D. (S.H.I.T.) Grrrrrr.
My Y210 do stupid things The phisical buttons do functional full badly.
WI-FI and HotSpt don't work.
I have found the Factory firmware on Huawei support site but i am not able to upgrade the Factory ROM. Unpack and the install section stopped.
Here is the all found Firmwares and websites:
ORIGINAL Factory Firmware: h t t p://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
This was another ROOT method: w w w.symbianize.com/showthread.php?t=929464 (I don't suggest.)
And this was the BAD choice!!!!!: !!!ONLY Y210D!!!
h t t p ://ge.tt/8ZscJic/v/0?c
PLEASE PLEASE Huawey GURUs Help me.
Thanks a lot for every useful advice.
Tony (HUN)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST one more request.
Does anybody an original Huawei ascend 210-100 Factory firmware saved backup (without personal datas of course!!!) by ClockWorkRecovery PLEASE???
Could someone do a factory firmware backup and send to me Please Please PLEASEEEEE?
begi.76 @ gmail .com (put in formal email format)
did anyone reply you?
helping a friend to root/custom rom this phone, but not many good results.
no CM7, no ICS.... only found GB and GB themed like ICS
GB themed like ICS
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Factory FW (GB), unzip read instructions.
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
Is anyone currently doing a DEV for this unit?
Good Morning Sir,
No, nobody sent me flash file yet.
But I asked help just 2 days before.
Thanks for your help. I will try to do ASAP.
I will send feedback imediately as soon as work well.
PS: sorry 4 my bad English. I hope almost clear for everyone who read it.
Thanks,
Tony
---------- Post added at 10:06 AM ---------- Previous post was at 09:39 AM ----------
Hello Again,
I try to use the GB original firmware already.
I couldn't flashing the ROM. It was write in the first note.
As you can see in the pictures.
Something is go wrong with the CRW install (y210D )
Maybe the fastboot or something other because the 210D options available in my 210-100. I mean the HOME, BACK, MENU buttons working like in case 210D.
The SD card flashing not working. (cry, cry, cry)
I can find this informations in the sd_update.log:
"filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
"
Someone can unpack the app file? Maybe there can find the solution.
Thanks,
desperate Tony. (HUN)
Is your CWM working or not working, you no mention.
Flash CWM method 1
http://androidarea51.com/***-all-things-root-***-287/cwm-n-root-for-the-huawei-y210-build-b865/
Flash CWM method 2
http://myhvgagames.blogspot.sg/2013/08/3-in-1-stock-recovery-clockworkmode.html
Once you have CWM (or already using), flash this. (i am using for Y210-100)
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Below 2 for Y210D, have flash wifi can connect but no stable, Home/Menu/Back keys all jumble up also
Code:
VIETTEL-V8404-face-JB-By-Gocmobile.Net.zip
Code:
v8404-GMB-05-ModS4-ICS.zip
If you still problem, please download factory and try flash to stock.
Hi,
Yes the CWR working well. I can make backups and every function working as well.
I have tried some rooting method but no one worked.
The truth, I didn't want to install CWR just I wanted to ROOT my mobile.
Reason: Too less memory makes slow the phone, and write it "too less memory pls delete some program etc..."
But ones, after the y210D CWR install, I can root the phone with SuperOneClick 2.3.3. (yeeeeeeeeaaaaaaah)
ROOT, UNROOT, SHELL ROOT working well ( I said excellent.)
AFTER: Just I can't use HOME/BACK/MENU keys and WI-FI. (Cry)
Summary.
I'd like install the factory Firmware (I am not able to do this because it is freezing on 2nd step.) You can see in previous 2 pictures.
I'd like rooting the phone. Reason: intstall or moving programs to SD card.
I wouldn't like install the CWR because no need it for me.
Something BAD thing happend during the CWR install with 210D, because after the boot I have experience the functionality difference.
Okey I think maybe a bit difficult my English. If something no clear please write here and i will try to rephrase that.
Thanks.
Tony.
Hey! It would be a problem, I tried to ask one of the CM rom on Huawei Y200, and everything is done as it should, but the phone will go only to the boot LOGO .... Somebody help me!
Tapatalk 2-vel küldve az én Optimus 4X HD-ről
for
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
mandroid76 said:
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
Click to expand...
Click to collapse
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
bob4x4 said:
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
Click to expand...
Click to collapse
u should research more... original rom and instructions provided. ive done it before sometime back.
felix_fx2 said:
u should research more... original rom and instructions provided. ive done it before sometime back.
Click to expand...
Click to collapse
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
bob4x4 said:
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
Click to expand...
Click to collapse
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
felix_fx2 said:
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
Click to expand...
Click to collapse
thank you very much.
i've downloaded thes two..
HUAWEI_Y210_firmware（Y210-0100%2CAndroid 2.3%2CV100R001C00B856%2CNormal%2C05011DPY）
And
Ascend_Y210(Y210-0100_Android_2.3_V100R001C00B839_Normal_05011DPY)
think maybe something goes wrong in the rom custom that i've installed.
no news?
best regards.
Q&A for [ROOT] Root with Locked Bootloader for SGP621 using giefroot
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT] Root with Locked Bootloader for SGP621 using giefroot. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Deleted
I'm at (24).
I requested the link to get an unlock code at developer.sonymobile.com. It's now been over 24 hours and i haven't get an email yet. Tried ist with a differnet email adress too.
How long does it take usally?
WiFi isssue after flashing D6603 rom
Hi,
I liked the idea of flashing D6603 rom on my SGP621 and rooting it..
I like my tablet now even more..
But the WiFi is not working for me now, only LTE/3G..
Also the camera not working, but I don't care because I'm using my mobile phone for taking pictures..
Is there any way to make WiFi working with D6603 rom?
Thanks...
russse said:
I'm at (24).
I requested the link to get an unlock code at developer.sonymobile.com. It's now been over 24 hours and i haven't get an email yet. Tried ist with a differnet email adress too.
How long does it take usally?
Click to expand...
Click to collapse
Normaly it takes not more than a few minutes. You can resend it at any time by requesting it again on sonymobile. If it still does not work you may need to get in touch with developer support on their website.
---------- Post added at 03:38 PM ---------- Previous post was at 03:33 PM ----------
kamal3383 said:
Hi,
I liked the idea of flashing D6603 rom on my SGP621 and rooting it..
I like my tablet now even more..
But the WiFi is not working for me now, only LTE/3G..
Also the camera not working, but I don't care because I'm using my mobile phone for taking pictures..
Is there any way to make WiFi working with D6603 rom?
Thanks...
Click to expand...
Click to collapse
No, you cannot. As there are other drivers used. If you want root and WiFi you need to follow the tutorial to the end and in the process unlock your bootloader and return to the SGP621 stock rom.
Hi lowtraxx
Thanks a lot for your great work!
I have the SGP611 version and have successfully followed rurie's guide to root the unit. Now i'm installing the rooted stock, but I'm stuck at your step 30. In step 28 I booted into fastboot and used Flashtool to execute the Z3TC-stock-twrp.img by pressing the button "Select system to Flash" and selecting the img-file, see pic.
I have tried to reboot by pressing "Reboot into fastboot mode (via Fastboot) to press volume down on purple light. However, the light never goes purple. It is blue, then swishes to red for an instance/glimpse. I have tried to hold down "volume down" and to press it many times but nothing works. Can you explain step 30 to 32 in detail, e.g. by using the buttons on the Flashtool - Fastboot toolbox (see pic)?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I hope you did not flash the SGP621_23.0.1.A.0.167_CE.ftf onto your device but the one that is for the SGP611, because from your description it sounds like you are in a bootloop. I haven't used Flashtool to flash a kernel before, I am only using the command line. But my best guess would be that you need to click on Select Kernel to flash, select the Z3TC-stock-twrp.img and click on flash. Once that is done, you should reboot the device and wait until the Xperia logo shows up and the LED goes purple. If you now press volume down you get into recovery where you need to flash the RICDefeat.zip file you downloaded. If that does not work, download flashtool binary for windows, open a cmd prompt as Administrator, boot into fastboot mode and execute 'fastboot flash boot /path/to/the/Z3TC-stock-twrp.img' and then continue as outlined above.
lowtraxx said:
Hi,
I hope you did not flash the SGP621_23.0.1.A.0.167_CE.ftf onto your device but the one that is for the SGP611, because from your description it sounds like you are in a bootloop. I haven't used Flashtool to flash a kernel before, I am only using the command line. But my best guess would be that you need to click on Select Kernel to flash, select the Z3TC-stock-twrp.img and click on flash. Once that is done, you should reboot the device and wait until the Xperia logo shows up and the LED goes purple. If you now press volume down you get into recovery where you need to flash the RICDefeat.zip file you downloaded. If that does not work, download flashtool binary for windows, open a cmd prompt as Administrator, boot into fastboot mode and execute 'fastboot flash boot /path/to/the/Z3TC-stock-twrp.img' and then continue as outlined above.
Click to expand...
Click to collapse
Thanks for your reply. I have used the SGP611 firmware, so no problem.
I have flashed Z3TC-stock-twrp.img unto the unit using the button Select Kernal, but when I reboot the LED never goes purple - only blue and for a quick glimpe (~1-3 ms) red. If I boot the unit in normal mode (without fastboot mode or flash mode) it gets stuck at the Sony logo and cannot be shut down without pressing the small force-shut-down button next to the SD card. (It booted as SPG611 just fine before I flashed Z3TC-stock-twrp.img unto it - using the button Select Kernal.)
EDIT. Tried to download Z3TC-stock-twrp.img again and flash it using CMD in windows. Now I can access Recovery.
I'm progressing, but only slowly.
I'm at step 32 in the guide but every time I try to load/install RICDefeat it fails. Nothing happens when I try to issue 'adb sideload /path/to/RICDefeat.zip', so I have put the file on my external SD card. But when I press "install" - "external_sd" - "RICDefeat.zip" in the twrp Recovery it fails and an error comes: "Error executing updater binary in zip '/external_sd/RICDefeat.zip'".
How can I progress? Why do I have to install RICDefeat?
Without RICDefeat you are not able to mount the system partition writeable, so you have no real root. The error is odd though. Have you tried downloading the RICDefeat.zip again, maybe it was corrupted too (like the TWRP img)
lowtraxx said:
Without RICDefeat you are not able to mount the system partition writeable, so you have no real root. The error is odd though. Have you tried downloading the RICDefeat.zip again, maybe it was corrupted too (like the TWRP img)
Click to expand...
Click to collapse
Yes, I have tried downloading it again by clicking "View Raw". I have copied both to the SDcard, but both fails with same error.
Trying to use ADB Sideload and writing "adb devices" in Windows CMD from the folder C:\Users\USERNAME\AppData\Local\Android\sdk\platfo rm-tools just returns an empty list, and installing from SD fails with "Error executing updater binary in zip '/external_sd/RICDefeat.zip'".
Is it possible to go back some steps and try again - without bricking the device? E.g. to step 26? Is there an other place to down the advanced stock kernel?
centric dk said:
Yes, I have tried downloading it again by clicking "View Raw". I have copied both to the SDcard, but both fails with same error.
Trying to use ADB Sideload and writing "adb devices" in Windows CMD from the folder C:\Users\USERNAME\AppData\Local\Android\sdk\platfo rm-tools just returns an empty list, and installing from SD fails with "Error executing updater binary in zip '/external_sd/RICDefeat.zip'".
Is it possible to go back some steps and try again - without bricking the device? E.g. to step 26? Is there an other place to down the advanced stock kernel?
Click to expand...
Click to collapse
It worked! I now have an rooted Z3 tablet compact with stock rom and locked bootloader. :good:
I solved it by tring to go back to step 26 and try one more time (with the same files,and same method). This time I did get the same errors about LED in twrp, but everything worked just like it was suppose to and explained in this guide. The RICDefeat flash just took 5 seconds.
Thank you for helping me!
Last questions:
Will I be able to receive Other OTA updates, e.g. for Lollipop when Sony is ready?
Can I always go back to step 35 if I want a clean/new installation, or do I have to unlock the bootloader first, going back to step 24?
centric dk said:
It worked! I now have an rooted Z3 tablet compact with stock rom and locked bootloader. :good:
I solved it by tring to go back to step 26 and try one more time (with the same files,and same method). This time I did get the same errors about LED in twrp, but everything worked just like it was suppose to and explained in this guide. The RICDefeat flash just took 5 seconds.
Thank you for helping me!
Last questions:
Will I be able to receive Other OTA updates, e.g. for Lollipop when Sony is ready?
Can I always go back to step 35 if I want a clean/new installation, or do I have to unlock the bootloader first, going back to step 24?
Click to expand...
Click to collapse
Hi,
you will most likely be notified about OTA updates, but you should not take them, because they will not apply properly and most likely remove root again. Just wait for recovery flashable updates or build your own flashable update once the ftfs for the lollipop versions get available. If you want a clean installation without unlocking the bootloader again, just build a flashable zip of a clean ftf and flash that. If you want to send it in for repairs and the like, you can always flash a clean ftf with flashtool, but if you want to root it afterwards you need to unlock the bootloader again.
centric dk said:
It worked! I now have an rooted Z3 tablet compact with stock rom and locked bootloader. :good:
I solved it by tring to go back to step 26 and try one more time (with the same files,and same method). This time I did get the same errors about LED in twrp, but everything worked just like it was suppose to and explained in this guide. The RICDefeat flash just took 5 seconds.
Thank you for helping me!
Last questions:
Will I be able to receive Other OTA updates, e.g. for Lollipop when Sony is ready?
Can I always go back to step 35 if I want a clean/new installation, or do I have to unlock the bootloader first, going back to step 24?
Click to expand...
Click to collapse
I'm currently trying to flash RICDefeat from recovery and am getting the exact same error you reported. Do you know what exactly changed that allowed you to flash it successfully? Did you use the RAW version? Where did you put it, internal memory or SD?
Thanks!
Amplifiction said:
I'm currently trying to flash RICDefeat from recovery and am getting the exact same error you reported. Do you know what exactly changed that allowed you to flash it successfully? Did you use the RAW version? Where did you put it, internal memory or SD?
Thanks!
Click to expand...
Click to collapse
I did not change anything. The second time just went a lot faster as I had tried it before. I put RICdefeat on the SD card.
I also have a Z3 Compact (phone). That it a lot simpler to root and RICdefeat is not needed in that guide. Maybe you can get inspiration there?
centric dk said:
I did not change anything. The second time just went a lot faster as I had tried it before. I put RICdefeat on the SD card.
I also have a Z3 Compact (phone). That it a lot simpler to root and RICdefeat is not needed in that guide. Maybe you can get inspiration there?
Click to expand...
Click to collapse
I actually have been following a guide in the Z3C forums but ended up with partial root. RICD should be able to solve it, but gave me an arror. When I read you've been having similar problems, I thought I'd give it a go. Thanks anyway.
Amplifiction said:
I actually have been following a guide in the Z3C forums but ended up with partial root. RICD should be able to solve it, but gave me an arror. When I read you've been having similar problems, I thought I'd give it a go. Thanks anyway.
Click to expand...
Click to collapse
I followed this guide for Z3C (phone): http://forum.xda-developers.com/showpost.php?p=59627168&postcount=120
centric dk said:
I followed this guide for Z3C (phone): http://forum.xda-developers.com/showpost.php?p=59627168&postcount=120
Click to expand...
Click to collapse
Try this one;
http://forum.xda-developers.com/z3-...to-rooted-lollipop-locked-bootloader-t3083980
All works fine.
Hey,
today I got my Xperia X3CT and I followed this Guide to Root my Tablet: http://forum.xda-developers.com/z3-t...gp621-t3013534
(I rooted my LG G2 so I thought I should be able to Root my Tablet without any problems )
At Point 6 I started my Tablet, but somehow it is Stuck in a Bootloop. I am sure I did everything the way the Guide told me to, but somehow my Tablet is still in a Bootloop. How do I get out of it? I can turn the Device of by pressing the Power Button und the Volume Up Button.
Can someone please help?
EDIT: Got out of the Bootloop by flashing back to SGP621_23.0.1.A.0.167_CE.ftf. That was quite a shocker
I think the Problem was that I was at 23.1.A.0.690. Now that I am at 23.0.1.A.0.167 it should make any problems? Or could there be another Problem? Would be thankful for help
Emildeon said:
I think the Problem was that I was at 23.1.A.0.690.
Click to expand...
Click to collapse
That was the problem , you must follow the manual from kitkat (23.0.1.A.0.167) . I advise to use http://forum.xda-developers.com/z3-...to-rooted-lollipop-locked-bootloader-t3083980 ( No need to open the bootloader ). I made a guide in Spanish
Hi everyone, I have a Blackview bv6000 device with android 6.0, firmware BV6000_blackview_V01_20160608
I have already unlocked the bootloader and i would like to unlock the root but i don't know how do it. Can someone help me?
Another thing, i have unlock the System UI Tuner but it doesn't appere in my settings menu, any idea to solve it?
Regards, Marco
traneXD said:
Hi everyone, I have a Blackview bv6000 device with android 6.0, firmware BV6000_blackview_V01_20160608
I have already unlocked the bootloader and i would like to unlock the root but i don't know how do it. Can someone help me?
Another thing, i have unlock the System UI Tuner but it doesn't appere in my settings menu, any idea to solve it?
Regards, Marco
Click to expand...
Click to collapse
Hi Marco,
could you please describe how to unlock the bootloader?
Thanks,
Chris
HI, for the bootloader just go in settings, unlock developer options and u can find there unlock OEM
I Have BV6000 now too, an no way found to root it.
Pappmann said:
I Have BV6000 now too, an no way found to root it.
Click to expand...
Click to collapse
Hi mate the System UI Tuner appere on your device?
Ring R00T?
Does King R00T work? This would be my 1st choice.
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Avast! detects it as a PUP (POTENTIALLY UNWANTED PROGRAM) due to the exploit. And yes, avast!'s detection is correct, it is "Potentially" unwanted, you have the choice to have it ignored.
Also, I have the desktop version of King R00T installed into a netbook, so I don't have all the detection's going nutz, I do my R00T and jail brakes from the netbook.
Also, does the phone have an LED notification for calls/text/mail/charging on the front?
UnableToResetOldProfile said:
Does King R00T work? This would be my 1st choice.
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
Avast! detects it as a PUP (POTENTIALLY UNWANTED PROGRAM) due to the exploit. And yes, avast!'s detection is correct, it is "Potentially" unwanted, you have the choice to have it ignored.
Also, I have the desktop version of King R00T installed into a netbook, so I don't have all the detection's going nutz, I do my R00T and jail brakes from the netbook.
Also, does the phone have an LED notification for calls/text/mail/charging on the front?
Click to expand...
Click to collapse
The Phone have not led notification, i haven't tra King root yet because nobody have used it on this device
R00T, The '00' is the base directery in R'00'T
traneXD said:
The Phone have not led notification, i haven't tra King root yet because nobody have used it on this device
Click to expand...
Click to collapse
King R00T is for Chinese phones, by Chinese people, who live in China .... :silly:
Use the desktop version as it has better exploit ability's. It works on most Chinese phones that I R00T, the last Chinese phone I did (THL T7) it was flawless.
KR has a page here at XDA: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
PLEASE REPORT BACK WITH YOUR SUCCESS
.
.
.
.
.
.
.
UnableToResetOldProfile said:
King R00T is for Chinese phones, by Chinese people, who live in China .... :silly:
Use the desktop version as it has better exploit ability's. It works on most Chinese phones that I R00T, the last Chinese phone I did (THL T7) it was flawless.
KR has a page here at XDA: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461
PLEASE REPORT BACK WITH YOUR SUCCESS .
Click to expand...
Click to collapse
I tried to root my BV6000 with KR, but it failed!
dr.dog1987 said:
I tried to root my BV6000 with KR, but it failed!
Click to expand...
Click to collapse
I guess it's early, this device was released in may :/
i tried kingroot too, does not work yet.
its quite simple, just flash TWRP from Needrom and then su.
worked for me
yankeeboy said:
its quite simple, just flash TWRP from Needrom and then su.
worked for me
Click to expand...
Click to collapse
yankeeboy,
could you please provide more details?
thanks in advance!
SuperSU 6.0 R00T
"Chainfire has released SuperSU root for Android 6.0 Marshmallow without modifying system partitions"
Give this a try: http://www.supersuroot.com/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:fingers-crossed:
chris-ba said:
yankeeboy,
could you please provide more details?
thanks in advance!
Click to expand...
Click to collapse
1. copy UPDATE-SuperSU-v2.65-20151226141550.zip (attached) to BV6000, remember where you place it
2. flash TWRP recovery.img(decompress from zip attached) with sp flash tool v5.1604 or newer, use scatter file attached, check only recovery for flashing
3. boot into TWRP recovery
3. flash UPDATE-SuperSU-v2.65-20151226141550.zip within TWRP recovery
4. wipe dalvik/cache
5. reboot
done
i'm not responsible for any bricked phone, use this all at your own risk!!!
yankeeboy said:
1. copy UPDATE-SuperSU-v2.65-20151226141550.zip (attached) to BV6000, remember where you place it
2. flash TWRP recovery.img(decompress from zip attached) with sp flash tool v5.1604 or newer, use scatter file attached, check only recovery for flashing
3. boot into TWRP recovery
3. flash UPDATE-SuperSU-v2.65-20151226141550.zip within TWRP recovery
4. wipe dalvik/cache
5. reboot
done
i'm not responsible for any bricked phone, use this all at your own risk!!!
Click to expand...
Click to collapse
many thanks for your remarks. I'm going to test it as soon as my phone arrives.
on needrom I read that some people have some problems. the touchscreen is not responding or they lost their IMEI.
were you faced with any problems quite like this?
chris-ba said:
many thanks for your remarks. I'm going to test it as soon as my phone arrives.
on needrom I read that some people have some problems. the touchscreen is not responding or they lost their IMEI.
were you faced with any problems quite like this?
Click to expand...
Click to collapse
no problems for me so far
Which v of TWRP?
yankeeboy said:
1. copy UPDATE-SuperSU-v2.65-20151226141550.zip (attached) to BV6000, remember where you place it
2. flash TWRP recovery.img(decompress from zip attached) with sp flash tool v5.1604 or newer, use scatter file attached, check only recovery for flashing
3. boot into TWRP recovery
3?. flash UPDATE-SuperSU-v2.65-20151226141550.zip within TWRP recovery
4. wipe dalvik/cache
5. reboot
done
I'm not responsible for any bricked phone, use this all at your own risk!!!
Click to expand...
Click to collapse
Sorry, for the post, I figured out my own question ... :silly:
Hi, does the bootloader need to be unlocked before flashing the TWRP and if so why is there no mention of this? Thanks!
Gyro installed incorrectly.
There is a possibility that a large production run is defective.
This defect may be in all the phones produced.
The gyro was installed incorrectly and the pitch and roll are swapped.
Check your phone and report this problem to Blackview.
https://youtu.be/LARkSzgvPjU
http://bbs.blackview.hk/viewtopic.php?f=142&t=42024