Hello. I tried to use Repartition in Rom Manager and my phone stuck in Vibrant Screen. So I used Odin and check Repartition there nothing was happening for 10 minutes, I decided to unplug and just reload stock rom. I did that without any problems. Phone started to boot up but after Galaxy log it stuck in black screen. I am hopping that I didn't bricked my phone. Can anybody help me solve this problem?
What files are you using in Odin? If trying to flash 2.2 then try Eugenes jk2 for Odin if 2.1 jfd both in the bible/directory. Make sure you're using the 512 pit file also when repartitioning.
Sent from my SGH-T959 using XDA App
I tried Eugene Froyo that Doesn't Brick and official JFD and it getting stuck in cache for a while then screen goes black
Are you also using the 512 pit file? Go here http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/ and follow instructions. As long as you are getting something from the phone then you should be ok I think you are just missing a step. And so you know I found this through the Vibrant directory and it has all the files you need including the Samsung drivers for your PC if you don't have them installed. Good Luck
Installed the DoW kernel over Bionix-v and wound up in a boot loop, unable to get into recovery, but I was able to get into download mode. Tried using ODIN to flash back to stock, but it won't boot past the 1st Vibrant splash screen.
The ONLY rom I've been able to boot is Eugene's JK2+2e Froyo ROM, but it's not recognizing both the internal and external storage (shows unavailable). I'm assuming this is due to ODINing with voodoo enabled, so I tried flashing one of SuperCurio's voodoo kernels on top, but that seemed to have no effect.
I've tried using Eugene's Froyo that doesnt brick and then downgrading to stock JFD, but it still refuses to boot, same as if I negated the Froyo step. I'm fairly lost as to what my next step should be besides randomly changing settings, but I dont want to get to a state where I can't enter download mode.
ANY help anyone can provide would be amazing and greatly appreciated, and I can of course provide any additional information that would be helpful.
Odin needs time. Odin is your solution.
Sent from my SGH-T959 using XDA App
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
torturedsoul802 said:
Thanks for the response, but could you be more specific? I'm aware that ODIN is the solution, because I'm unable to flash anything in recovery.
Click to expand...
Click to collapse
Sure. If it was me id download an older odin version. Just try it. Id also go back to stock.
Remember to back up a program to root.
I still use odin 1.3 myself. Works every single time.
Let me know.
Sent from my SGH-T959 using XDA App
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
torturedsoul802 said:
Using Odin 1.7 now, I'll try 1.3 and report back on that. The problem is, every time I attempt to revert back to stock (JFD or JI6), the phone refuses to boot, shows Vibrant splashscreen for ~1.5 sec and then shuts off. No boot animations.
Click to expand...
Click to collapse
Keep trying. It will work eventually for no reason.
Sent from my SGH-T959 using XDA App
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Leave it alone for at least 5 to 10 min on splash screen. Sometimes that takes a while.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
15 max
Sent from my SGH-T959 using XDA App
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
torturedsoul802 said:
Would you recommend flashing Eugene's Froyo that does not brick first and then flashing stock on top? Or straight to flash? And should "re-partition" be checked at any point, since the ext4 system needs to be rebuilt to RFS.
Click to expand...
Click to collapse
No to repartition on my end. But u may want to ask about the ext4 going back to rfs. Ive always done it in cwm honestly.
Someone else with more expirience will have to answer that.
But I have never and read it doesnt need to be done.
Sent from my SGH-T959 using XDA App
Tried, still wont turn on on stock, just vibrant screen.
torturedsoul802 said:
Tried, still wont turn on on stock, just vibrant screen.
Click to expand...
Click to collapse
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Its not bricked. Keep trying.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1. If your phone boots at all it's in my experience 100% recoverable. I own a RIFF box as well so if you brick it dead then I can still fix it... . I'll be getting a video up on ODIN usage for Vibrant/i9000 owners tomorrow. Check out my Boot Logo video on my website for a little bit of ODIN usage to give you an idea. You just need to open ODIN. The put the phone in download mode and plug in via USB. Then select your PIT and PDA file and click start. Then you can reflash stock firmware. PM me as I offer this as a service as well.
Thanks for the reply. Usage of ODIN is not my problem, the problem is that flashing to JFD (whether I use Eugene's Froyo 1st or not) results in a failed boot. The phone shows the 1st Vibrant splash screen for ~2 sec and then shuts off. No process I have tried results in a successful stock boot.
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
torturedsoul802 said:
Thinking about trying both of these:
http://forum.xda-developers.com/showthread.php?t=823300
http://forum.xda-developers.com/showthread.php?t=940671
HOPEFULLY, one of these will let me get into CWM or access the filesystem in order to disable Voodoo.
Once again, if anyone knows of a way to revert EXT4 -> RFS through ADB or download mode, please let me know!
Click to expand...
Click to collapse
Hey, thank you so much for posting this up. These are great finds. I'd be more inclined though, to just call Tmobile and get another phone. I'm really tired of messing with the phone. I don't have time to be messing with this anymore.
The fact that I can get into download mode may be good news, but it does nothing for me right now. With what we know about bricking and unbricking phones, I've thrown every trick I know at it already. I hope you get it fixed, but I"m not messing with it anymore.
drewdude007 said:
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death! I called T-Mobile yesterday and told them I have know idea why but my phone won't turn on, blah, blah, blah. So they are going to replace it under warranty and it will be here in a few days.
Click to expand...
Click to collapse
Yeah man, me too. I'm getting this thing exchanged. It's a paperweight right now. My phone is doing exactly the same thing.
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Size matters.
Hey, I haven't posted in here before, I've been a member for a while, just never had anything to contribute. So I got the whole soft brick problem. I spent countless hours trying to get into download mode. The size of the usb cable matters, I was using an LG Optimus cord, and my buddy tried his blackberry cord which had much more gerth, and BAM download mode everytime no problem. Maybe this might help some of you out there.
Also I would like to say, thank you for everyones hard work. I had to roll back to stock roms, and just got the Froyo.UVKA7 to work. I love it, it's quick, it's got color in the settings menu. I wanted to cry... Everyone that has ever had anything to do with the developement to make Android better. THANK YOU!
Absolutely,
I am having problems with the phone starting up and loading what I flashed.
I flashed JI5 Ji6, and Eugene's non bricking Froyo Rom
These 3 are the only ones I was able to find that is ODIN flashable
Why you ask?
I cannot get into Recovery, but I can get into Download mode. I can't get into any recovery at all. NOTHING. This is why ODIN seems to be my only option.
But regardless of any ROM i flash, my phone shuts off right after the Vibrant screen. No splash screen, no loading, no booting. .Nothing. It just shuts off.
I can't charge it either.
i get a Charging bootloop. HOurglass - battery shows up for a bit, then restarts over and over.
So in other words. it's ****ed.
Hope that explains it sufficiently. if you have any more questions or suggestions, Im open man, Im open.
Help me
connexion2005 said:
Can you recap one more time? You are only having problems flashing a custom ROM? You said ODIN is not the problem so I'm taking it you could flash back to stock if you wanted to?
Click to expand...
Click to collapse
First off, I want to apologize if I ramble on. I am trying to be as thorough as possible.
Also, I am relatively knowledgeable about rooting and whatnot, so hopefully I will understand whatever help you guys can give me.
Here's my problem:
I originally had Bionix-V 1.3.1 (which is a 2.2 rom), and I wanted to upgrade to a Gingerbread rom. So I downloaded "Trigger Redux" (addictivetips.com/mobile/install-android-2-3-5-based-custom-rom-on-t-mobile-samsung-vibrant/) and followed the instructions completely. The instructions told me to do a nandroid (which I did and it went perfect), then factory wipe the phone and wipe the dalvik cache (which I did), and then run the Trigger Redux zip from the sd card (which I did). Everything worked fine, but when I started messing around with the new rom, I didn't like it as much as my old rom, so I decided to reboot the phone into recovery to perform the nandroid restore. When my phone rebooted, I noticed the clockwork recovery looked different from what had before (it was orange, when the old one I had was red). Anyways, I tried to do the nandroid restore, it gave me an error about not being able to perform the nandroid for whatever reason (I honestly don't remember what it said now). So did a factory wipe again, thinking that may allow the nandroid restore to perform properly, and I still got the same error. So I restarted my phone, and now I'm stuck on the Vibrant logo screen. I can get into download mode (by plugging in usb/pressing vol up and down/inserting battery), but not sure how to get my phone into recovery mode again. I know I can probably use Odin, but I'm not real familiar with that program and I wouldn't know where to start.
What's the first thing I should do? I know my phone is fixable, I just don't know where to start Any help is very greatly appreciated. You guys are awesome!
Odin to stock is simple but risky...if it fails due to any reason u will have a completely bricked phone....there's a guide on how to do that process BC u will need to download two files...one is .pit and other is .Tar file......here's a video link..http://www.youtube.com/watch?v=VIBeLG4frjM...and here is a link to download required files....http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/....good luck
Sent from my MB860 using XDA App
deziguy420 said:
Odin to stock is simple but risky...if it fails due to any reason u will have a completely bricked phone....there's a guide on how to do that process BC u will need to download two files...one is .pit and other is .Tar file......here's a video link..http://www.youtube.com/watch?v=VIBeLG4frjM...and here is a link to download required files....http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/....good luck
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Yes you need odin but you won't be bricked if it fails for any reason. I have odin fail a few times and you start it back up and try again. The only way you can brick with odin is during a bootloader flash
Sent from my GT-I9000 using XDA App
bfranklin1986 said:
Yes you need odin but you won't be bricked if it fails for any reason. I have odin fail a few times and you start it back up and try again. The only way you can brick with odin is during a bootloader flash
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
if it fails in the very beginning then it's ok but if it fails in the middle then definitely it will be bricked... if you record yourself pulling off usb in the middle of the process then send me that link...i would love to see the result...
Samsung Android T-Mobile SGH-T959 Vibrant Firmware
fallow guy and use from this roms
http://gsm-beyond.blogspot.com/2011/07/samsung-android-t-mobile-sgh-t959.html
bfranklin1986 said:
Yes you need odin but you won't be bricked if it fails for any reason. I have odin fail a few times and you start it back up and try again. The only way you can brick with odin is during a bootloader flash
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
i hard bricked going to stock with odin, it froze at the very end so i unplugged to try again and it went off and wouldnt do anything after that
its froze afew times at the beginning aswell but just goes to the phone ! pc screen when unplugged
deziguy420 said:
if it fails in the very beginning then it's ok but if it fails in the middle then definitely it will be bricked... if you record yourself pulling off usb in the middle of the process then send me that link...i would love to see the result...
Click to expand...
Click to collapse
Why would you pull the cord? Never check auto reboot and if it fails just close odin and restart it. If you pull the cord and reboot with a half flashed phone then yes that would probably brick you
Sent from my GT-I9000 using XDA App
bfranklin1986 said:
Why would you pull the cord? Never check auto reboot and if it fails just close odin and restart it. If you pull the cord and reboot with a half flashed phone then yes that would probably brick you
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
that's exactly my point...according to other person he says odin to stock won't brick a phone...so i was just telling him to pull the plug out while it's running the procedure...and of course that will brick his phone and a prove that yes odin to stock can brick your phone... of course pulling a cable would be stupid...but what if your computer restarts all of the sudden or u lose electricity...stuff like that...can cause a dam hard brick....
Ok so this is where I'm at.
I decided after having hellybean for a while I would go back to something simple. Bionix v4. I flashed it in odin with the 512 pit file and the bionix tar file selecting repartition. after 5 minutes it was at the recovery screen as it should be according to the instructions. I wiped/factory reseted. and rebooted as per the instructions and then it said it couldn't repartition. Ok. redo previous steps. nope still the same thing. ok go get the uvjfd file and revert it back to stock. ok. and it says it can't wipe data. ok try again. nope same thing. goes to black after stock boot. got it into recovery and MBR Checksum Error, Movinand Checksum Confirmation Fail. put on the overstock kernel. and stuck at overstock banner. ok restart. same thing again. try to get to recovery. yep. wipe user data. ok lets do it again. and same thing. ok lets wipe it completely. odined the whole thing without the pda checked. and bricked. no problem lets get it into download mode. got it!! ok now revert back to stock. and same problem. ok lets get a froyo bootloader. got it, great. odin it in. yep. revert back to stock. worked and still same problem. reading, reading, reading, reading, reading, ok lets odin back to stock without repartition checked and hope magic happens. nope. got into recovery again. deleted all user data and cache data. reboot and black after boot order again. ok one more time lets try Biovix tar file. and now its stuck and the bali logo again. again again. I think I tried it again 5 times throughout this process. I shouldn't have touched my phone.:crying: Good thing I have a spare but that thing isn't recognized by my laptop nor can it get into download mode. but it works. on cm10 so whatever. any help would be appreciated on how to get my vibrant to work, or get the other one into download mode or get it to be recognized by the laptop again
anybody?
Reflash stock jfd and try from therem i had this happen one time. It might take 4 or 5 tries
Sent from my SGH-T959 using xda premium
TRY THIS, good luck.
http://forum.xda-developers.com/showthread.php?t=2229899
Sent from my SGH-T959 using xda app-developers app
Very good. I am soooooooo happy. Now I can put on fishman mod! yes. THank you thank you thank you