I accidently flshed a HD2 T-Mobile USA HD2. The phone just become stone dead. Can not turn on at all, no sign, no charge light. simply nothing, can't do hard reset, too. Is there any way to reflash the rom(with jtag maybe)?
shuai518 said:
I accidently flshed a HD2 T-Mobile USA HD2. The phone just become stone dead. Can not turn on at all, no sign, no charge light. simply nothing, can't do hard reset, too. Is there any way to reflash the rom(with jtag maybe)?
Click to expand...
Click to collapse
Hi
try this: Remove battery, then hold the volume key down, then put battery back in while still holding volume key down. No push power button once (while still holding volume key down.
See if this puts you back to the multi colour boot screen mode.
Russ
russpattaya said:
Hi
try this: Remove battery, then hold the volume key down, then put battery back in while still holding volume key down. No push power button once (while still holding volume key down.
See if this puts you back to the multi colour boot screen mode.
Russ
Click to expand...
Click to collapse
Hi Russ
I try it,but still doesn't work.
Shuai
OK do you know if you had a full charge on the battery when you started? Try to charge the phone up(while off) see if the little red light comes on. If it does, leave it until it goes green, then try a reset. That the little red button on the left at the bottom where the cover sits. use a pen to reset this and then try the volume down and start. See if we can get some where this time
Russ
What did you flash??
was there a radio involved.......... did it have .51. in the name???
If so then its dead. JTAG is your only option........ or warranty but you didnt hear that from me...........
This is what you call a bricked phone. Well, I hope you have warranty.
shuai518 said:
I accidently flshed a HD2 T-Mobile USA HD2. The phone just become stone dead. Can not turn on at all, no sign, no charge light. simply nothing, can't do hard reset, too. Is there any way to reflash the rom(with jtag maybe)?
Click to expand...
Click to collapse
I feel so sorry for you !! how the hell you just flash a ROm..without thinking...
did you go over the instructions ?
did you make sure you were flashing the correct rom even ?
Cant help you much here...but just hope your device is functional again !!
Related
Help Guys,
My Power Button is not functioning, when its on i cant turn off the screen by pushing the power button, I have to wait until it shuts down by itself.
and when it shuts down i cant turn it on again by pushing the powr button.
my way to circumvent this is by not enabling the key lock and by pressing any the other keys when its in sleep mode.
I Tried soft reset but it hard resets even if i didnt press the power button.
Should i send it back to HK?
I have the following:
XdaII
ROM ver 1.52.00WWE
Radio Ver 1.05.14
yeah it sounds like there is something wrong with the powerbutton switch
your problem may due to power botton is hang. i used to encounter with that problems. First is due to Battpack when i use shut-down button in Battpack, it's hang. when i soft reset it turn to hard reset. For sure, you need to uninstall any programs that interfere with button mapping and try to use for a period. IF Problems still persist, you should return it to your vendor.
tumtum,
I have the exact problem, but even doing a hard reset and installing only default programs (fresh install) my power button still does not fuction.
What else can i do besides removing sofware?
Help pls.
THanks,
there should be problem with oiwer-button. Like i said earlier, it should be problem with your device. You must return your device to your vendor and check for power-button. somebody in my town has been faced with that problem and he return it to the shop. Shop said it is rpoblem with power-button.
well the thing is..
today i let my friend press the button and whala it worked!
dont know how it happend by now it works fine
thanks for the replies
looks like you'll be spending pretty much time with your friend then
Ditto...
I currently have this problem, my xda II was dropped (by a so-called friend!) it was in a metal case thank god so theres no obvious damage. later that day a program crashed... so i soft reseted it. unfortunately it didnt it HARD RESET i pondered why then tried to turn my device off! with no avail... so b4 it gets repaired (under warranty) I took the black plastic off the back to see if the button was stuck under the casing.... when i peeled it off i looked for the button... it wasnt even there! altho theres no sign of damage wat so ever (no scratches or marks) on the casing, the power button has been clearly wipe
off the circuit board!! if u shake it u can hear it rattling in the depths of the XDA and now its off it doesnt hard reset on a soft reset anymore thank god! im fed up off re-customizing the damn thing and my nearest shop 4 repairs is 8 miles away :-( (brought on the net) so all in all maybe thats the same problem a few of u are experencing Good luck C2k4...
Same problem here ...any HELP
Hi Friends,
I screwed my HTC Hermes power button while trying to fix its earlier problem.
Now to turn the backlight on ..i changed the settings and I can now use any button to bring it out of Sleep mode....
I used a program available on this site to enter bootloader.
However, the problem remains when "power button" is to be pressed.
Any advice on how to get over the "Press power button" to start the ROM flashing....
milind_s16 said:
Any advice on how to get over the "Press power button" to start the ROM flashing....
Click to expand...
Click to collapse
There is a sticky at the top of this forum for flashing with a broken power button if you have a Himalaya. I am not sure if the same process would work for a Hermes or not, but I would be interested to know if it does. If you power button is still intact though it may not be worth breaking it to find out!
Jadel said:
There is a sticky at the top of this forum for flashing with a broken power button if you have a Himalaya. I am not sure if the same process would work for a Hermes or not, but I would be interested to know if it does. If you power button is still intact though it may not be worth breaking it to find out!
Click to expand...
Click to collapse
Thanks Jadel...I will surely give it a shot..and let you know ... thanks for the answer...probably, I shld have found it earlier .....
My brother has a stock alltel 6800, brand new. He wanted to upgrade to dcd's ROM like I did but he thought he had to flash the 3.27 radio after the ROM so now he is stuck at the alltel screen. I have tried everything i could to fix it (which is still not that much because im just starting to flash myself) and nothing has worked.
Any help would be greatly appreciated
What dcd did you flash?
Hold down the power and camera button and hit the soft reset. Make sure you hold down the power and camera button after you soft reset till boot loader screen comes up. Load org rom.
bricked
DCD 2.3.2
and i did try holding down power+camera and hitting reset but it just restarts and goes to the alltel screen
theBassist said:
DCD 2.3.2
and i did try holding down power+camera and hitting reset but it just restarts and goes to the alltel screen
Click to expand...
Click to collapse
Make sure you hold down the power and camera button after you soft reset till boot loader screen comes up
i did but it just stays on the alltel screen
i know its suppose to bring you to the bootloader but when i tried it just did a soft reset
You have to HOLD them all down UNTIL screen pops up...if you let go to early it will just reset.
well its still not working
i just want to know if there is any way that you can get stuck on this screen with no way to fix it because for all i know one of the buttons might be broken
well its still not working
i just want to know if there is any way that you can get stuck on this screen with no way to fix it because for all i know one of the buttons might be broken
Click to expand...
Click to collapse
Pull the battery out, leave it out for 10 seconds, put it back in. Don't press the power button, but instead, hold power+camera and reset to enter the bootloader.
no good
tell me what i should do EXACTLY and what i should see while doing it then
theBassist said:
no good
tell me what i should do EXACTLY and what i should see while doing it then
Click to expand...
Click to collapse
hold power+camera and have your stylus pressing the button on the bottom of the phone...hold until rainbow screen
first of all, should it even be going through the reset routine (vibrates, htc screen, alltel)? because no matter what i do whenever i press (or hold) down the power button it resets.
So you are holding the power button and the camera button and having your stylus holding in the reset button on the bottom of the phone? HOLDING ALL OF THEM...lets say for 10secs?
still not working, just resets.
well one last question then,
i take out the battery, wait a little and put it back in, i hold down the buttons and it turns on, goes to the htc screen, then alltel screen.
is this how it is suppose to look or is it suppose to go straight to the bootloader because im now very certain that it must be a button malfunction
when holding in the buttons like that it should go to a tricolor screen...not reset...it will just reset if not held in long enough though
It is tricky but,,,,,
I have one that my camera button is sort of recessed a little and hard to make work, maybe his is also and may be even broken like he says as it is behaving like he is not holding the camera button. If it is new then I would take it back to them and say "it just did this" and play greeeeeen as grass dumb,,,,that is if you reeeeeeeally can not get it to the bootloader screen which would help.
Hi Guys,
I have recently successfully flashed my Nike to the NIKI_ROM_MARY_v0.3.3. It was working fine for the past 3 days apart from the odd frozen screen coming out of sleep mode (i think that had to do with some sleep/lock setting)
Then out of the blue I notice it power was off.
- I tried pressing and holding down the power button
- Removing the SIM, micro SD and battery and replacing with another battery
- Connecting to PC
- Charging
All to no avail...
Has anyone have any other suggestions before I return for warranty?
This worked for me; take the battery out leave the sim and memorycard inside the phone, attach the powercord wich is connected to the wallsocket ofcourse and switch the phone on, and then insert the battery........
2nd post cannot delete it?
i'm not sure but i dont think they will repair under warranty as you have changed the software
Same issue
I have the same issue with Mary's v4.0, if i reset or switch off the phone, it just dies, whatever I do it will not switch on.
I managed after 2 days, the keep trying to plug in ac power, with no battery, got a red charge light and then insert the battery, then hold down the power button, finally it booted, now i dare not switch off or soft reset.
obsydian said:
I have the same issue with Mary's v4.0, if i reset or switch off the phone, it just dies, whatever I do it will not switch on.
I managed after 2 days, the keep trying to plug in ac power, with no battery, got a red charge light and then insert the battery, then hold down the power button, finally it booted, now i dare not switch off or soft reset.
Click to expand...
Click to collapse
Here run well!!!
Flash my phone 6 or 7 times a day with new test and don't have any problem.
More details!!
Quentin Gran Torino said:
This worked for me; take the battery out leave the sim and memorycard inside the phone, attach the powercord wich is connected to the wallsocket ofcourse and switch the phone on, and then insert the battery........
Click to expand...
Click to collapse
if this does not work, then hold the on button and keep trying to insert, then remove and insert the battery until it starts (hopefully).
Just flashed another ROM, so doubt its ROM related, my suggestion is do the above, flash back to your original ROM and SPL, then send it back under warranty, this will be my 4th NIKI under warranty !!!!!!!!!!!!!!!
Quentin Gran Torino said:
This worked for me; take the battery out leave the sim and memorycard inside the phone, attach the powercord wich is connected to the wallsocket ofcourse and switch the phone on, and then insert the battery........
Click to expand...
Click to collapse
This worked for me. Seems to be a problem with the HTC Touch Dual. Several people I know have had the phone shut down for no reason. After the above, I did a soft reset.. No problems since... Touch wood!
Terry
Hmm, okay I know it's an old thread but I have the same issue but it happened with the original rom, I finally bring the phone back to life unfortenally not with my own sim-card.
For now I'm scared to do a sofreset because I think I lost my phone again just wondering what I can do, maybe someone on this forum have a solution for this.
Regards
I had exactly the same problem... may anyone be more specific?
http://forum.xda-developers.com/showpost.php?p=5579171&postcount=641
teorouge said:
I had exactly the same problem... may anyone be more specific?
http://forum.xda-developers.com/showpost.php?p=5579171&postcount=641
Click to expand...
Click to collapse
Hi teorouge, sometimes I got my phone back, what I did was:
1. Remove battery
2. Pressing softreset button about 10 times.
3. Insert battery and keep pressing the powerbutton until the phone reacts.
It's not a fix, the only thing you can do is use the phone but if you do a softreset the problem is back.
Personally I think the powercircuit is broken, I had to buy myself another Niki.
Regards
Rataplan said:
Hi teorouge, sometimes I got my phone back, what I did was:
1. Remove battery
2. Pressing softreset button about 10 times.
3. Insert battery and keep pressing the powerbutton until the phone reacts.
It's not a fix, the only thing you can do is use the phone but if you do a softreset the problem is back.
Personally I think the powercircuit is broken, I had to buy myself another Niki.
Regards
Click to expand...
Click to collapse
Thanks for the answer, I gave the Niki back to his owner... it's a corporate phone so he shouldn't personally pay any money (and me neither, that's for sure!) to get it repaired. Thou I hope for him they'll change it to a newer (and feature-rich) device!
Hi guys,
Im wondering if any of you HD2 pros can help me out. My power button recently stopped working. Now I cant turn on my phone Is there anything AT ALL I can do to turn my phone on?
Thanks for any help at all.
Edit: After trying everything I could think of I found out that if you hit the soft reset button on the back while plugged into a power source it will boot up!
you can use an app..that powers on your hd2 with shaking the phone...it is in the themes and apps section....may use up a little battery
Is this what you meant?
"Device wakeup by shaking" - http://forum.xda-developers.com/showthread.php?t=612267
pakure said:
you can use an app..that powers on your hd2 with shaking the phone...it is in the themes and apps section....may use up a little battery
Click to expand...
Click to collapse
Well I can wake the device by hitting the call key, my problem is once my phone dies or if it freezes and I have to pull the battery, I cant turn it back on since I have no power button. Has anyone else had their power button broke? Was it a hassle to get fixed? Thanks for any help guys!!
Yes, put your phone on charger and take out the battery and put it back in and it should turn on without holding the end key.
PINki92 said:
Yes, put your phone on charger and take out the battery and put it back in and it should turn on without holding the end key.
Click to expand...
Click to collapse
Hey guy...
You've stolen my idea.
I admit it
Need some help over here.
My phone is updated to the newer version of android. It is no rooted, and i have never tried so.
My phone doesn't responde to the power button. (so I can't open it).
I tried to restart while holding the power button + vol down button,
the only responce is a roar from the vibrator.
I can't charge it (the red lamp doesn't light).
Althought I can feel that is reletavilly hot
What should I do?
yiangoun2112 said:
Need some help over here.
My phone is updated to the newer version of android. It is no rooted, and i have never tried so.
My phone doesn't responde to the power button. (so I can't open it).
I tried to restart while holding the power button + vol down button,
the only responce is a roar from the vibrator.
I can't charge it (the red lamp doesn't light).
Althought I can feel that is reletavilly hot
What should I do?
Click to expand...
Click to collapse
Try a different plug point.. are you using the original charger ???
This usually happens if you are using a different charger with Incompatible voltage..
Or could be something else also which i am not sure though ...Was just trying to help you..Sorry if i couldnt.. :highfive:
Nope, this not helps.
I am feeling that everyconthing has wiped from the phone.
I do not know why.
The phone is in stock condition.
Any other advice?
This may seem stupid but try to call it from another phone, there is a "small tiny" chance that you hear it ring or beep on the other phone.
The reason I am telling you this is the "vibration" you feel with no display. There might be an issue with your screen. Give it a try.
If it's not rooted then you have your warranty , so call customer service and give your phone in if the problem persists with no solution.
Good luck
Sent from my HTC One X+ using xda app-developers app
Hold down power button for 30 seconds, until lights stop flashing, and phone will reboot. Only power button, no volume buttons