Does anybody know where to find the bottom button circuit board? I ripped the cable on mine when converting the phone to a white case. If not - is there a way to fully use the phone without those buttons? I have to restart the phone if I want to switch apps
ixenn said:
Does anybody know where to find the bottom button circuit board? I ripped the cable on mine when converting the phone to a white case. If not - is there a way to fully use the phone without those buttons? I have to restart the phone if I want to switch apps
Click to expand...
Click to collapse
Google is your friend. Or try http://mobile.brando.com.
i have an old xperia x10 if you want to buy spare parts..sad part im from sweden
I sent you a PM , I am interested in getting the part from you - or maybe just the whole phone if its worth it.
Related
The power button has been a little fussy...requiring a hard press to power up but it had been until today. Button does not give a tactile "click" when pressed. Out of warranty. Opened it up...the microswitch isn't "clicking" Used a needle to jump the switch and it is now powered up but would like to know
1. is it fixable? (I don't solder and haven't a clue on where to get the microswitch)
2. Does the main board have to be replaced to fix it? Where can it be ordered?
3. Does anyone know of a reliable place that can either fix the switch or replace the board? I'm not going to deal w/ At&t; this was a replacement for the white screen of death and until today; it's been perfect. Everything else is working, perfect screen, case, keyboard. Battery stays charged for 12+ hours even w/ bluetooth running for over 18 months.
You cold look on ebay for a "broken" Hermes. I got a couple and found there wasn't anything wrong with them.
I don't know where you might be able to get a microswitch from but it will require soldering to fix. Unfortunately the Hermes motherboard is multilayered and this may mean fixing yourself may not work. Taking it to someone WILL cost $$$ so be sure to try and pin them with a quote for parts and labour before they "attempt" to fix it.
Good luck...
Power button screwed ..any HELP!!
Hi Friends,
I screwed my HTC Hermes power button while trying to fix its earlier problem.
Now to turn the backlight on ..i changed the settings and I can now use any button to bring it out of Sleep mode....
I used a program available on this site to enter bootloader.
However, the problem remains when "power button" is to be pressed.
Any advice on how to get over the "Press power button" to start the ROM flashing....
I found the part on celluardr.com for 32.00 which I think is a little expensive! They may be able to change it but that will cost $$. A possible solution is to clean the switch with an electronic cleaner solution that evaporates very quickly. I suggest you remove the battery with the case open to expose the switch - really mean remove the back casing to expose the motherboard and with the tube attached to the spray can squirt in the solution. Press the switch in before the solution dries - you may have some crap that got in there and is sticking up the switch mechanism. Dirt will do this.
QUESTION: What program/changes did you make to change the phone's ability to recover from sleep mode? I'd like to preserve the power button on mine and use another key that can be replaced without changing the motherboard - Ie the front phone buttons.
stim141 said:
I found the part on celluardr.com for 32.00 which I think is a little expensive! They may be able to change it but that will cost $$. A possible solution is to clean the switch with an electronic cleaner solution that evaporates very quickly. I suggest you remove the battery with the case open to expose the switch - really mean remove the back casing to expose the motherboard and with the tube attached to the spray can squirt in the solution. Press the switch in before the solution dries - you may have some crap that got in there and is sticking up the switch mechanism. Dirt will do this.
QUESTION: What program/changes did you make to change the phone's ability to recover from sleep mode? I'd like to preserve the power button on mine and use another key that can be replaced without changing the motherboard - Ie the front phone buttons.
Click to expand...
Click to collapse
Hi stim141,
Thanks for your suggestions.. i shall give it a try and let you know the progress (if any)
ANSWER: From Start-> Settings-> System-> Key lock
Change the settings here to see that NO buttons are locked when in STANDBY/ SLEEP mode - when backlight turns off.
This will help to bring the device out of standby/ sleep mode.
You can have the device lock enabled so that when in sleep mode no functions are activated if any button is pressed accidentally. when any key is pressed ...it just shows you the UNLOCK option.
Also, I read somewhere, sliding out the keyboard slightly also wakes the device.
When ever I have the phone on the volume will keep turning up stopping me from doing anything on the phone. I tried restarting it and it has been fine for about 4 months and not covered by warranty since bought from someone has anyone else seen this problem.
If so how could I sort it out. It has had a custom rom and hspl from when I bought it meaning it was fine when he had it as well but now the phone just won't stop turning the volume up.
Thanks if you can help!
I wouldn't know, but it sounds to me your 'volume-up' button 'hangs'.
flr said:
I wouldn't know, but it sounds to me your 'volume-up' button 'hangs'.
Click to expand...
Click to collapse
This is the weird thing the rock switch is fine. Guess may just have to take it in for repair or sell it and get the HD7
Loved this phone
"My stuff doesnt work, ah well too bad i'll just send it on ebay"
I hope ur being 100% transparent and warning potential buyers...
I much prefer the old style of presentation of the HD2 than HD7, plus i love physical buttons So will never switch my HD2 for HD7, even if it was possible to do so for free
The volume buttons may be misaligned/shorted by some conductive residue. If you're up to it, open us your phone and peel out the white portion above the volume buttons, cleaning the contacts with alcohol and realigning the metal buttons if necessary. Just be careful not to over-bend the flexible ribbon cable that attaches the volume buttons to the mainboard. This should solve your problem.
zewill said:
"My stuff doesnt work, ah well too bad i'll just send it on ebay"
I hope ur being 100% transparent and warning potential buyers...
I much prefer the old style of presentation of the HD2 than HD7, plus i love physical buttons So will never switch my HD2 for HD7, even if it was possible to do so for free
Click to expand...
Click to collapse
I was gutted with it when it broke but I am sending it to one of them useless recycle places through o2.
I hate the capacative buttons and HD2 for me was awesome but I just can not be bothered it opening it or getting it repaired. I mean everything else is in great condition just I think some water or something got between the rocker.
Damn snow
same problem with the volumn keep turning up
i'm having the same problem like yours. also i have the HD2 for a couple years . it' just starts to act up now. it's very frustrating. did anyone fix this problem?
So my phone is in perfect condition i've had it under a month there has been no major damage to it, it looks new and has been in an otterbox all its life with another screen protector on it.
But when i woke up this morning the touch screen wouldn't respond. I could use all the buttons and they worked i could even pull up s voice by holding the home button and then pressing back button and get to android home menu with the app. But the touch screen would not detect my fingers at all.
I don't see how its possible it has got any damage it is in perfect condition.
Does anyone have any suggestions? I think i read somewhere about resetting the digitizer?
And as far as resetting it to factory and or going to a different firmware. Since i cannot access my apps i cannot really backup my phone and it has really important info that i can't lose. So i'm stuck in between 2 walls and i am screwed.. Any suggestions?
Oh and i also removed the otterbox and screen protector to make sure nothing trapped underneath it was causing interference. No luck. :crying:
zaxies said:
Oh and i also removed the otterbox and screen protector to make sure nothing trapped underneath it was causing interference. No luck. :crying:
Click to expand...
Click to collapse
if not rooted send it for warranty, and if it is rooted unroot it first and check download mode status before claiming warranty.
use a usb otg cable and usb mouse to navigate the screen.
You can make a backup using adb
zaxies said:
So my phone is in perfect condition i've had it under a month there has been no major damage to it, it looks new and has been in an otterbox all its life with another screen protector on it.
But when i woke up this morning the touch screen wouldn't respond. I could use all the buttons and they worked i could even pull up s voice by holding the home button and then pressing back button and get to android home menu with the app. But the touch screen would not detect my fingers at all.
I don't see how its possible it has got any damage it is in perfect condition.
Does anyone have any suggestions? I think i read somewhere about resetting the digitizer?
And as far as resetting it to factory and or going to a different firmware. Since i cannot access my apps i cannot really backup my phone and it has really important info that i can't lose. So i'm stuck in between 2 walls and i am screwed.. Any suggestions?
Click to expand...
Click to collapse
My phone is in the shop for that and beeing repaired, probably a digitizer malfunction (hardware related). Buttons work but touch does not work. Send it in for repair. They will replace the whole screen.
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
You have to replace the screen of course . Not very expensive i think .
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
My friend broke his XMP screen bro, and in the service center they charged it too heavy such that he can buy an another device
try flashing stock ics just to check if it is software problem else you have to bear expenses if you cant miss such a good device
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
mutlu_live said:
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
Click to expand...
Click to collapse
I need links
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
/\/\ said:
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
Click to expand...
Click to collapse
Exactly the same problem, upper part of the screen (all notification bar). I have an OCD and this tiny things bug me a lot. I guess now I need to find a digitizer to replace it, the problem is that on ebay and other sites there are not HOX+ available, all are for the HOX.
Is there any difference between HOX and HOX+ digitizers? I thought both got the same screen.
I'm not an expert so I won't fix it on my own, better send it back to service .
Btw. I've read one time that you can put a piece of paper between the bezel and grill to clean some mess up which could get inside the phone. I was wondered that I was able to slip the paper there, but it didn't work .
Arcano30 said:
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Click to expand...
Click to collapse
Hi you will find your parts here they sell OEM parts. (http://www.etradesupply.com/htc.html)
Goodluck!
Dont forget to hit the thanks button
Optimus said:
Hi you will find your parts here they sell OEM parts.
Goodluck!
Dont forget to hit the thanks button
Click to expand...
Click to collapse
Anyone tryed to replace screen with digitizer? it helps?
Screen replacement
edenlt said:
Anyone tryed to replace screen with digitizer? it helps?
Click to expand...
Click to collapse
Hi goto youtube and see a video how to replace..
Optimus said:
Hi goto youtube and see a video how to replace..
Click to expand...
Click to collapse
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
edenlt said:
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
Click to expand...
Click to collapse
yes it will work, but you can't only change the digitizer, it's too hard glued together. I broke my LCD connector while replacing the screen although
I was really careful, so it's not as easy as everyone says.
Thx, i will keep that in mind.