I just tried to update my LG optimus une using the LG mobile update software, the update stopped at 5 % telling me the phone is not connected, to remove the USB, and restart the phone, now i'm stuck in emergency mode, and the pc does not see my phone, what can i do ?
http://forum.xda-developers.com/showthread.php?t=843071
I just created new thread Phone not responding at all.
//Lock
thx for the link
Related
Hi!
I'm having problems updating my P500 to the latest available rom. I tried about everything but it gets me nowhere LG software clearely isn't the best, I had quite some troubles with it in the past, trying to upgrade my old KP500 Cookie and apparently, it hasn't becomme any easyer in the mean time ...
First problem I have is that I cannot get the update software to work correctly on my W7home 64bit desktop pc. This is probably my own fault since I connected the phone before installing the usb drivers. Now it keeps trying to install the USB driver but it fails when attempting to install the MCCI(r)Firmware. Is there a way to remove everything and start over from scratch?
Secondly I grabbed my GF's laptop and got the software to install properly this time around and got the update process going. But for reasons unknow to me the LG software crashed at arround 15% when the P500 already was showing a yellow screen. After I removed the battery I got it to boot up again and it seems to be working ok but still shows the old firmware (v10b) on the settings menu. Problem is now that when I tried a second time the LG software won't commence the update process because it detects version v10h, which is says is the latest and no update is nesacery.
So, what now? I'm out of ideas ...
Not even any suggestions?
check this link
bit.ly/ebCgQr
Just change a to d and download with idm by pasting the new link in idm. You will know what am I saying once you visited the link. But make sure you install the p500 driver. If you want you can downloadthe driver from here. I run win 7 ultimate 64 bit so it will work on your machine too.
megaupload.com/?d=FBH1S3O1
megaupload.com/?d=FBH1S3O1
if it help just hit the thanks button.
Sent from my LG-P500 using XDA Premium App
Man, you are my hero!
Worked like a charm, i'm running V10h now and all seems to be fine!
hi,
I'm having a major problem updating my LG Prada 3 UK version from gingerbread to the official ICS update. I've not rooted or done any mods. I'm using the official lg update tool with the drivers installed but the update keeps getting stuck at 7%. I pass all the checks the update tool seems to perform before updating but once the update starts always at 7% it gets stuck. It gives me an error message something like this: "There was a communication problem between the cell phone and the PC", with the option to restart. It tells me to unplug USB and take battery out then turn phone on and restart. I do this but nothing works and again stuck at 7%.
I even phoned LG who said it must be a glitch and to keep trying. That's nonsense I've definitely got some kind of issue here. Oh and I've tried the usual: factory reset, reinstalling the USB drivers and LG update tool. Absolutely nothing works.
One more thing, even using the LG PC Suite to update gives me an error message. So I know this isn't to do with the LG Update tool. I have a Win7 installed.
Please can someone help me with this! many thanks
It's possible there's a bad block in the internal memory. You may be able to check for it through a shell.
If it's under warranty, I would try to send it back.
You could also try flashing with the KDZ tool, but if it gets stuck, you might brick the phone.
To work out what the problem is you need to rule out every variable. First try out a different wire/cable. If it doesn't work then try a different computer. If its still not working then there's a good chance it's a problem with your phone.
Sent from my GT-I9000 using xda premium
NIMBAH said:
To work out what the problem is you need to rule out every variable. First try out a different wire/cable. If it doesn't work then try a different computer. If its still not working then there's a good chance it's a problem with your phone.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I tried a different USB cable, and also a different pc but still the same problem. I was thinking of trying to turn off the download mode thing but not sure how that works. I did hold up volume up and power then inserted battery but all that gave me was a SW Update screen.
I have Lg optimus hub p510 and every time you want to switch it on he walks into emergency mode .
I tried to install via KDZ stock rom , but it keeps happening the same
"PHONE WAS NOT FOUND ! "
All drivers are installed .. Help
Hello everyone i need help!
I have LG G3 Sprint(LS990), its a long story how i get into this problem so ill be short.
I flashed my phone few times and got bricked my phone. now i stuck on LG logo loop it continuously shows me LG logo. Recovery and Download modes not working anymore so i cant flash a ROM right now. after few days of researching i find the way how to make download mode work with laf.img i got everything i need LG driver installed , adb installed on my computer and i got that laf.img for lg g3 ls990 the only problem right now i have is that i can't connect my LG phone to PC, windows doesn't see any changes in device manager when i connect cable.
So here is the question: how can i make my Phone connect to PC while im stuck in fastboot. (i already tried few different Windows PC and Linux also used 5 different cables starting from original one end with other phone cables but still can't make my LG get connected to PC so i can flash a laf.img file to make my download mode work. If you have any other solution ill be happy to accept and try it. Hope for quick response, as its the only phone i got at the moment and its been a few days already that i don't have phone, so my friends start think that im dead or lost already
P.S sorry for poor English
Never could resolve it?
I own an lg v10 H901 with H901 motherboard, tried updating it on lg bridge but it turned off after update finished and never turned on again, i can't even access download mode and when i connect it to my computer it says it didn't recognize the device :/
software version H90110c