[Q] serious screen orientation problem - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

alright guys i think i may be screwed here.
teh phone i got is the HD2 runing widnows mobile "5.2.21869"
now the problems i have is that most of the apps i go in to, teh screen orientation is stuck on landscape and there is nothign i can do to get it back. shaking violently dosen't work for all teh rage fixers out there.
i tryed re-calibrating the G-sensor with no luck. then for a laugh i calibrated it so that the phone though flat was at some obscure angle, then reset to flat, alro with no luck.
i have done the foctory reset located within the operting system with no change, and i have done the manufacture's reset as well (the one where you hold down teh volume buttons and tap the power button).
now i have the firmware update that will most likely fix this but there is a problem (which is where i think im screwed). whenever i plug the phone into my pc, or any other, it simply charges adn will not recognise that i have connected it to a computer. (i have dissabled charging whenever connected to a PC).
so do you have any suggestions guys or am i as screwed as i think i am.

archangelCJ said:
alright guys i think i may be screwed here.
teh phone i got is the HD2 runing widnows mobile "5.2.21869"
now the problems i have is that most of the apps i go in to, teh screen orientation is stuck on landscape and there is nothign i can do to get it back. shaking violently dosen't work for all teh rage fixers out there.
i tryed re-calibrating the G-sensor with no luck. then for a laugh i calibrated it so that the phone though flat was at some obscure angle, then reset to flat, alro with no luck.
i have done the foctory reset located within the operting system with no change, and i have done the manufacture's reset as well (the one where you hold down teh volume buttons and tap the power button).
now i have the firmware update that will most likely fix this but there is a problem (which is where i think im screwed). whenever i plug the phone into my pc, or any other, it simply charges adn will not recognise that i have connected it to a computer. (i have dissabled charging whenever connected to a PC).
so do you have any suggestions guys or am i as screwed as i think i am.
Click to expand...
Click to collapse
After you plug the phone into a usb port on the pc, does a screen pop up on the phone letting u choose from either : charge only, disk drive, or the one u need for update "sync"
If not you might have to download a new windows rom from the hd2 rom section and put it on the sd card
checkout this newbie section on how to
just verify in the settings under phone how what is your rom size
for 512 MB ROM use this http://forum.xda-developers.com/showthread.php?t=609477
for 1024MB ROM use http://forum.xda-developers.com/showthread.php?t=653614
There are instructions there on how to do this without using the usb cable, Just flash thru the SD CARD
Good Luck

Related

HELP!! frozen HD2

so i was trying to put music on to my new HD2. ive had it about a good week and a half. the music never showed up on my device using windows media player sync then then Windows mobile Device center wouldnt recognize my phone.. then i tried to reset my phone and then thats when it happened. i cant get into my phone now.. i tried the whole battery out many many times... but no matter what i do it wont show my home screen. the phone boots up i guess.. it shows the tmobile screen...then the windows screen... but when the home screen is supposed to come up it doesnt.. just the wall paper.... and no buttons n screen touching work... i was able to get into the start menu for a bit but now..... nothing. im about to get my hammer and relieve some stress this phone is causing me... someone please help me out.
try a hard reset my friend, turn the phone off, hold both volume buttons down and the press the power button, its tricky to et first time, but it does work, follow the instructions and youre phone will be back to when you first bought it, bad point is u will loose anything you dont have backed up
but all files saved on storage card will be there after the hardreset.
DN41
It doesnt like being synced with windows media player.......
If you havent already hard reset then theres is a fix for you near the end of this thread
Next time your putting your music to your phone, drag n drop is the way to go........

[Q] HTC HD2 HELP! Phone does not recognize USB

Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
might be the cable that you're using. i used before a cable that is not the original and the same thing happened to me, i.e. pc cannot recognize device.
Try Settings-->Other-->USB To Pc-->UNCHECK (enable faster data sync) this should help...
cable : original came with the phone (used to work up until b4 yesterday) also tried another micro usb cable that came with me N900 but still nothing.
I did the un-check "enable faster sync" still nothing
Did soft reset, hard reset using volume keys, and factory reset from phone setting itself. still nothing.. the phone charges.. but no data transfer.. its something to do with the phone because i tried multiple PC's the phone doesn't bring up the connection type option page
Epiclipto said:
Today i plugged my phone to the usb cable and instead of getting the usual connection option screen... nothing... The phone charges but no Data transfer. Did hard reset, still nothing.. now im stuck with the old firmware... any help plz?
Click to expand...
Click to collapse
Altho u have tried with diff PCs,try reinstalling MS Activesync on one PC.
did that too
when you make/recieve a call, does the loudspeaker come on?
nope everything is normal except no data transfer when connected to usb...
Epiclipto said:
did that too
Click to expand...
Click to collapse
Now pls chek whether USB2 is enabled in your PC Bios...
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Epiclipto said:
The cable used to work before, and I tried it on multiple PCs, how can it be that USB2 is diasbled?
Click to expand...
Click to collapse
No harm in checking.Infact i faced similar issue once and the USB2 was disabled.It took me an entire week to diagnose the problem.These PCs have got a mind of their own and do mischievous things on their own without our knowledge.
But since its not working on multiple PCs,i am not sure.We'll hav 2 wait 4 a solution i guess...
hmmmm.. would a full system format and re-install be possible? and would it fix it? (talking bout on the phone)
HELP, HELP
SAME PROBLEM WITH HTC2 T0MOBILE
even on the boot loader screen, it charges but no USB stuck on serial.
even when on sleep mode and plug the cable orange led is on but it didn't wake up for choose (active syn or stoeag memory)
PLEASE HELP
i can do nothing, HSPL or rom upgrade
the cable and the USB drivers are tested more than 100 times
Most horror problems I had with the USB sync have been down to not having the latest version fo Activesync from microsoft. Uninstall the old version thwen reboot - now download the 4.5 version which I think is the newest and last version they made (unless im out of date) and then reboot the machine, then connect up the phone - but not immediately after the machine has booted wait a couple on mins, Windows takes longer than it often appears to be ready to go. One your hard drive led flashing light has settled down it is probably time to try. Then see if it finds all the devices in your phone.
If it doesnt go into the control panel and double click system, hardware tab, then select device manager and see if there are any devices with a yellow sign with a "!" in them. If there are delete them and then unplug the phone and plug it back in again. It might get past some stuck things. If it doesnt see anything new on device manager theres a menu at the top and look for "scan for hardware changes" this gives teh device manager another look at what its got connected.
If that fails open up the USB section under in device manager - its got a little plus next to it, press that plus and it open up all the names of chips you have for your USB control on the pc's motherboard. Write down the numbers and go and get the correct up to date drivers for that type of USB and install them. Then try the process again. Sometimes deleting the USB drivers and just doing a "scan for hardware changes" again, will reset the USB drivers and start things working, however it can get tricky if your using USB mouse and Keyboard to select anything if you delete the USB, because thats what the KM/mouse relies on to control teh machine, so have a PS2 mouse plugged in if you can. If that fails I would suggest reinstalling windows as its probably knackered. It amazing how things start to work wonderfully on a fresh copy of windows.
I have been where you are! And tried every suggestion that was given here. It all came down to the cord. I actually went through 3 different cords before I found one that worked and found that by accident. I bought an external drive and that cord works. For whatever reason, that is the only cord that now works for me. I only use it for data transfers. i use the other cords for charging.

[Q] No usb connection :(

Hello,
I experience a very weird problem with my HD2.
When I want to connect my HD2 to pc then my pc (and other pc's) doesn't recognize my phone, nothing happens. Also my phone isn't giving me the option between "Activesync" "Disk drive" or "Internet sharing". (Altough the option to ask it on connection is turned on under settings). So not an active sync problem I guess. The usb doesn't seems dead because it still charges, on my HD2 the power sign comes up when I connect the usb to pc and the led is on. When I pull it out then the led goes off and the power sign dissapears. But no "data" connection is possible anymore.
Is something broken in my registry? I tried soft resetting several times.
No hard reset yet but I am waiting to do this, maybe someone here knows the answer.
I started experience the problem after I used Tomtom last week ( i used it alot already) . I experienced a problem that my HD2 was stuck in "Carkit mode" thus when someone called me he flipped the screen and putted speaker on. Even when I set it off under settings it. Navipanel was also turned on. I downloaded the hotfix from HTC for Navipanel and now that problem is gone. My phone is again in normal mode when I call or receive calls. BUT the usb data connection doesn't seems to be working anymore .
Someone here knows the magic answer ?
Can you post the Radio version and ROM version you are using?
ROM version : 1.66.405.2 (76641) WWE
Radio version : 2.06.51.07
Have you ever changed the ROM on your device or is all still origional as you got it from the store?
If origional:
1) bring it back for repair, since its not your fault
2) or install HSPL change your radio and rom
I would just send it for repair when that happens. Specially when its in origional state.
I had this problem once but at the moment i connected the phone through a USB Hub
No it is the official upgrade rom from htc site.
Phone is acting weird also.
Everytime someone is calling it puts the speaker on .
Maybe I try a hard reset for this "fkd up" software?
Would this help?
Hmm did a hard reset and the problem persists.
No usb data connection.
Speaker turns to loud when someone is calling me.
Screen flips sometimes.
Guess it is a hardware problem.
Going to turn it in.
Although I completely agree that your unit is probably on the fritz, take into account that the MicroUSB cable can be the problem as well when it comes to connecting to your pc. I bought some Ebay cables and my phone wouldn't connect properly with those. Charging was no problem.
Yes it is on the fritz i guess.
The problems started suddenly and I also tried another usb cable who was also working fine before.
I managed to get connection yesterday just once after pushing it in the phone and moving it a bit. So I guess the usb input is broken or the motherboard. Guess it is the motherboard because of the other weird problems (when want to call someone the screen turns vertically and puts the speaker on), also when i got called. And this after a fresh hard reset.
Hope they will replace the unit without a hassle.

[Q] HELP!!! Phone bricked?

i was rooting to get the gingerbread 2.3 rom but forgot to disable the voodoo thing. and now its just frozen blinking on the startup Vibrant Samsung screen! im trying to use Odin to flash it but my computer doesnt seem to be reading it, i held down the volume buttons and its now in the downloading screen but nothing is happening. someone please help me!!!
Try placing all the files on odin before you hook up the vibrant to the computer in download mode. It should work.
Also you are not bricked if you can get into download mode.
i cant do anything on the odin, the phone doesnt connect. its like my computer isnt reading it at all. the odin is clear from anything, its blank. all the screen does when it says downloading is just stay on that screen on the phone. =(
srtrod said:
i cant do anything on the odin, the phone doesnt connect. its like my computer isnt reading it at all. the odin is clear from anything, its blank. all the screen does when it says downloading is just stay on that screen on the phone. =(
Click to expand...
Click to collapse
What I might try to do first is take a step back into familiar territory. First listen for the familiar connection sound just by having your phone on. Do a checklist. Do you have the correct samsung drivers so your computer will recognize your phone in the first place? If you do, then try opening odin, putting your phone into download mode, and seeing if you get that familiar connection sound. Sometimes, you just need to unplug the phone and plug it back in. Once you see the yellow com port light up with a number, you should be good to go. If none of that seems to work, no matter how hard you try, try little variations like taking your sim and sd card out, and just putting the battery in, etc. Sometimes is the dumbest things that work, and sometimes you don't even realize you're skipping a step. I do it all the time. If you can get odin to recognize the yellow com #, you should be in business. At that point you would just need to flash the stock rom.
You might be having the issue because Axura and Bionix roms don't play nicely together, especially if you go from the former to the later. You'll run into gremlins like your market issue. You can always try a factory reset for kicks and see if maybe it's something that simple without having to go through all of this. Good luck!
ok i just tried all that, NOTHING works! i know the sound it makes when u connect to the pc but it did nothing. when i hold the power button and the volume it shows a battery that looks drained. i left it to charge for about an hour and still shows the grey battery across the screen. what kind of samsung drivers do i need i already tried downloading a couple but they just lead to some computer scan crap and wana charge me. im kinda new to this so i need as much help as i can get. thanks.

Touch screen not working.

Hi guys. I'm totally new to the android/smart phone world btw. Anyways, I recently got my Samsung Galaxy S2... first thing I noticed, my touch screen wasn't working. I popped the battery in and out and then it started working as it should.
My phone was working fine this morning, then all of a sudden out of no where, the touch screen stopped working again. I've tried turning on/off the phone multiple times. I've taken out the battery and even my SIM card nothing... i'm worried.
Has this happened to anyone else? Is there a fix? Do i have to go through Samsung? I hope not. Incase anyone asks, I did not root my phone.
Any help/feedback would be appreciated.
When the touchscreen stops working... were you charging the phone at that time?
The first time i turned on my phone, was actually by accident and it was charging.
However, just earlier now, it was not. it was just sitting on my computer desk. The home button, lock button and touch capacitive buttons work.... but i can't get past the lock screen
you could try a factory reset to see if its software related, but it sounds like hardware. I would definitely Return the phone .
I guess I can't do a factory reset, since I can't get into any of the menus... man this sucks. I spent $900 *gulp*
To do a factory reset,
1. Turn the POWER OFF, pull the battery out and put it back again.
2. Simultaneously press and hold the Volume Up, Home and Power button
3. If the Samsung Symbol appears, release the Power button
4. A Boot Menu will then show, Use the volume up/down to choose wipe data/factory reset.
touch screen not needed this way.
oo that's interesting... I tried it. and it didn't get to a boot menu. maybe I was doing it wrong. I tried a few different ways, but no success. It turns out I have warranty with the store. They're going to replace it for me Thanks for the feedback guys. Awesome forums.
Something similar happened to me yesterday. When I had the in-box USB cable attached to a BoxWave VersaCharger (combined AC/DC charger), and the VersaCharger was plugged into 120V AC, the touchscreen would stop working. As soon as I unplugged the USB cable from the SGS2, or plugged the VersaCharger into a 12V DC lighter socket, the touchscreen would work fine.
I've got the same problem as the OP... I had my phone charging overnight and this morning when I first went to use the phone I could not unlock the screen. I could wake the screen via the home button, and see I had a missed call etc but it just wasn't responding to touch. BTW I can't remember if when I first tried to unlock the phone if it was charging or not but really this shouldn't matter.... oh and btw, I'm not rooted or anything either! Naturally I rebooted the phone but still the same problem....so I tried a battery pull and still the same problem. Just now I did a factory reset but the touch screen still isn't working! I guess this is a hardware problem so I'm going to get it fixed under warranty by Samsung! Gutted that I will likely be without my phone for a week or 2!
EDIT, UPDATE...
Well, I was just on my way to the repair shop Samsung warranty had told me to take it too, and I took my sim card out to put in my old Hero (the only thing I hadn't tried!) and I couldn't believe it but the touch screen started working fine again! Weird, but that is now my advice if anyone else has a problem with their touch screen not working - oh and I took the sim out whilst the phone was still turned on. Crisis averted!
UPDATE 2
Sadly this has happened about 4 times to me now and I'm just waiting for the inevitable next time. Each time doing a factory reset then taking the sim card out seems to bring the screen back to life (though last time not immediately) but I shouldn't have to put up with this. Problem is, I don't want to send off a seemingly perfectly working phone to get repaired as I fear they will struggle to notice the problem, never mind fix it! I'm hoping a new firmware comes out soon, in the hope that it may resolve my issues...
Me as well ...
I have had this happen to me twice now (Touchscreen not responding).
The first time I had just installed a game and thought it must have been related to that. Pulled the battery and no joy, left it for a while and it came back to life...
Second time I was surfing the web and it stopped responding, pulled the battery and left it for maybe a minute but no joy .... pulled the battery again and left it for probably 20min and it came back to life. When it came back up I noticed the livewallpaper had been turned off and my widgets were gone from the homescreen.
What I did notice when it wasn't working was it had "safe mode" displayed at the bottom left of the screen
Have the Same Problem
Have the same problem i Mine and was super exicedat first it worked fine and after charging the touchscreen stopped working i pulled the battery out and put it back in but no luckso im gonna return mine to the shop hope they replace it
Moral:AT FIRST SUPER EXICTED BUT NOW SUPER ANGRY
Same issue - Is there ANY way to save my data before I send it in for repair/replace?
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
blaubeer said:
Hi all,
As of this morning, I have exactly the same issue as the OP. Screen doesn't react to touch, with the exception of the capacitive buttons. I found a dude on YouTube that had the same issue: youtu.be/0oIdllWiV4I
The last thing I did with the phone before it started misbehaving was to answer a call. The phone was on the charger when the call came in - I can't recall whether I unplugged it before answering, or after, or at all during the call. Not sure it has any relevance anyway, only mention it because I've seen reports of people's screens no longer reacting to touch when the phone is plugged in to a charger (apparently it even states in the manual that this may happen).
Anyway, whilst all my contacts, SMS, photos etc are backed up to the cloud, the same can't be said for my app data. Before I lose hours and hours of progress in various games, or all my settings in numerous other apps, etc, can anyone think of any way to get access to the memory of the phone, bearing in mind the following:
I can't connect to Kies to pull a back-up because bluetooth is currently enabled on the phone and when one connects the USB cable, it says "Activating USB mode will deactivate Bluetooth. Continue?" but I can't click the Yes button
I can't connect in USB mass storage mode because I can't navigate to the settings menu entry to enable it
I can't turn Bluetooth off in order to get Kies working, becuase I can't get to the settings menu or pull down the notification bar to reach the power control.
I can't use Voice input to control the device (on the off chance there was a "bluetooth off" voice command) because (presumably with the most recent firmware I flashed via Kies a few weeks back) for some reason Vlingo is no longer the app on the double-home button action. Instead it calls Samsung Voice and wants to walk me through a first use tutorial, but I can't click the next/skip buttons
I installed via Android Market push the app belonging to www_remoteaccessphone_com as it promises to be able to remotely switch bluetooth off, but the website says I haven't installed the app yet, presumably because alrhough I was able to install it without touching the phone, it probably needs to be run at least once to set it up, and I obviously can't do that
I can't start Kies Air to try and get my data that way (starting it would require using the touch screen)
Kies via bluetooth isn't supported on Android
Needless to say, the data I'm trying to retrieve is on the internal memory, not the SD card. As you can see I've been trying all sorts of creative things, but I'm fairly sure I'm screwed. Any bright ideas I haven't thought of?
Click to expand...
Click to collapse
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Nitrile said:
flash it with CF-root, boot into CWM recovery, do a nandroid backup after that, use CWM recovery again to mount USB storage, connect to your PC and pull everything off.
Click to expand...
Click to collapse
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
blaubeer said:
Thanks for the quick advice. I guess I'll need to use my girlfriend's phone to download CF-root and then transfer the SD card to my device. Quick question before I proceed though - is it possible to remove all traces of such tampering, since I've already made out with Samsung that I'm sending it in for repair, and I'm not sure they will honour the warranty if they see it has been rooted etc.
Click to expand...
Click to collapse
get a USB jig off ebay or amazon to reset the flash counter. should not cost more than 5 or 6 euros, shipped.
anyways you need to flash CF-root through ODIN if you are coming from stock. instructions are all in chainfire's cf-root thread.
Nandroid Restore
So I successfully rooted, used CWM to do a Nandroid backup, mounted the sd_card and saved the contents (including the nandroid backup) to my PC, reflashed the stock rom & kernel, usb-jigged it to get the counter back to zero/original and sent the phone in for repair. My efforts paid off as they repaired it without question under warranty. I just received the phone back and today set about restoring my backup:
Copied the sd_card contents I'd saved to my HDD back onto the phone
Re-roooted it with Cf-mod.
Used CWM to restore the backup I took before sending it in
It restored boot/system/data/cache successfully
selected reboot now in CWM
The result is that it is still missing all my apps. It only seems to have the "data" like my camera shots and SMS messages, system settings like whether bluetooth is on or off, the volume level, Wifi networks etc. So something was restored. But there is no Google Account configured, the lock screen picture is the default not the one I had beforehand, and as I said, all the apps - the main reason I did this whole thing as my personal data is all backed up to the cloud on a regular basis anyway - have not been restored. Am I confused? I thought a nandroid backup took a complete snapshot of everything, apps included.
Finding out the list of Apps I had in order to reinstall them is not an issue - I have a list of everything I had installed saved on AppBrain. But if I reinstall the apps, all the settings (or progress in the games) within those freshly installed apps will be back to square one, not where I left them, right? Or should I reinstall the apps and then restore the data partition over the top again?
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
achillies400 said:
Are you guys using any type of screen protectors, cause if you are, that may be the issue s their have been reports that the screen becomes unresponsive with certain screen protectors when connected to a charger.
However, if you are not using a screen protector, then I would suggest getting the unit replaced as you should not have to do anything, root or otherwise, to get the touchscreen working on a touchscreen phone
Click to expand...
Click to collapse
Nope, no screen protector or any kind of case for that matter. Anyway, that isn't my issue anymore. The touch-sensitive unit was defective, the phone was repaired under warranty. My issue now is getting my apps & settings back. I have meanwhile read elsewhere that Nandroid doesn't back up the apps - pretty deceptive "backs up everything!" "it is like time travel" etc comments around here then.
Anyway, I reinstalled all the apps I had previously, and thought by reapplying the data partition from the nandroid backup it might then bring back the settings for the reinstalled apps. Instead all it did was remove all those apps again - now I am really confused. How come the restore DOESN'T bring back the apps I used to have, but DOES remove the ones I subsequently install. Does Nandroid touch the apps or doesn't it?
Touch screen not working
So i am having a very peculiar problem related to the GT-I9100 Touch Screen.
I bought the phone from Saudi Arabia and I live in Bangladesh at the moment. So for now I don't have warranty.
I bought it on 4th of this month. It had 2.3.3. So I updated it to 2.3.5. I did not use the phone much before that so I don't know if this problem was there before.
So here is the problem.
First time I noticed it when i pulled the phone from my pocket and could not unlock the pattern. First I thought I forgot the pattern. After sometime I noticed that i could not touch the buttons. I was dragging my finger over the points but there was no connecting line. I restarted the set. But it still did not work. After sometime I took the battery out. And after that it started normally and unlocked. And the touchscreen is totally fine.
I tested it using *#0*#. And every single point in the screen registers touch.
After that this happened couple of times. First couple of days I thought it was a pattern unlock problem. But i tried PIN and Password even using no unlock. It happened in every case.
So after couple of days it totally stopped happening.
But from yesterday it is happening again. And today it happened 3 times.
So today as I had no unlock protocol i tried tapping Home twice. As this brings on the voice command menu. And for the first time i was in the phone without touching the screen.And first i noticed the Menu and Back Soft keys works.And the touchscreen still does not work. And i noticed some thing weird. Always some thing in the screen is Selected. In Menu the + Icon is selected. In first screen the Map icon is selected. Also in Recent Apps the first App is selected. So after a lot of reboots it is back to normal again. Now i see something interesting. In the Battery Usage Graph i can see some really sharp drops. 3 times. Looks like when this happens phones charge takes a nose dive.
So here is the Gist.
Info related the Problem:
1. Usually happens when the phone is my pant pocket for sometime. It does not happen if it is sitting on the table.
2. Touchscreen gets totally disabled.
3. I have no idea why this happens.The exact reason behind it.
4. Battery Charge takes a nose dive when this happens. See the attached images.
5. I still don't know how to bring it back. Sometimes a simple reboot works. Sometimes I have to pull the battery. And sometimes it works on its own.
6. Every other function of the phone works. Like music playback using my UE 200vi music keys using PowerAMP, Siri(Android version), Call can be received using headset.
Battery nose Dive:
dl.dropbox.com/u/30943431/SC20111115-203017.png
dl.dropbox.com/u/30943431/SC20111116-202913.png
Also the selection
dl.dropbox.com/u/30943431/SC20111116-202146.png
So this is the thing. My biggest problem right now is, I don't know why it happens and I don't know how to bring it back from this situation. If I knew I could make sure I don't get it again or I would just fix it every-time. As when this happens I cant make calls or anything which requires the touchscreen.
So guys help me if you can by giving ideas. As i will not go back to KSA in 6 months. So buying a $550 phone unlocked was a total waste. As i cant use it here.
Thanks a million in advance.
---------- Post added at 09:29 PM ---------- Previous post was at 09:13 PM ----------
Sorry for this. But looks like i cant post outside links before i have 8 posts. So i removed the "ht tp : //" part of the links. Copy paste in browser address bar and it will open fine.
And also the next time it happens i will do a video to shou you guys.
Having the same problem while charging touch screen doesn't work
Stock charger and usb cable
i was on CM7 but that happend so i flashed stock but no luck
I will write more observations

Categories

Resources