http://www.megaupload.com/?d=94BMLZW8
Flash this with the PDA option in Odin. This is good if you want to restore your phone to complete stock without having to reflash the DJ05 modem, etc.
THIS IS FOR THE VERIZON FASCINATE ONLY.
DO NOT FLASH THIS TO ANY OTHER GALAXY S VARIANT
THIS IS NOT ROOTED YOU WILL HAVE TO REROOT AFTER RESTORING THIS. DON'T ASK IF IT IS ROOTED BECAUSE IT ISN'T.
Also, DO NOT flash this if you are going to bring your phone to Verizon for repairs/exchanges as Verizon hasn't released DJ05
If you want to bring your phone into Verizon due to warranty purposes go to this thread and flash DI01 instead.
Just like Adrynalyne's DI01 Odin package this flashes:
Modem
Kernel
System
Recovery
Formats:
Cache
Data
DBData
Remeber!! Use this at your own risk! I am not responsible if you brick your phone by flashing this to the wrong phone or power loss or any interruption to the flashing!!
EDIT: Apparently my hosting sucks. and so does my upload speed, so i blame that for there being problems with the download. Sorry again! New link should work. Uploaded to megaupload.
EDIT2: Apparently since people don't like to read. This will not give you root and this will put on unrooted factory DJ05. You will lose all of your data as well.
is it normal for odin to kinda "stall" when it saids "SetupConnection"? i haven't seen odin do anything for a few minutes now.
DJ05
Just says fail on start. No Md5 at end of file?
Will redownload and try again.
Norm883
Download link will only work on right click Save as.
file downloads 202megs
DJ05.tar.tar = 202mb
Ran Odin tried to install using PDA.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> ‹
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How long did it take to complete?
took me about 5 minutes to download, i think theres something wrong with the hosted file. because when you save it it doesnt tell you the size the of the file either.. it just downloads and completes at 202mb/windows reports it at 212mb i still havent had it install correctly. and i had to go back to the DI01 cause i did get the phone to PC icon after the unsuccessful flash.
I downloaded the file and it completed at 341MB. Looking at the files I had for DI01 (not the full package, 4 different files) that looks to be about correct as total those files add up to ~330MB.
im not sure what my issue is then. ive redownloaded it 4 times on my laptop, tried twice on my desktop and one more time on the gf's laptop. and they all stop at the 202mb file.
Sorry!
Hey guys.
I see that you guys are having issues with downloading it. I'll try and upload it somewhere else as soon as possible.
Sorry for the inconvenience!
No worries man thanks!!
do i have to re root after this
Yes you have to reroot. This is unrooted DJ05.
Sent from my SCH-I500 using XDA App
What are the advantages of flashing this package?
So that if you mess up and need to odin to restore everything, you don't have to odin DI01 and then reodin the DJ05 modem. it's DJ05 all in one. all you have to do is flash a recovery clean rom and kernel of choice.
hey, is this rooted?
lol. sorry. i couldnt resist.
i will give it a try and post how she runs.
thanks.
it runs pretty well, for stock. i beleive it does run better than di01, which is to be expected. but im getting rid of it, i cant stand stock! but a very useful tool, concidering the number of times i brick my phone in a week.
thank you.
I just flashed. Everything worked just fine but I lost haptic feedback. Is that normal?
jdimase821 said:
I just flashed. Everything worked just fine but I lost haptic feedback. Is that normal?
Click to expand...
Click to collapse
You shouldn't have lost haptic. It uses a DJ05 kernel. Try flashing stock DI01 and see if you get it back
Sent from my SCH-I500 using XDA App
So what exactly is "stock", stock TouchWiz, as in, just like the phone we bought, but with the DJ05 improvements?
Sent from my SCH-I500 using XDA App
Follow up to my last question. I want DJ05 and the ability to receive any OTA's w/o having to reset everything. Is this possible? Note: I do have DJ05 from the IRC, clean version if I recall.
Sent from my SCH-I500 using XDA App
Related
Hello,
I am stuck with a "Phone Symbol..Yellow Triangle with a "!" in the middle..Computer Symbol". Is this a "Hardware Lock" and if so, how do I get out of it. I am able to boot into CWM Red and CWM Green and have tried just about everything to no avail. Any help would be greatly appreciated. Thanks.
You are going to have use Odin to restore because it means the firmware is screwed up.
---------
running on Eb01 voodoo!
get adrynalyns di01 package and flash it with odin, that gets you back to stock, always works for me. If you can at least get the phone into cw your probably still ok.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
ziggy484 said:
get adrynalyns di01 package and flash it with odin, that gets you back to stock, always works for me. If you can at least get the phone into cw your probably still ok.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
Remember odin with pda not with phone.. or you will have a nice paper weight
Rocking dj05 and jt's voodoo 5
ziggy484 said:
get adrynalyns di01 package and flash it with odin, that gets you back to stock, always works for me. If you can at least get the phone into cw your probably still ok.
Sent from my stock 2.1
unrooted, fully bloated (for now) Fascinate
Click to expand...
Click to collapse
Thanks for the reply. That's just it though, I am unable to boot into Download Mode to be able to use Odin. Could it be CWM? No matter what I do it is showing CWM 2.5.1.0. Don't know what to do at this point. Perhaps pull the microSD card, stick it in the computer and put the Stock DI01 file on it and then place it back in to the phone? Please advise.
Have you tried taking the battery out method to get into download mode?
This happened to me, however I pulled the battery, got into clockwork using the 3 buttons. I then reflashed stock eb01 w kernel without wiping, assuming it was ok.bc I already had before the ! Screen. I was back in action in no time
Sent from my SCH-I500 using XDA App
Um, actually, that worked. Got into Download mode and am attempting to go back to stock now. Thanks so much...not actually sure how I did it...just pulled the Battery while the phone was connected to the computer and did the Volumne Down and Power Button thing, I think.
LJackson10 said:
Um, actually, that worked. Got into Download mode and am attempting to go back to stock now. Thanks so much...not actually sure how I did it...just pulled the Battery while the phone was connected to the computer and did the Volumne Down and Power Button thing, I think.
Click to expand...
Click to collapse
and that's how it's done
So, downloaded the stock file, pulled the battery while plugged into the computer, pressed Volume Down and Power Button to get into Download Mode, did Odin and I'm back. These forums are great! Thanks for all your help.
Same thing happened to me with a messed up eb01 radio update. Just booted into download mode and relflashed my working dj05 radio and booted. Then redid the eb01 radio.
Sent from my SCH-I500 using XDA App
Having the same issue.
I have the di01 package and flash it with odin I do not have anything on the actual phone as far as being rooted etc. I was Trying to root it and it came up with the symbols after going no where, so It was suggested that I try to reinstall the original filmware. I am getting no where. Any suggestions?
I tried doing this and I got
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
It went no where for over 20 minutes no progress bars etc. Not sure what to do.
I still have no idea what to do if anyone can help me. Been checking all night to see if anyone might know what to do.
Faythy said:
I still have no idea what to do if anyone can help me. Been checking all night to see if anyone might know what to do.
Click to expand...
Click to collapse
did you follow odin's driver instructions?
So many of us are rooted...so many...
Getting to ED01 isn't easy without any radio leak. So, to get to ED01, so you can get yer bran' spankin' new modem!, follow these directions.
First, we will downgrade to DL09.
Do this by flashing this DL09 package in Odin (pda button, pda button, pda button)
http://adrynalyne.us/files/stuff/
Then, download this EA28 update.zip, put it on your sd card, reboot to recovery and flash:
http://www.multiupload.com/F00OYXVO0K
Finally, download this ED01 update.zip put it on your sdcard, and reboot to recovery and flash:
http://www.multiupload.com/LPI21AP8TD
Then, flash whatever the latest and great cwr 2.5.x is (I've not kept track.) Do not use cwr 3.x for now, imo. You can then flash one of the stock rooted roms, or root yourself via flashing a super user package from cwr.
Good luck!
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
Boot first to CWR after Odin, and install one of the above.
Thank you sir, much appreciated.
Are the ed01 and the leaked radio so different that it is worth the process?
Sent from my SCH-I500 using XDA App
Any difference
Sent from my SCH-I500 using XDA Premium App
There must be a small difference. How can one go about extracting the radio?
Sent from my SCH-I500 using Tapatalk
Is the EA28.zip supposed to be 203KB?
ataranine said:
Is the EA28.zip supposed to be 203KB?
Click to expand...
Click to collapse
Unzipping it and checking it appears that it is supposed to be only 203kb. Should be good to go.
Thank you! Everything works!
Well I did all I was supposed to do and I can't root my phone using the Oneclick root..
Any other ways?
In the his post it says there is no radio and that it is most likely the same as ec01. I'm contemplating doing it too.
Sent from my SCH-I500 using XDA Premium App
ataranine said:
Well I did all I was supposed to do and I can't root my phone using the Oneclick root..
Any other ways?
Click to expand...
Click to collapse
If you can't read the post, I am not surprised.
Sent from my ADR6400L using XDA App
Are there any mirrors for the DL09 package? Won't seem to download for me, always stops after a random but small amount - 8 megs, 19 megs, etc.
ED01 Mirror: http://filevo.com/pvoy6q2ou8uy.html
adrynalyne said:
If you can't read the post, I am not surprised.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I guess there was a need to be a **** about it, especially after the problem was solved. Thanks for the OP bud. Love your work, by the way.
Nobody has answered the question. Is EC01 the same as ED01? I don't want to waste the time in putting this update.zip in if it will not improve any.
Then, flash whatever the latest and great cwr 2.5.x is (I've not kept track.) Do not use cwr 3.x for now, imo.
Click to expand...
Click to collapse
Anyone have a link for where to find the latest CWR 2.5.X? Thanks!
alwaysthere said:
Anyone have a link for where to find the latest CWR 2.5.X? Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1017817
http://forum.xda-developers.com/showthread.php?t=942021
odin fail
i downloaded all the files and put the phone into download mode then i started odin and it failed after
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> Enter CS for MD5..
<ID:0/011> Check MD5.. Do not unplug the cable..
<ID:0/011> Please wait..
<ID:0/011> Checking MD5 finished Sucessfully..
<ID:0/011> Leave CS..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
then after mins of waiting it fails
please help
Thanks a million!!!!
Im having the worst luck with this. After I flash dl09 i reboot.. then try and flash update.zip for e28 and get assert failed etc etc then error in /sdcard/update.zip (status 7)
First off, I apologize if this is a duplicate post. I really and truly searched and found no posts with the same issue that I am having.
I started by rooting my Fascinate a few months ago with the intention of flashing 2.2 on it. Well, I never did. Now, the OTA update fails every time. So, I try to go back to stock by following the instructions here:
http://www.addictivetips.com/mobile...axy-s-gt-i9000-to-android-2-2-froyo-download/
Well, everything seemed to go fine, Odin passed and so on. I only follow the instructions to return to stock 2.1. I figured the OTA update for 2.2 would be fine from there. And if not, I would continue with flashing a custom ROM. Well, when I tried to reboot the phone I get a black screen with white letters that read "GALAXY S" across the top, GT-I9000 uder that and "SAMSUNG" at the bottom.
I have tried following through all of the steps at the above link and get the same results. I have tried flashing EB01DB_DXC and I just get a blank screen. I can still get in to download mode so I don't think this is a complete loss. I am running out of things to try.
Thanks for your help.
Well, you've just odined whole another world to your phone.
Fascinate is not i9000. i9000 is international version.
You can odin back to DI01.
Sent from my SCH-I500 using XDA Premium App
If you have links to download this \ I would appreciate them. Also, do I just need to flash this in the PDA part of Odin? Do I need to repartition? If someone could review the instructions in the link I provided and give me step by step instructions I would appreciate it. Also, as long as I am up to my elbows in this phone I think I may as well customize it. Any stable 2.2 ROMs you can recommend?
A Newman said:
If you have links to download this \ I would appreciate them. Also, do I just need to flash this in the PDA part of Odin? Do I need to repartition? If someone could review the instructions in the link I provided and give me step by step instructions I would appreciate it. Also, as long as I am up to my elbows in this phone I think I may as well customize it. Any stable 2.2 ROMs you can recommend?
Click to expand...
Click to collapse
Search the site...the links are at the top of development. If you cant help yourself, no one can help you.
islandtime said:
Search the site...the links are at the top of development. If you cant help yourself, no one can help you.
Click to expand...
Click to collapse
+1. But since you look new to here, let me helo you out a bit. Google "di01 full xda" and "atlas pit" download both of them. Now to fun part. Put di01 tar file in PDA(NEVER in phone) and put Atlas in Pit. Then flash it. Onc ev you are done, update to latest ED03 just for radio via OTA. Then you can root w/ SuperOneClick 1.9.1 > Flash CWM 3.0 by times infinity > flash romnkernel of your choice. (before flashing any rom, it is recommended to wipe data/dalvik/cache and just wipe dalvik/cache for kernel).
Sent from my SCH-I500 using XDA Premium App
Link: DI01 Full Package
Here
Atlas Pit
Here
SuperOneClick Root
Here
CWM 3.0
Here
or just look at my "how to return to stock" thread that is stickied in this very same Q&A section.
A Newman said:
If you have links to download this \ I would appreciate them. Also, do I just need to flash this in the PDA part of Odin? Do I need to repartition? If someone could review the instructions in the link I provided and give me step by step instructions I would appreciate it. Also, as long as I am up to my elbows in this phone I think I may as well customize it. Any stable 2.2 ROMs you can recommend?
Click to expand...
Click to collapse
If you haven't found it already, I would say the "Unbrick your phone..." post by DaleV is tailor-made for your situation . Go fully-back to stock DI01 including the atlas pit file.
Good luck with it.
Thank you for all of the replies and patience. I will have a chance to work with this today and let you all know how it turns out.
xHoLyx said:
+1. But since you look new to here, let me helo you out a bit. Google "di01 full xda" and "atlas pit" download both of them. Now to fun part. Put di01 tar file in PDA(NEVER in phone) and put Atlas in Pit. Then flash it. Onc ev you are done, update to latest ED03 just for radio via OTA. Then you can root w/ SuperOneClick 1.9.1 > Flash CWM 3.0 by times infinity > flash romnkernel of your choice. (before flashing any rom, it is recommended to wipe data/dalvik/cache and just wipe dalvik/cache for kernel).
Sent from my SCH-I500 using XDA Premium App
Link: DI01 Full Package
Here
Atlas Pit
Here
SuperOneClick Root
Here
CWM 3.0
Here
Click to expand...
Click to collapse
Well, I tried the first step (flashing the Atlas pit and the DI01)three times this morning and I get a "Fail" in Odin every time. I tried multiple USB ports with the same results. Here is a copy and paste of the Message box in Odin:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> movinand.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't use DI01
Use the DL09 tar from here:
http://adrynalyne.us/files/stuff/
Use the atlas_v2.2.pit you downloaded earlier.
Make sure you have repartition checked.
Put tar in pda box, pit in pit box, connect phone in download mode, click start, cross fingers.
Sent from my SCH-I500 using XDA App
Thanks, times_infinity. This got me to the recovery screen. But, I can go no further. I have the update.zip file on the SD card, but I cannot apply it:
E:failed to open /sdcard/update.zip (No such file or directory)
E:signature verification failed
If I try to reboot I get the white "Samsung" and then right back to "blue" Android system recovery <2e> screen. I tried following the walk through here:
http://forum.xda-developers.com/showthread.php?t=948722
I flashed the cwm-recovery-ALL.zip and got another version installed, but I got the same results.
A Newman said:
Thanks, times_infinity. This got me to the recovery screen. But, I can go no further. I have the update.zip file on the SD card, but I cannot apply it:
E:failed to open /sdcard/update.zip (No such file or directory)
E:signature verification failed
If I try to reboot I get the white "Samsung" and then right back to "blue" Android system recovery <2e> screen. I tried following the walk through here:
http://forum.xda-developers.com/showthread.php?t=948722
I flashed the cwm-recovery-ALL.zip and got another version installed, but I got the same results.
Click to expand...
Click to collapse
So what you're going to want to do is get up to ED03 via OTA. After that, boot into download mode and flash this
http://dl.dropbox.com/u/36791/CWM3_Voodoo.tar.md5
with odin.
Immediately after it completes, boot into recovery with the three button method, and then flash comm rom 1.3
If you don't flash a new kernel, the stock one will overwrite recovery giving you back the blue Samsung 2e recovery.
I am not sure how I can get EDO3 version OTA when the phone won't boot. Can I flash it with Odin? At this point I would just like to get the phone working, but Super clean looks good.
I tried formatting the SD card and putting only the update.zip file on the card, but I still can't apply sdcard:update.zip when I get to recovery. When I flash the "red" clockwork and select the menu options by pressing the home button I get a black screen. If I press the home screen again it brings me back to the menu. I have tried all of the options and the same thing happens. I have followed the directions on this thread:
http://forum.xda-developers.com/showthread.php?t=1053567
But, I get stuck on step 11, because I can't get it to apply sdcard:update.zip.
You don't need to mess with update.zip. The instructions you're following will work, but it's a bit dated...
Like I said before, follow the "unbrick your phone..." thread op. Like times_infinity suggested, you could flash dl09 instead of di01, but it doesn't really matter since either will get overwritten by the ota update after your first boot...
Likewise, the ota process(es) will put an update.zip in place and use it to get you to ed03 .
You can do it, man, I know you can!
Sent from my SCH-I500 using XDA Premium App
bmeek said:
You don't need to mess with update.zip. The instructions you're following will work, but it's a bit dated...
Like I said before, follow the "unbrick your phone..." thread op. Like times_infinity suggested, you could flash dl09 instead of di01, but it doesn't really matter since either will get overwritten by the ota update after your first boot...
Likewise, the ota process(es) will put an update.zip in place and use it to get you to ed03 .
You can do it, man, I know you can!
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
I should mention that I transferred my service to another phone, since this one is out of commision. I won't be able to get OTA updates?
A Newman said:
I should mention that I transferred my service to another phone, since this one is out of commision. I won't be able to get OTA updates?
Click to expand...
Click to collapse
Well if that's the case, then just follow this.
http://forum.xda-developers.com/showthread.php?t=1044474
make sure you're complete stock DL09 including stock recovery. make your way up to ED01 with the files provided there, and then flash CWM with ODIN and then flash rom of choice from recovery.
I made it all the way through and thought I was home free, but after installing super clean the phone reboots to recovery. In fact, it always boots to recovery. Either stock recovery or the ROM that I flash. I have not been able to reboot the phone since I started this.
Was stuck on dl01 with voodoo, bloatware frozen, rooted, and using launcherpro.
I followed the first link in that sticky: http://forum.xda-developers.com/showthread.php?t=908451
and now my phone wont boot up. when I turn it on I see the samsung logo and then it goes through this:
--Wiping data--
Formatting FOTA...
Formatting DATA...
Data Wipe failed.
Formatting Cache
Formatting DBDATA
Wipe_Data Failed.
Click to expand...
Click to collapse
then it will go back to the samsung logo and go around in circles again.
everything went fine with odin. This is what the little message window said:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> Enter CS for MD5..
<ID:0/005> Check MD5.. Do not unplug the cable..
<ID:0/005> Please wait..
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Removed!!
<ID:0/005> Checking MD5 finished Sucessfully..
<ID:0/005> Leave CS..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> factoryfs.rfs
<ID:0/005> modem.bin
<ID:0/005> recovery.bin
<ID:0/005> zImage
<ID:0/005> Removed!!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I have no idea what went wrong but now i have no phone and this sux big time.
Dont panic this has happened to me.
Try this link:
http://forum.xda-developers.com/showthread.php?t=1026746
And use the method in SECTION 2: HEIMDALL
Rockstar52 said:
Dont panic this has happened to me.
Try this link:
http://forum.xda-developers.com/showthread.php?t=1026746
And use the method in SECTION 2: HEIMDALL
Click to expand...
Click to collapse
will take a look at that in a minute thanx.
but what the hell went wrong? was it something to do with voodoo?? none of the steps said to disable it or anything....
Yes you must disable VooDo before you do anything. Voodo is a real pain if your a new to flashing.
Rockstar52 said:
Yes you must disable VooDo before you do anything. Voodo is a real pain if your a new to flashing.
Click to expand...
Click to collapse
okay this tutorial is not working. I went strait to heimdall step two and I get two problems.
1) in step 3 it says "Now drop the usb drop down box and you will find an option for SAMSUNG android composite ADB device, or Samsung composite usb driver..."
I dont get that, I get "unknown device" My computer is 6 years old and i have always had problems with the usb recognizing my fascinate. It always says some type of problem and when i troubleshoot it says no drivers are installed even though i have installed them.
2)when I select the unknown device and hit install drivers i get installing drivers failed.
If you can get odin to work again use atlas_v2.2.pit to format back to rfs file-system. Use the PIT button in odin.
fupamobile said:
okay this tutorial is not working. I went strait to heimdall step two and I get two problems.
1) in step 3 it says "Now drop the usb drop down box and you will find an option for SAMSUNG android composite ADB device, or Samsung composite usb driver..."
I dont get that, I get "unknown device" My computer is 6 years old and i have always had problems with the usb recognizing my fascinate. It always says some type of problem and when i troubleshoot it says no drivers are installed even though i have installed them.
2)when I select the unknown device and hit install drivers i get installing drivers failed.
Click to expand...
Click to collapse
Definitely try to Odin the Pit 2.2 that DMT suggested.
Here's a link to a giude that should help get you back to stock as it isn't as intimidating for some as the un-bricking one: http://forum.xda-developers.com/showthread.php?t=1124391
And if that fails might I suggest trying it on a more up to date PC, maybe your issues have come from that if your pc never recognized the phone properly.
Nnneeeedd heellp nowwww!!!!!!!!!!
Go to the development stickies and go to the 2 one...how to go from
Cm7 to anything else...that's not the official title but it its something like that. The links for the eb01. tar, the atlas 2.2pit and newer odin versions are all in the first post.
I use odin 1.7..which version are you on? I'm sure if you use odin 1.7 or newer and put the 2.2 atlas pit file in the pit section with repartition checked and put the official vzw eb01 .tar in the pda section and run it..that will get your phone back in stock unrooted bloated form but at least your phone will work and then you can go and flash what you like..but I would try a different odin version and the eb01 with the pit file and you will get your phone back
Sent from my SCH-I500 using XDA App
Are you willing to just go back to stock or start all over again?
Put the phone in Download mode
Remove battery
plug usb into PC
plug usb into phone [battery still out]
push [and hold] volume button down
Should see yellow triangle [once you see this you can let go off the volume]
Use Odin then to flash the Stock image to your phone.
Link to ODIN v1.3 http://www.mediafire.com/download.php?r5izui8a3trpo85
Download the ED01 stock rom
Put it into the PDA section of Odin and flash and Boom Back to stock!
Stock ED01 http://www.multiupload.com/6ET46L1ATD
Nothing will be deleted off of your sd card
xwhofarted said:
Are you willing to just go back to stock or start all over again?
Put the phone in Download mode
Remove battery
plug usb into PC
plug usb into phone [battery still out]
push [and hold] volume button down
Should see yellow triangle [once you see this you can let go off the volume]
Use Odin then to flash the Stock image to your phone.
Link to ODIN v1.3 http://www.mediafire.com/download.php?r5izui8a3trpo85
Download the ED01 stock rom
Put it into the PDA section of Odin and flash and Boom Back to stock!
Stock ED01 http://www.multiupload.com/6ET46L1ATD
Nothing will be deleted off of your sd card
Click to expand...
Click to collapse
Well I got the drivers installed and i was on to step 5 but heimdall.exe wont open.
I think I will just do it this way i guess. this is all because of stupid voodoo
Voodoo used to be a p.i.t.a but it really isn't that hard now with the newer cwm supporting both voodoo and non voodoo, the steps myself and the person who posted above me are describing direction for odin..not heimdall.I don't know much about heimdall or how to use it but you can get your phone back and working using odin
Use the link in junkboy0's reply..follow the directions in the first post.
fupamobile said:
Well I got the drivers installed and i was on to step 5 but heimdall.exe wont open.
I think I will just do it this way i guess. this is all because of stupid voodoo
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
efan450 said:
Go to the development stickies and go to the 2 one...how to go from
Cm7 to anything else...that's not the official title but it its something like that. The links for the eb01. tar, the atlas 2.2pit and newer odin versions are all in the first post.
I use odin 1.7..which version are you on? I'm sure if you use odin 1.7 or newer and put the 2.2 atlas pit file in the pit section with repartition checked and put the official vzw eb01 .tar in the pda section and run it..that will get your phone back in stock unrooted bloated form but at least your phone will work and then you can go and flash what you like..but I would try a different odin version and the eb01 with the pit file and you will get your phone back
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
what should i do about voodoo though?
i am going to do this as two of you have suggested:http://forum.xda-developers.com/showthread.php?t=1124391
but i dunno about voodoo. just ignore it for now? It addresses it in that post but i dont undestand what it is saying
using Odin and the stock image it will over write the voodoo
I have never used the heimdall way. I have been stuck in boot loops many times and ODIN has always saved the day!
As long as you can get to Download mode your phone can be fixed
fupamobile said:
what should i do about voodoo though?
i am going to do this as two of you have suggested:http://forum.xda-developers.com/showthread.php?t=1124391
but i dunno about voodoo. just ignore it for now? It addresses it in that post but i dont undestand what it is saying
Click to expand...
Click to collapse
Yup ignore voodoo for now...when you use the atlas2.2 file in the pit section and the eb01.tar in the pda section...if repartition isn't checked make sure you check it...run it and it will bring you to stock with voodoo removed and then you can flash whatever you wanted from there...if you get stuck,p.m.me and I'll send you files with complete directions but it would have to wait till I get home from work tonight..don't panic we'll get you up and running again!
Get the newest odin, eb01. tar, and atlas 2.2pit file, and I would grab
One of the newer recovery.tar files too so when your back to stock you can flash a working recovery if you want to flash some rom after all is fixed....i recommend the 3-30 fix all recovery, but just make sure you get a tar file so you can odin it after your phone is fixed.
Sent from my SCH-I500 using XDA App
xwhofarted said:
using Odin and the stock image it will over write the voodoo
I have never used the heimdall way. I have been stuck in boot loops many times and ODIN has always saved the day!
As long as you can get to Download mode your phone can be fixed
Click to expand...
Click to collapse
interesting.
in the q/a section there is a sticky on how to go stock. not only does it not tell me how to address voodoo(why i am here) but it tells me to go to DL09 and them OTA to eb01.
the method you guys are posting seems much more logical. it sends me strait to froyo and doesnt brick my phone because it just overwrites voodoo. correct?
once voodoo is "overwritten", is it gone off my phone? if not, should i address it at all after this tutorial? froyo is downloading right now
xwhofarted said:
using Odin and the stock image it will over write the voodoo
I have never used the heimdall way. I have been stuck in boot loops many times and ODIN has always saved the day!
As long as you can get to Download mode your phone can be fixed
Click to expand...
Click to collapse
I concur...soft bricked, boot looped, many many times and never used heimdall either
Sent from my SCH-I500 using XDA App
fupamobile said:
interesting.
in the q/a section there is a sticky on how to go stock. not only does it not tell me how to address voodoo(why i am here) but it tells me to go to DL09 and them OTA to eb01.
the method you guys are posting seems much more logical. it sends me strait to froyo and doesnt brick my phone because it just overwrites voodoo. correct?
once voodoo is "overwritten", is it gone off my phone? if not, should i address it at all after this tutorial? froyo is downloading right now
Click to expand...
Click to collapse
Correct voodoo will be gone but you can just flash another voodoo kernel later and you can flash voodoo over voodoo just not voodoo to non voodoo with out removing it
Sent from my SCH-I500 using XDA App
efan450 said:
Yup ignore voodoo for now...when you use the atlas2.2 file in the pit section and the eb01.tar in the pda section...if repartition isn't checked make sure you check it...run it and it will bring you to stock with voodoo removed and then you can flash whatever you wanted from there...if you get stuck,p.m.me and I'll send you files with complete directions but it would have to wait till I get home from work tonight..don't panic we'll get you up and running again!
Get the newest odin, eb01. tar, and atlas 2.2pit file, and I would grab
One of the newer recovery.tar files too so when your back to stock you can flash a working recovery if you want to flash some rom after all is fixed....i recommend the 3-30 fix all recovery, but just make sure you get a tar file so you can odin it after your phone is fixed.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
okay. I am just following what that tutorial says to do. I dont even know what a working recovery is. I never even had a rom on this thing. I have realized I am in way over my head here and have spent too much time dealing with my phone.
really all i want is to be up to date, have root, debinged/bloat, launcherpro so i dont have to use stupid touchwiz. thats basically all i need. maybe in the future i might get other stuff. but for now i think it will suit me best to just rely on verizon/samsung to keep my phone up to date and then just re root everytime. seems much simpler and safer
fupamobile said:
okay. I am just following what that tutorial says to do. I dont even know what a working recovery is. I never even had a rom on this thing. I have realized I am in way over my head here and have spent too much time dealing with my phone.
really all i want is to be up to date, have root, debinged/bloat, launcherpro so i dont have to use stupid touchwiz. thats basically all i need. maybe in the future i might get other stuff. but for now i think it will suit me best to just rely on verizon/samsung to keep my phone up to date and then just re root everytime. seems much simpler and safer
Click to expand...
Click to collapse
Recovery..clock work mod...or cwm is the recovery program you will use to install custom rom, kernels, or zip files...I will send you a p.m.later with files, info, and instructions and you can read over it and decide if you want to do it now or wait till you're a lil more familiar with the process..but for now odin the pit atlas 2.2 file and eb01 and you will be stock and be able to use launcher pro.
Sent from my SCH-I500 using XDA App
i was following steps to install google now in this thread
http://forum.xda-developers.com/showthread.php?t=1749045
when i came to step of changing value the file wouldnt save my change so i gave extra(besides read and write i also checked execute and special) permission of build.prop file in system folder.
i restarted my phone after that and now phone shuts down after galaxy boot logo.
i tried following this thread
http://forum.xda-developers.com/showthread.php?t=1737855
i can get to download mode, but when i get to step of installing stock rom through odin it isnt working
i get error in odin:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
main line i messed up permission of build.prop how to can i replace it from odin?
thanks
please dont tell me my 500 bucks drain down the toilet. :crying:
Can you enter download mode?
If so, try restoring your phone with the factory Rom using odin
Sent from my SPH-L710 using Tapatalk 2
If you can't get into download mode you are screwed! Sorry
But if you can you should be able to flash stock through Odin.
Sent from my SGH-T999 using xda premium
yes i can get to download mode but i cant install stock rom.
thats what the t-mobile thread was asking to do. i can install stock kernel but not rom.
Why were you trying to install google now, when they said in the thread that it was only for ASOP Roms (CM9 or AOKP) anyway? Maybe try to push via adb if someone has a copy for you model if possible.
crystalstylez said:
Why were you trying to install google now, when they said in the thread that it was only for ASOP Roms (CM9 or AOKP) anyway? Maybe try to push via adb if someone has a copy for you model if possible.
Click to expand...
Click to collapse
can you please tell me how it is done or link me some thread you would recommend?
thanks
Good luck. This is ugly. I still have not rooted my device because besides working great as is, I am not comfortable hacking it. I know if I mess it up it is my fault and the thought of ruining it and cost I paid is making me cautious. I may hack it down the line. But for now, I'm going to enjoy it as is.
Hopefully, you get it restarted somehow.
omar300 said:
i was following steps to install google now in this thread
http://forum.xda-developers.com/showthread.php?t=1749045
when i came to step of changing value the file wouldnt save my change so i gave extra(besides read and write i also checked execute and special) permission of build.prop file in system folder.
i restarted my phone after that and now phone shuts down after galaxy boot logo.
i tried following this thread
http://forum.xda-developers.com/showthread.php?t=1737855
i can get to download mode, but when i get to step of installing stock rom through odin it isnt working
i get error in odin:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
main line i messed up permission of build.prop how to can i replace it from odin?
thanks
please dont tell me my 500 bucks drain down the toilet. :crying:
Click to expand...
Click to collapse
I'm guessing u installed all the right drivers if Odin sees your phone right? Are u using the most updated version of Odin made for our phones? U try download the rom agn? Maybe bad download, if yes try download a different version of rom, maybe the rooted one or if that's the one u used download the factory one, u try different computer? Reboot computer? , pull battery from phone for few min, some of these things sound stupid and pointless but take it from a guy with 7 samsungs its almost impossible to brick a Samsung
yea i got all the drivers and download correctly working. its weird cus it can install kernal and not rom, oh and im trying to install stock rom. only stock rom for t mobile comes in .tar type all other are made for cmw .zip format. im sure it can be unbricked but it will take some developer to get that done. i found this thread where alot of people messed up on same thing so hoping there will be solution soon. http://forum.xda-developers.com/showthread.php?p=28531684#post28531684
omar300 said:
yea i got all the drivers and download correctly working. its weird cus it can install kernal and not rom, oh and im trying to install stock rom. only stock rom for t mobile comes in .tar type all other are made for cmw .zip format. im sure it can be unbricked but it will take some developer to get that done. i found this thread where alot of people messed up on same thing so hoping there will be solution soon. http://forum.xda-developers.com/showthread.php?p=28531684#post28531684
Click to expand...
Click to collapse
What about the tool kit? U can install rooted rom from there while in Odin no? Try the 3.06 version of Odin? I.mean **** what u have to lose at this point . I'd still redownload the file if was me even if waste of time . I have a at&t version and we have 100% stock Odin and a rooted Odin ..
U said u can install the kernel?? Can u get into cwr with correct kernel? Probably dumb question but I asked anyway
Rooting is of no real risk for ATT at least.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
drawde40599 said:
What about the tool kit? U can install rooted rom from there while in Odin no? Try the 3.06 version of Odin? I.mean **** what u have to lose at this point . I'd still redownload the file if was me even if waste of time . I have a at&t version and we have 100% stock Odin and a rooted Odin ..
U said u can install the kernel?? Can u get into cwr with correct kernel? Probably dumb question but I asked anyway
Click to expand...
Click to collapse
I reinstalled the cwr and went in it and advance restored the system and it worked!