After thousands words, hundreds attempts I'm giving up and bringing up this discussion on this forum..I really hope your experience and deep knowledge of subject finally will help me..I live overseas and use to order HTC HD2 T-mobile for my friends and some times just for sale..It was my 7-th T-mobile HTC HD2 when I got problem with flashing custom ROM...I installed HSPL 2.08 and started to flash my usual custom ROM via USB for T-mobile 1024,I took out sim card and memory stick before flashing..When I finished I did a soft reset and got frozen STICK TOGETHER screen...Phone just stuck...Forgot to say that before flashing I format device with Task 29..So I format it again and flash one more time,process itself was successful , but again I got STICK TOGETHER and that's it...I decided to flash another radio, CORRECT one (50) special fot T-mobile 1024, after several updates error phone just died..I got a brick, I couldn't even go to bootloader mode..I reanimate device with JTAG, and tried almost all official ROMs, I flashed them via usb, using memory card..Sometimes during flashing it stopes and I have to reboot, sometimes i got a sign on screen that update is completed, but when I turn device on nothing happened..I tried MTTY method, didn't help...I don't really know what to do now..May be I missed something important but as I said I'm not a noob already, and have red tonnes of information regarding flashing ROMS... Any ideas would be highly appreciated, i still hope that is just software problem not hardware, otherwise I can just throw it away...thanks for reading this story
cementer said:
After thousands words, hundreds attempts I'm giving up and bringing up this discussion on this forum..I really hope your experience and deep knowledge of subject finally will help me..I live overseas and use to order HTC HD2 T-mobile for my friends and some times just for sale..It was my 7-th T-mobile HTC HD2 when I got problem with flashing custom ROM...I installed HSPL 2.08 and started to flash my usual custom ROM via USB for T-mobile 1024,I took out sim card and memory stick before flashing..When I finished I did a soft reset and got frozen STICK TOGETHER screen...Phone just stuck...Forgot to say that before flashing I format device with Task 29..So I format it again and flash one more time,process itself was successful , but again I got STICK TOGETHER and that's it...I decided to flash another radio, CORRECT one (50) special fot T-mobile 1024, after several updates error phone just died..I got a brick, I couldn't even go to bootloader mode..I reanimate device with JTAG, and tried almost all official ROMs, I flashed them via usb, using memory card..Sometimes during flashing it stopes and I have to reboot, sometimes i got a sign on screen that update is completed, but when I turn device on nothing happened..I tried MTTY method, didn't help...I don't really know what to do now..May be I missed something important but as I said I'm not a noob already, and have red tonnes of information regarding flashing ROMS... Any ideas would be highly appreciated, i still hope that is just software problem not hardware, otherwise I can just throw it away...thanks for reading this story
Click to expand...
Click to collapse
sorry for "stupid" answer,but...have you flash radio FIRST and rom than??I know,you're not a noob,but sometimes things more 'simple and obvious **** you
I had similar issues, it turned out to be a haware problem. HTC replaced the main board in the phone.
sorry to hear that
Just a 杯具
Yeah, you either need a new motherboard or use JTAG to reflash the bootloader..
Read here
geppo1975 said:
sorry for "stupid" answer,but...have you flash radio FIRST and rom than??I know,you're not a noob,but sometimes things more 'simple and obvious **** you
Click to expand...
Click to collapse
I flash ROM first and after i got problems with booting tried to resolve with flashing radio...anyway I guess it is hardware problems...It's vibrating time to time i go to boot loader mode,however it is ok when I reinstall HSPL, I still can see WE hacked it ...tofay I flashed an Ebergy ROM and it said that update was successful, but again when I turn device on I stuck on STICK TOGETHER ..Damn it,I'll try to flash radio, because I haven't had a success with it..By the way what abo0ut goldcard method, I don't really know what is it and how it can help..thanks
Related
Obviously I'm a n00b I just got my 8525 yesterday, right away I upgraded to WM6 went all day today with it working fine, I installed a PockMSN and Windows Live anyways to keep it short I FIGURED I WOULD just RE-INSTALL Windows Mobile 6 to get a fresh phone (didnt know hard reset did the same) Actually it was the 3rd time I flashed the OS and RE-UPGRADED to WM6 to get a fresh phone!!!!
~heres the trouble~
In the middle of the reinstalling WM6 I accidentally reset my computer, didnt realize it right away and, got ERROR 260 I believe, anyways I followed the directions, took out the battery and reset, plugged the USB back and RAN the Offical WM6 Rom of HTC site again and it keeps getting stuck EVERYTIME at 11%, I have tried it like 10 times and it gets stuck at 11%, and I get the same ERROR. Says Communication error 260. I have tried everything I know reset the computer, changed USB cords, and Nothing, everytime it gets stuck at 11%!!!!!!
Any Ideas about how to get my 2 day old Hermes back??
(I know i did a n00bish thing and I am sorry)
same place everytime!!
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
nicknowsky said:
I tried to reinstall Active Sync, changed USB cables, switched USB ports, nothing!! I keep getting ERROR 262 (thought it was 260 at 1st) and wont get past 11% says no connection. I do notice everytime i try this process, Active Sync isnt connected, but the Hermes is connected to the computer! Cause if it cant read the hermes it wouldnt be able to even start the update process. But 11% everytime its stops
Click to expand...
Click to collapse
Perhaps you could try to flash using the sdcard method. So you would not be connected to a pc anymore. Who knows, it could solve your problem. I know one case where installing an official rom cured also a similar problem.
Quick summary of the sdcard method:
Use an empty sdcard formatted in FAT32
Copy the RUU_Signed.nbh file containing the OS to the card and rename it: hermimg.nbh
Enter bootloader mode (OK + POWER + Softreset). Normally, after the 3colors screen, you will get "Loading" followed by a description of what is on the card.
When ready, press power and... wait...
Good luck (The phone is NOT connected to the pc)
sounds good but I dont have a MicroSD card reader to do that. And I am using an Offical HTC WM6 ROM, thats all I ever used was the offical WM6 Rom from the AT&T site. Like I said, I was able to install WM6 already, but me being a complete idiot was Flashing the upgrade ROM to get the Hermes back to fresh phone factory settings. But I accidentally reset the computer in the middle of Flshing and since then I have never been able to get it to install again, everytime I turn on the phone I am stuck at the Tri-Color Screen, I am able to restart the upgrade process, but it stops at 11% says ERROR 262 and no connectivity!!
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
nicknowsky said:
please anybody knows anything, this is the only thing I got, my mom got it for me! We cant afford to get a new one, or even fix it, it was a special present!
Click to expand...
Click to collapse
Ok. I am a bit annoyed if you cannot try the sdflash method (BTW you can ask somebody having a PC to prepare the card for you.)
There are different things you can flash on your hermes. Radio, OS, Splash screens, Extended Rom,.... The most tricky thing is the radio rom as a failure there has a higher probability to brick your pda.
This is why i believe it is very dangerous to flash right away without some readings and understanding about what you do. i hope you had some experience here.
Did you first install hardspl (olipro 2.10 )? This is not mandatory but is a very good protection against bricking. (here the excellent guide of mrvanx: http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27 )
Did you flash also a radio rom? (Was it included in the "package" you wanted to flash?) If yes, i am a bit anxious that a stop at 11% is a problem... BUT, if you flashed a radio rom, it goes very, very, very... slowly. And gives the feeling that it freezes. For the "radio" part it is normal . I hope you did not stop the process too soon.
Once again, try the sdcard method. Or try to flash an official rom (most of the time containing a radio part...) and be patient. Can take till 25 minutes.
If this does not work, do not panic yet. Others had also problems before you: go there and start reading : http://forum.xda-developers.com/showthread.php?t=286755 and here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
There is a hope to solve your problem. Good luck
Try to flash a radio ROM, turn the device on and if it stays at the bootloader screen (the tri colour screen) make a note of the version displayed. Hook up the device with USB cable, dont worry about activesync.
Download and unzip a radio ROM upgrade (try this one), run the exe, select your bootloader version on the screen....follow the screens through and see if it works.....radio roms take ages to flash so DO NOT disconnect your device.....if it doesnt work you most likely have a corrupted radio bootloader.............which is likely since the radio flash takes the longest ammount of time the reset probably occurred halfway through this.................unlucky
Give it a try though.
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
mrvanx said:
The lesson to learn here is to READ THRICE and flash once.....never ever disconnect your device out of impatience (which i suspect has happened many times on a radio flash) and be carefull these devices are expensive
Click to expand...
Click to collapse
I could not say better
I know, the MicroSD method is nice, but when I got the phone the guy gave me a MicroSD card, but not the regular SD card to read it on computers ( i do have a card reader) Guys a super appreciate the replies> I am gonna try everything rite now, but real quick is my Hermes FUCT??? or is this error fixable??? It is just losing communication everytime at the exact same place, it just seems like something is fixable, but my sorry luck i cant get over the hump!! I will let ya'll know ASAP
okay, here is the thing, Every Hermes ROM update utility I have downloaded wont work, i start it and the VERIFY INFO ON HERMS windows appears about 2 minutes late I get ERROR 260 and it exits! Now when I use the OFFICAL WM6 upgrade ROM from the ATT/HTC site it seems to read the HERMES and wanna start the upgrade process, but thats where it ends at 11% No other RUU I have used or tried has even gotten that far, I just get ERROR 260 before it starts and I have to exit.
What it looks like is I cant communicate with my HERMES at ALL!! Active Sync wont see, only when I reset my computer and reset the HERMES and I plug it in a different USB port, it says Installing New Hardware and HTC USB something and then Hardware has installed and is now ready to use. But Active Sync wont recogniZe it
I'm sorry to tell you that but i think you ****ed up your phone and it is as useless as my ****ing jasjam.
please give us some detailed info s about your hermes like IPL SPL GSM STATUS....
When I am in Tri Color Mode I see.......
HERM100
IPL-1.04
HERM100
SPL-2.03
and SERIAL at bottom, then USB when I plug it in to my computer
I had upgraded to WM6 before on it, but me being a impulsive FOOL, i flashed it again to get me back to Factory Setting (didnt know HARD RESET did the same) and I accidentally RESET my computer in the middle of ROM Upgrading and ever since I cant get past 11% when I try to do it again (using the OFFICAL WM6 ROM from HTC)
and I cant get any communication with mtty although I dont know much about that app, I get a CANT load screen appear
is your phone KITL enabled.
hold the COMM manager button + POWER button + OK button (the one on the left side under the jog wheel) and reset with stylus.
if you see KITL dialogue then it is KITL enabled (MY bricked jasjam is KITL disabled)
if it is KITL enabled then read : http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES and your phone will be just fine.
if it is not then your phone is ****ed up just like mine
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Hey dude!
Would you kindly provide me the sulotion.
I would appreciate it.
nicknowsky said:
HA HA, me and my phone guy (well the guy who I bought my Hermes from) HAVE FOUND A FIX to get the phone outta Bootloader Mode and back into OS!! in my case WM6!! I have to do it 1 more time to fully confirm the method!!!!!!!! My friend is calling "SHOCKING THE PHONE" but not really shocking anything!! I am reluctant to share the method, but this site needs more people to actually HELP out others
Click to expand...
Click to collapse
Mmm... do i understand correctly your post? Are you hesitating to help others because your method is risky, or because you express some exasperation about people on this site? In this case, do not forget that all people here are exchanging ideas, questions etc on a totally free base without any obligation. In the limits of there knowledge. Encountering a problem after flashing a device is the only responsability of the user. We just try to help. But i prefer to believe that you found a method, still risky, that you need still to test
That said, it seems that there are an increasing number of hermes encountering a problem with the radio part. It seems that stopping a flash at 11% is a symptom of that. See some consolidation of those problems here: http://forum.xda-developers.com/showthread.php?t=349461
I hope you will find a solution for your problem and moreover i hope that none of you bought a hermes second hand with an already radio part problem. If so try always to get your money back...
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
nicknowsky said:
I AM trying to confirm my method BEFORE i share it, because it might work on mine, and I dont wanna screw anyones hermes up more
Click to expand...
Click to collapse
Why don't you answer my PMs????
Please tell me your sulotion and let me try that if you have any
Hey, I just tried to install DCD's newest ROM and it looks as if i may of bricked my phone. When i connect it to my PC, Active Sync will not even pick it up. this happened right after i ran Hard-SPL-MFG to unlock the phone... I did try and run the titan_exitbl but no luck. I also attempted to run the relocker but i would not even run.. any ideas?
thanks!
recover from flash
Are you at the 3 color screen? If so you need to unplug the USB and replug it again as per the instructions. You MUST follow the instructions EXACTLY or your flashing will be very scary experience.
If you are not at the 3 color screen, you need to get back to the bootloader by pressing power+camera and soft reset. This will get you to the 3 color screen. Then have a look at the version of bootloader you have. If it doesnt say Olipro 1.20 or 2.40 you still have the locked bootloader and you can flash a stock carrier rom. If you have 2.40 you can flash to the 3.16+ rom and then flash the new radio this way or via sd card install which will be more painless and less scary.
If you dont know what an sd card flash is, I would search the forums here. Over at ppcgeeks you can look up imcokeman's posts and see instructions how to do a sd flash.
If you are are real noob, I would suggest staying with non gps roms at this stage because the change of radio rom needed to enable you to flash a gps rom will almost certainly lead to sleepless nights wondering if you have bricked your machine.
Most important thing to realise is that the machine is almost certainly not bricked. But you might have a few more scary moments before you get your machine back working again. You might also need to call your carriers service desk a number of times to get your provisioning data back working.
Check all the way through these two posts and dont sweat too much. With effort you will get your machine back. The answer to your problems is listed in one of these threads, but you need to dig a fair bit to find it. The posts contain lots of problems that people had flashing this rom, and I am sure your exact problem was there and solved. Its I believe somewhere in the second link I have listed here.
Good luck. i feel for you.
http://forum.xda-developers.com/showthread.php?t=371314
http://forum.xda-developers.com/showthread.php?t=362566 particularly this bit http://forum.xda-developers.com/showpost.php?p=1856032&postcount=216
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
optyhtp said:
thanks ill take a look, as a side note i am currently at the verizon logo, i can boot to the bootloader screen (red,green,blue) and when i connect the USB cord it does switch from Serial to USB on the screen... but gets stuck there. Active Sync shows no device connected.... I am running 2.40.Olipro
Thanks again
Click to expand...
Click to collapse
It doesn't need to active sync. Once it switches to USB you are ready to flash.
Stuck at Verizon Screen/HTC Mobilty Screen
If you are stuck at the VZW screen then you have only flashed one of the two essential parts. You need both (ROM and RADIO) to make it work. 3.16+ ROM will not work with the old radio. You need 3.27 radio.
Use the camera+power+soft reset and you can flash the one (new radio or new ROM) that you are missing.
See dcd's thread about the 2.3.2 rom. He has added a HUGE new disclaimer.
http://forum.xda-developers.com/showpost.php?p=1952956&postcount=1
Well nothing really worked so i used a sd card to flash back to the stock verizon ROM, i then attempted it again and got it all working!!!
I CANNOT believe this is a dead end . . as far as i have learnt from any "radio bricked" posts I have come across.
I am not a techie to start with but what could possibly be an unrecoverable damage unless the wrong radio flash impaired some hardware in the phone? This post, I hope, will also serve as an appeal to all the tech gurus out there saying "here's your nemesis . . radio brick"
I have an HD2 originally WWE ROM and then I decided to flash Dutty's after a radio (2.15) flash.
Then I was also able to run Android. Every thing was fine except for battery drain in Android so I said to myself "lets go back to winmo for a while".
aa aa . . not yet . .winmo was fine too except for some symptoms like sound failure, time sync failure, occasional hangs and so on which were fixed after a soft reset / restart.
Then .. one fine day (3 weeks from flash date) I woke up to a frozen phone. I tried restart/reset (soft and hard) nothing worked. I was always stuck in the white screen. I was still able to go to bootloader though.
Now the discovery of the nemesis. Tried the following proposed solutions
1. Flash Ship ROM from PC - The flashing would start and stay at 0% - ERROR 272 - Failed Connection - Recovery did not work either
2. Flash Ship Radio - Same error
3. SD card Flash ROM - Completed but the phone would go beyond the white screen
4. SD card flash Radio - Getting the infamous "Radio - Error" Update failed. Update terminated
5. Goldcard - Unfortunately I cannot even try it since the CID of the SD card can only be obtained via communication with my phone.
Now for the big question:
Whats going on???
Can I just wipe everything from my phone and start from scratch? like from command line so to speak . .?
This cannot be unless the phone can never ever be reused without changing a faulty hardware
Update: Solution
I had to delete this section since the information provided here was incorrect .. sorry . . still no solution
i am no expert..but just a suggestion
since you can enter bootloader...can i assume u have HSPL2?
if yes, you might want to do a Task 29.
then reflash a new rom.
dutty rom works fine with 2.15 radio
good luck
I see it's your first post here, you have to read very carefully and know what you are doing before flashing your device.
If you flashed your stock ROM thru SDCard method (a stock ROM is device specific), then your device should be in original state: stock SPL, stock Radio, stock BootScreen and stock OS (the 4 parts of a ROM).
So if it doesn't go beyond the white screen after that, you probably could send it back for repairs (if warrenty is not due).
But if you can enter the Bootloader, it's probably not bricked.
But if you can enter the Bootloader, it's probably not bricked.
Click to expand...
Click to collapse
sadly not quite correct. there are a few dozen references to the infamous radio update brick, where flashing seems to work, hspl'ing seems to work, but after restart nothing has changed.
The only suggestion i have to offer is finding another winmo phone (or pc/laptop sd card reader that is pci not usb based) and using that to create the goldcard, though even there i suspect it may not help.
If u can enter boodloader, make sure you see it's connected and see: USB at the bottom white part.
If this is what you see, i would set the stock rom back so everyrthing is back to normal.
Then read these forums good before you proceed.
Succes
Same thing happened to my phone, nothing will fix this, flashing a stock rom gives an error msg half way through , flashing custom rom also gives error. Factory reset, after resetting it gets stuck on htc screen.
weird, my radio is not working too, happened few days ago...
You could always try and remove the SD Card and then switch on into Bootloader Mode. Connect to the computer. Then run a Stock/branded ROM from HTC's website with your phone's serial number (this should at least guarentee that you are downloading the correct ROM).
Original post updated with solution
samsamuel said:
sadly not quite correct. there are a few dozen references to the infamous radio update brick, where flashing seems to work, hspl'ing seems to work, but after restart nothing has changed.
The only suggestion i have to offer is finding another winmo phone (or pc/laptop sd card reader that is pci not usb based) and using that to create the goldcard, though even there i suspect it may not help.
Click to expand...
Click to collapse
--- Tried goldcard method every which way possible.
fred_up said:
You could always try and remove the SD Card and then switch on into Bootloader Mode. Connect to the computer. Then run a Stock/branded ROM from HTC's website with your phone's serial number (this should at least guarentee that you are downloading the correct ROM).
Click to expand...
Click to collapse
-- Tried this as well with no avail....
htc hd 2 leo having problem
sir i have htc hd 2 leo and i was updating the softwere and then it stuck to 90 % and now i am having a screen with 3 colours ... my spl 0.64 version is not going to upgrade and i cant find file on internet working with this version, your already posted files are not working ...
please help me how i can i get rid off this problem and my phone work again ... tell me the whole procedue how to get radio and convert it on android ...
mairu834 said:
sir i have htc hd 2 leo and i was updating the softwere and then it stuck to 90 % and now i am having a screen with 3 colours ... my spl 0.64 version is not going to upgrade and i cant find file on internet working with this version, your already posted files are not working ...
please help me how i can i get rid off this problem and my phone work again ... tell me the whole procedue how to get radio and convert it on android ...
Click to expand...
Click to collapse
It's a prototype, notice the SPL 0.64
Flash stock rom back and then Radio 2.x
This way you can flash newer roms.
Notice you won't be able to install Android or WP7 cause of Prototype having diffrent hardware!
http://forum.xda-developers.com/showthread.php?p=7896583#post7896583
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
I need help with this too..I craked my screen and am going to send it to t-Mobile so they can send me a new one, but I want to put it to factory reset. Ive looked all over cant find them...the post a couple up...links are dead
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
diazjohn said:
you do realize that if you cracked your screen your warranty is already void. it doesn't matter what software you are running at this point.
Click to expand...
Click to collapse
Maybe they have the insurance feature?
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
how_weird said:
Late answer, but go herehttp://www.t-mobile.com/wmupgrade/ to get stock ROM.
follow steps here http://forum.xda-developers.com/showthread.php?t=623402
your done.
Click to expand...
Click to collapse
Sorry for MY late reply, but I put this phone away for a while and now my dad wants to use it. I've gone though the steps, but I can't get past "6. Hold the volume down key and power on your phone. As soon as the coloured screen changes to grey, RELEASE volume down." It never turns grey. I'm one step from taking this phone and throwing it out my window to see it shatter.
art0605 said:
I've been searching on how to completely restore my (T-Mobile) HD2 on this forum for a while and haven't came to it, so sorry if I'm repeating any threads.
Basically I'm fairly novice in flashing and things in that nature. I've been flashing updating Energy ROMs on my HD2 for about six months since I got the phone. Which was fairly simple to do. Since WP7 ROMs, I've switched over to flashing those. The problem is that 99%, it'll flash fine, then won't get past the boot screen. And on the rare occasion it does get past it, I can't turn it off, or else I'll have to trying getting past the screen 1000 more times to be successful. I think I have all the requirements to run WP7, but not exactly sure.
So I would like to know what to download and flash/ install for it to be as if I bought this from T-Mobile today.
Thanks!
Click to expand...
Click to collapse
I have done a dozen of flashings on my Tmobile HD2 and works fine so far. Thanks to XDA forum all the tools I need are available right here on XDA !!! You just to search them out yourself (sorry I don't have the links ....... ).
I suppose you know how to flash your phone so I will not explain details how to do it.
In brief, to install WP7 this is what I suggest you should do -
1. Update flash radio to the latest available update from Tmobile US website, regardless of what ROM you have at present (version 2.15.50.14 is the latest, I think).
2. Flash HSPL 2.08 to your phone to maximize 576 RAM usage, if you have it (do not use SPL 2.08.000 as this will recognize only 448 RAM size).
2. Use Task29 to clean out the existing the existing ROM on your phone (this will erase your OS and you will only be booting on the white HTC logo screen). This will clear out those ROM leftovers on your phone.
3. Flash magdlr 1.12 or 1.13 on your phone (press power button on boot to show magdlr menu).
4. On magdlr menu scroll down to no.5 USB flasher, connect your phone to pc and run dwi.exe on your WP7 installer and wait till installation has completed.
I have done these procedures a dozen times already I have not encountered problems so far. I have been flashing and flashing to choose the best ROM (WP7 or WM6.5.x) I want. On personal note, I think I would settle for WM6.5.x cooked ROMs because of usability and handiness (I find WP7 too complicated to deal in terms of tweaks and handling of personal videos/photos file security).
Some notes:
a. You need to flash radio and HSPL only once.
b. Use Task29 every time you need to install a new ROM (your choice, but recommended).
c. After Task29 you can start out clean and flash to stock ROM or any other rom you choose.
d. There are dozens of videos on YouTube to help you flash but I have not seen one using Task29 to start the process of flashing.
This works for me, hope it does to you as well. Good luck !!!
I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
She lives!!!
Okay, I'm not actually sure if the problem is solved but I'm back in WinMo 6.5 for the time being.
Since it had been off for a few hours I tried my luck again, plugged it into the wall and saw that it was stuck in the boot loop again. But I got distracted and left it, and when I came back it was on the orange WinMo setup screen.
Not sure what happened to make it go from not even getting power from the battery to working normally. But I see now my radio version is 2.05 which is massively old, I'm going to try and upgrade that first and see... hopefully it won't go back to being dead the moment I power down.
Shawn_230 said:
I think I may have bricked my OG HD2 (T8585) while trying to undo everything I had done to it, which was HSPL, MAGLDR and a NAND Android ROM.
It all started when I first tried to flash Kingdom's Sense 3.0 Gingerbread ROM. It told me to create a 340MB partition using HD2 Toolkit which I did. I then flashed the ROM as per the instructions, but it kept getting stuck on the boot logo so I decided to go back all the way to stock WinMo.
I downloaded a stock 1.66 ROM from HTC's website, tried to flash it via USB which failed because I obviously have no ActiveSync in Android. So I loaded the image onto my SD card and tried to flash by holding Vol Down and Power.
That was the first sign of trouble, about 1/10th during upgrade process it gave me some errors and rebooted to a black screen with a silver warning triangle.
Trying to go back into bootloader, I got the message about "upgrade ROM code error."
Since it had reverted back to SPL 1.42 I tried to reflash HSPL2 through USB, which worked fine, got the "We bricked it " message and everything. But then I tried to install MAGLDR and nothing, it fails even though it recognizes the USB connection.
So what can I do? On the one hand my device can accept and load HSPL2 and my computer is recogonizing the USB connection, but other than that nothing, it won't even turn on without being connected to external or USB power.
I also tried installing stock 1.43 ROM and that goes fine, it gives me an okay on everything but it gets stuck in the white HTC bootscreen in a loop.
I know I probably made a huge glaring mistaking to cause this, it's probably because I've bought a Transformer tablet and a Galaxy S2 in the last month so the steps regarding the HD2 were probably a bit of a blur. I guess the stock ROM probably included a radio that I wasn't supposed to flash, causing my device to be bricked.
But is there anyway I can get some type of OS working on this poor HD2 now?
Click to expand...
Click to collapse
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
germotlp said:
I had pretty much the same problem as you, but mine is the tmobile us version. I tried flashing back winmo from android via sdcard method but i got an upgrade error. I tried flashing with microSD card sizes 8gb, 16,gb, and then 2gb which was recommended, but still no luck. I managed to connect the hd2 through usb on the tricolor screen and flashed back to hspl2.08 and magldr and cwm were still on. But i would like to still get back to winmo stock as if it came from tmobile.
My question is if i download the latest update from tmobile which is T-Mobile HD2 MR Software (Version 3.14.531.1), what is the correct spl i should have installed on the hd2 so that htc and tmobile wont know that i messed with the spl? is it 3.03? I was going to connect via USB on the tri color screen again, run the EXE and manually install the SPL? I just need to know which SPL to install after i run the latest winmo update. Please advise on the SPL and the method i'm going to take on reverting back to winmo. Thanks.
Click to expand...
Click to collapse
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
This is driving me crazy now...
I managed to flash HSPL 2.08, and then MAGLDR 1.3, and then CWM recovery on top.
But this still seems bricked to me, still needs external power to turn on and I can't actually flash a working ROM... flashing a ROM via USB gives connection error and flashing via SD card goes fine but gets stuck in a boot loop.
What can I do at this point short of tossing the phone? I've tried stock 1.48, stock 1.66, a bunch of radios from 2.05 to 2.15... everything.
I am doing some research but the only results I find are T-Mo HD2s being bricked by the wrong radio. I have an original HD2 and I never flashed a radio intended for another HD2 model, so how is my phone so bricked all of a sudden?
All the threads I've found say if you can get into the bootloader then there's some hope but I doubt it because I can't successfully flash anything with it. I don't even know how I managed to get back into WinMo briefly last night... think my HD2 is probably just toast.
Okay, I finally solved my problems for sure - bent charging leads in the battery compartment!
Anyone having boot issues, take out your battery and look at the metal leads and you will probably find them bent out of shape. They are incredibly flexible, so just make them straight again and it will work. I assume it cuts external power briefly right before booting into WinMo, which is why it was rebooting constantly.
So I suppose for me this was a huge case of confusion, I got all confused with bootloaders and MAGLDRs when the problem wasn't even software related.
Shawn_230 said:
So it sounds like you lucked out, huh? So your HD2 works at least? I believe if you succesfully flash an official ROM like from T-Mobile, it will replace everything including the SPL back to stock - this is what I was trying to do by flashing official 1.43, to go back to factory mode.
I seem to be worse off than you though. I posted last night how my HD2 was back up running WinMo, but as suspected the moment I rebooted it was back stuck in the boot loop.
Any ideas? I wish I could get the HD2 working again so I could set it aside and get to playing with my new Galaxy S2.
Click to expand...
Click to collapse
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
germotlp said:
The problem with my hd2 is the CPU is overheating thus causing it to freeze or lock up, and gets it annoying. After hours of searching on XDA, that's what seems to be the problem. I can't even talk on the phone for more than ten minutes or else locks up. So my idea was to get it back to winmo stock and see if it still locks up. If it does then i will probably try to send it back to HTC and see if they send another one maybe or fix it.
Ive had no luck luck flashing back to winmo from sdcard so i think i should try flashing back to winmo via usb on the tri color screen. Ive read on XDA that if you flash winmo via usb that it doesn't replace your SPL, and you have to run HSPL4 and flash it manually. I'm just not sure which SPL i should flash. I'm assuming 3.03 maybe?
What you could try is using an sdcard that is 2gb or less. Ive read that anything higher than 2gb will cause issues. I'm still a noobie at this rooting biz. Hope that helps.
Click to expand...
Click to collapse
Which model HD2 do you have?
Find and download the stock ROM from this thread, get 1.66 since it will work with HSPL2 which is the latest HSPL that will work with MAGLDR (for Android and WinPhone7).
You can flash that through SD card and it will go back to total stock, including stock SPL. I assume you know how to pull the .nbh file from the ROM you download, so just rename to LEOIMG.nbh and put it on your SD card.
Go into the tri-color screen and it should flash fine and give you factory reset. This is where it wasn't working for me, but not because I had flashed the wrong ROM or something but because I had messed up the charging leads in the back while popping the battery in and out to reboot as I was flashing.
Man I downloaded 1.66 last nite and tried to flash back to winmo from android and its toast. Not sure what went wrong. Oh well.
Sent from my HTC Sensation 4G using XDA App