Help! I tried several roms and radios in hd2 (asia) and when it works, when i trigger 3G, turn off the device and no longer works.
help me friends !!
a hug from brazil !
roosedani said:
Help! I tried several roms and radios in hd2 (asia) and when it works, when i trigger 3G, turn off the device and no longer works.
help me friends !!
a hug from brazil !
Click to expand...
Click to collapse
Can you still go to the bootloader? if yes then try flashing correct stock ROM from SD Card. It should be ROM from your default carrier, i hope it works.
Can you entered Bootloader? If done you can using MTTY 1.42 for clear BINFS
instruction here
http://forum.xda-developers.com/showthread.php?t=623356
After that you can reflash by SD card.
Hope this help!
OK .. i try what you said .. install ..ok .. boot .. ok .. when the windows try turn on wi-fi, the system freeze and then no longer works. this is a radio problem?
PLEASE !!! anyone can help me ???? i'm without cellphone a month !
Related
Hi All ,
I have a problem with my xda ages ago i tried to flash it to WM2003 and it failed , and now it wont do a tihng except sit in its cradel and charge .. i tried to load a new rom onto a SD Card and it failed because the bootlaoder wont work even when i press the soft reset button can anyone helped me ? . plzz im in dire need of this phone working
love emma xx
No one ?
Already Emailed you back.
Stefan
i have pretty much same problem
So what do you guys get, when you try to flash via SD-Card?
Stefan
Where can I get a new ROM form, please? Got the same original problem, but not got this far yet.
'from' that is!
http://www.romkitchen.de/
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Hi guys. I just flashed a cooked ROM for my hero (called: Hero AOSP 2.0.1-r6). There was no problem while flashing the Radio & SPL. After i flashed the ROM, i selected reboot/restart the phone. But my HERO wont be start. It always starts with the "HERO" screen and turns off and restarts again again aigain and aigain.
Can someone help me pls to save my HERO.?
ps: my HERO isn't branded.
thx in adv.
i solved the problem by myself guys. I trid to connect my in fastboot mode and perform a new ROM flashing. Everything works fine now.
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Just guessing - did you flash Radio ROM which is compatible with your ROM (usually list of compatible Radios you can find in the first few posts of the thread of ROM)
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
Restart from bootloader mode. Make task29, After install a new version of Radio (2.15) and then flash a custom ROM. If you do not know how to make that, send a pm to me.
nipinder said:
i had a custom rom when i got my hd2
install hard spl n then install a custom rom
since then when ever i restart my phone the phone gets stuck on the black screen .it doees not load the windows..
each time i hav to restart or the phone is stuck i have to hard reset it which is annoying..
any 1 can help me plzz...
it would be really greatfull
thnks
Click to expand...
Click to collapse
If you could post your "bootloader" info (what does is show), custom ROM+radio info, HD2 version (T-moUSA or EU), and the method/process you used to flash that would help us help you quicker
hey guys thnks for ur replies
my hd2 is nt a t mobile its a normal htc hd2 with 512 flash memory size
my radio version is 2.05.51.05_2
protocol version 15.28.50.07U
my stock version was 1.48 then later i made it 1.48 hspl then later to install duttis n4s legacy v3 i installed 1.66 hsplversion.. then ROM works its jus wenever i restart it wont boot i always have to hard reset it..
guy thnkx for ur replies ..really appriciated
guys thnlx a lot for ur help
changed the radio version to 2.11 its works like a charm..
thnkx guys