So I'm having this problem with these 2 things.
If I install MDJs gingerbread nand rom after recovery, my recovery breaks and I can't backup or restore or pretty much anything useful in it. Nothing works and I keep getting errors like can't find MISC, can't mount cache/recovery/log or something like that and a bunch of other errors, so I reinstall the recovery but then my room gets an error loading from MAGDLR which says "nand kernel open failed" in red and my rom won't load so I have to reinstall the rom, and then recovery breaks again.
Any ideas on how to fix this? I don't think it's just a problem with MDJ's rom, but then again I don't know enough to figure out what the problem is. Any help is appreciated, thanks
You don't just find a nand build and flash it on... You need to use specific builds that support clockwork to be able to boot successfully. They're zip files, and there aren't many in the nand section.
To install it, you have to copy the zip file to your sdcard, and through magldr, Boot to SD by holding down the power button, using the volume rocker to navigate, and then through clockwork, flash the zip onto nand.
Moon2 said:
You don't just find a nand build and flash it on... You need to use specific builds that support clockwork to be able to boot successfully. They're zip files, and there aren't many in the nand section.
To install it, you have to copy the zip file to your sdcard, and through magldr, Boot to SD by holding down the power button, using the volume rocker to navigate, and then through clockwork, flash the zip onto nand.
Click to expand...
Click to collapse
So how do I get the clockwork recovery to work after installing the nand rom?
The mistake you're making is that you're flashing on a "NAND" build after installing clockwork. YOU DO NOT INSTALL A ROM WHERE YOU HAVE TO RUN a DFT.exe or AndroidInstaller.exe or anything of the sort.
To access clockwork again, reboot, hold down the power button, and choose boot Android from SD.
Note: Future magldr versions may have another menu for this build in.
James_Caliber said:
So how do I get the clockwork recovery to work after installing the nand rom?
Click to expand...
Click to collapse
Buddy if you are getting "All Done" message after installing a NAND rom through Clockwork Mod Recovery but still not able to boot( i faced this problem before), then I am afraid you will have to do what they call "task 29"...do some searching on xda for links, i'll give you the procedure -
Basically, task 29 is to cleanup the system completely and start all over again...which means that after doing task 29 you'll having nothing but hspl on the system. As scary as it sounds, since HSPL will not be wiped, you have nothinng to fear but only follow each instruction carefully:
1. back up and format your sd card to clean it up.
2. download Task29 and put your own RADIO file(if you don't want to use the provided radio file in Task 29 folder). e.g. i'll replace my radio rom 2.15.50.14's ".nbh" (new Radio) in the folder which had some 2.08.xx(.nbh)(older radio).
3.a. Restart phone by pressing volume down button and power button simulatenously, this would bring the red/green screen - connect USB to the pc and phone.
3.b. Run the update utility, after which white htc screen would boot and basically your system is completely clean. just pull out the battery and retart system by pressing volume down button and power button simulatenously, this would bring the red/green screen.
4. Now one by one install MAGLDR 1.11 (DAF.exe installation)
5. then install clockwork recovery for hd2 (DAF.exe installation, which gives you partition messages)
6. boot into clockwork recovery, you will notice the mounting errors will be not there now
7. Install your NAND rom from sd again and reboot, it shud work this time
Getting to Recovery in GB
Besides using a reboot into recovery app, you can also shut down the phone, then pull the battery, put the battery back in and the normal Vol Down + Power will get you into Clockwork Recovery. Seems like GB is in some kind of stand by mode even when you power it down.
WILL_B_WOODS said:
put the battery back in and the normal Vol Down + Power will get you into Clockwork Recovery.
Click to expand...
Click to collapse
No it won't, it will put you into bootloader.
Related
hello all,
Just flashed this ROM using clockwork, only problem I ran into was clockwork will not reboot into recovery. Instead it reboots into samsung recovery.I would like to re-flash ROM. I am new to this, I was an iPhone user and it was pretty simple to reinstall operating system.
I use a macbook with snow leopard, what is going to be my best option to re-flash with the macbook. I have read about Odin, and ADB. But not really sure which to use or how to use them for just flashing a custom ROM.
Any help would be great!!!!1
RAMROD
Search "boot into recovery"....using buttons.
Power off
Hold vol+/vol- (keep holding)
Hold power (keep holding all three buttons)
Wait vibrant screen...wait for black...wait for second vibrant screen and release power button ONLY.
Should be set.
OR
Search for OS X...you can use Terminal to manually flash/reboot/etc. through utilities. Be careful though, the commands are slightly different.
I'm running OS X 10.4 (tiger) and never have to use the computer (outside of TGA_Gunman's one click root program)...everything can be done through the phone in most cases.
I have no problem getting it in this mode. I am trying to get it to boot into clockwork recovery, and the only thing that is loading is the stock kernal recovery menu.. So I am looking for a method that I can do it with my macbook. I have searched in google, and found other tutorials for other phones, but not the vibrant. If you know of one please let me know..
thanks
in sammy recovery hit 'reinstall packages' (may need to do this more than once) and it will reboot you to clockwork. then flash through clockwork like normal. this is why you need to leave the update.zip file on your sdcard after installing clockwork.
funeralthirst said:
in sammy recovery hit 'reinstall packages' (may need to do this more than once) and it will reboot you to clockwork. then flash through clockwork like normal. this is why you need to leave the update.zip file on your sdcard after installing clockwork.
Click to expand...
Click to collapse
I never removed the zip file from sd card, in fact while looking at the files contained in clockwork mod file. It contains the same files as my other Vibrant that is running fine. Just doesn't have Bionics Obsidian 2.2 running on it..
I tried what you said about clicking on re-install and did that 5-6 times. That didn't improve the problem.
thanks for the idea,
Back to the original Question, what is the easiest way to load different rom on my phone with my macbook?
Does the phone still boot up normally? If so, open Rom Manager and select "Flash ClockworkMod Recovery". Then select your device. Reboot into recovery and if you are still in the stock recovery, hit "Reinstall Packages". If that doesn't work, then I have no idea...
I've spent my entire day trying to flash a recovery image on my streak to no avail. I've rooted it using the super one click, have superuser on my device, along with clockworkmod.
I've confirmed my device is rooted using z4root.
I've tried flashing the recovery via clockwork, it says it was successful, yet when I reboot to recovery, I always end up in the regular OS, like all it did was reboot. Furthermore, trying to manually get there, holding down the buttons, tells me that the stanard recovery wasn't actually overwritten. When I go through fastboot and flash it that way, both computer and streak tell me that everything was successful. Yet, the recovery was still not overwritten.
My end goal is to put Steve's ROM on the streak, but I can't even get the recovery overwritten with clockworkmod.
I have a Dell Streak OEM:340. Thats the locked ATT version, which I think might be a part of the problem.
How do I end up with Steve's rom?
Sounds like you are using ROM manager? That does not work well with the Streak. See this article. ROM manager may actually flash your recovery, but does not work to start the phone in that mode.
You can flash the recovery image to your phone in fastboot mode. Here is a tool to help.
You get to fastboot mode by starting the Streak while holding the camera and power buttons at the same time. Then select fastboot from the top right of the screen and plug your phone into your computer. You will need the Dell drivers for this.
Also be aware that you need to rename install-recovery-sh to something else to prevent the stock recovery from being installed when the phone restarts. It's in the folder /etc. You have to use root explorer or an alternate method to do this, but it requires root.
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
kyrillos27 said:
I am using a ROM manger, but if that doesn't work as well, I'll stop.
I've been fastbooting it the majority of the time, flashing the ROM, but it says I've done it correctly, even though I obviously haven't. So far, all I know is that it's been rooted, and the recovery flashed via fastboot.
Click to expand...
Click to collapse
Have you renamed the install-recovery.sh file so that the custom recovery won't be replaced by the stock recovery when you reboot? If not - do so.
Make sure that the Streakdroid rom you want is in the root of the SD Card along with the install.txt file.
If you can get into fastboot mode and connect to your computer I suggest using MultiRecoveryFlasher Streakmod recovery. You can reboot the phone from there also.
When you reboot you want to get to recovery mode. Turn your phone off then press the power button tile the leds light up and as soon as they do hold down BOTH volume buttons. See this gallery for what Streammod recovery should look like. Selecting the #2 option will take you to the streakmod recovery options. You use the "apply sdcard:update.zip" to install the ROM.
See the release thread for the ROM you are installing for more info and post any problems or questions you have with the ROM in that thread.
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
kyrillos27 said:
I have not renamed the install-recovery.sh file. in fact, haven't seen one through the process. To be honest, I'm not sure this part has been done at all by me. How do I go about doing that?
Furthermore, choosing the second option in recovery doesn't give methe streakmod options, it just tells me everything will be erased (stock Dell recovery). How do I make sure that this gets corrected?
For the record, marvin02, thank you thus far for the amount of help you've been giving me.
Click to expand...
Click to collapse
The file install-recovery.sh is a script that runs each time your phone is started. It will replace a custom recovery (streakmod) with the stock recovery when your phone starts, so the next time you enter recovery mode you are back at the stock recovery.
If you are going to dstay with a stock ROM, but want a custom recovery you have to rename the file. The easiest way (IMO) is to use Root Explorer which is an app you have to buy. You just open root explorer and the open the folder named etc and find install-recovery.sh long pres on it to get a menu to pop up and then select rename.
You don't have to do that to get a streakdroid rom installed if you enter recovery without letting the phone restart first.
Put the streakdroid rom file and the install.tx on the root of your SD card
Turn your phone off
Turn phone on in fastboot mode (camera and power buttons at the same time)
Use this tool to to flash the recovery you want
Using the same tool you can reboot the phone
As the phone reboots (wait for the leds to turn on just like they do when you restart the phone) hold down BOTH volume buttons to enter recovery. If you let the phone boot normally and you have not renamed install-recovery.sh the custom recovery will be over written.
Select option 2 and you should be taken to the streakmod options (images here)
Select apply sdcard:update.zip from the recovery menu
There will be two options on the next screen, select the one that lets you navigate to/select a file and then select the ROM file you put on your SD Card.
The ROM should install, be patient when it reboots it can take a few minutes.
Hello, I need some help trying to install the 1.9 ROM. I just purchased a Dell streak coming from an Iphone. Because of a deteriorating eye condition the big screen is a blessing. I bought it used on ebay. It originally had stock 1.6 which i upgraded to stock 2.2 (340) by downloading and running the pkg file. It was very easy to do. Im an att customer this is the relevant information regarding my version of 2.2 .
Version 2.2
Baseband GAUSB1A134031-US
Kernel 2.6.32.9
Build 14844
I have read through these forums extensively particularly the "how to" forums for days. After reading all the various variations for upgrading the rom (my phone lags and i want to see if the rom upgrade will fix this) I developed what I though was the proper procedure for installing 1.9. These are the steps i followed:
1. Install Android Drivers
2. Enter Fastboot mode
3. Installed Clockword Mod Recvery
4. Loaded the install txt file and 1.9 zip file on root of sd card.
5. Flashed the Clockword Mode Recovery IMG using fastboot. Fastboot said recovery was "done"
6. Rebooted.
7. Went into recovery mode by pressing Volume UP and Down and power button
8. Chose option 2 upgrade from SD card.
now its my understanding that doing so was supposed to take me to the clockmod recovery screen which would then give me the option of upgrading from the zip file. Instead I get a message in light blue which says in part
"Android System recovery utility GAUSb1a134031
To perform emergency software recovery you will need to insert SD card"
I then pull the battery and reboot and it boots up fine into the stock 2.2.
Now the question is what am i doing wrong. Im thinking that maybe its the baseband? and that I need to flash a new baseband. If anyone can help it with some guidance it would be much appreciated.
3.
Once you flash Clockwork you cannot let it boot. The OS will over-rite Clockwork. As soon as you flash Clockwork, hold both volume buttons down while it is rebooting. Selet option 2 and you should get the Clockwork menu.
Thank you i will give that a try
Didnt work. I do the fastboot recovery flash which it indicates is done. I then give the flashboot reboot command As soon as it starts rebooting i hit the volume up and down and power buttons but it still reboots into stock 2.2. I don't even get the recovery screen
Fuigured it out i only needed tto hold the volume buttons. Now im there thanks again
Hmm, you should be getting a recovery menu either way. The only thing I can think of is to try and hold both volume and power buttons down at the same time. This is how I normally access the recovery menu when not flashing the reboot comand. If thats not it, may be an issue with the recovery image. Have you considered StreakMod Recovery?
mdb4403 said:
Fuigured it out i only needed tto hold the volume buttons. Now im there thanks again
Click to expand...
Click to collapse
Ok, Cool!
I went from stock Froyo 2.2 to MIUI v3 using the following link.
http://forum.xda-developers.com/showthread.php?t=992251
Now when I startup my phone...
For one, it won't connect me to a network so I can't get phone calls or texts etc.
Also my volume up button is switched with my volume down button.
Trying to make a phone call it says "Mobile network not available".
Does anyone have any information to help me fix this problem? I am stuck.
Yea flash the miui version made for the vibrant in our development section
http://forum.xda-developers.com/showthread.php?t=992302
The one you flashed is for the International galaxy S
bfranklin1986 said:
Yea flash the miui version made for the vibrant in our development section
http://forum.xda-developers.com/showthread.php?t=992302
The one you flashed is for the International galaxy S
Click to expand...
Click to collapse
Ok sooo...
I downloaded
kernel-cm-7-INITIAL-Vibrant-signed.zip
renamed it to update.zip
copied the update.zip along with the MIUI 1.5.20 english pack one to the root of my SD card (internal sd root)
Went into recovery mode, and tried to flash update.zip. It gave me some assert error right away. Now my phone is in a cycle of rebooting where it reboots into the flashing thing, tries to load real quick and then reboots itself.
Any tips? I'm kinda scared.
Odin back to stock and then try again, this guide by s15274n has all the files you need and step by step instructions.
http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
The vibrant files you flashed probably weren't compatible with the I900 kernel/recovery you had flashed.
GTASouthPark said:
Ok sooo...
I downloaded
kernel-cm-7-INITIAL-Vibrant-signed.zip
renamed it to update.zip
copied the update.zip along with the MIUI 1.5.20 english pack one to the root of my SD card (internal sd root)
Went into recovery mode, and tried to flash update.zip. It gave me some assert error right away. Now my phone is in a cycle of rebooting where it reboots into the flashing thing, tries to load real quick and then reboots itself.
Any tips? I'm kinda scared.
Click to expand...
Click to collapse
odin jfd, root, flash recovery then start over with the cm7 kernel then mui.
I'm having a problem following the guide...
Under 2 - Download 3 files..
Mount your phone and move the rom to the internal
AND the UPDATE.ZIP << DOWNLOAD
file if you wiped both internal/external or need to root.
Power down the phone, or pull the battery.
Click to expand...
Click to collapse
I don't know how I can get my phone mounted. Whenever I plug my phone into my computer (with the battery in), it automatically reboots itself and starts the crazy reboot thing. I also can't get back to recovery or downloading mode, it automatically goes back into the reboot thing.
And then in step 3 where it says start Odin, plug in your usb cable. With the battery out of your phone hold both volume buttons for a couple seconds and then plug in your USB cable. That doesn't take me to downloading mode.
EDIT:
Okay I figured out how to get it into downloading mode again. I need to do what it says above by holding the volume buttons with the battery out etc. Then you add the battery.
Hi guys. I got Odin to work. got back to stock.
Then got back into recovery mode to flash the cm7 kernel...
It is the same error as last time. Here's the actual error this time.
-- Installing: /sdcard/update.zip
Finding update package...
Opening update package...
Installing update...
assert failed: is_mounted("/mnt/sdcard")
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
GTASouthPark said:
Hi guys. I got Odin to work. got back to stock.
Then got back into recovery mode to flash the cm7 kernel...
It is the same error as last time. Here's the actual error this time.
-- Installing: /sdcard/update.zip
Finding update package...
Opening update package...
Installing update...
assert failed: is_mounted("/mnt/sdcard")
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Are you going under install zip from sdcard or just pressing reinstall packages? Instructions say to select reinstall packages after you rename it update.zip
bfranklin1986 said:
Are you going under install zip from sdcard or just pressing reinstall packages? Instructions say to select reinstall packages after you rename it update.zip
Click to expand...
Click to collapse
I boot into recovery mode. It takes me to the stock recovery mode. Then (with the update.zip and the miui zip in the root) I hit reinstall packages. It takes me to the clockwork recovery. Then I do install zip from sdcard. Trying to install the update.zip or the miui at this point gives me an error and then any kind of restarting will throw it into the reboot cycle.
EDIT:
When do I remove the battery? I do reinstall packages, and then after about a second or two it goes to the clockwork recovery, and then I removed the battery like it said. After I booted into recovery again and it took me to the clockwork recovery again, and then I tried to load the miui and again an error flashing.
EDIT 2:
For some reason Odin back to stock changed my phone to 2.1.. I upgraded it to version 2.2.1 (not using keis). I was able to get much further than normal when flashing the miui.zip.
My phone tries to startup, it gets to the Samsung loading image (which says i9000 under the samsung logo).
After that the screen goes (and stays) black. When I hit any of the buttons on the bottom, they glow white so I know that it is turned on.
I can't see anything on the screen, but I must be able to get it into downloading mode because I can get it to say 'added', and get try to start loading things, but then it starts never actually connets, it just hangs. Any ideas? Getting it back to stock right now would be fine so that it is usable again.
EDIT 3:
Ok, now I can see things again. For those who are wondering...
I had downloaded the 'Galaxy One Click Root' thing to try to root my phone before installing miui like it says. Well there's also a unroot button. I clicked that and I got it to go back into this custom recovery image. Once I did that, I navigated around a little and found something that said switch to Downloading mode. I did that, and then was able to use Odin to get back to stock. The screen is working, and so does the radio. It's back to 2.1 though. hmm..
ok so lets try this from the beginning
go ahead and odin to stock jfd (2.1)
now let phone boot as normal
no worries about letting it sit 10 mins or anything.
ok so you have the cm7 initial kernel as an update.zip correct?
3 button into recovery reinstall packages twice that should load you into clockwork
(orange clockwork menu)
1 Mounts and storage menu
Format system/cache/data (do all 3)
+Go Back+
wipe data/factory reset
Pull battery Or just press and hold all vol up + down + power
back in recovery.
install zip from sd Card
Install the Miui ROM reboot system.
lemme know how it goes.
boystuff said:
ok so lets try this from the beginning
go ahead and odin to stock jfd (2.1)
now let phone boot as normal
no worries about letting it sit 10 mins or anything.
ok so you have the cm7 initial kernel as an update.zip correct?
3 button into recovery reinstall packages twice that should load you into clockwork
(orange clockwork menu)
1 Mounts and storage menu
Format system/cache/data (do all 3)
+Go Back+
wipe data/factory reset
Pull battery Or just press and hold all vol up + down + power
back in recovery.
install zip from sd Card
Install the Miui ROM reboot system.
lemme know how it goes.
Click to expand...
Click to collapse
I was back at stock (which I'm not sure is 100% stock because when I turn on my phone, it has a samsung GT-i9000 image on the screen for a second or two before saying vibrant).
I have the update.zip and the miui on my internal sd root.
To get into recovery it's just the 2 button combo (volume - and power) for me.
I only have to hit reinstall packages once, and it takes me into clockwork.
I format the things you said and did the factory reset....
Pulling the battery and then trying to get back into recovery mode put my phone into a reboot cycle. (screen where it looks like after you do wipe data/factory reset) and then I have to odin back to stock.
The three button combo does the same thing. I can't get to the next step.
EDIT:
After the reboot cycle thing. I was able to get back into recovery mode even after it started its reboot cycle deal. Then I was able to install the miui rom. My phone has been on the Samsung Cyanogenmod boot screen for about 5-10 minutes. Not sure if it is trying to boot up miui or just stuck. I'll let it sit for another 15 minutes before thinking its stuck.
EDIT2:
Yep, It's been about half an hour. My phone is stuck on the cyanogenmod boot screen. I can't get it back into recovery or downloading either.
EDIT3:
After some serious playing around. I was able to get it back into recovery mode. Wipe everything, apply the update.zip again... and then was able to get back into downloading mode and reflash it to stock.
Does anyone know how to get to true stock, so I don't have the Galaxy-S GT-i9000 Samsung boot screen. I think that this has to do with why it is failing.
After searching around a lot more...
accidentally flashing an i9000 rom flashed the boot.bin and sbl.bin.
The files to odin back to stock jfd doesn't include the boot.bin or sbl.bin so that's why I get the extra boot screen, and why I 'brick' my phone everytime I try to flash another rom.
Apparently I will brick my phone anytime I try to flash a rom from now on, and that I need to find a boot.bin and sbl.bin combo for the vibrant if I want to be able to flash anything again or get any update past 2.1.
If anybody has any info on how to get this boot.bin and sbl.bin combo could you let me know. I can't find the files anywhere.
Hey All, I rooted tonight Via Revolutionary tool but now my phone won't boot.
Basically, I followed all the steps with the tool, Got root and Clockwork and installed the SU.
I rebooted and had a rooted phone.
I proceeded to install Rom Manager, and I backed up my Rom (Created a Nandroid backup I believe thats what it was).
I then downloaded CM7 (the latest one in the Rom Manager) and installed it.
The phone rebooted for about 10 minutes with that CM7 Boot animation looping. I took the battery out, held down the volume button and used Recovery to recover my nandroid backup from before.
Now I'm trying to reboot it and its stuck on the White screen with the HTC Logo just sitting there.
Really unsure what to do...
Edit: this is all kind of assuming you flashed the newest clockwork recovery after you d/l ROM manager ( version 5x of clockwork recovery)
Seeing as how your phone won't boot you will need an sdcard reader to do this. So assuming you have one or another phone with internet you can swap the card into:go [url="http://forum.xda-developers.com/showthread.php?t=1179386]here[/url] and download the clockwork recovery version 4.0.1.5 and place it on the root of the sdcard. (not in any folders) rename the file to PG05IMG.zip EXACTLY and put the sdcard back in the thunderbolt. Now hold volume down plus power Untill the bootloader screen appears. (you may have to select bootloader from the list with the volume rocker and tap the power button to select it) once in the bootloader give it a minute and it will find the file and ask you to press volume up to update. Do it. When its done select reboot and then boot back into the bootloader and choose recovery. Now try restoring your backup. It should.work now. The problem is Clockwork recovery version 5.x is having issues right now with restoring backups.
Sent from my HTC Thunderbolt
Original problem of OP's CM7 install bootlooping was because he didn't wipe data/cache.
As for the white HTC screen it's hanging after restoring for some reason. People have reported this with CWR5 (if that's what you have) but I have been unable to reproduce it as of yet.
That said, it's probably only preventing that restore from booting. You should still be able to boot to hboot (pwr+VolDwn from an off state) and then select recovery at which point you can wipe data/cache and flash something from your sdcard. If you don't want to mess with an adapter to put something on your sdcard, you should still have CM7 on there. You said you used RomManager to download it so it should be in /sdcard/clockworkmod/download when you want to flash it.
Thanks so much! Since I couldn't get a quick response, I used an RUU and went back to complete stock S-OFF. Could you relink the clockwork recovery earlier version please? That link isn't working for me for some reason.
Thanks so much!!!!!!
JBO1018 said:
Edit: this is all kind of assuming you flashed the newest ( version 5x of.clockwork recovery)
Seeing as how your phone won't boot you will need an sdcard reader to do this. So assuming you have one or another phone with internet you can swap the card into:go [url="http://forum.xda-developers.com/showthread.php?t=1179386]here[/url] and download the clockwork recovery version 4.0.1.5 and place it on the root of the sdcard. (not in any folders) rename the file to PG05IMG.zip EXACTLY and put the sdcard back in the thunderbolt. Now hold volume down plus power Untill the bootloader screen appears. (you may have to select bootloader from the list with the volume rocker and tap the power button to select it) once in the bootloader give it a minute and it will find the file and ask you to press volume up to update. Do it. When its done select reboot and then boot back into the bootloader and choose recovery. Now try restoring your backup. It should.work now. The problem is Clockwork recovery version 5.x is having issues right now with restoring backups.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
^^^^^ Follow this to the T and you should be golden. Same thing was happening to me the other night and it all started after I updated to CWM 5.0.1.0
On another note after that debacle I switched to the unofficial TeamWin Recovery and have yet to have an issue. If you're interested you can flash it the same exact way as mentioned in the previous post but download the file from Rootzwiki
http://rootzwiki.com/showthread.php...ery-Project-for-Thunderbolt-(8-8-1.0.3-rbox.2
OK. so let me update yall.
I installed the latest version of clockwork, before yes, and it F'ed me up with the looping bootloader.
I installed the older version of CW recovery, renamed it and flashed it with Hboot.
My Flashes now are all 100% not looping and booting perfectly.
Thanks all!
Double check the backup files. i had a similar issue and noticed the files were backed up as .zip instead of .img. You will probably need to install another rom through clockwork.
GMac0051 said:
Double check the backup files. i had a similar issue and noticed the files were backed up as .zip instead of .img. You will probably need to install another rom through clockwork.
Click to expand...
Click to collapse
His problem with restoring the backup should be fixed now. Koush released CWR 5.0.2.1 which should have fixed the ext3 problem with sense roms.