Accidently stepped on my tablet and now the screen is cracked on the corner. Where can I find a screen replacement and is there a replacement tutorial?
Did you buy the tablet with a credit card? Some cards offer insurance for accidents like yours. You might qualify for a replacement.
webosb said:
Accidently stepped on my tablet and now the screen is cracked on the corner. Where can I find a screen replacement and is there a replacement tutorial?
Click to expand...
Click to collapse
A member has reported he same issue before. here is the thread
http://forum.xda-developers.com/showthread.php?t=894003
And he could not find a replacement screen. I guess that you should contact Viewsonic tech support to see what can they do or how much would they charge you?
festivus said:
Did you buy the tablet with a credit card? Some cards offer insurance for accidents like yours. You might qualify for a replacement.
Click to expand...
Click to collapse
i paid with my debit card. (I dont think my debit card gives me those protections)
@tyy10002 thanks for the link
If you cant find one anywhere else i would try a local glass store. A lot can cut to dimensions and maybe they couldd make one to custom fit our screens?
webosb said:
i paid with my debit card. (I dont think my debit card gives me those protections)
@tyy10002 thanks for the link
Click to expand...
Click to collapse
does you debit card have a visa or mc logo on it? (most do these days) If so you have the option of using it as a credit card or atm card even though both will withdraw funds from your bank account and to you it looks the same the two transactions are different. long tory short if you entered a pin at the pos then you're right you probably don't have those protections (I'd still check with your bank) but if you just swiped it and signed like you would with any other card than you should be covered.
I have a Cracked Glass Too!
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
I sympathize with you but I think you are doing it wrong...
vhecs said:
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
Click to expand...
Click to collapse
Help! I really need a glass screen replacement for my G-Tablet...... the new LCD I bought is basically useless because I don't really needed. I need the glass screen!
Well Vhecs, you answered your own question...
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it.
Click to expand...
Click to collapse
Shouldn't be to hard to figure out.
I have a similar problem... accidentally lost my grip, and now there's a crack radiating out from around where the camera is located. Thankfully most of the cracking over the LCD screen consists of large pieces, rather than tiny fragments that would tend to fall out.
Does anyone know if it's practical to try some sort of resin designed to infiltrate glass cracks?
I don't care about a perfect solution, but at least something to diminish the appearance of the cracks and make it less likely for the glass fragments to fall out would be great.
Bit Banger said:
Well Vhecs, you answered your own question...
Shouldn't be to hard to figure out.
Click to expand...
Click to collapse
haha. LOL! What about the serial numbers?
vhecs said:
I have a cracked glass on my GTablet as well. I ordered a replacement LCD screen B101AW06 V.1 10.1" WSVGA GLOSSY LCD SCREEN LED GLOSSY
and found out that I really don't need it now because the actual glass covering the LCD was the issue. So if anyone needs one, I will sell it to you what I paid $50 plus the shipping to you.
After talking to Viewsonic GTab Support, they basically don't have replacement parts that you can order from them. The only way they suggested it could be repaired was if I purchased it new like that damaged in the box, they would replace it. Or, I would have to find a glass company that could possibly make me one. I asked to speak with someone in mgmt and was promised that he would call me back within 48hrs with a real solution, but I haven't heard from anyone yet. So it appears that I am stuck until someone can give me a replacment glass screen solution.
Anyone out there have a better solution to my issue?
Click to expand...
Click to collapse
Do you still have the extra lcd screen?
Reckn said:
Do you still have the extra lcd screen?
Click to expand...
Click to collapse
You can get it for $63 shipped worldwide.
http://www.ebay.ca/itm/B101AW06-V-1...ultDomain_0&hash=item53e8c0eb33#ht_2497wt_905
Related
How does one go about removing them? I've done a google and XDA-Forums search and found that there are numerous answers all seemingly discounted by any number of people:
toothpaste, no good for capacitive screens
Displex sure, THEY say it's good for the TP2, but so many people say not
So, anyone have any ideas.
And, yes, I know, screenguards are great and the holy grail. I don't have one. So, please, I know I am asking for a cause that I probably could have prevented, but every time I put a screenguard on my device, it was much too mushy and I tried a lot of them.
Thanks in advance.
I would also like to know how to remove the scratches on the screen. The screen guards make the touch screen less sensative. Theres got to be some type of wax or something.
I've used the screen guard that came with my TP2 since day one. My screen is still pretty darn sensitive....
I have skinomi on my tp2 and although it takes alot of patience to put it works flawlessly...ive tried scratching it with keys and the thing just wont scratch!! its awesome..its a bit on the expensive side if you get the entire skin for the phone like i did but its worth the money in my opinion.
go to skinomi.com
I guess T-Cut might work, i used it on my dads samsung and it cleared up the screen some.
When i was a kid we used to wear swatch watches which always got scratched up, we used to use Duraglit made by Brasso which is a metal polish wadding...kinda like cotton wool with a light abrasive in it, which worked wonders!
Something with very light abrasive properties(like toothpaste) should do it but watch out for any solvents and chemicals in the product that may react with or even MELT the plastic!!!!!
most things like T-Cut scratch remover just take a lot of time and patience.
I anything works for you re-post and let us know!
Actually Displex tells you not to use its product on resistive touch-screens.
Anyway, I just ordered iDrops about a week ago and have been trying it for the last day with no results, at all. I've tried variable amounts of pressure, dozens of applications as the instructions say and I've only hurt my phone. All it does it put a strange texture on your phone that makes it grainy and more susceptible to scratches. Even my stylus scratches the phone, now! I had to use a wet cloth to get the graininess away.
My recommendation is not to bother with iDrops. It seems to not work for the TP2.
Hmm, its just an idea but I've been repairing my windscreen today using special resin that cures in direct sunlight. I must say it works pretty well, it's hard to notice the repair. I would try t-cut or other mild abbrasive to get rid of light scratches and fill really bad ones with that resin. Next comes a good screen protector to hide any imperfections.
thanks, but WHAT website
spammmer said:
if your touch screen is very scratch or broken, you can just buy the new touch screen and then replace it, it is easy to do. I also has instruction. you can visit my website.
thanks
Click to expand...
Click to collapse
I see your post, yet, I have no idea what website to which you refer. Nevermind, didn't realize it was in your header.
Why do you not send instructions with the order? IF you're selling replacement parts why then must a customer have to contact you for replacement instructions?
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Not disputing that fact
petard said:
He is just advertising himself. Just find the best price on buy it, you can find the HTC service manual on google.
Click to expand...
Click to collapse
Just questioning that if they sell the parts, why must the instructions be emailed separately?
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
BBM-Lee said:
Bumping because I need the same thing resolved...
Questions:
1) Anyone know a good, semi-reputable site to replace the front screen.
2) Is the front plastic considered part of the LCD Screen, or do they come apart separate? (The scratch on my phone is purely on the outer-most section of the screen, with no damage to the image display) -- I ask as some phones i've seen have an "LCD Display" followed by a "Cover Screen")
3) Regardless of #2's answer, what am I looking to buy (The technical/semi-technical name)? Closest I've seen is LCD Digitizer, but I'm not sure if i need that component or the LCD Screen.... cover.... portion..
Unfortunately the part i saw was $124, and I happen to have insurance on the phone if it does indeed get that expensive, but I just hope the parts are separate ;-)
Thanks,
-Lee
Click to expand...
Click to collapse
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
petard said:
I am nearly positive you do not need to replace the LCD. You only need a new digitizer (that is the name of the layer that recognizes touch) which you can find for around $25 online!
Click to expand...
Click to collapse
Correct me if I'm wrong but changing this digitizer would void warranty if I were to change it myself ? ?
Go to At&t and see if they will replace it for you if you buy the digitizer. If not ask At&t or find a reputable place that does, ive seen for around $50 which was suggested to me by at&t. It's worth the money trust me! When I had my old LG Incite, I tried replacing the digitizer because my screen was scratched and ended up breaking the lock and camera buttons as well as the touch screen. Since then every phone i've had gets a case and screen protector from the day I lay eyes on it. If the case and screen protector are their after I get my phone I wont use it till their on. Scratches just annoy me but I guess i'm just odd lol.
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
But the upper half, around the edges, has took quite a bit of damage. Mostly chipped pieces and dents, partially because of me dropping it and also because the bodyguard I was using previously damaged it! It was one of those crappy snap-on ones. Will never get one again, just bought ghost armor.
Anyway my question is what is the best way to repair the chipped pieces and dents or is that piece sold somewhere so I could replace it? I have no experience replacing things on the phone but I'm sure if there's a tutorial anywhere it wouldn't be too hard for me. Besides I"m not trying to disassemble the entire thing just the upper portion without the screen.
Any help appreciated.
Showtime7 said:
I have been using my T-Mobile TP2 without protection on it for a while and have dropped it a few times. The screen is still perfect and the lower half (keyboard) has relatively no damage other than a few spots of chipped paint.
Deleted stuff...
Any help appreciated.
Click to expand...
Click to collapse
Best option...Ebay>buy broken (software wise) TP2>use if for spare parts
hmmm the only cheap one I could find listed was also worn...
was hoping to profit because i will probably be selling my TP2 soon.
go to ebay and search touch pro 2 houseing case there about 80 bucks they come in balck and red and black and blue the are a little hard to swich over to but i did it and it worked out fine just takes about an hour tools and dremal if and only if ure useing the tp2 t7373
I am trying to locate a replacement front HW button (back key is either cracked or scratched and light shows through) - so, during the lcd repair process, is this button easily replaceable without getting too involved with any other components? Any suggestions or advice on what to do/where to locate this piece of plastic would be met with extreme gratitude!
Get a new housing from eBay.
Just be careful to get one that fits your version.
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
This is an excellent outer shell protector, gives better heft holding (IMHO), rubberized black, very lightweight. Just snaps on and off.
Auction ended, but locate seller store. My Tilt2 fit perfectly in the Touch Pro Verizon except camera button needed cutting shell (trivial task).
http://cgi.ebay.com/HTC-TOUCH-PRO-2...D-COVER-CASE-/130412358305?pt=PDA_Accessories
PDADoc said:
My phone was stolen at work on Friday, so I managed to scramble and find one at a good price on eBay and it arrived this morning.
While I did ask to see photos, and I expected some scuffs, the photos didn't do the device justice at all, as it's much worse than I expected. In all the time I've owned my devices, I've never dropped my phone once, not once! this thing's a disaster.
Click to expand...
Click to collapse
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
So I'll need to get a replacement housing. I've been looking at eBay but couldn't see anything except these ridiculous colored housings for teens and 20-somethings. Where do real adults get the housings from?
Click to expand...
Click to collapse
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
kosmarnik said:
You could take it up with eBay for SNAD, probably get a refund depending on the exact wording of the add, but if it was really SNAD should do it.
Eh? On ebay? You have everything from the original HTC version to various carrier variations, search more/wider. They're 40-80$ though.
Click to expand...
Click to collapse
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
Click to expand...
Click to collapse
Sorry man, but lern2internet. It's the first 4 hits on ebay. Just enter "htc touch pro 2 housing" and check 'worldwide'.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
eBay dispute process is tedious an long winded, but will lean towards the buyer in almost all cases. You just have to be patient.
PDADoc said:
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
PDADoc said:
I've been checking but I haven't found anything but these colored replicas and I don't want that. I'm willing to pay more for the original housing if I could find it.
As for the eBay complaint issue, I did think about it, but eBay is such a PITA about any disputes; they always act as though they don't want to get involved at all. In the end, I'll eat this one caveat emptor, at least this time.
Click to expand...
Click to collapse
On ebay? i suggest amazon.
rete said:
Always pay with your credit card through PayPal. Ebay and PayPal suck at disputes; your credit card company is your fall-back and your best protection as well.
You can get OEM housings for $50-60:
http://www.parts4repair.com/products/Housing-for-HTC-T7373.html
Looks like it's kinda tricky to replace the housing (if you're going OEM)....
http://pocketnow.com/hardware-1/htc-touch-pro2-disassembly-assembly-training-videos
Click to expand...
Click to collapse
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Can use HTC TP2 housing on T-Mobile TP2?
PDADoc said:
Great, thanks for the tip! I'll have to look into this closer, as I think if I go with the Touch Pro 2 OEM housing, there'll be a hole for the front-facing camera.
Maybe I'll just deal with it for now and keep my eyes open for an AT&T Tilt 2 housing somewhere. If it wasn't so beat up, I'd try a warranty exchange through AT&T; I was able to do it when I purchased a used BlackBerry Bold 9700 with no problem.
Click to expand...
Click to collapse
Hi there!
I've a T-Mobile Touch Pro 2 that is quite beat up too & I want to replace the whole housing.
Problem is where I'm living right now, the T-Mobile housing costs double of the standard Touch Pro 2 housing.
Is it possible to fit the motherboard, flex cable & LCD panel of the T-Mobile onto a HTC Touch Pro 2 casing with the power button?
I would need the touch screen & call/navigation buttons as well.
Please advise me if you know anything about this.
Thanks!
Konker
I'm afraid I don't know myself, but if you keep searching, I'm sure there is someone who's done it and knows for sure.
Take a look at this thread: http://forum.xda-developers.com/showthread.php?p=8580850#post8580850
Ok here is the issue. Ive had my Evo 3d Since release, yes its rooted and all the good stuff. But recently i started getting issues with everything from the lock screen ring not responding always to even ghosting of the touch screen. Basically things being selected when im not even touching it. Or when I try to text it wont always select the letters I chose or even numbers when trying to dial a number. I can reset it and it works some but then fails again. From my looking online this is a Touch screen and digitizer issue most likely. Anyone ever have any issues like this or hear of them? Im thinking of just buying a touchscreen and digitizer assembly and replacing it as I would prefer to keep my root (im rooted Via Revolution with 1.40)
Any tips or thoughts would be greatly appreciated. Thanks!! Also any suggestions on where the best place to get the parts for it would be?
constevens said:
Ok here is the issue. Ive had my Evo 3d Since release, yes its rooted and all the good stuff. But recently i started getting issues with everything from the lock screen ring not responding always to even ghosting of the touch screen. Basically things being selected when im not even touching it. Or when I try to text it wont always select the letters I chose or even numbers when trying to dial a number. I can reset it and it works some but then fails again. From my looking online this is a Touch screen and digitizer issue most likely. Anyone ever have any issues like this or hear of them? Im thinking of just buying a touchscreen and digitizer assembly and replacing it as I would prefer to keep my root (im rooted Via Revolution with 1.40)
Any tips or thoughts would be greatly appreciated. Thanks!! Also any suggestions on where the best place to get the parts for it would be?
Click to expand...
Click to collapse
Hi there, sorry to hear about your issue. I think the appropriate action will be dependent on your level of confidence and technical expertise. You can get the glass with the digitizer film for fairly cheap, but the removal and installation is tricky because it is stuck on via adhesive. If you think you can do that, Amazon, Ebay, or I can sell you one for a fair price. The other option is to get the glass, digitizer, LCD, and housing in one piece, you just swap your motherboard into it, and the part of the housing from your phone that has the serial numbers and what not on it. That would run you about 50 on Ebay. Maybe less, maybe slightly more. It is the far easier option technically speaking.
I had a digitizer problem on my EvO 3D and the Sprint store replaced it at the store for free.
But, after the change, Although the digitizer was better it too had the same problem in a smaller area of the screen.
So, it could be the screen and I happen to get two bad screens or it could be a problem with the phone itself.
Download from the market
Draw- Its great for seeing screen problems
Touch Test- It will show you where on the screen that has problem with multiple touch issues.
Thanks for the replies. I think I will get the glass, digitizer, LCD, and housing in one piece. I have plenty of skill as I work with small electronics and stuff like this for a living. BUT It just makes sense to replace them in one shot JUST IN CASE its the screen or the digitizer...
Sad Panda do you sell the glass, digitizer, LCD, and housing in one piece?
Or if anyone has a link to one from a reputable seller id be interested. Thanks!!!
Its the screen.I'm having the same issue right now.Took it to Sprint they didn't have any screens so they sent me a new phone..
constevens said:
Thanks for the replies. I think I will get the glass, digitizer, LCD, and housing in one piece. I have plenty of skill as I work with small electronics and stuff like this for a living. BUT It just makes sense to replace them in one shot JUST IN CASE its the screen or the digitizer...
Sad Panda do you sell the glass, digitizer, LCD, and housing in one piece?
Or if anyone has a link to one from a reputable seller id be interested. Thanks!!!
Click to expand...
Click to collapse
Unfortunately I don't. There is a guy I bought from that was pleasant to deal with on Ebay. If you are looking for a referral from one of us, which I can understand I will get in touch with him for you. The great thing about the option you chose is you can make all the visible parts of your phone look brand new again. I got one from him at auction for 49, I have even seen them cheaper. Ebay is a good place where you can deal with an American rather than worry about international shipping. Let me know if you want the referral.
Lol I also suggest cleaning the screen. Especially if you have a case thapt overlaps a bit. Whenever I've had a similar issue this was it.
Sent from my PG8610000 using xda premium
Sad Panda said:
Unfortunately I don't. There is a guy I bought from that was pleasant to deal with on Ebay. If you are looking for a referral from one of us, which I can understand I will get in touch with him for you. The great thing about the option you chose is you can make all the visible parts of your phone look brand new again. I got one from him at auction for 49, I have even seen them cheaper. Ebay is a good place where you can deal with an American rather than worry about international shipping. Let me know if you want the referral.
Click to expand...
Click to collapse
Yes i am looking for a referral from someone. if you could get in touch with him for me that would be awesome!!
Really have to get this thing fixed Asap. i pretty well live on it and its driving me absolutely mad...
Thanks a ton Sad Panda!!
bmtdan said:
Lol I also suggest cleaning the screen. Especially if you have a case thapt overlaps a bit. Whenever I've had a similar issue this was it.
Sent from my PG8610000 using xda premium
Click to expand...
Click to collapse
First thing I did was clean it. Still no good. Hell I can just sit it on the counter and watch it start doing its own thing. Or if I text it starts going berserk same with selecting phone numbers. Its got its own mind sometimes. Everything says its the screen assembly.
I had the same problem and the sprint tech replaced the digitizer/screen. It did not fix the problem. They replaced my phone on the spot with a gol' darned 1.50 version.
Rob the plumber said:
I had the same problem and the sprint tech replaced the digitizer/screen. It did not fix the problem. They replaced my phone on the spot with a gol' darned 1.50 version.
Click to expand...
Click to collapse
Sounds fishy. I suppose it is conceivable that you got unlucky and the port that connects the digitizer to the motherboard went bad, or maybe even something physically wrong in the bios region, but it does make you wonder if the tech only said he changed the screen and digitizer. Did you get that vibe rob?
Hi
I have HTC Touch Pro 2 and today I broke its screen, it have 3 cracks on it now but strange touch screen is completely working without any problems. I also had screen protector on.
Now what do I have to do? Do I have to replace complete screen or I think I will just need to replace the screen digitizer?
Please guide so I can order it from ebay or if you could recommend any store from where I can buy quality products.
Thanks
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
wizardknight said:
Yep, been there done that. You have broken the digitizer glass most likely. I suggest that you get a LCD&Digitizer replacement from ebay like this one.
http://www.ebay.com/itm/LCD-Digitiz...172?pt=LH_DefaultDomain_0&hash=item2c62be3b24
Do some shopping around I only paid ~$12 for my replacement.
Learn from my mistakes and get the set. It is next to impossible to separate the lcd and digitizer. You can usually swap around the various kinds of lcds too. On my sprint tp2 I installed a at&t tilt screen with no issues.
It is not to bad of a job to replace, but the first time is a little nerve racking as you have to do a total tear down. There are videos on the tear down around online. If you live near Seattle WA, I can give you a hand.
Click to expand...
Click to collapse
Hi
Thanks, thats what I thought too, so your personal experience says its impossible to separate LCD and digitizer.. thats too sad as it can save me some money but I wonder why they are selling so many digitizers alone all over internet, and that is just for $8 to $10 with delivery.....
So finally you replaced both LCD+Digitizer or you were you able to replace just the digitizer?
and I live in Pakistan so I could only use help here or on any IM
Impossible, no. You will go through probably a dozen before you get to a point where you could separate them 50-75% of the time successfully. You will spend way less money if you get a screen set, or a phone with a bad board/esn number to pull parts from. There is an adhesive between the lcd and the digitizer (usually along the edge). The lcd does not have a protective glass layer, and it is sooooo easy to pull the lcd coating right off the lcd base it is not funny. You could tear apart the one you have as a free learning experience. It is not going to cost you anything but your time.
Saw this video
http://www.youtube.com/watch?v=SYqNlM68_as
Well if its just that then its a piece of cake for me too, Im a technical person.... So what Im going todo is to open my mobile first before ordering and try to separate the digitizer from the screen and if I was successful then I will just order the digitizer and if I was not then I will order a complete screen set like the one you mentioned in your link.
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
craftsvision said:
What is this 1st Generation screen and 2nd generation screen... I have the international unlock version of TP2... which one do I order?
Click to expand...
Click to collapse
No idea.
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Replacing the S3 screens are pricey, I'd stick with the scratch until you do some serious damage.
It is inevitable the phone will get scratched at one point so I find it hard to believe someone would pay to have a whole screen replaced based on one scratch, you must be crazy!
If the scratch is that annoying get a decent screen protector and you won't be able to see it.
It would be very expensive. The front plate, digitizer, and amoled screen are bonded in one piece and the assembly is sold at ~US$200 in Ebay.
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
kobz1973 said:
check out this thread .... its a must read for all s3 users with damaged glass ...
http://forum.xda-developers.com/showthread.php?t=1890708
Click to expand...
Click to collapse
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Well where I live its costs about 310$
..so I hope I dont break mine
Sent from my GT-I9300 using xda app-developers app
ABC_Universal said:
I'm not sure, it looks like the front plate and the digitizer are totally inseparable http://www.youtube.com/watch?v=es8gezSdKv4.
Good luck to OP anyway.
Click to expand...
Click to collapse
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
kobz1973 said:
i beg to differ ... did u check out the link to thread i posted ... already a few success stories there ...
and check out this video from about 8mins in, and you can clearly see the glass comes away separately ...
http://www.youtube.com/watch?v=W5IPaCPaY_0
Click to expand...
Click to collapse
Just read, and see that you are about to do the same. Good luck to you as well.
Yet I think the person in the video didn't peel off just the glass but the glass together with the digitizer, which is slightly tinted as seen in http://www.youtube.com/watch?v=es8gezSdKv4.
The cheapest and best solution is to use a mirror screen protector. It will hide your scratch when phone is off.
When Screen on you will not notice it.
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
you can buy the unit for £150 and follow a youtube video on how to replace, or pay between £175-£225 for a full repair.
I took mine to a Samsung repair centre on a Saturday and had it fixed within 30min, paid £215 but just wanted it done.
The glass and the digiizer are glued together so the whole unit would have to be changed.
jayc1980 said:
I'm sure I have read a thread where someone got it replaced at car phone warehouse for £80ish, not sure how true that is as it does seem very cheap for the job. Worst you can do is ring them and ask for a quote and them tell you this ain't true.
I have insurance which would cost me £25 excess through my bank so not really looked into costs of getting things replaced, but I have taken apart a lot of phones in the past and they are getting much harder to replace things like glass on its own. As said above it would have to have digitizer, which is pretty costly to purchase.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Its 80 snoops for s2 in CPW, 160 for s3 as far as i remember ...
HERE IT IS .. The Video tutorial ..
http://www.youtube.com/watch?v=aZuiCsAtThw&feature=player_embedded#!
Samsung galaxy S4 Front Glass Repair in UK
Terpsi said:
Hello all,
Got my S3 a couple of weeks ago and dropped it onto a wood floor on Friday with no case on it (been waiting for mine to arrive from Amazon ). The device seems to be absolutely fine apart from a very small scratch on the top left of the screen. I've been trying to live with it but it's really annoying me and would be more than happy to pay to get it fixed if it doesn't cost absolutely silly money.
Is it possible just to have just the glass replaced or will I have to shell out for the glass and the digitiser etc as well? Has anyone else had their S3 screen repaired?
Thanks
Click to expand...
Click to collapse
Hi
If the screen still functions and the touch is working properly you can just change the glass face but you will have to be real careful as doing it yourself without the right equipment is risky and you can end up without a screen working at all. the whole screen that is currently on the phone will be completely sealed to the phone so it is a slow process to remove it and you can end up pulling the digitizer off the lcd and again this is not fixable if this happens.
also the finish will not be as good as the original without the right type of liquid glue to go back between the glass and digitizer.
at the end of the day you are better off sending it to someone who does it a lot and has all of the gear to do it, as you will get a better finish at the end.
Mod edit: Removed..