HI everyone,
I bought a HTC HD2 some days ago, and there was win mobile 6.5 and android 2.2 installed. THere were many problem on the Android OS, it was very slow, the auto-rotate function didnt work, the "water scale" didnt also work correctly etc. Win Mobile seemed to work properly...
Today, I installed android 2.2 on my storage card and everything is working fine so far. Of course, WIN MOBILE is on my phones memory. Before installing it, the phone had problems with the flashlight (dual flash), simply, it did not work. Now, it is also not working, neither under WIN Mobile nor ANDROID.
How can I check that it is a hardware failure ? Or maybe its ROM or something ?
Thank you
Please, some idea ?
What level is the battery at? As I think thart below 20% the flash stops working.
What happens in WinMo when you run the camera and select flash always on and then take a picture?
THanx for the response, I really need some help.
Under WinMo occurs the same problem, the flash is not working even if I set it to AUTO/ON/OFF.
I also considered that the image quality after taking a picture and comparing it to my friends phone, is more bad than his one
PLEASE, someone help ?
Anyone has an idea ?
vedolino said:
Anyone has an idea ?
Click to expand...
Click to collapse
Hi There
I'm not aware of any "diagnostics" modes to test hardware on the device but the first thing I would do from within Winmo is install a Torch App and try and use the torch, if the Torch app initialises the flash on the back of the phone then you know it's a OS fault whereas, if it doesn't you know it's a hardware fault with the flash module itself on the phone
Here's a link to TorchButton
http://forum.xda-developers.com/showthread.php?t=581382
Let us know how you get on
Thank You very much for the reply.
But I act as a noob.
I copied the whole unrar-ed folder to my SD and to phone, in both ways, when I try to start any of those files it says:
There is no application associated with ... Run the application first, then open this file from within the application.
How to run the application ?
Can someone just download the TORCH and explain to me how to install it
Would be very very thankful.
Can someone just explain me how to install or whatever the torch on my HD2 WIN Mobile 6.5.
THanx
anyone ?
thx
Do not unpack (unzip, unRAR) the file. Just copy it to your phone (or SD card). Use the phone's file explorer and find the file. click on it, and it will install.
.cab files are cabinet files, they pack other files inside them, just like zip files - but they are used in both Windows (the computer o/s) and the WinMo o/s as a unpack and install file (obviously the file should only be run in the desired o/s).
Thank You fred_up,
I barely did it, but the flash is still now working.
I hope its only the flex cable which is not too expensive, about 10 USD !?
Related
hi ppl,
today I ve made rom with the romkitchen, it was 2003 final and everything went ok, phone was functional until I used to try to install some newer versin of the programs I previously included in the rom. That didnt work (of course) so I decide to put another rom without those programs so I can install newer versions but when I run the romkithen exe computer report
in the dos window
error getconnectiontipe - unspecified error
error getting connectiontype
and the program for the patching report that he is trying to get the data from the device and after that he reports that
"cannot execute the remote communication program, please make sure that the usb/serial cable is properly connectes"
of course cable is connected, device syncing with the active sync and the icon is green, used to try to soft reset pc and pocketpc, to hardware reset pocket pc, to connect it to other pc and patch there, to install active sync 3.7.1, to reinstall active sync 4.2, to reinstall usb drivers on the pc, to put sim card and sd card out and to patch then... nothing helped...
what can I do ? is that due to the windows 2003 instalation on the pocket pc (had same version on other wallaby without the problems) ? can I solve that some way ?
I ve read before that patching can be performed from the SD card so I found the xda tools and osi image tool but couldnt found rom nd1 file anywhere (was stupid and didnt make copy of my previous rom)... which rom can I use just to enable USB connection and after that I ll patch it with the "normal" rom from the rom kitchen...
Ive checked those roms http://wiki.xda-developers.com/index.php?pagename=ROMVersions but didnt find any nd1 file in the files I ve checked, can I use those roms with osi image tool eventually ?
which one ?
Lots of questions ... Sorry people ...
I can use it in this condition too but I d rather have an opportunity to flash it to some other version maybe.
Best regards to the community !
I think it´s just the problem that the ROM prohibits flashing via EXE-file. You have to flash via SD-Card.....
You find the ROm to write on the SD-Card in the EXE-FIle. Just extract the exe using winzip, and then you will find it in a subdirectory (normally english, or dependent on the ROM-Language...)
Stefan
Thanks a lot Stefan, so I can use some ROM from the page http://wiki.xda-developers.com/index.php?pagename=ROMVersions ?
Any advice which one should I take please (Im not using any of the operators noted there, just looking for some rom that will function ok) ?
Thanks m8 !
Yes, you can take any rom of it. Mostly the T-Mobile prohibits flashing via EXE-File, but Flashing via SD-Card is more secure in my opinion. So i´ve done 99,9% of my flashes via SD-Card, and you can believe me, i´ve done it a lot of times.....
By the way, which software has to been updated in my romkitchen?
If you give me the hints, i could try to update them....
Stefan
thanks a lot for your time and advices Stefan !
Its not a huge problem but probably we share same opinion - most of the tech guys like to see that everything work fine, if something doesnt work then we re not satisfied.
Basically problem is that I included spb pocket plus in the rom and therefore I cant install spb weather which demands pocket plus v 2.5+ and version in the rom is 2.0. I cant upgrade it coz its in the ROM, used to try to remove it from the registry but no luck, used to install latest spb diary coz the spb weather also work with the diary but looks like that the first thing weather perform is checking of the pocket plus version and if the version is not 2.5+ it stops the installation...
Probably for the most of the people spb weather is not a reason for loosing couple of hours in trying to change rom in wallaby but as I ve mentioned I like the things that work 100%, if some electronic/computer stuff work at 99% that usually bother me. Stupid - I know but thats the way it is.
Im going to patch it thru the SD, thanks again for the all your efforts now and before.
GL & HF !
Sorry...
Still need help, using the OSI tool I copyed NK.nbf file from 4.02.04_eng rom to "XDA SD Card Slot -unknown size" - coz I dont have card reader/writer at the present moment so I tought that I can put the file via the cradle connection while the card is in the wallaby...
Checked the card from the wallaby file explorer but nothing is on the card, since I had expirience with direct writing to c64 and amiga disks writing I assumed that file could be written directly to the card without OS instructions but after the reset of the wallaby it report that card shoud be formatted to become writable... Is that normal, or I should wait for the card writer reader to put the file properly to the sd card ?
If possible please help me with the link for the OSI tool patching, I cant find it anymore, checked thru the site but no luck, dont know what I have to press so the wallaby read the rom from the sd card.
Thanks Stefan & all others
success !
No help needed, I ve made it...
So dont have any fears as Stefan told unpack the rom from the self extracting archive and run osi tool, in the source field set nbf as a file type and then select extraced rom.
As a target you can set card reader/writer and also you can put the SD card in the wallaby as I did. Set the XDA SD card as a target in that case.
Its normal that after the writing (no message that writing is successfull, when it is finished OSI tool will stop) SD card become unreadable to wallaby.
Then perform actions as noted in SD card patching info
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
Action button mentioned above is middle button - "D PAD"
Works like a charm, now I have o2 win 2002 and later I ll patch it to 2003 SE again but without pocket plus.
Thanks Stefan and community !
I've searched this and other forums for solutions (.cab and regedits), but none of them worked for me.
I'm trying to get PC Anywhere 12.5 mobile to run on a custom ROM on my VZW HTC Touch Pro. It works perfectly on the stock ROM, the "pre-release" linked in the stock section, Scott's "6.5 beta" post -- but I can't get the darn thing to properly work on any of Scott's 6.1 custom ROMs. It will install w/o errors just fine on the latter, but as soon as I reboot and try to run the program I get the dreaded "application cannot be found or not signed with a trusted certificate error."
Any help would be greatly appreciated.
Landlocked
I have the same problem with HTC Touch HD...
I´m having the same problem. I try everything that you can think.
My phone is a HTC Touch HD.
The strange thing is that my wife has an Sansumg Omnia with windows mobile 6.1, and I install PCAnywhere and works fine.
If you find a solution, please tell to everybody, i will do the same.
Thank you.
I'm also having an issue with pcAnywhere on my HTC Touch Pro.
It installs fine. However, when I go to connect to a host it sits there with a warning "Warning: Reducing encryption level." -- and it hangs. On the Host I can see the phone trying to connect, but it never makes it. I've tried changing the encryption level to none, tried adding encryption, made sure the phone (remote) and host match.. and nothing. It'll never connect.
The same version of pcAnywhere mobile (3.0.0 Build 123) works fine on my HP iPAQ and HTC Apache without any issues. I've also tried a newer build (from the pcAnywhere 12.5 CD) and I've come away with the same results.
If anyone has any ideas....
Any updates?
Same problem on my htc touch pro
Beefheart36 said:
Same problem on my htc touch pro
Click to expand...
Click to collapse
That sucks, as this is one of the programs that I actually did use. Hopefully someone will figure it out. I'd be willing to donate some $ to the cause.
can you upload the cab so i can take a look at the files and see if i can find an issue...if you want pm me so you dont have to post in the open public...
Any news on these invalid cert. messages? I am having the same issue. Is there a way to turn off certificate on programs??? Wouldn't that be much simpler?
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
I had the same problem. At least for me, the fix was to delete all the files that were MFC80xxx.dll. Then I could reinstall this.
I posted this fix a long time ago, but for anyone that may need it again, the way to get this program to work (at least for me):
After install - reboot the device.
Then, look for all the MFC80xxx.DLL files
Rename them to MFC80xxx.dll - it is important that these are all lowercase (the .dll extension).
It should work indefinitely after that fix.
For whatever reason, when pcAnywhere installs, after initial use or after reboot all the MFC80xxx.dll files have a capital .DLL extension. This will make it so that they cannot be read correctly for any application (including my backup applications). But changing it to smaller case .dll works. If you are concerned, reboot and check if it is still in lower case. It should be, but if not, just rename it again - it should stay for good.
Good luck for all that use this program.
hey guys,
for the fun i tried to run Eclair android on my niki, with in my mind it would not work.
well i did follow a tutorial which was meant for Kaiser/Vogue/Polaris.
then it just booted in Eclair, i made some pictures for you guys to take a look at.
Ill also make a vid, with booting in it, and some things to show.
enjoy!
sorry for my bad english, im from the netherlands
PICTURES
This are some pictures i made from Android Eclair on the HTC Touch-Dual *NIKI*
http://img175.imageshack.us/gal.php?g=img0741.jpg
VIDEO(S)
Here i will post all video's made by me, or people from xda-developers.
VID 1(made by me, do not mind my voice)
http://www.youtube.com/watch?v=z0u1ejw6AF8
DOWNLOADS
Here i will post all downloads you will need to run android eclair on your HTC Touch-Dual *NIKI*
SD-Card rips
Fast tutorial for installing SD-Card rips
1. Download the SD-Card rip package you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer(right-click on start)
6. Go to your device, and select in there the SD-Card
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now just wait till android is started up.
SD-Card rip polymod 2.1 alpha 4(OLD)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals *NIKIS*
But you can always try
http://www.mediafire.com/?gouyxj5igcy
SD-Card rip Android Eclair 2.1 Vogue(NEW)
This is a rip of my SD-Card, i do not know if it works on your HTC Touch-Duals*NIKIS*
http://www.mediafire.com/?mt1wblydryd
SD-Card rip Myn’s Warm Donut(NEWEST)
Here i will post the fastest android release that i found untill now.
This is a SD-Card rip which was installed on a HTC Kaiser, because the NIKI does not have as many keys as the Kaiser, i could not start the installation on my HTC Touch-Dual *NIKI*.
So there only will be a SD-Card rip untill now.
Here is the download link:
http://www.mediafire.com/?mmdihjjez1o
Android install folders
Fast tutorial for installing Install folders
1. Download the Install folder you want from this page.
2. Extract it to your desktop.
3. Now select all the folders, and right-click Copy.
4. Connect your HTC Touch-Dual *NIKI* to your computer.
5. Go to your explorer.(right-click on start)
6. Go to your device, and select in there the SD-Card.
7. Now copy all the just selected files to your SD-Card, this can take up to 20 minutes.
8. Now the copy process is finished, take your HTC Touch-Dual *NIKI* and go to the file explorer.
9. Go to your SD-Card, and run Haret.exe
10. Now you have to watch your screen very careful, when the text “Hold dpad center to launch installer” appears, press the middle button.
11. Now a install menu will come up, select the 1st option, Install system
12. Now there will pop-up a messenge “This will wipe your existing system!” just select YES, this will not remove your windows mobile installation, it should delete a previous android installation, which is not installed yet..
13. Now there will pop-up another messenger “Would you like to clear data too?(Suggested)” select YES again.
14. Now android will be installed on your SD-Card, when it is done, you will return to the install menu, now just select Quit and it will boot in android.
rip polymod 2.1 alpha 4 Install folder(OLD)
This is the Install folder of polymod 2.1 alpha 4.
This is the slowest android i runned untill now, i do not recommand it.
Download link:
http://www.mediafire.com/?zznwujznouz
Android Eclair 2.1 Vogue Install folder(NEW)
This is the installation folder.
Download link:
http://www.mediafire.com/?nxniyktlkuu
Myn’s Warm Donut Install folder(NEWEST)
Please take a look at the SD-Card rip.
Good news
I would to try it out. Can you upload your android package here?
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
im on school right now.
when im home, ill upload a complete rip of my SD card.
what i've done is the following:
i downloaded the pack for the HTC kaiser/vogue etc.
then i used the default.txt from a android made for the htc niki.
the only thing i changed in there was change "Zimage" to "Zimage-monsha"
then i could just install the andoid on my sd card and run it.
i don't know about the battery life yet, i didn't test it very well yet.
it's pretty laggy though so it will need some very good improvements.
Did your data work? I also got eclaire runniung on nike on ext2 partition using the methods from the vogue forums, but I noticed some issues:
- No data
- Slow
- I Tried to patch the new 3d driver stuff into the kernel. Afterwards i had accellerated graphics without textures (live wallpapers). But i have the same issue on some combinations of older builds, kernels and rootfs.
I also tried other builds from ext2 (all without rootfs, no working data on any of them , but it seems like the old versions with rootfs work better (-> data works)
i did not test it anymore.
i was at school.
rightnow im at home, so ill make a rip of my sd card, this is not formatted in ext2 or something.
i just deleted all the data on the sd card, and i just installed it.
it will take a while to upload, cause its pretty big.
right now im going to upload the .rar file.
it is 115 MB big, so make sure your sd-card is bigger than 512 MB
ritzky said:
yes, nike users can use the package for the vogue. the problem for me was that nike could not wake up after sleeping because we have different key mapping than vogue or kaiser. how is ur battery life?
Click to expand...
Click to collapse
i tryed with sleepmode on 0, and it just worken, also on 1 it just worked.
i do not know how to see if full sleep is working, but it could be also working on the HTC Touch-Dual *NIKI*
set pm.sleep_mode=4. Data don´t work. Data don´t work on Nike with more new Android OS like donuts(1.6) or eclair(2.1) only in olders like android 1.5. Nike handsets lacks of android developers. We have no luck like Polaris/Vogue/Kaiser/Diamond users
i know, but i edited the default.txt a lil, by changing the resolution, i had less lagg, but it does not show the whole screen :S
even when im using the resolution of the screen :X
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Running
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
ritzky said:
if u set the sleepmode to 0, can u wake the device? i never been able to. could u post just your default.txt here? anyway, data is working for me.
Click to expand...
Click to collapse
yes it awakes then.
and i did not test it with sim yet, the first thing i wanted to do is a good fast stable android build.
i found one, only one problem:
you cannot install it on your niki, i have to take the data.img and system.img from a HTC Kaiser(which uses my dad)
i already got a rip, right now im going to test if that works.
then i will delete all settings in there, and upload it here, one thing; it is REALLY fast!!
podelz said:
I tried this, i'ts running, here's my report:
1. I cannot make a call (incoming or outcome).
2. I cannot send the SMS
but the operators carries found..
Click to expand...
Click to collapse
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
ok, thx man!
i'm in France right now, so i can't update my thread, when i'm back, i'll look for some newer versions and upload some other SD-Card rips, and Install folders
mrassol said:
I had the same problem first, then reboot the phone and it works great !
My only problem is the qwerty keyboard layout ... mine is azerty
great port thanks !
Click to expand...
Click to collapse
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
lagloose said:
Hi there,
Tried it here in Germany. Boots fine, but no Data. Carrier shows up and after creating a new APN, The Modem APP shows active Connection, IP Address and so on. But for some Reason, there's no Flow of Data...
Any Ideas ?
Greetz lagloose
(BTW: Phone seems to work normal...)
Click to expand...
Click to collapse
Data don´t work on Nike with the more newest android builts. We lack developers
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Does anyone have developent experience with android? I am now compiling the eclair build with the latest libraries from the vogue andoid git tree, but if someone already knows were the data problem is or what it could be i could find a faster solution, any in the development would be great.
mblaster said:
I noticed that data works on eclair and donut, but the connection drops after a (very) short time. Sometimes I was able to load one or two webpages after a fresh boot until the connection went down (20Key Nike, O2 Germany). I also got google sync once working for a few seconds (enough to fetch mail).
So it seems to be more a stability issue than a general lack of data connection.
Click to expand...
Click to collapse
It´s true. It is like get freezed. If you go to modem and you want to disconnect it say disconnected but you can see still the icon and sometimes the up arrow. After this if you want to turn off the hanset you can´t and its needed a soft reset. So after get connect and with a luck to browse two webpages it get freezed
Hello everybody...
This Message I left on an other thread for someone who asked for experience in using this app on a wm 6+ system:
"Just tested pocket Radiologist v2 on a stock 6.5 system of the htc HD2 and ready to revive this thread by now!
1. ADOCE had to be installed - otherwise the executable of the the app ****s up the executing.
2. installation of adoce is a bit tricky ... switch the OS-language (wm5 or 6 or 6.5) to englisch (british) if you use a foreign system. finally restart & install ADOCE. no matter if you switch back to your native language after installation.
3. start pocket radiologist - works but...
4. on the thc hd2 the font/character size is wrong. the toolbar/list which should be docked on the bottom of the screen floats about the half of it. trying to switch the screen to landscape with bsb tools doesnt work. I'm very sorry for this now!
5. Tried WVGA Fix 4 already - the characters' still far too big..."
Anyone's got an idea how to fix this character a/o resolution-problem?
Hope someone can help in the end.
I'm using the palm version on the palm emulator, works ok. the images are not great
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
jsmccabe78 said:
this is interesting as i was just trying to install an older version (for wm5) but was having no luck. states it installs, but cannot find any evidence on the phone that it is there. did you a) install ADOCE and b) then transfer the pocketradiologist .exe and run it from the phone?
Click to expand...
Click to collapse
I did only the install procedure as described. first adoce, second the needed module. i installed it on main memory. execution after installation in that order made me no pain. i didn't transfer anything at all.
hope someone can solve the problem with this software...
Install completed succesfully, but I have the same problem as ppcppcppc (TS), so I hope someone can give input about a possible solution??
Hello ,just joined as i thought this was a cracking site with loads of info and the best place to find help .I have just bought a hd2 as i wanted the latest windows based mobile with a very large screen as i often use memory map and tom tom together ,i have been using both on the XDA ii with out any problems but the trouble was it had a seperate gps reciever ,also the camera was'nt very good .
Couple of questions i need help with please
I have installed memory map and it seems to run fine but is there a way of rotataing the screen on the hd2 from potrait to landscape ?
I have TomTom 7 Version 7.915 PPC ,will this work on the hd2 and is it as easy to install as it was on the XDAii i had ?
I am not very technicaly minded with these things so a very simple guide is what i am looking for .
I have used the search function but not with any success
Thanks in advance
Anyone help please?
You have to be careful which version of TomTom you install.
Here is the 7.917 version which will work with your HD2 - * TomTom v7.917 *
obviously you still need to buy the maps - as this site does not allow warez.
Sorry, I've no idea about Memory Map.
jasext said:
Hello ,just joined as i thought this was a cracking site with loads of info and the best place to find help .I have just bought a hd2 as i wanted the latest windows based mobile with a very large screen as i often use memory map and tom tom together ,i have been using both on the XDA ii with out any problems but the trouble was it had a seperate gps reciever ,also the camera was'nt very good .
Couple of questions i need help with please
I have installed memory map and it seems to run fine but is there a way of rotataing the screen on the hd2 from potrait to landscape ?
I have TomTom 7 Version 7.915 PPC ,will this work on the hd2 and is it as easy to install as it was on the XDAii i had ?
I am not very technicaly minded with these things so a very simple guide is what i am looking for .
I have used the search function but not with any success
Thanks in advance
Click to expand...
Click to collapse
Plenty of ways of doing that: -
BSB Tweaks - http://forum.xda-developers.com/showthread.php?t=589305
Gyrator - http://gyrator.brins0.net/
and probably some others I've forgotten
Try the search function on the forum. "rotation" and "search thread titles" turned up these results - http://forum.xda-developers.com/search.php?searchid=41837256
PS - Speaking from my own experience, I can confirm rotation of Memory map works using BSB Tweaks.
Brilliant guys, just what i was looking for
I have just installed tomtom and it works fine
Just off to have a look about rotating memory map
Many thanks and no doubt i will be back for more help
Can i install the bsb tweaks straight to my phone and everything will carry on working or will i need to reinstall memory map and tomtom after ?
Install BSB & carry on. No need to reinstall Memory Map, etc.
Trying to install bsb tweaks as you have mentioned ,i am trying to follow the video about flashing a custom rom mentioned on another thread , but when i attempt to run the custom ruu ( i downloaded it from this site seperate as one did'nt come with the BsB tweakes ) it keeps telling me" cant install check update utility "
This is what is on my screen
PB8110 XH-BC
SPL-1.66 HSPL XE
0x5
CotulllaHSPL 0x30
I have noticed that the spl is different on the video ,will that make a difference and how do i change it ?
Thanks again
jasext said:
Trying to install bsb tweaks as you have mentioned ,i am trying to follow the video about flashing a custom rom mentioned on another thread , but when i attempt to run the custom ruu ( i downloaded it from this site seperate as one did'nt come with the BsB tweakes ) it keeps telling me" cant install check update utility "
This is what is on my screen
PB8110 XH-BC
SPL-1.66 HSPL XE
0x5
CotulllaHSPL 0x30
I have noticed that the spl is different on the video ,will that make a difference and how do i change it ?
Thanks again
Click to expand...
Click to collapse
spl doesnt matter so long as it ends '.hspl'
The error you got sounds like you havent put the roms.nbh file in the same folder with customruu.exe.
Just those two files in a folder on their own.
BUT you do know bsbtweaks isnt a rom, right? its a program that you install like any other, nothing to do with customruu.
samsamuel said:
spl doesnt matter so long as it ends '.hspl'
The error you got sounds like you havent put the roms.nbh file in the same folder with customruu.exe.
Just those two files in a folder on their own.
BUT you do know bsbtweaks isnt a rom, right? its a program that you install like any other, nothing to do with customruu.
Click to expand...
Click to collapse
No did'nt know that ,how do i install the bsbtweakes program ?
Told you i was no good at these things
like all programs. Copy the .cab file to your phone, anywhere (most people have a folder on their sd card for such purposes) then on the phone open up file manager, browse to where the file is, and click it to run it.
Thanks very much
I have installed all these to the sd card
Setup.xml
000bsbtw.001
00tweaks.000
0cab4a7.004
manila 1.002
openne 1.003
When i run the setup file it takes me to opera .nut nothing happens
If i try to open anything else i get the message ,"there is no application associated ,run the application first .
Dont know what i am doing wrong ,someone please help ?
nope, you have extracted the cab. (The pc thinks cab files are a type of zip file)
Dont do that. Copy the single cab file (bsbtweaks.cab or whatever it is called) to the phone and click it to run.
Cheers for the help yet again ,i have installed it and it seemed to install correctly ,yet when i ran the application it said it needs a newer version of microsoft for it to work ,any idea what i need now ?
Thanks again for your help
sorry, never seen that before. does it work? if it does ignore the warning.
Just figured it out ,there is another file that i needed to upload and it is just the bsbtweake cab file ,many many thanks for your help again
ahhh microsoft framework, thats a different thing.
heres teh microsoft download page for it
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
though i think there is a much smaller version (the one above is 33meg) available on xda dev somewhere.
Your search keywords are ".net framework 3.5"
samsamuel said:
ahhh microsoft framework, thats a different thing.
heres teh microsoft download page for it
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
though i think there is a much smaller version (the one above is 33meg) available on xda dev somewhere.
Your search keywords are ".net framework 3.5"
Click to expand...
Click to collapse
It is on the same link that is on the previous page of this thread for the bsbtweakes ,
I should have read it properly first
hehe, easy to overlook even when things are right in front of you.