I've searched all over the net for an answer to this problem but I cant find it. So here's the question:
Randomly during the day (around once an hour - sometimes even more) CHT2 doesn't let any other program be seen above it (like if I click phone it opens but behind CHT2). Then if I click restart sense then sense turns off and wont turn back on til I restart my computer.
I've tried using different ROMs, removing my SD card (and reformatting).
Any ideas?
Thanks
salonluden said:
I've searched all over the net for an answer to this problem but I cant find it. So here's the question:
Randomly during the day (around once an hour - sometimes even more) CHT doesn't let any other program be seen above it (like if I click phone it opens but behind CHT). Then if I click restart sense then sense turns off and wont turn back on til I restart my computer.
I've tried using different ROMs, removing my SD card (and reformatting).
Any ideas?
Thanks
Click to expand...
Click to collapse
Witch CHT version do you have?
kurt-willems said:
Witch CHT version do you have?
Click to expand...
Click to collapse
I have... cht 2.0
salonluden said:
I have... cht 2.0
Click to expand...
Click to collapse
Hmm; for having a good working CHT
It's better to install CHT 2.0 and CHTEdiror 2.0 right after your ROM installation (on a fresh ROM).
And the installation path for CHT needs to be Internal Memory.
So I would suggest you to reinstall CHT
kurt-willems said:
Hmm; for having a good working CHT
It's better to install CHT 2.0 and CHTEdiror 2.0 right after your ROM installation (on a fresh ROM).
And the installation path for CHT needs to be Internal Memory.
So I would suggest you to reinstall CHT
Click to expand...
Click to collapse
So far that's what I've done - Right now I'm on Dutty's ROM (14) and I installed in first anyways - but I'm going to try reinstalling and trying again.
However you should understand it's not just a problem I'm having once in a while - it's on every ROM after every flash...
salonluden said:
So far that's what I've done - Right now I'm on Dutty's ROM (14) and I installed in first anyways - but I'm going to try reinstalling and trying again.
However you should understand it's not just a problem I'm having once in a while - it's on every ROM after every flash...
Click to expand...
Click to collapse
hmm, very strange that it is on every ROM, specially if you mention that it is alway's bean install on fresh ROM and into Internal memory.
kurt-willems said:
hmm, very strange that it is on every ROM, specially if you mention that it is alway's bean install on fresh ROM and into Internal memory.
Click to expand...
Click to collapse
Yeah... It was also weird that it happened on Energy ROM while it was cooked in!
W/e for now I just reinstalled and its working... maybe it's an addon I had...
Thanks man
salonluden said:
Yeah... It was also weird that it happened on Energy ROM while it was cooked in!
W/e for now I just reinstalled and its working... maybe it's an addon I had...
Thanks man
Click to expand...
Click to collapse
Keep updating your feedback.
kurt-willems said:
Hmm; for having a good working CHT
Click to expand...
Click to collapse
Sorry but i can't agree with you. It is long way from good working
My experiance is as follows:
Stock 3.14 ROM.
Install CHT 2 + Editor.
1) Every reboot i see a message that Services.exe has crashed (remove CHT and message disappears)
2) Memory usage is ~40-50 MB above the default HTC Sence and reducing day after day
3) My clock disappears ~2sec after phone unlock (slide Up-Down and it is back till next time)
4) Sometimes it is stuck on Page 1 (the one with the clock. I know it is customizable) and can not slide to any other tab/page
5) I had Internal storage corrupted 3 times since i installed CHT (~1.5 months).
Without it there is no problem with internal storage.
6) Major lag if the weather animation contains Fog.... again everything is fine without CHT installed
...
and so on
livanov said:
Sorry but i can't agree with you. It is long way from good working
My experiance is as follows:
Stock 3.14 ROM.
Install CHT 2 + Editor.
1) Every reboot i see a message that Services.exe has crashed (remove CHT and message disappears)
2) Memory usage is ~40-50 MB above the default HTC Sence and reducing day after day
3) My clock disappears ~2sec after phone unlock (slide Up-Down and it is back till next time)
4) Sometimes it is stuck on Page 1 (the one with the clock. I know it is customizable) and can not slide to any other tab/page
5) I had Internal storage corrupted 3 times since i installed CHT (~1.5 months).
Without it there is no problem with internal storage.
6) Major lag if the weather animation contains Fog.... again everything is fine without CHT installed
...
and so on
Click to expand...
Click to collapse
Just a question; do you have/use HSPL?
kurt-willems said:
Just a question; do you have/use HSPL?
Click to expand...
Click to collapse
As i mentioned everything is stock (No custom ROMs, No HSPL)
ROM 3.14 from HTC site + CHT2 + Editor.
The only 2 additional softwares i have are Garmin and AllReader but
i think they have nothing to do with those problems
livanov said:
Sorry but i can't agree with you. It is long way from good working
My experiance is as follows:
Stock 3.14 ROM.
Install CHT 2 + Editor.
1) Every reboot i see a message that Services.exe has crashed (remove CHT and message disappears)
2) Memory usage is ~40-50 MB above the default HTC Sence and reducing day after day
3) My clock disappears ~2sec after phone unlock (slide Up-Down and it is back till next time)
4) Sometimes it is stuck on Page 1 (the one with the clock. I know it is customizable) and can not slide to any other tab/page
5) I had Internal storage corrupted 3 times since i installed CHT (~1.5 months).
Without it there is no problem with internal storage.
6) Major lag if the weather animation contains Fog.... again everything is fine without CHT installed
...
and so on
Click to expand...
Click to collapse
Did the CHT Team have any advice for you when you posted this issue on the CHT thread?
livanov said:
As i mentioned everything is stock (No custom ROMs, No HSPL)
ROM 3.14 from HTC site + CHT2 + Editor.
The only 2 additional softwares i have are Garmin and AllReader but
i think they have nothing to do with those problems
Click to expand...
Click to collapse
No, that's right. this have nothing to see with CHT.
But it is a fact that almost 70% of the users from CHT 2.0 are very satisfy and have a non trouble working CHT. but at the same time (without reasons) 30% of the users have troubles.
OP
Stock 3.14 ROM.
Install CHT 2 + Editor.
1) Every reboot i see a message that Services.exe has crashed (remove CHT and message disappears)
Reply
First time i have the same problem, afte that i removed CHT and editor, restart, switced off sense from today settings and installed CHT and editor again, switced on sense and no startup problems enymore, all is working now.
livanov said:
Sorry but i can't agree with you. It is long way from good working
My experiance is as follows:
Stock 3.14 ROM.
Install CHT 2 + Editor.
1) Every reboot i see a message that Services.exe has crashed (remove CHT and message disappears)
2) Memory usage is ~40-50 MB above the default HTC Sence and reducing day after day
3) My clock disappears ~2sec after phone unlock (slide Up-Down and it is back till next time)
4) Sometimes it is stuck on Page 1 (the one with the clock. I know it is customizable) and can not slide to any other tab/page
5) I had Internal storage corrupted 3 times since i installed CHT (~1.5 months).
Without it there is no problem with internal storage.
6) Major lag if the weather animation contains Fog.... again everything is fine without CHT installed
...
and so on
Click to expand...
Click to collapse
That sucks...
Go for a custom ROM with CHT pre-installed or just re-install CHT
Feedback on my cell so far:
I re-installed CHT (not the editor, just CHT2) and so far it's smooth. All my setting are the same except now I only have 2 levels instead of three (which is actually fine). I hope it keeps up..
Related
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
be more specific. How it cant run? Install properly? wat else SIP and Today Plugin did u install?
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
possum4 said:
I have HTC home, Pocket Plus, Spb Diary & Weather. Only Sips installed are the ones supplied with this rom revision.Yes it installed ok!
Click to expand...
Click to collapse
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
I have English Rom version O2 Xda Atom Pure! Calligrapher worked before on 0.3.0 and original roms. Just this rom won't work on!
try to install G4 SIP Tweak.cab make pcm keyboad as default SIP, it works for me....
download from here... http://forum.xda-developers.com/showpost.php?p=1424544&postcount=1
ogami_ito said:
It says in the notes that there are several IMEs (pcm Keyboard...I think CE star) which do not work. On another thread about Chinese IMEs, they noted that most are not working. This is, to me, the worst part about this ROM... I may need to go to another rom because for whatever reason, non-default IMEs are not working.
Well...they sometimes work right after a soft reset...and then fail.
Click to expand...
Click to collapse
Hi and thanks for your help and suggestions. I tried the software you suggested but it didn't work (with calligrapher). Thanks again anyway
possum4 said:
Calligrapher doesn't run on this Rom Ver. 6.0.7.0 Any ideas?
Click to expand...
Click to collapse
May I know what the version of this Calligrapher is? and where is the official site?
www.phatware.com I'm using current version 8.5
thanks!
possum4 said:
www.phatware.com I'm using current version 8.5
thanks!
Click to expand...
Click to collapse
if this program works..can u share to me this program and PM to me the Se**al..thanks
Jiggs I know you are busy however I'd just see if there could be any work arounds so I can run Calligrapher. I have tried the suggested "sip change" programs mentioned and also tried sk tools etc. Only if you have time of course! I'd be very grateful. Thanks again for your wonderful work
I have just tested the latest version of caligrapher on my new build. It works perfectly
Caligrapher is cool, but the application is large
I agree with Jiggs. Nice software though.
Could I help test the new build? Or is that too much to ask?
Calligrapher v8.5 works fine for me w/6M pagepool.
Calligrapher uses a LOT of memory. It seems to fail to run when you have too many today plugins (or a few using lots of memory). Here are the things to try:
1. Go to options and set Calligrapher to be the default SIP on reset.
2. Reset the device.
If it still doesn't work:
3. Disable ALL of your today plugins.
4. Reset the device.
If it works now, decide which today plugins you can't live without and turn them on one by one until Calligrapher stops working.
If it did not work, try SIPChange - http://forum.xda-developers.com/showthread.php?t=271008.
Good luck!
Hi guys,
I decided to upgrade my phone the other night, for no other reason then I like to fiddle and see what I can do with things =). WM5 worked fine, but I wanted to check out what WM6 had to offer.
So I download the official upgrade from the HTC member area ( http://www.dopodasia.com/Dopod_Aus ) and install as directed.
Everything went great, and I am pretty happy with WM6.
But after the upgrade, trying to start the camera brings up a dialog box with the error message "Unable to start camera. Unable to initialize Camera". This occurs if I hit the shortcut or run the .exe from explorer.
I downloaded the camera software but trying to overwrite the installed files using activesync yeilds an "unable to overwrite because files are write-protected" error, and attempting to write-enable the files is disallowed (the file just reverts back to write-protected, frustratingly).
I've searched these forums and others, and I can't find any answers.
Any help will be greatly appreciated.
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
VivaErBetis said:
I had the same problem when I pass from WM5 to WM6 because I try to restore a backup from my old ROM over my new ROM, thing that is impossible that works well due to registry and file incompatibilities.
I don't know if it's your case or not...
Click to expand...
Click to collapse
Thanks for the reply =)
Nope, im not restoring any backups or transferring anything else.
I have the same problem - no answer yet My original report:
http://forum.xda-developers.com/showthread.php?p=1393458#post1393458
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
sim
tigersim303 said:
The key thing is that reflashing to a known-good ROM doesn't fix it. What about in your case?
Click to expand...
Click to collapse
Hrmm.. I haven't tried yet, still looking for some sort of workaround or a software solution.
I'll try another OS tomorrow and let you know how it goes.
I also have this error, but...
...occasionally, it works when I do the following:
- Cold boot the device (no soft reset)
- Start the camera, but the screen will display noise
- Close the camera
- Start it again
- Second time, it will operate as expected
But funny enough, this trick doesn't work all the time...
I have friends and collegues that also upgraded and they don't experience this problem at all...
Same thing here... I bought 4 att 8525 units at ebay. they already came with wm6 3.57 from cingular.
3 units are working with no problems, but the camera stopped working in one of the phones.
I've tried everything (I think) , soft reset, hard reset, rom upgrade/downgrade.
A little of history ... so maybe some guru out there figures out what the f.. is going on:
1) The camera used to work fine.
2) Suddenly it began to fail saving pictures to the SC (sandisk 2gb) . All the phones have the same card.
If you choose to save to main memory, it worked.
3) The same day, the message "unable to initialize camera" started to show everytime I tried to start the camera application (4.0).
4) I tought it may be a failure SC, so I removed the SC, reset the phone but nothing changed.
5) Incredibly.... after then phone been turned off for a while... when I turned it on, the camera worked. Took a few pics... and the same error again!
6) Soft reset, hard reset.... nothing...
7) Updated SPL, radio and Rom (schaps 3.57) and the camera did work again!!!!! (with the SC in) .... after a few hours (no applications or skin applied) the error came back.
8) repeated those steps..... but no luck this time....
9) removed sim, sc and repeat steps.... no luck...
10 ) now, it is not working.... I tried coolcamera... but it does not start... tried camera 4.11... nothing... I went through the registry comparing with the other phones... everything is correct.
11) now I am thinking it is hw problem... but how is it possible that it works from time to time??????
Well... I almost gave up looking for a solution.... any idea would be great!
(what is a cold reset? )
thanks
fabian
Good news!!...
I just downloaded this cab that says it corrects SC bad management.
After installing the cab... turning off/on the phone... the camera works!!
(I don't know for how long it will work... but at least it is alive! )
Good luck and please share your experience with this cab !!
fabian
I can't believe it.... it worked for 2 hours... I did nothing with the phone... when I got the phone to send a sms, I tried again the camera... and it did not work!!!!!
(((
this is really weird!!
Well... this seems more like a "blog" than a forum .
Yesterday night I try removing the battery for 15 minutes. Then I turned on the phone and the camera started working.
I was really pesimist about the time it will keep working well... so I took pictures , recorded video, store them into main memory, into SC .. I really messed up with the camera ... everything worked well... tryed also Coolcamera application and took picture at maximum resolution (1600x1200 I think) .. everything Ok.
The camera is still working today... I did soft reset and it is still working... I'm trying step by step every action... synchronize.. wi-fi... phone... sms.. mms.. etc etc...and the camera still working...
I wonder how long will this work.. and what the hell does taking away the battery ???? Does it clean something in the ram ?
Any answer???
fabain
damn
I was really hopeful of this cab...
installed it and nada...
trying the battery trick (again) with this new cab installed to see maybe well just maybe...
fingers crossed
tehMope
Hey ya all,
Did a ROM upgrade
Schaps Pro New Very excellent to state the least!
Did a re-store (double dump move!)
Used SK Tools to re-store old backup of entire system (that was the double dumb move not the using the the fantastic SK Tools app!
Camera worked as well as a 2pixel can, but now get "Unable to start Camera not enough storage is available blah blah
So I did a search found a cab to a Kaiser link to rabidshare and tried to download 6 in a couple of days NO go on that,
http://rapidshare.com/files/97924716/Nadavi_HTC_Camera_5_0_4_2915_00_NEW_HTC_FIX.cab
Rabidshare doesn't finish download most every time I try on PC or phone!
Can anyone provide another link to download form please please!
So I tried another cab on this forum ArtemisSDeng and no go with soft rest.
Took battery and micro card out, 15 minutes (what-ever) no go on that either. . .
Have
Storage FREE 32.96 MB
Programs free 27.81 MB
So NOW what can I do besides buy a new Tynt and not restore old system restore over a NEW ROM?
Much help please?
where are updated cameras anyway?
I am currently running version 3.0 build 25498 HTC Camera on my Wizard with WM6 (NBD v9.2) ROM. Where can I find updated camera files. I tried a ROM once that had version 3.3 on it and it seemed to work better but I haven't found any standalone copies of the camera programs.
Anyone?
Can I use this cab for my HTC TYTN II (Kaiser) or its ony for Artemis ?
Hope this helps,
The reason that my camera messed up after installing a new ROM, is that I re-stored my device with a whole system restore!
This covered over the new upgraded settings found in the NEW ROM with old settings/ configuration !
SO I reinstalled the OLD ATT ROM (yuk) and BINGO camera works as it did before the undated ROM!
Now I going to reinstall the NEW cooked ROM, without the restore system and just hand install all my 6 apps, so I don't mess up the updated camera settings!
Maybe next week hopefully!
Hope that helps someone, so they can run a cooked ROM without messing up their camera!
Later!
madefree, you can restore all the old setup of your phone with SPB Backup ver2. It has an upgrade rom mode that doesn't alter the os at all but puts things back as they were on your old os. Today screen how you like it, any apps you've installed(fully regged). The only thing I've found was that for some roms I had to re-install the .net framework 3.5 as it DOESN'T alter the OS files. Well worth the money..
Cheers...
Thanks much ultramag69 for that info on the v2, as I was doing a flash on LVSW Edition ROM in about 20 minutes, so maybe dnload SPB Backup v2 and give it a try!
I just wish Sktools did that same type install, since I already bought that app!
Again thanks!
fix camera not initailize error (maybe)
ok not sure this will help every body but it work for me --- i'm running schaps 4.31 same problem after upgrading my 8525 any ways after weeks of try with cab , software , downloads I went to the programs them self and found out that if I disabled the camera icon setting in schaps config then soft reboot it works every time ( the icon actually is still there on today screen) been 2 days no errors before fix -- soft reboot use cam once errors till I reboted again hope it helps repost your findings might just be a freak incident
IF U HAVE FLASH LITE 2.1 DOWNLOD THIS CAB
http://forum.xda-developers.com/attachment.php?attachmentid=67948&d=1201644535
THEN INSTALL IT ON THE MAIN MEMORY , AFTER U INSTALLED THE CAB GO AND UNISTALL IT AFTER THAT FOLLOW THE NEXT STEPS.
FIRST OF ALL UNCHECK PROXY ENABLE FEATURE THAT IS ON SETTINGS, CONNECTIONS, , ADVANCE SETUP, SELECT THE NETWORK, MEDIA NET(IN THIS CASE ATT), EDIT, PROXY SETTINGS, AND DISABLE "THIS NETWORK CONNECTS TO THE INTERNET"
AFTER THAT, UPDATE YOUR REGISTER WITH THIS FILE
http://www.4shared.com/file/64178303/445d6758/20080808.html
THEN, install the opera it is better if you install the opera in the main memory here are the links
Install into main memory:
http://rapidshare.com/files/144273883/OBX-Opera_9.5.Build1957.WWE.cab.zip.html
Hardcoded intro Storage card:
http://rapidshare.com/files/144274089/OBX-Opera_9.5.Build1957.UC.SD.WWE.cab.zip.html
thanks to obalix who extracted this build from Omnia rom after the install is finish restart the device.
FINALLY, install flash 3.1
http://forum.xda-developers.com/attachment.php?attachmentid=111236&d=1220652288
thanks veyka for that and guys finally restart ur device and thats it. let know if somebody have problems with it thank u and enjoy it.
after that if it doesnt work do this, if it works leave it like that dont try to do this.
install Opera Build 2128 Upgrade: (Not Resloution Specific)
http://www.4shared.com/file/64047501/7a41c3e5/Opera_v95_Build_2128_Upgrade.html
If you get the keyboard popup bug with flash installed use the null keyboard cab found here
http://forum.xda-developers.com/attachment.php?attachmentid=111357&d=1220704344
if u didnt want to upgrade it, install build VGA 2128 - Full Install to Device Memory
http://www.4shared.com/file/64047605/7f6ab9a5/Opera_v95_Build_2128_VGA_WWE.html
Hi,
Tried, but does not work - at least for me ;( I am using irus 0MB pagepool ROM.
There was mentioned somewere in Athena forum that that this will only work with WM6.1 SW version higher then 20000??
Any suggestions?
Uros
link are dead!!
Working links and solutions to some problems can be found on the original thread:
http://forum.xda-developers.com/showthread.php?t=425268
yeap links are dea please post them here for downloading....
vkoulbal - see my message I posted just before yours. I'm downloading it right now.
So far so good. Keyboard issue when typing in an address has (finally) been fixed. The screen orientation problem has (finally) been fixed. Seems fairly fast. Scrolling is "progressive" now, which will take some getting used to (the spot under your stylus moves slightly faster up and down than your stylus is actually moving).
this build has several problems
1. Fonts overlap each other if large fonts are chosen.
2. it is impossible to enter text or select a link at zoom out mode.
The best version for me is 1184.
Also for me it was very resource hungry , though I did like the variable zoom
I haven't been able to get Flash to work, although the other thread says that Windows 6.1 builds below 20000 may have issues and mine (AP4) is in the 19000's. I guess I wait a little longer. Then we need a browser that supports Java...
eaglesteve, 1184 has been my choice for several months now. I've tried 10 builds, and 1957 is the first to fix the rotation and keyboard issues. It has its own new quirks but I think it will become my new 1st choice. Still can't log on to the web interface for Exchange like I could with 8.65, but IE is good enough for that, for now.
I can confirm that opera 1957 works with my rom build 19588 i have only tested it on youtube.com but it works pretty good
hi, uncheck proxy feature.
cerk2006 said:
Hi,
Tried, but does not work - at least for me ;( I am using irus 0MB pagepool ROM.
There was mentioned somewere in Athena forum that that this will only work with WM6.1 SW version higher then 20000??
Any suggestions?
Uros
Click to expand...
Click to collapse
hi, just uncheck proxy
techntrek said:
I haven't been able to get Flash to work, although the other thread says that Windows 6.1 builds below 20000 may have issues and mine (AP4) is in the 19000's. I guess I wait a little longer. Then we need a browser that supports Java...
eaglesteve, 1184 has been my choice for several months now. I've tried 10 builds, and 1957 is the first to fix the rotation and keyboard issues. It has its own new quirks but I think it will become my new 1st choice. Still can't log on to the web interface for Exchange like I could with 8.65, but IE is good enough for that, for now.
Click to expand...
Click to collapse
Hi,
dreynam2 said:
hi, just uncheck proxy
Click to expand...
Click to collapse
Could you please pinpoint where may the proxy feature be unchecked? Under connections or Opera or... ? I simply can not find it ;( I am using irus 0mb poolpage ROM.
irus said:
I can confirm that opera 1957 works with my rom build 19588 i have only tested it on youtube.com but it works pretty good
Click to expand...
Click to collapse
Can you explain what you did to get it working?
thx
Uros
dreynam2 said:
hi, just uncheck proxy
Click to expand...
Click to collapse
Wish it were so easy, but I always operate with the proxy unchecked. Did that a long time ago because under AP4 the weather app on the today screen won't work unless the proxy is unchecked.
cerk2006 - its under Settings > Connections > Connections
Note that for me, using AT&T in the US, I first had to go somewhere else (don't remember where) and switched from using the "Internet" connection to the "Media Net" connection. There was no proxy switch available when I was using the "Internet" connection.
cerk2006 said:
Hi,
Could you please pinpoint where may the proxy feature be unchecked? Under connections or Opera or... ? I simply can not find it ;( I am using irus 0mb poolpage ROM.
Can you explain what you did to get it working?
thx
Uros
Click to expand...
Click to collapse
well i removed flash 2.1 and reflashed my rom and it worked
techntrek said:
Note that for me, using AT&T in the US, I first had to go somewhere else (don't remember where) and switched from using the "Internet" connection to the "Media Net" connection. There was no proxy switch available when I was using the "Internet" connection.
Click to expand...
Click to collapse
yes, same here. Then I added the same connection again and proxy settings become visible. But, still no youtube... ;(
Uros
cerk2006 said:
yes, same here. Then I added the same connection again and proxy settings become visible. But, still no youtube... ;(
Uros
Click to expand...
Click to collapse
that might be 1 of the problems (not sure) but the real problem is that you have flash 2.1 cooked into the rom it need to be removed from the rom and reflash. i don't have time to do that but you can ask michy to do it for my rom and repost, i don't have a problem with that. I did not make my rom undumbable or anything stupid like that or you can get my kitchen and do it yourself.
irus said:
that might be 1 of the problems (not sure) but the real problem is that you have flash 2.1 cooked into the rom it need to be removed from the rom and reflash. i don't have time to do that but you can ask michy to do it for my rom and repost, i don't have a problem with that. I did not make my rom undumbable or anything stupid like that or you can get my kitchen and do it yourself.
Click to expand...
Click to collapse
Is it possible to remove it manually (clean files and registry)? I really would like to avoid reflashing the ROM since I have setup my Athena just right and I do not want to go through setup again if not absolutely necessary. Youtube is not a must, just would be nice to browse clips occasionally ...
uros
cerk2006 said:
Is it possible to remove it manually (clean files and registry)? I really would like to avoid reflashing the ROM since I have setup my Athena just right and I do not want to go through setup again if not absolutely necessary. Youtube is not a must, just would be nice to browse clips occasionally ...
uros
Click to expand...
Click to collapse
well from everthing i read you need to uninstall flash 2.1 before loading flash3 and since flash 2.1 is cooked into the rom there really is no other way. one thing i can suggest is using the sdconfig.txt file to load all of your apps, if you search, i have posted a how to on using sdconfig to load email settings and connection settings so on hard rest you don't have to do a thing but use your device. it might take a little reading and some time but in the end its worth it. hope this helps
Hi,
as I've switched to wm6.5 recently, i'm currently using my phone a lot... unfortunately, i also recognized, that i'm having strange problems since switching... after installing all my cab files and applying all my tweaks, etc. the OS will not launch any apps anymore, followed by not booting after a softreset, i have to hard reset. this is happening on any ROM so far, and i've tried letting several cabs i need out, however it still results in that kind of crash...
anyone having similar experiences? or is there a fix for this?
WM6.5 is not yet very stable, some crashes appear ramdomly as far as I can see too...
And I think some "old" stuff is not really compatible with it (I think there are more changes than the UI in 6.5)
Let's hope newer releases will correct thoses crashes...
Antubis said:
WM6.5 is not yet very stable, some crashes appear ramdomly as far as I can see too...
And I think some "old" stuff is not really compatible with it (I think there are more changes than the UI in 6.5)
Let's hope newer releases will correct thoses crashes...
Click to expand...
Click to collapse
hello there!
yep, i guess you're talking about normal "lock-ups"...however i HAD hardresets...
i was able to fix it by just reflashing the stock 6.1 rom, and then flashed back to 6.5 without switch radio... its working fine until now... i'm gonna report if i have any problems
I've noticed the same. When I go to File Explorer and My Device, it seems most of the files have been deleted, including the windows folder, and the remaining ones have been corrupted (they have names like b[]). If I try to restart the device it won't boot and requires a hard reset.
I've also noticed that this happens after I've synced with ActiveSync for the SECOND time.
EDIT: This issue does not occur with d_train's ROM.
Freezing keyboard
Hi,
With 6.5 roms (what I've been tested) my Niki100 freezes when I starting to enter a name (with soft keyboard) in the new mail/SMS address field. Hard keyboard works perfectly...
Niki 100 16keys
HardSPL 1.22
Radio: 1.71.09.01
Tested ROMs:
Salvy.C.83 v3.2 16keys
WM6.5 Lite ROM build 23007
Insomnia209G
Insomnia209L
NemanjaLO WM 6.5 23007
Anyone have any ideas?
Thx
Jules
I tried with WM6.1 and it freezes too. I think the Full QWERTY keyboard do this...
IBNick said:
I've noticed the same. When I go to File Explorer and My Device, it seems most of the files have been deleted, including the windows folder, and the remaining ones have been corrupted (they have names like b[]). If I try to restart the device it won't boot and requires a hard reset.
I've also noticed that this happens after I've synced with ActiveSync for the SECOND time.
EDIT: This issue does not occur with d_train's ROM.
Click to expand...
Click to collapse
well, these issues have stopped for me, after reflashing the stock 6.1 rom! maybe you should try that as well
after a few windows 7 roms and android installation i get my phone stuck when send/receive emails or openning a link via opera and i have to softreset using 6.5 and my ram is always free at 17% without any thing opened except cookie home tab ! and i removed so many tabs , my photo tab has the stock photos of htc , my people tab has nothing my internet has nothing too, have only one email set
i did task9 when went back to 6.5
Have you made sure that sneaky little downloads folder is emty in Opera? If not go to File Manager/Windows/Opera/Profile/Downloads and emty it. It is kind of a hiden folder. Also do a sesrch for cleanRAM and Clear Temp. The clearRAM app will force flose all apps that are idile and using RAM and the Clear Temp will allow you to clear other hidden folders that eat up memory.
i have clean ram and clear temp they saves not more than 1 mb by the first, and few kb by the second, i wonder where the 83% of ram goes.
dody said:
i have clean ram and clear temp they saves not more than 1 mb by the first, and few kb by the second, i wonder where the 83% of ram goes.
Click to expand...
Click to collapse
If you have cleanRAM and Clear Temp and have cleared everything this is strange. The only other question I have is do you have your text message settings for clear the deleted text message set to immidiate or manual? If it is manual all of your text messages are still on your HD2. Go to Messages/Menu/Options and it is at the very top of the screen.
T-Macgnolia said:
If you have cleanRAM and Clear Temp and have cleared everything this is strange. The only other question I have is do you have your text message settings for clear the deleted text message set to immidiate or manual? If it is manual all of your text messages are still on your HD2. Go to Messages/Menu/Options and it is at the very top of the screen.
Click to expand...
Click to collapse
thanks for your interest, i had one message inbox and 0 outbox , i just hard reset !
i even disabled manila to test ram and got 26% free as maximum is that rom or win 6.5 hd2 matter what causes stuck
how much ram you have free ... i have total 208 total and with manila and every thing disabled is 35 mb
which rom/hspl combination are you using.
3.14 roms will not play nicely with the wrong HSPL version causing an issue similar to this.
conantroutman said:
which rom/hspl combination are you using.
3.14 roms will not play nicely with the wrong HSPL version causing an issue similar to this.
Click to expand...
Click to collapse
3.14 hspl 8g xe
spl-2.08
you are probably right because before i had spl3
how to get back?
dody said:
3.14 hspl 8g xe
spl-2.08
you are probably right because before i had spl3
how to get back?
Click to expand...
Click to collapse
Just download HSPL4 and run it when you are promted for what SPL version you want to install select the version of SPL you want, make sure you choose the one with four zeros at the end this is the SPL the others are HSPL.
T-Macgnolia said:
Just download HSPL4 and run it when you are promted for what SPL version you want to install select the version of SPL you want, make sure you choose the one with four zeros at the end this is the SPL the others are HSPL.
Click to expand...
Click to collapse
there is no spl 3.03.0000 in ther ... just 2.0000
thanks i found it here http://www.jayceooi.com/2011/03/07/download-dft-hspl4-for-htc-hd2/
the one you put it was 3 not hspl4 but thanks alot
i got now 176 mb free ram = 52% and total ram 336 mb, thanks ALOT people for the guide
dody said:
there is no spl 3.03.0000 in ther ... just 2.0000
Click to expand...
Click to collapse
My bad man I typed in the wrong url for the link. I typed in the url for HSPL 3. Here is the correct link I will also fix my previous link as well. Sorry again
T-Macgnolia said:
My bad man I typed in the wrong url for the link. I typed in the url for HSPL 3. Here is the correct link I will also fix my previous link as well. Sorry again
Click to expand...
Click to collapse
got it thanks