Related
Hey, could someone please send me a link and explain to me how to install the TouchFLo on my MOGUL? It would be greatly appreciated. Thanks
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Thanks a lot! What extra does the cube add? Thanks
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Oh...sorry 1 more thing, once you download them onto your mogul what do you have to do to get them to work because I have tried something similar before and the files are on my MOGUL but nothing changed in apearance? Thanks again
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
kidnamedAlbert said:
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
Click to expand...
Click to collapse
thanks for the help
no problem
on that video it shows everything being saved to the memory card. How do you do that? because it always just automatically saves all my programs to the main memory? In that video, what is it even doing? Everything is going so fast I can hardly tell what is going on. Thanks
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
does anyone have anymore info? Thanks
dcshoeco024 said:
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
Click to expand...
Click to collapse
did you put the cube files in application data? thats they only way itll work
yea i put them there
this may sound stupid but did you enable touchflo?
what do u mean enable? Like, i downloaded it and it said that it was running.......
I really like Poorlyduck Vista cube
For me a stop having probleme with the WM 6.1 and cube when installing vista-cube .cab that also contain touch flo. I run and older version tha the one ''Vista suite'' I tried hard to make this in OEM package to include in option in DCD kitchen taht i customized a bit but for now i run it from cab version. ...
ok so i followed the instructions and set it up just like the vid, went back to the today screen and no different home screen. I went to choose touch flo, and it pops up as already running. Can someone help me please
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.
I have been using S740 for mainly GPS and I was wondering, is there any way to edit the applications that open up at start up?
I have Garmin Mobile XT for this phone so when ever I switch on my phone, I want this application to startup immediately.
I have searched google on how to but it couldn't help me. All I know is that I will have to play a bit with the registry in order to do that. I have Resco explorer with me so anyone can help me out?
Thanks
Application to edit startup : http://www.fewbits.com/startmgr/
You can just use any kind of file explorer and add Garmin's shortcut at the "startup" folder ( \Windows\StartUp )....
The best file explorer I can suggest you is "TotalCommander" : http://www.ghisler.com/smartphone.htm
Good luck
Thanks for the reply, sasiskas. I will try this out tomorrow and post how it performs
Great software, Startup Manager works great. I could add my program easily. Thanks again. But I am facing one problem. The SMS/MMS Window pops up after I switch on my phone. How do I remove that? And also I don't use a sim card for this phone so I also get a notification for SIM Failure at start-up. How do I remove that too?
"tmail.exe" is responsible for your sms/mms window...Try to find it using the program I told you...check everywere(when in the program press "menu"-startup/services/user notification)
As for the sim Failure I don't know...probably you will find it if you look in "menu-user notifications" in the program.
If you can't find anything there...then try downloading SKTools and go to "maintenance-windows startup"
Thanks again, sasiskas. But my ActiveSync says now failed to connect. Due to this I'm unable to install SKTools
Auzern said:
Thanks again, sasiskas. But my ActiveSync says now failed to connect. Due to this I'm unable to install SKTools
Click to expand...
Click to collapse
what did you edit?
If you go to communication manager-connection there is an option that allows your device to work as a flash drive..do that and then move the sktools.cab file to your device and then from the device execute it.
Hi all
I have been looking for answer, but without results.
I want to add my own shortcuts in manila today. What do I mean 'my own' you ask, i have a lot of programs installed on my storage sd card, and i dont want to install it all over again after changing ROM. For example i have installed garmin navigation and i don't want to install it again and wasting hour for that operation, I just want to add shortcut to manilla an pin it to today screen.
Please help me, I my explanations are not clear I will try to describe my problem better.
Thanks forward
misieq666 said:
Hi all
I have been looking for answer, but without results.
I want to add my own shortcuts in manila today. What do I mean 'my own' you ask, i have a lot of programs installed on my storage sd card, and i dont want to install it all over again after changing ROM. For example i have installed garmin navigation and i don't want to install it again and wasting hour for that operation, I just want to add shortcut to manilla an pin it to today screen.
Please help me, I my explanations are not clear I will try to describe my problem better.
Thanks forward
Click to expand...
Click to collapse
Sir, probably it's me but I don't get/understand it!? What do you mean with "Shortcuts to manila"?
- Manila files are image files. Do you wont to skin manila files
and you don't know how to start?
- Do you will personalize the shortcuts? the one you see in the start window and on the manila home screen?
Maybe you can give some more information, it will be easily.
You need a .lnk in your start menu to the program. I use sashimi to copy .lnks to programs (not requiring registry information) installed on the storage card to /windows/start menu/programs. You can also just do this manually. Once the .lnk is there, you can add the program to the quicklink on the hometab.
I use Resco Explorer. Browse to SD -> Program folder > Select and long press the program you want > Send to > Start Menu as Shortcut
Then, go to Home tab, select an empty quicklink and select the program
mwalt2 said:
You need a .lnk in your start menu to the program. I use sashimi to copy .lnks to programs (not requiring registry information) installed on the storage card to /windows/start menu/programs. You can also just do this manually. Once the .lnk is there, you can add the program to the quicklink on the hometab.
Click to expand...
Click to collapse
Thanks man ! that's what I'm looking for
Topic can be closed for now.
Thread moved to Q&A.
Hi
Recently inherited a Droid DNA that would like to use only for Audio & Video (No phone, Internet...)
Looked for a file manager app. Did not find any. Downloaded the man http://cache.vzw.com/multimedia/mim/htc-dna/HTC-DNA-UM.pdf and did quick search also nothing.
Is there a hidden file manager? If not appreciate suggestions how to install one.
Have access to a Windows 7 PC but wonder if 1st need to install a HTC Droid DNA driver?
Thanks
Ken
Update
Searched and found Verizon User Guide for phone http://cache.vzw.com/multimedia/mim/htc-dna/HTC-DNA-UM.pdf
Read entire guide, no mention of a File Manager.
Decided to check App Manager (which should have done 1st) and under All found listed Android File Manager v5.5.24..... (408 KB) and enabled.
Am wondering why it did not show on Home Screen, so rechecked User Guide.
Found p87 "Adding apps and other shortcuts on your Home screen" and followed instructions "1. Go to Settings, and then tap Personalize. 2. Tap Customize home screen. 3. Tap > Apps or Shortcuts. You can: ยง Swipe to browse through the apps or shortcuts"
Somehow All Apps never opened (only Apps already on Home screen).
Then tried "Tap to search for specific apps or shortcuts" when did this No Keyboard opened...
Please tell me what I am doing wrong.
Will add, since the phone had many apps disabled when I got it, am wondering if some necessary files are disabled?
Thanks
Ken