i just installed fission 2.4.3 for the droid 2 global. now, when i turn it on, it loops at the screen with the word android that repeated;y glosses over. it keeps looping through this animation. p.s. i have a clockwork backup but i really want this to work
Did you wipe cache/data? This usually happens when you don't wipe, so you should try wiping. Turn off your phone, then while holding x, turn the phone on to get into recovery, and in recovery wipe cache/data
Sent from my DROID2 GLOBAL using XDA App
I would suggest you restore your backup and try again, except this time wipe cache/data. I had the same problem too. However, I got into clockwork recovery mode by pulling out the battery during the M logo, not by holding X. Try whatever works for you!
There's no need to do it again. Wipe your cache and data and you should boot right up.
I had this same problem. It was because when installing the rom for the first time, I only deleted the cache when installing from the Fission ROM Manager, and not cache+data.
In the end I needed to re-SBF the phone, delete cache+data, root, install Droid2Bootstrapper & FRM, then follow the instructions properly
Can somebody delete this post? I hate vBulletin. It is extremely insecure, and doesn't have all the necessary features one would expect from a bb.
Related
can some one please help me, i root my htc eris and i install a rom but now the phone wont turn on, is stuck in the android screen.
i allready did a master reset, by holding VOL DOWN + SEND + END
I also can get in to recovery mode and i did a wipe date/factory reset, but is not working.
and when i try to do a RESTORE is telling me that there is no sd-ext.img
and no android_secure.img
can some one PLEASE help me. THANKSSSSsss........
In your recovery are you able to flash images? If so I suggest you download a ROM and try to flash it. That usually solves my problems.
Yea try reflashing a ROM, deleting everything off your sdcard, wiping factory data, davlik cache, and sd ext partition.
Wipe anything you can pretty much ha.
You should only really have to flash the ROM. I can't imagine how replacing the ROM wouldn't totally fix everything. Do a wipe first.
Also understand that it can easily take 5 to 10 minutes to boot for the first time after flashing a new rom let it sit for 20 then worry.
As long as you can hit recovery you haven't ****ed it up too bad though, that's a positive.
Nice i just run the RUU and now my phone wont turn on at all
So I recently flashed ICS 6.14.79 onto my Razr Maxx and was trying to install safestrap so i can play with ROM's and such. I install safestrap.apk, then click the app icon in my drawer adn install recovery. Once I rebooot I get the option on splash screen to tap menu for recovery. I can get into recovery, I can make a backup of my system before switching to safemode and everything works just fine. I can reboot my system at this point and it will boot up fine. I can either wait the 10 seconds or I can hit search and it will boot.
But if I go through the safe menu and enable safeboot or safemode or whatever its called... my phone will NOT boot. it will get to the splash screen, and if i wait it goes to a black screen and goes NO FURTHER. the only way I can get it to boot is to hold the power and volume up and down keys for about 20 seconds ad my screen will flash, then I can hold just the power and it will reboot and I can go back into recovery and un do the safemode and it will boot.
I made sure I am using (or trying to use) 2.0, I have never installed bootstrap, this was a fresh loaded phone, razr utility 1.6 to load .181, then combo ics installer 0.3 to install ics 6.14.79. Rooted with teh ics installer which used the motofail exploit, loaded my apps and tried to flash the BEATS update...
Help please?
When you toggle the safe mode your still in the recovery screen you need to wipe cache dalvik cache wipe data /factory reset and format system then install your new rom and gapps before rebooting otherwise there is nothing to boot up. At least that's how I'm reading your post . So your in non safe you have your backup toggle safe then before rebooting wipe data/ factory reset wipe cache format system then dalvik cache then install rom and gapps if not part of rom most are not.. 4-29-12 gapps Then you can reboot. Some people have problems with charger hooked up try without it. Hopefully this will help.
Sent from my NookTablet using xda premium
but Im not trying to load a new ROM, I am wanting to continue using the one I currently have, I just wanted to add Beats to it... so your saying that I have to flash a new rom, and that safemode will NOT allow me to use my current rom....
I think toggling safemode creates a second ROM so you can go back to your first one if you need to. So when safe mode is active it boots into the second ROM. If flashing beats there is no ROM to boot in to.
To flash beats I would think you shouldn't enable safe mode cause you want it flashed to your ROM instead of a non existing one. Understand?
This is purely from my little knowledge of Safestrap. I generally use Bootstrap.
Sent from my DROID RAZR using XDA
If you don't wanna flash any roms than you could just use bootstrap. If you wanna use bootstrap you must clear off safestrap.
1 reboot into safestrap and disable safestrap reboot
2 open safestrap app and select uninstall
3 go to system settings manage apps and unistall safestrap.
After you've done those steps than you could get bootstrap razr from the market and flash beats audio. I don't know if theres a way to install with safestrap in non-safe mode, it was setup to protect your orginial rom and only flash in safe-mode. maybe someone else could comment further.
Hi! I'm new to the forums and I have recently rooted my MB860 Motorola Atrix 4g with olympus.
Today I tried to install CM10 Avatar Rom : http://forum.xda-developers.com/showthread.php?t=2140902
I restarted my phone in Clockworkmod > install zip from internal storage > install
But after it restarts, it gets stuck on the Avatar logo with the sparkle circulating.
I tried wiping Delavik/cache/ and I even formatted the phone to factory settings.
Can anyone please help me?
Shaxxi said:
Hi! I'm new to the forums and I have recently rooted my MB860 Motorola Atrix 4g with olympus.
Today I tried to install CM10 Avatar Rom : http://forum.xda-developers.com/showthread.php?t=2140902
I restarted my phone in Clockworkmod > install zip from internal storage > install
But after it restarts, it gets stuck on the Avatar logo with the sparkle circulating.
I tried wiping Delavik/cache/ and I even formatted the phone to factory settings.
Can anyone please help me?
Click to expand...
Click to collapse
have u tried going back to stock
make sure if u flash the file again that u re-download it, the ROM might have not been downloaded correctly and therefore you are stuck on the splash screen
The problem is, i hadn't back up my previous rom before installing this one, therefore I cannot go back. Ugh i'm so newb >.<
However, is there a way to completely set it back to factory settings? I wipe /data/cache/Delavik/ back to factory setting but still after i restart it goes to the splash screen of Avatar ROM.
>.<
Shaxxi said:
The problem is, i hadn't back up my previous rom before installing this one, therefore I cannot go back. Ugh i'm so newb >.<
However, is there a way to completely set it back to factory settings? I wipe /data/cache/Delavik/ back to factory setting but still after i restart it goes to the splash screen of Avatar ROM.
>.<
Click to expand...
Click to collapse
It is always recommended to take a backup and full wipe (not just the dalvik cache) before installing a custom ROM. It is quite difficult to retrieve the data if there is no backup and the ROM is not booting. As of now the first thing I would suggest is to take a full backup using clockworkmod (at any stage you can recover this and come back to current state). Once the backup successful, try doing a wipe data/factory reset, then install the rom and see if it boots.
If the ROM boots at this stage, again take another backup in clockworkmod. Also someone on the thread has suggested flashing an older version of the rom first, boot and then flashing latest zip helps.
Then use the advanced restore option and try restoring data alone. If this is successful, you should most probably have all the data of all standard applications.
Also check this links http://forum.xda-developers.com/showthread.php?t=1163009 or stock-firmware and see if you can install the stock rom back with this.
Hi!
I have a problem with my LG Optimus 3D (P920). Installed the JellycreamV3 and it went good, untill everything was complete and I restarted the phone as instructed. Now my phone stucks at startup logo. Its been like that for hours but nothing happends? I have tried to restarted it several times without any resaults. Please help me. Its my first attempt to install new android version.
Perhaps your install was bad, try reinstalling it, or maybe you didn't clear the cache, system, data?
Sent from my LG-LS980 using xda app-developers app
- Boot into Recovery again
- Wipe data/cache and go to "Advanced" and wipe Dalvik (yes, this will delete everthing, but you don't exactly have a choice)
Reboot. If it's still hanging
- Boot into Recovery again
- Re-flash ROM
And BTW, didn't you make a backup of your original ROM? If not, well.. you won't go any places fast. Another tip is to go to the thread where you downloaded the ROM and ask for help there. People there have flashed the ROM, and some may have had the same issue as you have now.
I try to go into recover-mode but it just starts up and get stuck on the logo:S I did a backup but no matter how i press the buttons to access the recover-mode the phone just starts up and the LG logo comes up. Then its stuck there
I rooted my device a few days ago in order to stop the 4.1 ota update, I am currently on 4.0.4 and the device is an xt912.
Today I decided to install safestrap and after installing the recovery and booting into it, I backed up the stock rom.
After backing it up, I clicked on reboot to system.
The device then jumped into a bootloop.
So I cleared cache, dalvik cache, and even factory reset but it won't pass the DROID eye.
So I created a new slot and restored my early backup and to my suprise, it booted up.
I then rebooted back to recovery and cleared system, data,cache and dalvik cache of stock slot and restored the same back up there and rebooted, and it booted up nicely. But after that the recovery kind of disappeared. So I installed safestrap apk again and rebooted to recovery to make sure it flashed.
I was able to boot into the recovery but as I tried to boot back into the rom, I got stuck in a boot loop again.
My problem is if I reinstall the recovery, the device gets stuck in a bootloop, unless I wipe everything and restore my backup.
Also when turn off the phone and connect it to wall charger, the battery sign doesn't show up again.
Can u guys help me out??
Doesn't matter if I loose my stuff.
I just want a working 4.0.4 with root and to be able to charge the device when it's off.
(BTW my version of safestrap is 3.3.0 I think. Its 3 point something.)
I need help ASAP.
Sent from my DROID RAZR using XDA Free mobile app