can somebody help me about flashing back to official 2.1 for x10i? i am using freex10 rom 2.2.1 actually it is awesome and stable enough also faster . but i cant dualboot my phone only booting in freex10!!! also i didnt backup the official for recovery and whenever i connected my phone to pc companion to update it as a repair option, it always failed!!!
In google write somy ericsson update service download
then install and open flow the instruction
or simply flash to stock 2.1
Related
my phone keeps rebooting and cant read my sd card when i turn it on. Each time it reboots it runs the phone fine then 10 seconds later it reboots. I just installed CM 6.1.3 V 4.5.7 and was working great for a day. I installed busybox b/c my titanium backup wouldnt run for some odd reason. After that it kept rebooting and saying "Sorry! Process system is not responding." I cant run xrecovery or anything at this point. Can i flash with the V0.2.6 Flashtool. If so what do i flash? i have the .54 basebrand if that matters. PLEASE HELP
It's probably because you installed busybox. In thisROM you need not to install busybox and xRecovery as they are pre-installed. Their shortcuts have been removed.
You can flash back to the 2.1 SE and then try the CM6.1.3 v4.5.7 ROM out again.
can i use the same generic SE rom i flashed before
Have you made a backup of any previous ROMs using xRecovery?
If not, you can Flash back to the 2.1 SE ROM using SEUS. And then try the CM6.1.3 ROM again.
Yes i made a backup of CM 6.1.3 v01 gingerbread ROM. What can i do?
Go into xRecovery -> backup and restore -> restore... and restore your CM 6.1.3 v01 gingerbread ROM.
If it does not work, you can use SEUS.
sorry im not really up to par on what SEUS is. Can i just use the new flashtool and download the 2.1.435 SE version and flash that?
SEUS is Sony Ericsson Update Service.
You can use flashtool too.
okay im trying it out... THANKS!
Hi,
I have installed the Android GB 2.3.3 in X10i using SE PC companion software 2 days back. phone is working really fast, battery life improved. I have installed X-recovery and rooted my phone after getting the necessary guidance. the phone is rooted now and i can reboot into x-recovery.
I want to install custom ROM by WB-XPERIA TW Gingerbread V4.0.0. I have downloaded and copied the .zip file to my SD card. i rebooted in x-recovery, but when i update the custom.zip, it give me a error
" E: can't mount SD card
Installation aborted
please guide me on this as soon as possible
Regards
Uday
I think that maybe this is caused if you are not using the latest version of x-recovery. Wolf wrote about it at the the start of the thread under the installation instructions. You could try that. Someone else here might be able to advise you better...
Hi,
correct you need a GB ready xRec version. There is an update for the FlashTool which contain this new version.
Ralf
udayjani said:
Hi,
I have installed the Android GB 2.3.3 in X10i using SE PC companion software 2 days back. phone is working really fast, battery life improved. I have installed X-recovery and rooted my phone after getting the necessary guidance. the phone is rooted now and i can reboot into x-recovery.
I want to install custom ROM by WB-XPERIA TW Gingerbread V4.0.0. I have downloaded and copied the .zip file to my SD card. i rebooted in x-recovery, but when i update the custom.zip, it give me a error
" E: can't mount SD card
Installation aborted
please guide me on this as soon as possible
Regards
Uday
Click to expand...
Click to collapse
Search the forum for Xrecovery-GB ready.
Try this >>>>> http://forum.xda-developers.com/showthread.php?t=859571&highlight=xrecovery
unable to install custom ROM
GaryMick said:
I think that maybe this is caused if you are not using the latest version of x-recovery. Wolf wrote about it at the the start of the thread under the installation instructions. You could try that. Someone else here might be able to advise you better...
Click to expand...
Click to collapse
I already have the latest version of xrecovery 0.3, but still i am getting the same error.
I checked in some of the forums and I heard that we cannot install a custom ROM with rooted android 2.3.3. we need to flash android 2.1 and install this custom ROM which has got the latest kernel and baseband .71. Is that true, can anyone confirm it ?
Regards
Uday
udayjani said:
I already have the latest version of xrecovery 0.3, but still i am getting the same error.
I checked in some of the forums and I heard that we cannot install a custom ROM with rooted android 2.3.3. we need to flash android 2.1 and install this custom ROM which has got the latest kernel and baseband .71. Is that true, can anyone confirm it ?
Regards
Uday
Click to expand...
Click to collapse
I recommend flashing back to 2.1, extra step but it's worth it having the clean install.
What I did:
Flash 2.1 in Flashtool
Root 2.1 in Flashtool
Install Xrecovery in Flashtool
Reboot in Xrecovery
Factory reset
Wipe cache
Wipe dalvik
Wipe battery stats
Flash GB ROM
Do NOT reboot, remove battery to reset phone
Flash BB .71 in Flashtool
Reboot and ur good to go!
I haven't had any problems since I switched back to WB's new version
hhill13 said:
I recommend flashing back to 2.1, extra step but it's worth it having the clean install.
What I did:
Flash 2.1 in Flashtool
Root 2.1 in Flashtool
Install Xrecovery in Flashtool
Reboot in Xrecovery
Factory reset
Wipe cache
Wipe dalvik
Wipe battery stats
Flash GB ROM
Do NOT reboot, remove battery to reset phone
Flash BB .71 in Flashtool
Reboot and ur good to go!
I haven't had any problems since I switched back to WB's new version
Click to expand...
Click to collapse
I would go with this also if you are having problems. You can get the stock 2.1 ROM if you need it by searching for the Flashtool. The stock ROMs are on the same post (I cant add links here, sorry!).
I'm also on V4 of Wolfbreak ROM and it's the best one i've used so far!
I've installed, yesterday, the ROM CM7-ZMOD by ziduhu, without making a back up of my old ROM (the 2.3.3 by SE) and I'm wondering if there's a way to go back to it?
Just restore it with SE PC Companion.
Go to Support zone>Phone software update>Repait phone
I've re flashed it with flash tool 0.2.9.1 and ftf 2.3
Hi guys...This phones is driving me nuts.
Baseband 015 - Kernel 2.1.1.A.0.6
Stock Firmware 2.1 update 1..
Rooted(checked super user everything is fine) Bootloader Unlocked(S1_EROM FROM VER "r8A029)
Installed CMW and Xrecovery.. not at the same time at different times to see if one of them was the reason for my phone not booting.
OKAY.So my problem is the phone will NOT BOOT after kernel logo AFTER i install i custom rom (I am able to install custom roms an kernels successfully but phone does not boot up..).I TRIED ALOT OF ROMS.FROM GINGERBREAD TO PORTED ONES TO ICS.
So i know its not the roms fault its something wrong with the phone.
Extra info.Phone was t-mobile unlocked,also i have no simcard in this phone right now cz am using another phone,i have a 32gb micro sd formatted to fat32 from my windows 7.
when i use flashtool and flash back to stock firmware phone boots up fine...
If anyone smart is outhere that can help PLEASE help mee
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: