[Q] My X10 is dead? - XPERIA X10 Q&A, Help & Troubleshooting

Hello! I tried to make the latest update and although everything was going good suddenly appeared a false message! I pressed retry but always the same message! I took out the battery and tried again but nothing happened! I tried updatin through pc companion and seus, same message everywhere! I also tried to repair the software with above programms without mindin if i lose something but again the same! The only thing that my phone does is charging (light is green) and when i press the power on button it makes a vibration but nothing more! I called se and they told me to try in a differnet pc but again nothing happened! I 've taken out sim card and sd card also! Any more ideas to avoid se service?

try to reflash it with a different firmware, you can find em in the dev section along with the tutorials how to do it, this should work since u get ur green light on

I used flashtool, made the connection pressed flash and then i put the sin files! Then it says to power on my phone but i can't! Sorry but im not used to such tecnics! Can you pls help me on how to install the previous firmware i had before the latest update?

tiraklakis said:
I used flashtool, made the connection pressed flash and then i put the sin files! Then it says to power on my phone but i can't! Sorry but im not used to such tecnics! Can you pls help me on how to install the previous firmware i had before the latest update?
Click to expand...
Click to collapse
Read the how to flash tutorials.
Which flash tool?
Try SEUS repair.
What do you mean by "then i put the sin files"?
What was the flase message?

Well i found he solution! Here's what i did!
1) I used x10flasher.bat which i found in this forum wih the latest firmware
2)Then i erased the files from Crogram Files/Sony Ericsson/Update service/db/13740270/blob_fs
3)Run SEUS and everything was ok!
Thanks for your answers!

Related

help please ;( i think i bricked my phone

I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
Repair using SEUS.
it wont work. just says I already have latest software
Even if you have "the lastest software installed" you can reinstall it.
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
The new flash tool 0.2.5, will flash both 1.6 and 2.1. It works a little different, you will need to read through 1st.
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
soldiers33 said:
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
Click to expand...
Click to collapse
1. Try PC companion.
2. Read this guide.
You need to create the ftf file from the sin files, under advanced see bundle creation.
Read the how to.
pc companion wont work as I need to have usb storage but my phone wont even turn on. I have created the ftf files and now flashing, hopefuly it works.
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
soldiers33 said:
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
Click to expand...
Click to collapse
No you are not doomed. Calm down
1. Repair using SEUS (even if it says you have the latest software, reinstall it)
2. If that does not work, try PC companion.
3. If that does not work then use the flash tool. You can use the old version if the new one is not working out for you.
Before you do all of the above, take out the battery and wait 10 seconds. Then, reinstall the battery and try the SEUS. Good luck!
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
soldiers33 said:
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
Click to expand...
Click to collapse
OK. Then try the older version of the flash tool. You can find it here.
Does it also say install? If so, press that button. If that doesn't work install PC Companion and try that method.
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
soldiers33 said:
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
Click to expand...
Click to collapse
Glad it's sorted out. Take deep breaths now and enjoy your phone!

[Q] New member new phone (Now a big problem as well)

Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.

Fota unbrick

Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
it exactly for these files
is compatible with other firmware?
file (Xperia_2011_Range_FreeXperia_ALL.ftf) that function does?, I think that fixes an error
for all xperia range
Please can you explain better for neophytes, as I understand many do not
There´s not much to explain, this .sin and ftf files repair the damage bootloader and the trim area.
If you ´re unable to start phone after a fota update with unlocked bootloader.
Just plug the phone and connect it pressing back button in your xperia neo and press flash on the flashtool. And voila you have you phone live again.
Thanks, now if I understand it, since I have opened the bootloader release your contribution if you ever need it
regards
TNX
It works!!! TY!!!
It´s good to be helpfull man, fota brick is a serious issue. I´m glad to share this. Don´t forget to click on thanks buttom.
Thank you very much for this. It helped me to restore my brothers Neo that got screw-up after unsuccessful FOTA update.
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
arn01805 said:
Tried it on my MT15i NEO that got bricked after FOTA yesterday, but doesn't work for me.
I managed to get the 2 files flashed, after, i use wotan to restore latest firmware.
When I try to turn the phone on after this process, only red led flashes 3 times.
SEUS and SE Companion tells me I have software that isn't updatable.
Any other idea's to get my phone back alive?
Click to expand...
Click to collapse
If you flash the files and wotan recognises your phone and flash´t then your phone is ok.
Try to flash´t first with any 2.3.2 stock rom.
Just used wotan to flash 2.3.2 - 3.0.A.2.181 ROM, but problem stays the same.
After pressing the power button, only the led flashes red 3 times and nothing else happens.
Starting in flash programming mode is difficult too(the back button while connecting the USB). I guess 1 time in 50 tries I get a green led and flashing begins, other times it's just a quick red blink and unrecognised USB device.
I can't access the fastboot blue led mode anymore too (holding menu while connecting USB)
Are there some other options that I can try?
Edit:
Finally got it working after leaving the phone alone to the laptop for half an hour.. Phone just started to boot out of itself.. Very slowly.. it stayed on the SE boot logo for about 5 minutes. After restart and upgrade to latest stock with companion; it works okay again.
Thanks for helping me out!
I´m glad your phone is back, try to update it normally now to 2.3.4 and see if the blue lite is back.
Give us here in forum your feedback because this may be helpfull to other users.
I updated to 2.3.4 with SE companion software already and all seems to work okay!
Just tested the blue led/fast boot mode and it works again too.
This is the first and last time i'll do a FOTA upgrade without reading the forum!
Thanks again
testadeferro said:
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
Click to expand...
Click to collapse
works for me...
This is by far the best tool for all of us.
Great job and THANK YOU for this
My phone is back
P.S.after i use the first tool (loader.sin in my case) i made upgrade on wotanserver with 4.0.2.A.0.42 kernel 2.6.32.9 generic german 2.3.4 (it is only version woking for us)
DO NOT TRY UPDATE WITH PC COMPANION it will brick your phone again (only if you have unlockbootloader)
Thank you for this post! It saved my Neo after I tried the ICS rom...
It worked for me, thanks.
this just recovered a supposedly faulty xperia play off ebay http://www.ebay.co.uk/itm/160753314044?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheers
hello
i bricked my neo v by flashing a wrong kernel
i downloaded fota unbrick and opened flash tool. it says i should hold the back button while connecting the usb but when i do so the led becomes green. nothing else happens! the phone doesn't turn on, flashtool doesn't recognize it, and the screen doesn't turn on. the led just stays green!
help plz

[Q] X10 mini doen't start anymore and SEUS unable to restore stock kernel

Hello,
i tried to put minicm9 on my x10 mini. It has work but sim card is not detected.
After that, i made a big fault
I used s1tools to relock my phone (by restore button) in order to see if my sim card becomes detected
Now, my phone doesn't start (led blinks one time and vibrator and no more)
I tried to use SEUS to restore stock kernel but it says i have the latest release and no button to force
With flashtool, i can't flash another kernel because my bootloader is now relocked and i have nothing in pluging menu
Any ideas of what i can do to have my phone starting ?
Thanks and regards
Try this: http://forum.xda-developers.com/showthread.php?t=1376184
SmG67 said:
Try this: http://forum.xda-developers.com/showthread.php?t=1376184
Click to expand...
Click to collapse
Hello,
i have already try this but SEUS indicates that i have the latest version of software and no other possibilities offer by SEUS except "exit" button
i got a.ftf file of generic 2.1-update1 that you can flash with flashtool if you want
pm me
Disconnect your phone from your computer
in PC Companion, go into "support zone" choose update
It will say: phone not found and give you the repair option
vinscg said:
i got a.ftf file of generic 2.1-update1 that you can flash with flashtool if you want
pm me
Click to expand...
Click to collapse
Thanks, but flashtool doesn't work anymore because i relock the bootloader
SmG67 said:
Disconnect your phone from your computer
in SEUS, go into "support zone" choose update
It will say: phone not found and give you the repair option
Click to expand...
Click to collapse
Thanks, i tried also this manip with SE PC companion but as SE Update Service, it says that i have the latest version and no way to repair
If you disconnect your phone from your computer, it can't say you have the latest verstion because it cannot find it and it will give you the repair option.
Once you click that, it won't check for phonetype or software anymore, it will let you select a model, download the firmware and flash it.
SE PC Companion 2.1
SmG67 said:
If you disconnect your phone from your computer, it can't say you have the latest verstion because it cannot find it and it will give you the repair option.
Once you click that, it won't check for phonetype or software anymore, it will let you select a model, download the firmware and flash it.
SE PC Companion 2.1
Click to expand...
Click to collapse
Yes, you are right for SE PC companion
After select my model, at step 3 (update) when i plug my phone, a window opens with "no software available for your phone, try later" (in french with my se pc companion but i translate, well i hope)
very well translated indeed no problems there
just strange that it can't find a firmware for your selected device, does PC Companion connect to the internet? top right corner of main screen (PC Companion settings), proxy settings, test...
If that's ok, then i'm lost too, sorry
SmG67 said:
very well translated indeed no problems there
just strange that it can't find a firmware for your selected device, does PC Companion connect to the internet? top right corner of main screen (PC Companion settings), proxy settings, test...
If that's ok, then i'm lost too, sorry
Click to expand...
Click to collapse
yes, pc companion connected to internet
perhaps, if i could unlock again my phone with flashtool in order to flash a kernel...
but, plugin menu is empty.
No idea to force something to have plugin menu available to unlock ?
Nevertheless, thanks for your help
I have no idea, the unlock bootloader option is only available if you're on 2.1 (eclair) 2.2 (froyo) or 2.3 (gingerbread), and your phone has ICS at the moment, so that won't work i guess... i am really lost about your problem, I would think maybe try the repair a few more times, maybe SE had a server problem or something, but other than that, i don't know...
I wish you luck
one last thing...
maybe repair your phone with your sim-card removed may do the trick...
SmG67 said:
maybe repair your phone with your sim-card removed may do the trick...
Click to expand...
Click to collapse
tried with and without sim card, result is the same
Darn...
I've read somewhere that other people with french firmwares have trouble updating via PC Companion and things, maybe you could flash the nordic or uk firmware that is lying around on the forums here in de dev section and then try a repair after that,
You can flash firmwares with a locked bootloader, just not kernels. (sorry, i hate to see such a lovely little phone go to waste)
You can still select french as your language if it works...
http://www.multiupload.com/GM4VW1LNVV and choose the rapidshare link, the other ones are down...
SmG67 said:
Darn...
I've read somewhere that other people with french firmwares have trouble updating via PC Companion and things, maybe you could flash the nordic or uk firmware that is lying around on the forums here in de dev section and then try a repair after that,
You can flash firmwares with a locked bootloader, just not kernels. (sorry, i hate to see such a lovely little phone go to waste)
You can still select french as your language if it works...
http://www.multiupload.com/GM4VW1LNVV and choose the rapidshare link, the other ones are down...
Click to expand...
Click to collapse
Thanks a lot,
but could you help me again ? in your zip file, which file should i flash ?
Is it nordic or uk firmware that you speak or another thing ?
Regards
It is Nordic, but i don't think that will be a big problem
You unpack the .rar file and put the .ftf file into the firmwares folder found in the flashtool-installation folder
Start Flashtool - Press the flashbutton, choose the .ftf you just put in there and connect your phone in flashmode.
If the flash is succesful, turn off your phone and try a repair with PC Companion.
Fingers crossed...
SmG67 said:
It is Nordic, but i don't think that will be a big problem
You unpack the .rar file and put the .ftf file into the firmwares folder found in the flashtool-installation folder
Start Flashtool - Press the flashbutton, choose the .ftf you just put in there and connect your phone in flashmode.
If the flash is succesful, turn off your phone and try a repair with PC Companion.
Fingers crossed...
Click to expand...
Click to collapse
But there are not .ftf files in .rar file (amss.sin, amss_fs.sin, cache.sin, fota0.sin, fota1.sin, kernel.sin, loader.sin, system.sin, userdata.sin).
Should i rename a file with .ftf extension and in this case which ?
Thanks
Sorry, i found the possility to create firmware in flashtool with these files
After flashing, i success to update with pc companion (not with seus)
But i am again face to my original problem, the phone doesn't see the sim card (i tried with others sim card from different operators)
I don't know if you have an idea about this issue, but nevertheless, thanks a lot for your help
Try the steps in here, It may work..
Basically,
(I guess your bootloader is still locked, otherwise, lock it again)
do a repair without your simcard in your phone
do a full boot without the simcard
once it's booted, don't set up anything, but turn your phone off again
put your sim in, and reboot

[HELP]X10 Mini pro completely BRICKED.

Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help

Categories

Resources