Related
Dears I upgrdede to 2.2 and seems to work but most of the phone functions didn't work so I decide to down grade to original 2.1 again.
I went to download mode started odin and put the files and started but nothing happend so I unpluged the mobile and ended with the phone not working so I cant run 2.2 or 2.1 tryed to go back to 2.2 but still it starts on the odin and then stops.
can any one help?
What do you mean nothing happened? And this is the wrong section btw.
odin started to use the files and then stopped saying dont turn target off, and took so long as if it hanged
What version of ODIN are you using?
odin 3.1 .........
And which rom are you using? Make sure its the JDF one and not the JI6.
Have you ever used odin before? If not make sure you have the samsung drivers installed. If using vista or windows 7 open odin by right clicking and run as administrator. Then once its open put phone in download mode and connect it to the computer. Try again.
I think you mean Odin3 1.0
You need to upgrade to Odin 1.7 first of all, it can be found in this section in the Bible. Then like he said, grab JFD and the 512 pit file.
can you provide the links please to get the 4 fils PIT,PDA,Phone,CSC
I will be gratefull
You only need the Pit and PDA
Odin 1.7
http://forum.xda-developers.com/showpost.php?p=8863820&postcount=138
JFD firmware (put this as the PDA, it should be .TAR)
http://forum.xda-developers.com/showthread.php?t=739091
512 PIT:
http://forum.xda-developers.com/attachment.php?attachmentid=369220&d=1280422516
Make sure your phone is in download mode with the big yellow sign.
I will try it and let you know
Thank you for your help, it means a lot
alnasher76 said:
I will try it and let you know
Thank you for your help, it means a lot
Click to expand...
Click to collapse
What froyo rom did you flash? Did you flash it through recovery or with odin?
also as someone else stated, you should move this to q&a. While some will help you none the less, a few of people on here like the taste of freshly seared meat from time to time
Read the bible
Sent from my GT-I9000 using XDA App
Don't forget to flash a 2.1 kernel first.
SE7EN- said:
Don't forget to flash a 2.1 kernel first.
Click to expand...
Click to collapse
Flashing JFD through ODIN automatically replaces the kernel.
kangxi said:
Flashing JFD through ODIN automatically replaces the kernel.
Click to expand...
Click to collapse
Ah good to know because I flashed a kernel first lol..
I ended up with a bigger problem
I used odin to flas and added these files
s1_odin_20100512 pit
and T959UVJE8 PDA , Phone files and selected repartetion and started , it had 2.2 on it and was not working fine.
was installed and the restarted and there you go not working
Okay. So I pushed Axura final onto my phones internal sd card and booted into recovery mode. The damned Axura copy ( it downloaded properly via google chrome, no errors) had some issue with it and DID NOT install properly. I tried again and again to make it work, did not load flash from voodoo eclair 2.1 to axura which is 2.2.
Now I want to use ODIN and come back.
I get into download mode BEAUTIFULLY using youtubes """Samsung Vibrant download mode; Corntez" .
and then load Odin, load pit file, and the tar/jar file. detected as COM 6 Odin says "added" . then run it. RUNS perfectly. firmware update start; cache.rfs;modem.bin;factoryfs.rfs; and all, and the blue bar finished completely.
Then restarts, "VIBRANT" says "data wiping failed " , everything else succeeds...lots of small writing....restart' VIBRANT" ; then Samsung Galaxy S shiny logo.
Now.....the plot thickens and my vibrant does not move forward. Black, black screen.
If I touch the bottom touch keys---viz, home etc...they light up fine. But the screen. the beautiful screen, remains as dark as Lord Voldemorts heart.
What to do??
I forgot to mention that I moved from a forward port on my thinkpad to an aft port )); and the COM4 in ODIN changed to COM 6 , promptly.
Odin is causing some issues. seems like. Any suggestions and links for newer, better versions of the T mobile stock firmware.????
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
houston123 said:
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
Click to expand...
Click to collapse
Houston we have a problem. Voodoo MUST be disabled BEFORE you flash. There are plenty of info on the board on how to do this. Then ODIN to stock then FLASH. Not all ROM's need a lag fix, some just run smooth!
my phone is doing the same thing but all i did was hit the voodoo button that was available in the oclf app and it went dumb the women counted down and said complete after a while and then it stuck on the vibrant samsung screen. i flash with stock rom and now its doing what this guys phone is doing please help us
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
houston123 said:
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
Click to expand...
Click to collapse
For the dear love of [deity]/self-sufficiency, go read how to solve your problem
(You need to flash Eugene's "froyo that does not brick." Then flash whichever firmware you want.)
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
houston123 said:
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
Click to expand...
Click to collapse
http://eb-productions.proboards.com/index.cgi?board=samsungsgs
I have tried but doesn't work for me. Unfortunatly I too did not disable voodoo before flashing and now I am stuck and can not get into download screen. I guess I will have to take my stuff to a cell phone repair since I have ran out of options.
got eugenes software. Now I am going to try out this:
""""
ok so here is what you have to do:
1. download odin, froyo that doesn't brick, and 2.1 true stock
2. go to download mode, flash the pit and tar file from the froyo that doesn't brick (DON'T RE-PARTITION!)
3. it will boot into recovery and error out, DONT PANIC, that is what is supposed to happen
4. remove battery (from phone) and usb from phone and computer
5. put battery back in, access odin and download mode
6. flash the pit and tar file from the true 2.1 stock (RE-PARTITION THIS TIME!)
7. if done successfully, your phone software will like when you just took it out of the box!"""
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
houston123 said:
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
Click to expand...
Click to collapse
My opinion on this is not to worry unless it doesn't work. But since you know how to use Odin and your phone can get into download mode okay, it should work.
With the insurance there is a hefty copay. But you should be fine.
This thread has a similar issue to what im having, but ive branched off elsewhere...
http://forum.xda-developers.com/showthread.php?t=883944&highlight=Rom+Manager+partition+recover
The story: Ive had a rooted vibrant for a while. Im no linux noob, either. I was having some issues so i decided to try Darky's Toxic rom...worked GREAT! I made a clockwork backup...now i felt it safe to start to play.
I was having media scanner issues...so i decided to repartition my storage spaces (and to get rid of the avatar movie)...but i used ROM manager...clearly by mistake. whoops.
So after MUCH trouble with boot looping...i was able to ODIN to Eugene's Froyo that doesnt brick. The STOCK rom wouldnt give me video...just hung after the Galaxy S boot seq. Im assuming thats a voodoo issue?
Anyway...able to get Eugene's on there...and i was smart and made a back up of both storage spots. I reloaded CWR, and tried to restore to the backup of Toxic i made with no luck. Matter of fact, i cant get any other ROM to load that ive tried.
Any suggestions to get my restore point back up and running? I thought about trying to go stock...but like i said, i couldnt get to stock through ODIN.
Couple of Ideas........ I am assuming you can get into download and recovery.
If you can get into recovery, clear cache, wipe dalvik then, pull battery and get into download, then try odin back to stock, remember to check repartition.
Or try Heimdall, sometimes it works when Odin does not. But if you can get into download then, there is a way (or some combo of ways) to get you back to stock. Just be patient and logical......... you will get it..........good luck
I CAN get into download and recovery...and was able to get CWR back on...thankfully.
I have tried every combo of wipes i can think of.
If i flash to true stock 2.1...i get black screen with lit buttons.
If i flash to Eugene's...i can boot into a ROM build with no internal storage, therefore no way to install apps.
I just came across this and tried it...with no new results.
Fix 1:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
I'll try your suggestion now...thanks!
Still no luck. Same thing...black screen, with lit buttons.
Did i officially brick this thing?! haha...i thought it barely possible with the vibrant.
I tried flashing the JI6 rom too....still no go.
Anything?
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Same problem
I had this exact issue two days ago and after many attempts with Odin, like you, the only ROM I could load was Eugene's. Re-Partitioning with Odin had no affect, stock wouldn't work and wiping everything had no affect. With Eugene's it would show no space for apps and wouldn't hold any settings if the phone was rebooted. It seems that clockwork mod is actually removing the apps partition and no tool I could find would actually recreate it. I searched quite a bit and found several posts all with the same issue and in every case they had to replace the phone. Luckily I am still under warranty so T-Mobile is replacing it. I don't know if the Clockwork Mod developer has a thread on here, but that "feature" needs some work or it needs to be removed.
kadashti said:
When you Odin to stock, what tar are you using? When you repartition, do you use the pit file?
I suggest that you use the JFD Odin image and repartition using 512.pit. I have also heard of some people having more success with Odin when they dont have an SD card or SIM card in the phone (this may be an old wives tale.) Good luck.
Click to expand...
Click to collapse
Yes, ive used both the vanilla JFD tmo tar, and the JI6 tar. Neither worked. Triend both the 512 and the 513 PIT file. 512 for the first HUNDRED times...then 513 for the hell of it, since at this point, i was getting nowhere.
And thanks pamulli, thats what im basically resigning to..i just needed to hear it from another person.
REMINDER: It is as easy as fat fingering the keyboard to totally screw your phone. Click carefully!
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried to install twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
galannyc said:
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried installing twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
Click to expand...
Click to collapse
Yeah download mode IS the bootloader that is locked... sorry buddy but you either turn it in hoping they don't notice your screw up or use it as a paperweight
Sent from my SCH-I545 using xda app-developers app
galannyc said:
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried to install twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
Click to expand...
Click to collapse
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
Click to expand...
Click to collapse
THANK YOU SO MUCH!.. The funny thing is I had downloaded "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" already in my trials and tribulations. Probably the one I downloaded was corrupt because this one installed with a breeze. The one located on that site worked instantly. Now if we can just get that bootloader unlocked. I wish was a programming genius sometimes, I would unlock it; then take that ransom and donate it. Thanks again
Just wanted to say thanks. I was able to use that link + Odin3 to get my friend's Verizon Galaxy S4 back to normal. Best Buy and a Samsung rep at the store were unable to handle this lol
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "where to download the firmware for galaxy s4?" right below that you should see sch-i545 and it also have a note to it, download that zip file "sch-i545_vzw_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on odin.
Click to expand...
Click to collapse
oh my god ur a life saver
?
Just a quick question, when installing that zip with ODIN, do you just use PDA?
Stijntje09 said:
Just a quick question, when installing that zip with ODIN, do you just use PDA?
Click to expand...
Click to collapse
Yes. Make sure that auto reboot and reset time are checked. Load the zip/tar using PDA and let Odin do its thing.
thank it work with odin
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
Click to expand...
Click to collapse
I brick my verizon galaxy nexus and now thank to this im working agains thank
Hi, ad the title says i've bricked my player
I was on cm12 and tried to flash stock ROM from odin
I fkashed two times, the first one i got a bootloop, the second one the device got bricked :crying: , i can't do anything, it won't turno on or go into download mode :crying:
Please hekp me!
I've found a guide which tells about a program called unbrickble rezurrector, but i can't find the jar...
PLease help me i miss my player :crying: :crying:
Do you think that a USB jig will do the trick?
edoardog said:
Hi, ad the title says i've bricked my player
I was on cm12 and tried to flash stock ROM from odin
I fkashed two times, the first one i got a bootloop, the second one the device got bricked :crying: , i can't do anything, it won't turno on or go into download mode :crying:
Please hekp me!
I've found a guide which tells about a program called unbrickble rezurrector, but i can't find the jar...
PLease help me i miss my player :crying: :crying:
Click to expand...
Click to collapse
To power your device all the way off plug it in and hold power until the battery logo comes up.
Then unplug it and hold power, home, and volume down to boot into download mode.
Use odin (https://www.google.com/url?sa=t&rct...=ewT0JrvKAjyPbAfN2FyCTQ&bvm=bv.91071109,d.eXY) to flash the stock firmware form here:
http://forum.xda-developers.com/showthread.php?t=2192488
Androprise said:
To power your device all the way off plug it in and hold power until the battery logo comes up.
Then unplug it and hold power, home, and volume down to boot into download mode.
Use odin (https://www.google.com/url?sa=t&rct...=ewT0JrvKAjyPbAfN2FyCTQ&bvm=bv.91071109,d.eXY) to flash the stock firmware form here:
http://forum.xda-developers.com/showthread.php?t=2192488
Click to expand...
Click to collapse
hi, I've managed to make it boot into recovery by using unbrickable resurrector... now i've got another problem, I can't flash stock rom :crying:
I've followed adam outler guide to recover from a brick, but odin won't flash on the player! it just says SetupConnection..
<ID:0/004> Can't open the serial(COM) port! I can only make it go to download mode, and if I unplug it from the pc it shuts... I don't know what to do!
i don't think that the drivers are the problem, i can flash on my galaxy tab 3...
edoardog said:
hi, I've managed to make it boot into recovery by using unbrickable resurrector... now i've got another problem, I can't flash stock rom :crying:
I've followed adam outler guide to recover from a brick, but odin won't flash on the player! it just says SetupConnection..
<ID:0/004> Can't open the serial(COM) port! I can only make it go to download mode, and if I unplug it from the pc it shuts... I don't know what to do!
i don't think that the drivers are the problem, i can flash on my galaxy tab 3...
Click to expand...
Click to collapse
My player has sometimes had this problem with Odin 3.07. It has always worked fine with Odin 1.85 however. I have attached the Odin zip just extract it and run. If it still doesn't work try installing Samsung Kies (or re-install) to get the USB driver. Should that fail install the samsung mobile USB Driver (also attached).
Kies Link (Use Kies 2.6): http://www.samsung.com/us/kies/
Androprise said:
My player has sometimes had this problem with Odin 3.07. It has always worked fine with Odin 1.85 however. I have attached the Odin zip just extract it and run. If it still doesn't work try installing Samsung Kies (or re-install) to get the USB driver. Should that fail install the samsung mobile USB Driver (also attached).
Kies Link (Use Kies 2.6):
Click to expand...
Click to collapse
ok, thank you very much for your help
i managed to flash stockrom but the player won't turn on i don't know what happend
after it ends flashing it just shuts, it won't rebot... i don't know
edoardog said:
ok, thank you very much for your help
i managed to flash stockrom but the player won't turn on i don't know what happend
after it ends flashing it just shuts, it won't rebot... i don't know
Click to expand...
Click to collapse
I'm in a similar situation (bricked after cm12, no recovery, have let the battery die, gathering info on what to do next).
Here's a total guess, maybe the repartitioning for the cm12 is messing up the stock rom (did you have "repartition" checked in odin?) have you tried flashing cm11 or 12 instead of stock?
Also if this doesn't work try flashing with the pit file which can be found lower down on the same post as the stock ROMs.
TheRealBubba said:
I'm in a similar situation (bricked after cm12, no recovery, have let the battery die, gathering info on what to do next).
Here's a total guess, maybe the repartitioning for the cm12 is messing up the stock rom (did you have "repartition" checked in odin?) have you tried flashing cm11 or 12 instead of stock?
Click to expand...
Click to collapse
Hi, each time i flash in odin i check repartition and load the pit file...
how do I flash CM11 or CM12? I can't put it in recovery...
I think we are in the same situation, i was thinking... can't we make a CM11 or CM12 flashable tar file? i don't know if it's possibile, i'm a newbie and know only a little of android and similar OS...
uff, if the galaxy payer could only boot in recovery we could be able to flash one rom to fix it!
sorry for my bad english
edoardog said:
I think we are in the same situation, i was thinking... can't we make a CM11 or CM12 flashable tar file? i don't know if it's possibile, i'm a newbie and know only a little of android and similar OS...
uff, if the galaxy payer could only boot in recovery we could be able to flash one rom to fix it!
sorry for my bad english
Click to expand...
Click to collapse
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
TheRealBubba said:
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
Click to expand...
Click to collapse
I'm going to try to flash that, thank you for your respond... Windows can be relly slow in seraching driver, linux is a lot faster XD, yesterday i tried to flash my galaxy player from JODIN3, which is basically ODIN for LInux, the problem is, after it ends, it says SUCCESS!! but the player won't boot... Maybe the battery is dead this happens everytime I flash the pit and stock rom, ODIN says success but then it shuts, giving no life signs
This is a really strange problem even I tryed to flash everything (from kernels, to recovery, to stock roms and the bootloader which posted AdamOutler) we need to ask to an experienced dev what maybe has happend, ecause i relly have no idea
edoardog said:
I'm going to try to flash that, thank you for your respond... Windows can be relly slow in seraching driver, linux is a lot faster XD, yesterday i tried to flash my galaxy player from JODIN3, which is basically ODIN for LInux, the problem is, after it ends, it says SUCCESS!! but the player won't boot... Maybe the battery is dead this happens everytime I flash the pit and stock rom, ODIN says success but then it shuts, giving no life signs
This is a really strange problem even I tryed to flash everything (from kernels, to recovery, to stock roms and the bootloader which posted AdamOutler) we need to ask to an experienced dev what maybe has happend, ecause i relly have no idea
Click to expand...
Click to collapse
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
TheRealBubba said:
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
Click to expand...
Click to collapse
Thank you very much! I'll try and flash, I'm curious to see if this one works! downloading right naw!!
TheRealBubba said:
I'll look into JODIN3, messing around with Windows is so painfull. I would skip flashing the pit, just odin the one thing. I've also found that if odin fails flashing something, everything else I try flashing afterwards will fail. The only success I've had has been with disconnecting everything, plugging the device back into the PC, the starting odin new.
I've gotten a working gingerbread ROM, from here:
http://meticulus-development.com/index.php/galaxy-player-5-0-2/galaxy-player-5-0-stock-roms/
(irritating finding the download link among all the malware bull**** and "windows support" popups, it required registering for 4shared, but a throwaway email works)
The recovery is still a native samsung android 3e, and it took me a while to figure out that the "select" key wasn't the power button, but the home softkey... That might have been true of the last one I had flashed, the one that bootlooped, maybe I could have wiped... anyway. I've got a working gingerbread GP5.0 I can give my daughter (if I can avoid the temptation of putting cwm and then cm11 on it).
Click to expand...
Click to collapse
Actually it didn't work DDD: whatever thank you very much for trying helping me, I think I need to change the entire device XD, but i was thinking... maybe if I install the usa rom on my INTL do you think that it may work, i've read that it works but the home button won't be recognized... dunno
I'm gonna try, as we say in italy, rotto per rotto, I will try and install
edoardog said:
Actually it didn't work DDD: whatever thank you very much for trying helping me, I think I need to change the entire device XD, but i was thinking... maybe if I install the usa rom on my INTL do you think that it may work, i've read that it works but the home button won't be recognized... dunno
I'm gonna try, as we say in italy, rotto per rotto, I will try and install
Click to expand...
Click to collapse
Hmmm, I think the US/Intl might not be super important, since all you really want is to get a working recovery on there. I got one of those GB roms on, then was able to flash cwm. I don't think you need to be able to use the rom, but installing it make odin able to flash cwm. Once cwm was on I installed the cm11 xip and all is good.
Good luck with yours.
TheRealBubba said:
Hmmm, I think the US/Intl might not be super important, since all you really want is to get a working recovery on there. I got one of those GB roms on, then was able to flash cwm. I don't think you need to be able to use the rom, but installing it make odin able to flash cwm. Once cwm was on I installed the cm11 xip and all is good.
Good luck with yours.
Click to expand...
Click to collapse
I still have the same results, the player won't boot after finishing flashing... oh well, thank you very much for your help
Maybe i'll buy another one, it's a very cool device
TheRealBubba said:
I couldn't get mine into recovery either. I couldn't even get proper download mode. But, I used odin3 v1.85 (I also tried kies, and re-installing that may have installed drivers that turned out to be necessary, windows spent a lot of time searching for drivers... I'm a linux guy, I don't really understand how/why windows needs to spend 10 minutes searching for the same drivers again and again - whatever), and tried flashing lots of things, assorted pit files, roms and recoveries...
Eventually I managed to install a stock rom that I got from the first post in this thread:
http://forum.xda-developers.com/showthread.php?p=39188127
It installed correctly, but booted into an animation bootloop.
I cannot flash cwm on to it. When I boot into recovery I get the (stock?) android 3e recovery, and a screen full of red telling me that cache does not exist. None of the four options, reboot, install update zip from sd, wipe data/factory reset, wipe cache, do anything.
Stuck there now.
Click to expand...
Click to collapse
If the stock recovery is not working try flashing a CWM recovery for the GB ROMS.
For the Intl Player with the hardware button this one should work
http://forum.xda-developers.com/showthread.php?t=1414565
You need the Odin file to flash then recovery should work.
Do a cache wipe, factory data reset, and wipe the Dalvik cache.