Hi guys I need help to downgrade my rom 3.12 with spl 3.03 on my htc hd2 to 1.66, but i don't know the process to doing this.
Somebody help me?
thanks
DFC said:
Hi guys I need help to downgrade my rom 3.12 with spl 3.03 on my htc hd2 to 1.66, but i don't know the process to doing this.
Somebody help me?
thanks
Click to expand...
Click to collapse
Just find the original stock ROM from your aria/branded device. And install it.
There are some stock Rom's here: link
For example if you're stock ROM is now the 3.14.405.2 the older one for the same aria is: 1.66.405.2
DFC said:
Hi guys I need help to downgrade my rom 3.12 with spl 3.03 on my htc hd2 to 1.66, but i don't know the process to doing this.
Somebody help me?
thanks
Click to expand...
Click to collapse
Why would you want to downgrade?
Just simply find the correct stock rom (the older stock rom version), download it, connect your phone to PC using active sync or window mobile device center, run the downloaded file. That's it
Good luck
i downgraded my htc to 1.66 nice, i installed the hspl 2.08 nice again, but i intalled o magldr 1.12 and now when i turn on my htc, appear htc screen and stop right here :/ don't continues and boot anything
please help me :X
DFC said:
i downgraded my htc to 1.66 nice, i installed the hspl 2.08 nice again, but i intalled o magldr 1.12 and now when i turn on my htc, appear htc screen and stop right here :/ don't continues and boot anything
please help me :X
Click to expand...
Click to collapse
Have you installed the LEO70 ROM yet?
While in MAGLDR screen, select "USB Flasher" (to select, you can use volume button, and to confirm you can use the Green button/the phone call button), then RUN the LEO70ROM from your PC (while connected with your PC).
READ THE FOLLOWING THREAD (AT LEAST POST NO.1) FOR THE DETAILS PROCEDURE :
http://forum.xda-developers.com/showthread.php?t=912416
the above procedure is the same if you wanna flash any NAND Android.
Good luck
silverwind said:
Have you installed the LEO70 ROM yet?
While in MAGLDR screen, select "USB Flasher" (to select, you can use volume button, and to confirm you can use the Green button/the phone call button), then RUN the LEO70ROM from your PC (while connected with your PC).
READ THE FOLLOWING THREAD (AT LEAST POST NO.1) FOR THE DETAILS PROCEDURE :
http://forum.xda-developers.com/showthread.php?t=912416
the above procedure is the same if you wanna flash any NAND Android.
Good luck
Click to expand...
Click to collapse
no, because magldr don't start, only i can start the screen red,green,white and i can connect with usb but i can't flash the rom to back to official rom.
edit: finally i can back to official rom, i have unnistalled hspl and installed official rom, but i had try again install hspl and work, but magldr no :/
Related
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
mrachni said:
Please help me,how can i remove SPL 3.03
I`m using Artemis v44.0 which goes with ROM 3.14....
I want to removed it and go back to 1.43.000
Click to expand...
Click to collapse
Reinstall previous stock ROM.
But how? Where to find it?
I must do that from SD card if i understand?
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
No, you can flash it over ActiveSync.
About stock ROM; with aria ROM do you have? do you have a branded device?
SPL - 3.03 and ROM 3.14... Affecting installation for W7?
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Innvizible said:
I have noticed that I have the same problem with my HD2 6.5
I have on it:
SPL-3.03.0000
ROM version - 3.14.405.2 (04666) WWE
What my main concern is however, is whether you think it's possible for me to install Windows 7 on this model or do I have to go to an older ROM and SPL version to achieve this.
Any help greatly appreciated thank you
Click to expand...
Click to collapse
Ass for I know, to be able to install WP7 ROM on your HD2 you will need HSPL. And probably you know it already, but stock ROM 3.14 isn't compatible with HSPL, so yes you need to downgrade your stock ROM before.
mrachni said:
But how? Where to find it?
I must do that from SD card if i understand?
Click to expand...
Click to collapse
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
similar problem on my HD2
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
tazeemn said:
To get back to your original SPL, you will need to do it using SD card method. If you use Activesync method, it will only upgrade the SPL and won't downgrade.
Click to expand...
Click to collapse
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Innvizible said:
Thanks for the heads up, I did as suggested before...
So..
1. I got ROM 1.66 with Radio 15.30.50 from HTC forum and installed in order to downgrade my ROM
2. After that I flashed HSPL2 and selected SPL-2.08.HSPL
(After this it showed phone was hacked successfully and after it rebooted I can't get past the hanging white screen)
3. I *ignored this* then switched off phone and got into boatloader again and ran MAGLDR112 and the RUU loaded up to 100% and booted up but again it still hangs at the white screen stopping at the htc logo. That's when I thought probably step 2 was where I had hit a problem...
4. After a couple of attempts I decided to put it back to the 1.66 I got from HTC forum so I can use phone for the meanwhile
- I have been following the threads, and a lot of people seem to suggest that the white screen is something to do with having the wrong radio version. (Do you share the same thoughts or have I gone completely wrong elsewhere in your opinion?)
- And if it is a radio issue which do you think goes best with the MAGLDR112 and LEO70-ROM
- If someone could paste a link I'd be happy to follow it up
[Starting to feel like one of those people forum heads are not fond of for not reading and understanding enough]
Click to expand...
Click to collapse
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
kurt-willems said:
Not right sir, even if you install stock ROM over ActiveSync it will upgrade and also downgrade your SPL version.
Click to expand...
Click to collapse
You are right about that. I stand corrected. This was proven through my tests yesterday. In the past, with my Athena, it worked differently.
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
2.07.50 also worked fine for me for WinMO 6.5 (Energy), Darkstone SuperRam 1.5 and WP7. In fact WP7 NAND & Darkstone from SD ran fine with MAGLDR112.
Updated Radio solved problem
kurt-willems said:
Stock ROM 1.66 have radio 2.07.51 integrated; but Android builds needs minimum radio 2.08.50 so before you install Android upgrade your radio.
Click to expand...
Click to collapse
Worked like a charm. I put on Leo_RADIO_2.15.50.14** from one of the threads and from then on I then put back SPL-2.08HSPL and then loaded MAGLDR112 and it allowed me to access bootloader and from there I loaded the DWI file for Windows 7. Everything became kinda self-explanatory after following your help... Awesome, Windows 7 rocks... Off to activate the live services...
hey everybody, i have a problem with the istallation of the magldr.
i go into the bootmanager ( this red-green-blue colored screen) and then i run the romupdate.exe, the black htc logo appears and the progressbar stuck at 0% for about 10 minutes, then i get an error on the pc and the programm starts the recovery tips
anybody who can help me?
before i had :
-magldr 1.11
-mdj gingerbread 2.0
-16gb sd card by SanDisk
-german hd2 ( bougt at vodafone)
i have simular problems. I can install ot, but when i hold down power button nothing happend.
i have: flashed stock rom
flashed newest radio 2.15.50.14
then flashed magldr 1.12
then im stuck any one knows?
I had the same issue. Make sure you are using HSPL 2.08.HSPL and not 2.08.0000.
I have 266 connection error... doing same as described
Have you started ROMUpdateUtility.exe as Administrator ?
uxu said:
Have you started ROMUpdateUtility.exe as Administrator ?
Click to expand...
Click to collapse
I already administrator on PC (Windows XP)
abhavananda said:
I had the same issue. Make sure you are using HSPL 2.08.HSPL and not 2.08.0000.
Click to expand...
Click to collapse
where do i get the version without the .0000 in the end?
thx, i hope this will help, will try it when i find the download =)
edit: aaaaah, got it, will try it now ^^
thx, it worked
im using hspl 1.42, your saying thats the problem?
Nakazul: maybe this helps you?
I had 1.42.HSPL before I flashed magldr, too.
So what I did to get 2.08.HSPL was:
1. flash the second latest stock-rom (not latest because latest is too new) by putting leoimg.nbh on the sd card, then boot and flash from SD with bootloader (to get rid of 1.42.HSPL ad get back to 1.42.000)
2. flash HSPL, where I was able to flash to 2.08.HSPL
3. flash MAGLDR 1.11
and everything works.
I'm lucky, i have SPL-3.03.0000 ...
... and, of course, magldr 1.12 don't work (0%) and HSPL3 is only for 2.xx
Someone have some idea ...?
Thanks
Capppo said:
... and, of course, magldr 1.12 don't work (0%) and HSPL3 is only for 2.xx
Someone have some idea ...?
Thanks
Click to expand...
Click to collapse
just flash the second latest official rom for your leo then you will be able to install HSPL.
cant install magldr 1.12
the SPL version on my Hd2 is 1.66.0000 XE
it tried to install HSPL2 but it says
Critical error
Flow: 00000003
Error Code:00000004
Description: Bad model ID.
What should i do.
Please help me anyone.
kiki1987 said:
the SPL version on my Hd2 is 1.66.0000 XE
it tried to install HSPL2 but it says
Critical error
Flow: 00000003
Error Code:00000004
Description: Bad model ID.
What should i do.
Please help me anyone.
Click to expand...
Click to collapse
HSPL3: http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Hopefully that will solve your issue.
I own a new HD2....and now i think i bricked it.
I installed HSPL3 on my device and then MAGLDR113 but after reboot nothing happened just white screen and green htc logo
I tried to uninstall HSPL according to manual stated in you tube but loading got lost just after a blink.
My phone is showing this info in bootloader....
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0x05
CotullsHSPL 0x50
PLeaseeeeeeee help me out.....i beg all
look at my post sounds like mine
check out post 9 in this thread sounds like mine http://forum.xda-developers.com/showthread.php?t=961001
not sure if you are tmous tho you may want to start with your shipped or test masd 2.02 rom
As far I can remember, all tutorials said that hspl can be just "uninstalled".
The only way to get rid of hspl (and maglr at once) is to flash original rom
BUT FROM SD CARD.
Tutorial how to do that is in the "sticky" (third sticky in this subforum) section.
or better still, finish the process you started. . . apply a rom.
you cant just "apply hspl, apply magldr" and then stop, you gotta enter magldr and flash a wp7/android rom.
also, if you still have the original radio that shipped with your phone, it wont be high enough version to work.
enter bootloader and flash something like radio 2.11.50.x or higher.
This is not an error or fault at all, just plain user failure.
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
jeetu1981 said:
Did you try to flash stock rom? If activesync is not allowing it, then you can try it booting your phone in boot loader mode. But make sure you flash stock rom only.
Alternately you can flash via sd as mentioned by "rtomakov"
Thanks
Click to expand...
Click to collapse
Flashing stock rom via usb wont remove hspl!
so dear, you need to know this first...magldr will install in rom replacing your wm6.5......so after you do that you need a nand android build or wp7 to use with magldr or if you want wm 6.5, no need to remove hspl, just reflash the stock 1.48 wwe rom for india...search for that in the forum...this will replace the magldr..........just be sure not to flash the new stock 3.14 wwe rom over hspl..it will produce incompatibilities like small memory....if you want 3.14 rom, first flash stock 1.48 wwe, and then using hspl, uninstall hspl (select 1.42spl )...then install 3.14 wwe rom (be sure to flash india specific roms)
rtomakov said:
Flashing stock rom via usb wont remove hspl!
Click to expand...
Click to collapse
Right, but it will atleast flash a stock ROM, HSPL can be removed later
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
parkarintl said:
Thank u ol for helping me out.
Pblm solved I installed new 3.14 rom as it olso upgraded my radio and magldr run after boot successfully.
Now I m using windows7
Click to expand...
Click to collapse
That's good to hear. WP7? I flashed it yesterday and then switched back to WM in just 15 minutes, not my cup of tea.
Thanks
First of all i`m not a developer i`m a simple user of a HTC HD2 and i need your help guys cuz i`m in panic!!!!!!!!!
The story sounds like this, i installed Android on my phone, then it gave me errors cuz of the old radio. Then i decided to upgrade the radio to 2.15, and i decided to flash back my wm 6,5 to be able to sync it with windows 7 and make the radio update and i downloaded the img from this post http://forum.xda-developers.com/showthread.php?t=681317, i started the loading process and it suddenly stopped saying some errors appeared, not when i start it writes "Software update failed, please try again" red green blue white...
I`m in panic, what should i do!?!!
You have not bricked your HD2, and seeing as you have not posted back here in a several hours you may have solved your problem.
Just go to htc.com and enter the serial number of your HD2 and download the ROM from there then fllash it either by SD or RUU (USB).
helpp
let me tell you the whole thing.
first i had windows 6.5 on my htc hd2 t mobile .
i shifted to android 2.2 through the instructions available at xda forums.then i wanted it to convert to android 2.3 but i couldn't find any way so i planned to downgrade to windows 6.5 n then to android 2.3.
i followed the above old link that i mention in the first post to downgrade to windows 6.5 but wen i loaded the boot-loader it said update rom error.since then i only see the colored screen.i tried many roms but all say the same thing that rom file corrupted.but if i use different leoimg.nbh extracted from the stock rom ,the installation process doesn't starts and keeps on stuck at the o% level
help me out plzz
Re apply hspl which has probably gone, then flash rom over USB.
When I flashed 1.72 trying to restore stock, (yes correct rom) I got software update failed until I used hspl.exe to change spl to 1.xx from 2.08.hspl, dunno why it wouldn't take, but it wouldn't until I changed spl.
ignore this comment if you have a tmous, don't try installing 1.xx spl on a tmous.
re:help
when i try to install hspl it says u must have spl 1.42 but i am having 2.08 on my fone how shud i go to 1.42?
the only thing i can see on my mobile is the bootloader screen
That's hspl1 you are trying, use hspl2
can u give me the link to download HSPL2 .thnx
i wanted to tell that i am running 512 leo rom...
n sorry but can you tell me the whole process step by step..
i em really in an mess
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
samsamuel said:
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
Click to expand...
Click to collapse
Did you forget you have HSPL 2 linked in your sig, lol............
T-Macgnolia said:
Did you forget you have HSPL 2 linked in your sig, lol............
Click to expand...
Click to collapse
edit - dunno what my last reply meant, , stoned, tired, yea i had forgot, and i missread your post