Stuck after upgrade!! - Sony Ericsson XPERIA X10 Mini

Hi,
I have rooted my device (x10 mini) in 1.6 without any problems then made the upgrade to 2.1 without unrooting the device.
Now i am stuck notihng works to root the devise again, i used almost all root application available and none of them was able to root.
Z4root quits after 1 minute , x10root stuck in "wifi on" .
Super one click keeps looping even when i truned of the usb debugging as adviced in the tutorial.
I need your help guys...any suggestion???

downgrade it seems to me that is update is not rootable yet

repair the phone.

Related

unable to root after upgrading to 2.1

Hi,
I have rooted my device (x10 mini) in 1.6 without any problems then made the upgrade to 2.1 without unrooting the device.
Now i am stuck notihng works to root the devise again, i used almost all root application available and none of them was able to root.
Z4root quits after 1 minute , x10root stuck in "wifi on" .
Super one click keeps looping even when i truned of the usb debugging as adviced in the tutorial.
I need your help guys...any suggestion???
you should try get help in the x10mini forum (http://forum.xda-developers.com/forumdisplay.php?f=723)
maybe you can try to root with flash tool
http://forum.xda-developers.com/showthread.php?t=920746
matar44 said:
Hi,
I have rooted my device (x10 mini) in 1.6 without any problems then made the upgrade to 2.1 without unrooting the device.
Now i am stuck notihng works to root the devise again, i used almost all root application available and none of them was able to root.
Z4root quits after 1 minute , x10root stuck in "wifi on" .
Super one click keeps looping even when i truned of the usb debugging as adviced in the tutorial.
I need your help guys...any suggestion???
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=825664
from your sub forum.

[Q] superoneclick has had me off big time

i used s.o.c to root my streak. it said waiting for device for about an hour so i gave up and unplugged it. after that it popped up ''root sucsessful'' it started acting up so i wanted to un-root. used i universal androot and when i try to unroot it fails everytime, will please some one help me? its driving me nuts! thanks
Try using the older version. I believe it's 1.5.1 that worked for me. I had to turn off my phone, start the root process in SOC, and then startup my phone and it connected and rooted my streak successfully.
It failed for me as well. I chose the "rageagainstthecage" exploit and it succeeded.

[Q] Impossible to root Galaxy 5 (GT-I5500)

Hello! I'm new here and I searched for a similar thread but I didn't find one so don't sweat me with the search posts and read the whole post before commenting...
So, I tried to root Galaxy 5 (GT-I5500) which runs Android 2.2 and it just looks impossible. Programs I tried to use are Super One Click, z4root and Universal Androot.
Problem with SOC is that it stops responding after 2 messages appear:
Killing ADB Server...
Starting ADB Server... daemon not running. Starting it on port 5
After this it stops working... (Have the drivers for the phone and ADB stuff installed!)
The problem with z4root is that after "Acquiring root shell" my phone vibrates and just kicks me out from the program with no messages/warnings.
Universal Androot (1.6.2 b5) Says it's unable to root and that's it.
It seems that this phone has some kind of protection because I saw many other people unlocking this phone with all 3 programs I mentioned.
I got this phone from VIP SRB and I heard that if you buy a phone with contract like I did, they will somehow lock it to make it almost impossible to root.(I guess it's not impossible, that's why I'm asking you guys)
So my question is how to crack that protection that this phone has (If it has one) and how do I finally root it.
Same problem for me....
I have the same problem and posted a thread a couple of days ago.
I had already rooted my i5500, but I had a problem with titanium backup that I installed on it...it ended up stuck in the loop screen when I pulled the battery on it. I couldn't get the phone to do a factory restore by pressing whichever buttons I needed to, so I had to flash another rom, using Odin (latest one, i think...the phonebase is WJP4) to it and use backup to restore apps and setting etc..
I now can't root it using the same methods you have and get the same error messages. Although with Super One Click it gets to stage 3 of rooting and then it's as though I have pulled the USB cable out, so it can't finish the root
I am going to flash an older rom to it and see if that has any effect...I want to eventually put a custom rom on it!!!
this worked for me...
After my last post here I tried reflashing a stock rom to my i5500 to see if that was the problem and it didn't, still had the same issues as you did.
My success came when I used Unlock Root 2.2. You have to install it on your computer and enable USB debugging on your phone (as with SuperOne Click) but it worked without errors!
I hope this method works for you (I think it would have worked without me reflashing my phone), let me know if it works
Worked OK!
chrisbrawn said:
After my last post here I tried reflashing a stock rom to my i5500 to see if that was the problem and it didn't, still had the same issues as you did.
My success came when I used Unlock Root 2.2. You have to install it on your computer and enable USB debugging on your phone (as with SuperOne Click) but it worked without errors!
I hope this method works for you (I think it would have worked without me reflashing my phone), let me know if it works
Click to expand...
Click to collapse
Hi Chris, I just did as described in my wife's 5500.. it took me less than 5 minutes, thanks a lot! Now looking for a better ROM than the stock 2.2.2, any hints?
All the best!
edugreen said:
Hi Chris, I just did as described in my wife's 5500.. it took me less than 5 minutes, thanks a lot! Now looking for a better ROM than the stock 2.2.2, any hints?
All the best!
Click to expand...
Click to collapse
Hi guys, can u please provide a clear download link for that program u used. Thank you
looking for answer
i have same issue but did not find any solution

[Q] Rooting android 4.04 allview P5

Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova

[Q] Alcatel OT-918 (TCT Move 2) cannot root anymore.

All right, I have a question... I have tried a root method for Alcatel OT-918 from your forums, and it worked... but after some time, I turned my phone off and then it would suddenly go to Android screen and restart itself and then go to Android startup screen and do the same, it caught in a loop, although it had worked for weeks after I rooted in... anyway... I sent it to repair service and they said that only thing they did is upgraded software as suggested by manufacturer. Now when I try to root my phone using FlashTool and a given scatter file for my android I simply can not, it says "Can not find USB port." Although I have all the drivers installed and everything is working properly... nevertheless, when I tried to install alternative usb_driver, I got an error saying "no device tree"... Anyway, I really need a solution and find out why is this happening...

Categories

Resources