hi so i messed up my phone using titanium backup and tried to revert back to a save spot with rom manager but that didnt work so i used odin to get back to 2.1 and it worked fine but now it keeps saying my sim doesnt allow connection i thought updating it to 2.2 would fix it but it didnt the specs are
SGH-T959
firmware 2.2
base band version t959uvka6
kernal version 2.6.32.9
build number froyo.uvka6
help plz ty
bump anyone havent had a phone since i really need this fixed plz help ty
get a new sim card?
i dont think it matters because i used my brothers card and it still doesnt work and i can also use mine on other phones
I had the same issue on mine for a while dunno why. Tmo rep said my phone is bouncing between towers. Going in the settings and manually setting a tower our reboot usually fixed out but not always. It could also be the towers. If that doesn't work replace the sim and lastly thee phone if it comes to that. I noticed older leaked froyo build caused this issue for me.you could odin to stock root and flash a current rom such as KA7.
Sent from my SGH-T959 using XDA App
+1 on new sim card happend to me too , is your brothers phone same carrier cuz if u stik at and tee card in there it wont read it unless u unlocek your phone
Try flashing a new ROM ..should work.
Sent from my SGH-T959 using XDA App
but if u have old sim card like i had because tmo store forgot to give me new sim card with new vibrant when i bough it the old sim lasted no longer than two weeks after goin bad i dont kno why but it did i went back to store and they gave me new one and told me i should of gotten the new sim in the first place with the phone wheni bough it and my sim wasnt that old any way oh and it went bad when i started flashing roms allot lol
i have tried going into wireless and network settings and manually searching for network operators and it keeps saying my sim is not registered. Also i just flashed bionix v no luck and it doesnt matter which sim card i use because i used just about everyone i knows sim card which works in their phones. At this point not sure what to do ill probably revert back to 2.2 or 2.1 and unroot and take it to the tmobile store.
I am same problem here everytime try to make call it says "Not Registered on the Network", SIM card works fine on different phone, also other SIM when inserted on Vibrant gives same message.
Can someone help resolve this situation.
Thanks,
Related
hi all
please i have problem ,the is not network in my phone (no signal)
am change the mobile but the same problem, am try to use manual search for network when i find it n try to connecte to it , its say u can not register to this network, and am type the secret code in virgin mobile which show me to which network am connect its say you r not rigester to network
any one have experiance in this type of problem?where is the problem exactlly in my sime card or in the network comapny (virgin)
regards
peo306 said:
hi all
please i have problem ,the is not network in my phone (no signal)
am change the mobile but the same problem, am try to use manual search for network when i find it n try to connecte to it , its say u can not register to this network, and am type the secret code in virgin mobile which show me to which network am connect its say you r not rigester to network
any one have experiance in this type of problem?where is the problem exactlly in my sime card or in the network comapny (virgin)
regards
Click to expand...
Click to collapse
1. Has this situation been occuring since the beginning? I mean , have you ever connected to the network?
2. Is your phone simlocked? If not , I'd suggest you to check if another sim card (preferably another company) works properly. If works , try changing the sim card first.
No Network
Hi,
Im also struggling with the same problem, its most frustrating being without the fundamental function of a mobile phone. Im on O2. It all started when 2.1 updated on my X10, since then my phone doesnt connect to O2 network.
Ive tried removing the sim, cleaning etc. then putting back in.
Tried swapping my sim with a friend (same network), no problem with the sim.
Just tried re-booting my phone (re-updating), no joy.
The last resort i guess before sending it in to O2 is to throw out of the window?
Any ideas?
Thanks
p.s. new HD camera does nothing but 'force close'.
thx for replay
my phone unlocked n and am try another simcard with another company its woks n am check my sim card in another phone its not work
first am got update (change region nomber method) befor 4 days ago n its work with me after update without problem but yesterday am not there is no network
i feel like my sim card banned from virign network so i don't know where is the problem in my sime card or in virgin network but am not feel i have problem in my phone coz its work with another sim card n my sim not work in another phone.
nomis26 said:
Hi,
Im also struggling with the same problem, its most frustrating being without the fundamental function of a mobile phone. Im on O2. It all started when 2.1 updated on my X10, since then my phone doesnt connect to O2 network.
Ive tried removing the sim, cleaning etc. then putting back in.
Tried swapping my sim with a friend (same network), no problem with the sim.
Just tried re-booting my phone (re-updating), no joy.
The last resort i guess before sending it in to O2 is to throw out of the window?
Any ideas?
Thanks
p.s. new HD camera does nothing but 'force close'.
Click to expand...
Click to collapse
Have you checked the APN settings?
Tony_C said:
Have you checked the APN settings?
Click to expand...
Click to collapse
ANP setting concerning when u don't have 3G connections not the main signale
up.....up.....up
peo306 said:
thx for replay
my phone unlocked n and am try another simcard with another company its woks n am check my sim card in another phone its not work
first am got update (change region nomber method) befor 4 days ago n its work with me after update without problem but yesterday am not there is no network
i feel like my sim card banned from virign network so i don't know where is the problem in my sime card or in virgin network but am not feel i have problem in my phone coz its work with another sim card n my sim not work in another phone.
Click to expand...
Click to collapse
I remember somebody had problems with new iPhone and old original ATT SIM-cards. ATT just gave a new SIM-card - it was a kind of incompability. Maybe you should go to Virgin tech guys and ask them to fix the problem.
I have strange thing with my phone when it was locked - I used old proxy-SIM and it worked fine with 1.6, but after I flashed it up to 2.1 it worked around 16 hours and eventually told me that there is no service - just like yours. Nobody had similar experience, but look like strange things are possible with those really smart phones. After unlocking - no problems for now.
Che Kirila said:
I remember somebody had problems with new iPhone and old original ATT SIM-cards. ATT just gave a new SIM-card - it was a kind of incompability. Maybe you should go to Virgin tech guys and ask them to fix the problem.
I have strange thing with my phone when it was locked - I used old proxy-SIM and it worked fine with 1.6, but after I flashed it up to 2.1 it worked around 16 hours and eventually told me that there is no service - just like yours. Nobody had similar experience, but look like strange things are possible with those really smart phones. After unlocking - no problems for now.
Click to expand...
Click to collapse
me too i think i have problem with my sim card, am already contacted the service clients but not solution till now !!!!!
i think after update, x10 will made variation of m-voltage which supported to sim cards, so directly burned( if the variation of voltage related with used area of sim-cards ,that's depends on our operators)
peo306 said:
me too i think i have problem with my sim card, am already contacted the service clients but not solution till now !!!!!
i think after update, x10 will made variation of m-voltage which supported to sim cards, so directly burned( if the variation of voltage related with used area of sim-cards ,that's depends on our operators)
Click to expand...
Click to collapse
I don't think, the X10 can damage SIM-card since SE always targets world market and takes in attention any regional differences. Virgin is not a real carrier, it is a mobile virtual network operator (MVNO) and uses Orange network as an underlying carrier. The last resort is to claim that you lost you phone (with the SIM card, of course) and ask for replacement. They can charge you (I used to pay $25 for T-Mobile USA in the nearest dealer shop, but didn't do any research since I needed the phone badly).
There is another possibility - as I know, ATT automatically changes the plan for their subscribers to a data-plan that is obviously more expensive as they recognize the new phone as a smartphone. It is weird practice, but see - it is possible, so be sure what's going on with your carrier.
please help me with network problem
i was trying different roms to flash, it was not good enough for me after with recovery i restore my backup original rom but no network, no signal, the sam problem with other roms, i changed sim cards as well no signal, when i make phone call there is a message ( CALL NOT SENT, PLEASE DIAL AN EMERGENCY NUMBER)
PLEASE HELP ME TO BRING BACK MY PHONE
i think you restore you old rom with wrong Baseband so try to search in xda you find which is the match baseband to ur old rom thats all
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Did.you use software to unlock it or just a code?
Sent from my MB860 using XDA App
just a code
crnkoj said:
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Click to expand...
Click to collapse
I have the exact same problem.
My phone is unlocked and can make calls, but WiFi disconnects me almost immediately. The phone also thinks my prepaid sim has H+ connectivity.
When I go back to my AT&T SIM, I have to do a reboot or 2 to get it cleared up, and then WiFi works again.
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
crnkoj said:
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
Click to expand...
Click to collapse
i also have a friend in saudi arabia who got the unlock code and the wifi is working fine.
only 2 people reported this so far. i guess it could be a hardware problem ? because the other user beside you have this problem even without sim installed " or that what i understood from him "
you can check the other thread too. maybe someone could post something usefull.
hmm i see, where did you find that thread, i was sort of searching for ages and didnt find any issues like that =/
Ye i mean i have this problem without a sim aswell if i dont factory restore the phone, after i do that without a sim card however the WiFi works great...
so i am kind of reluctant to believe it being a hardware issue due to this, sort of software specific issue (at least i think if it would be hardware related, the wifi would start working as soon as i go to airplane mode/take out the sim and a factory reset wouldnt be necessary), or do you think that my theory is rather flawed in thinking that?
and ye the problem is im in europe now and as the reps at motorola support told me, i would have to send the phone to the US for warranty and they would only send it back to an address within the US =/ i will try my luck with the german and uk support site, to see if they could do something for me.
thanks for your time guys tho
hey guys what do you think if i would use this code:
* 2767 * 3855 #
Think before you give this code. This code is used for formatting the original manufacturer. This will delete all files and settings, including internal memory storage. This will also reinstall the phone’s firmware.
To restore it to manufacturer (will it request an unlock code again after that?) cuz i have 2 codes to unlock but the first one worked, so maybe if i woudl try it with the second one than?
I just unlock my atrix with the code from cellunlock, works great and wifi is fine as well. Would like to know where u get the code, and how it turns out if u try reset to default using the combo. Pls update. Ths
Sent from my MB860 using XDA App
I'm having the same issue of not being able to connect to WiFi.
I bought the phone in Las Vegas with an AT&T - pay as you go (no contract).
I bought an unlock code from SwiftUnlocks, and used my Rogers SIM, which appeared to work. I then rooted the phone.
Using the Rogers network, I've been unable to use any sort of data. Phone calls and texts work fine. Then I noticed that my WiFi was not working properly. It would try to obtain an IP address, but couldn't connect. After several reboots, I got the phone to connect to WiFi for a few minutes.
I just did a factory reset, now I'm unable to connect to any network or WiFi to login with MotorBlur, so I can't really use the phone now.
I'm quite frustrated and not sure what else I can do.
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Squig80 said:
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Click to expand...
Click to collapse
i am getting my phone in few hours, then i am going to order from cellunlock a code and wait for 2 days to get the lock. unless someone has a spare code he can pm me i would be thankful.
the code is IMEI specific, cant give oyujust spare codes
secondly, to get wifi to work you have to remove your sim card, put in the att or a nonworking sim card and do factory reset, than wifi will work. and you can load all the stuff via wifi, and than just put in your working sim and use the phone as a phone +3g data (the 3g data works great for me to be honest)
oh i got my code from swiftunlock but i dont think that matters, they all get it from teh same provider im pretty sure.
and if anyone si wondering t he sbf update did NOT fix my wifi problem. i ahve tried several wifi fix programs and neither worked aswell, the fxr wifi did some stuff that the phone now sees the networks but still cant connect.
this is to update everyone that i got the phone. had an issue about the screen doing lots of flickering. contacted amazon and sent it back.
in the whole process so far i lost around 60$ between importing and exporting the phone. all in all. i will stick with my iphone 4 for now. its a good phone.
but i cant take this sadness all over again if i imported another phone with an issue with it as well. i am too OCD for my own good.
so true what you say, tho im coming form a nokia 6220 classic, a bit older than the iphone 4
Hey GUYS...
I have the same problem.... My Bell Atrix WiFi works great with my Rogers SIM (I had someone unlock it for me), but when I put in my Qatar Qtel SIM, it stops working, and goes into that connect/scan/disconnect loop.
Any solutions?
Search in the dev forym there is a solution for it
crnkoj said:
Search in the dev forym there is a solution for it
Click to expand...
Click to collapse
Thanks. Found it: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
help mine stoipped working
[16:53] <arana> hi guys i need help with an unlocked atrix 4g att , that was ulocked with att code, then in order to use recovery i got one of the files here http://forum.xda-developers.com/showthread.php?t=1204500
[16:53] <arana> now it is unlocked but wifi is stuck at obtaining ip address
[16:53] <arana> i tried the solutoin here: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
[16:53] <arana> but still not working
[16:54] <arana> i'll appreciate any help
[16:56] <arana> if possible i would like to put the stock recovery partition if that would fix things, or unlock it with official sbf but i can find it
[16:56] <arana> i used zomgunlock-lite.sbf to unlock
any help?
my carrier is telcel (mexico) and wifi was working fine before i "unlocked" the phone, thank you for any help
Hello all,
I have had no data connection in the last few days. solid signal, but no data. i have done almost everything i can do and still the same result. switched back to Rev.A and i can get 3g "ok", not sure whats up. Any suggestions? I also reflashed the Mr2 radio and no change.
Another thought is my SIM card might have taken a dump. Id be willing to take it into verizon and get a new sim but dont want to unroot, revert to stock. got way to much going on with my phone to just start from scratch again : ( just so i can "try" if a new SIM would work. what would happen if i took my rooted thunderbolt into a verizon store for a new SIM card?. Would they Deny me service?or put a note on my account stating i have rooted and voided my warranty?. Just curious as to what would happen. they would deffidently notice right off the bat because of my sense 3.0 rom, kernal, gingerbread, signal icons,lock ring,signal bars, spash screen, boot animation and sound, etc...
need help guys! thanks in advance! : )
Well I know you said you don't want to but just make a nandroid backup before you unroot and stick it on your pc for safe keeping. Then when you are re-rooted just wipe everything and restore the backup and you are EXACTLY where you were before. Plus with Revolutionary re-rooting takes all of 5-10 minutes.
Sent from my HTC Thunderbolt
Talk to the guys there. Get a feel for them... The guys at the shops near me couldn't care less about a rooted device. As long as the software isn't the issue, which a bum SIM shouldn't be, they shouldn't really care. I'd feel them out a bit before assuming unrooting is a must. You might get lucky.
I will send this thread up. This is exactly the problem I am experiencing. The Thunderbolt has perfectly good network signal but data connection is not working. It complains about "SIM card not found" when entering the Settings and APNs. The SIM card is detected by the device otherwise, it's possible to save contacts to it and retrieve them. But 4G data is completely dead.
I visited a VZW store yesterday and received a new SIM card but the problem is still there. I have also tried to reflash to the latest leaked radio without any solution.
The ROM used is the latest Synergy Nightly.
I begin to consider the possibility of restoring the Thunderbolt back to stock and get a replacement but it would be good if this problem can be solved.
THUNDEROID said:
Hello all,
I have had no data connection in the last few days. solid signal, but no data. i have done almost everything i can do and still the same result. switched back to Rev.A and i can get 3g "ok", not sure whats up. Any suggestions? I also reflashed the Mr2 radio and no change.
Another thought is my SIM card might have taken a dump. Id be willing to take it into verizon and get a new sim but dont want to unroot, revert to stock. got way to much going on with my phone to just start from scratch again : ( just so i can "try" if a new SIM would work. what would happen if i took my rooted thunderbolt into a verizon store for a new SIM card?. Would they Deny me service?or put a note on my account stating i have rooted and voided my warranty?. Just curious as to what would happen. they would deffidently notice right off the bat because of my sense 3.0 rom, kernal, gingerbread, signal icons,lock ring,signal bars, spash screen, boot animation and sound, etc...
need help guys! thanks in advance! : )
Click to expand...
Click to collapse
Theres a issue with some roms not being desprinted enough and flashing them can corupt the vzw setup. Either flash back to orig and reroot or do the ##whatever and make sure your data config is right. If i helped and im sure i did click thanks
Sent from my ADR6400L using xda premium
My friend thought he bricked his phone and wanted to throw it away but i talked him into giving it to me. So when i got itthere was nothing on his phone internal and nothing on his sd card. So am guessing it was bricked but i was able to get into hboot mode so i thought its not brickied so i downloaded a lot of rom and all that good stuff and i came across onnthat worked its even on ics but the thing is i cant get signal so am gonna mess with it some more and see if i cant get a signal i will up date later tonight seeing that am exicited and cant sleep i might have a new rezound for sale later on ebay :0
still no signal
does anyone know how to get signal back after ics update
There's no official ICS update, so if the phone is on ICS then it's running one of the ROMs a dev made. Look in
Settings > About Phone Software Information > More
and see if you can tell which one and then check that thread and see if there's been any signal issues. Mine has the ROM name under "Build Number".
still the same
does yours have a signal and texting or i mean a fully fuctional phone
Do you have an activated SIM chip in it? If not then there's your answer.
signal
Ive read about getting a new radio for signal now Ive used google xda and other forums but have now idea on how to get a new radio would you now how to get one for the htc rezound. I found a page but didnt want to download because it said could give you black screen and I dont want that agian. If you can give me the radio number from your phone so I can download the right one PLZ.
OH YEAH
when I go to the HBOOT screen and it scans file in grenn letters one always comes out PH98DIAG.NBH no image or wrong image what does that mean do you know. sorry for all the ?s but I am new and this is fun learning all this stuff.
sim
YES the sim is in there and it is active using mine from my phone Ive tried everything from removing the sim and putting it back in and rebooting and the back cover is on
Your best bet would be to flash a GB kernel, or if you're on a GB kernel you should flash this http://forum.xda-developers.com/showthread.php?t=1467329 . It includes the firmware update that will update radio, hboot etc.
bbarlow26 said:
YES the sim is in there and it is active using mine from my phone Ive tried everything from removing the sim and putting it back in and rebooting and the back cover is on
Click to expand...
Click to collapse
If you are using 4g sim from another phone it won't work. The Verizon sim cant be swapped out like gsm sims IIRC
Sent from my ADR6425LVW using XDA Premium App
jmztaylor said:
If you are using 4g sim from another phone it won't work. The Verizon sim cant be swapped out like gsm sims IIRC
Sent from my ADR6425LVW using XDA Premium App
Click to expand...
Click to collapse
^Forgot to mention this derp. But he is correct, you would need a new sim that they would program for the rezound.
All of sudden, my phone does not detect the SIM card anymore. I inserted another good SIM card, and get the same error. I tried to press the SIM card to ensure good contact, but not working. No problem with other function. I inspected the SIM card slot and it appears perfect. The phone has never been dropped or having liquid damage.
I did the factory reset, but could not get rid of the error. Unfortunately I just travelled to oversea...
AT&T agreed to replace the phone, but I will not have any phone on the road.
I am willing to try anything. Does not seem to be software related, but...
Anyone know how to fix the problem?
Thanks.
Hey. There us a thread about this just search for it... don't think they found a solution
Did this happen while your sim was still in the phone or after a removal and replace?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
My 1717D stpped working too when I installed T-Mobile radio
I bought 1717D with Android 4.o.4 on it , Kernel 3.0.8-perf-1717DTLLF4-CL793911 and tryed to install T-Mobile modem to work with Mobilicity.Ufter this update phone doesnt recognize my SIM card any more.I Tryed all 3 modems with the same results, even though I did changed modem on two previous 1717 phones before.They were with 3.3.5. I thing The problem is in Gingrbred rom this pfone has.Where can I get original Yelus factory Rom ?One more thing is strange: it doesn't show any IMEI ,Baseband shows Unknown.
The phone has ics 4.0.4. I inserted a foreign sim card while traveling abroad and found "no sim" error. Then i switched back to the att sim and found with the same error. I shall say i always use the foreign sim while oversea and never had problem with this phone before. And i always power down, remove battery and then replace sim card.
I reflashed the ics radio and still no good. I can see the imei number in setting. But the baseband is unknown. I read almost all related posts and could not find a software fix.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
hmei888 said:
The phone has ics 4.0.4. I inserted a foreign sim card while traveling abroad and found "no sim" error. Then i switched back to the att sim and found with the same error. I shall say i always use the foreign sim while oversea and never had problem with this phone before. And i always power down, remove battery and then replace sim card.
I reflashed the ics radio and still no good. I can see the imei number in setting. But the baseband is unknown. I read almost all related posts and could not find a software fix.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Help!
I have the exact same issue. Unrooted, ICS 4.0.4.
timidtommy said:
Help!
I have the exact same issue. Unrooted, ICS 4.0.4.
Click to expand...
Click to collapse
I had the same issue.
http://forum.xda-developers.com/showthread.php?t=2260171
SENT FROM MY I717
Made in China:{
"No SIM" just happened to me. I recently updated to the official JB stock ROM & Note worked great for about ten days... then just quit and displayed the "No SIM" error message. I first tried just shutting down, removing & cleaning SIM, replacing & rebooting. Nada. Then tried different, fully charged battery. Still no go. Still at home tried a factory reset, removing SIM, clean, & reboot. Gave up and went to an AT&T kiosk. Rep set me up with a new SIM and I'm back in business for two days now. Rep was quite philosophical, "it happens sometime." Still don't know why.