[Q] Help with ROM - 7 Mozart General

Hi all,
I've browsed through all topics I've found on ROMs for Mozart and I'm confused with mine. I've bought mine unlocked from Hong Kong. Here's what I get from device:
firmware revision number: 2250.09.12803.707
radio software version: 5.52.09.16_22.33a.50.10U
Bootloader version: 1.28.2250.3(113810)
It looks like I have quite fresh version (1.28) though it has awful gradient rendering and I'm stuck with only English (US) keyboard...
Is there ROM I can flash (or safely try flashing) on my phone to get European set of keyboards and better gradients?
Thanks in advance!

uprom = goldcard

Interestingly enough while using PSAS I've got CID that started with 01 and the rest was just zeros. That was WinMo 6.1 Samsung that I used to get the CID. And in fact it reported CIDs for what I believe are internal partitions while flash card and its own internal storage showed this 01000... thing. So I went with what I had and passed it to PSAS goldcard generator and it gave no errors. Now I wonder if I should try to flash with this card. Will it just give an error in the beginning before flashing anything if it's unacceptable or will I potentially get in trouble?

ok, so I'm impatient guy and I just tried - when started, it showed update screen for some time. then it rebooted and showed the update screen again. then after a while it has written OK against everything (MOZAIMG.nbh, RADIO, BOOTLOADER, OS, RCUST) and reposrted that Update Complete | UPDATE SUCCESS. Will try to detach it now

Yay! I long-pressed power button to shut device down and started it normally and now I have my euro-mozart. thanks everyone for posting great info on goldcard flashing for wp7!

Related

HTC HERMES (M3100) - fatal crash, PLEASE HELP!

Hi,
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
Please help.
Thanks
If your device is still working ok as a PDA then hopefully it just screwed up the radio update of your device.
Try reflashing the Radio only
Look Here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Post back with results
Regards
S.K
EDIT: Sorry only works on 1.04 bootloader only. Afraid your gonna have to wait for Pof to come up with a 1.06-1.04 workaround
Hi S.K,
Thanks for the info. I have now tried installing the HERM_1.20.31.10_type2_radio_fixed upgrade but unfortunately the radio upgarde crashes also. It all seams to go well, (after using MaUpgradeUt_noID.exe twice) the phone says "Upgrade Radio Stack Please wait" and the progress bar appears on the PC but then after 10 mins I get an ERROR 114: RADIO ROM UPDATE ERROR.
Do you think this might be becuase the last upgarde partly installed bootloader 1.06?
Any other suggestions - I'm desperate to get the hpone on M3100 working again.
Thanks
Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please post USB monitor capture, otherwise can't help u.
Hi Pof,
Thanks for the offer, I will sort out the usb software on Monday. Are there specific actions that I should try, obvioosly I will usb monior everthing I do but I want to keep it to the point and not waist yr time trailing through huge log files.
Cheers
BTW - I have tried all options of recovery, such as attempting to install the latest radio and trying to install the new rom from an sd card, trying several roms and using imei unlocker - all without any joy.
I think the problem is that I have partially installed radio and bootloader 1.06 so I can't fix the problem.
Thanks again.
@wotthefok:
For me is faster to look at the usb log file, then I exactly know why the upgrade fails, otherwise I have to decode it from your feedback and I can't be really sure. Check the "upgrading problems" page on the wiki, if none of the steps there seems to fix your problem, post USB monitor log please.
Log Files as requested
Hi,
I have captured information using usb monitor and attached the zipped log files for your attention.
The first is called USB_monitor_log_Herm_120Radio_twice. This log details attempting to install the HERM_1.20.31.10_type2_radio_fixed upgrade, and running it twice - just in case.
The USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_twice.zip details attempting to install the RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship upgrade, simply using the standard ROMUpgradeUt.exe method. This generates the expected Vendor ID error.
My primary focus is to install the radio upgare or download my bootloader to 1.04. The PDA part of my m3100 does now freeze occasionally but at least functions whereas the phone is completely dead.
Thanks in advance.
Please attach capture in *ANSI TEXT FORMAT*, the .lgs file you zipped is totally unuseful
Edit -> Export and Save as type "ANSI Text files".
Also make sure you export in "COMPLETE" view, see the wiki for more details.
OK, Spot the novice.... I have now created a txt log file that captures activity of me running the 120 Radio upgarde - but only once this time. I still had to zip the file due to it's size. Hope this is OK.
I'll send the other logs within the next couple of hours. Please let me know if the output I have sent so far is acceptable?
Thanks
wotthefok said:
Please let me know if the output I have sent so far is acceptable?
Click to expand...
Click to collapse
No, it's a "basic" capture, you have to export a "complete" capture:
Start USBMonitor.
File -> New session -> USB Monitor -> Select USB device where your phone is connected -> Check "request view" -> Finish
In the upper part there are two tabs: basic and complete. Click on "Complete".
Right, Try again (duh!) OK, I've tried to keep the log files names as self-explanitory as possible... USB_monitor_log_Herm_120Radio_run1.zip is the r20 radio upgrade, 1st run and USB_monitor_log_Herm_120Radio_run2.zip the second run - without disconneting or resetting the device.
USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_ran_twice.zip is the Cingular upgrade run via the ROMUpgradeUt.exe, again run twice without disconneting the device.
Hope I got it right this time.....Please let me know if there is anything else I can do.
Thanks.
This time you got the captures right
- You're on bootloader 1.06: You don't have 'rtask' command, you won't be able to do any radio upgrade only.
- Your device is not CID unlocked (Security level=FF, unprivileged)
- The bad flash caused the CID area to corrupt (CID: Wait interpreter timeout)
- When flashing a full ROM you get a CID not allow (255) this is because your corrupted CID doesn't match the CID on the ROM.
The radio part is screwed, you could have fixed this if you where in bootloader 1.04 by flashing a full ROM, but as you are in 1.06 you can't because of CID checking. But you're lucky because the OS ROM is intact and you can boot the OS, you should be able to downgrade to bootloader 1.04 from OS and flash a full ROM after, which will hopefully fix your radio.
Just wait until a solution to downgrade bootloader is available (I'm working on it).
Hi,
As I suspected.... Suppose it's not all bad news though - just means that I have to be patient and use my communicator once more. Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
I have already got a IMEI-CHECK sim unlock from where I originally got the M3100 unlocked from Orange to work on o2. That said, I have run either unlocker 2 or 3 with the .unl that I know worked I now get
HTC HERMES v3c unlock
Starting communication.........
Checking device..............ERROR
The device you try to unlock is not supported.
Please contact your supplier site.
Device is rebooting
Press any key to quit this application.
I'm currently chatting to the guys at IMEI-CHECK re this problem.
Anything else I can do to assist you in anyway??
Cheers
wotthefok said:
Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
Click to expand...
Click to collapse
They have it (M3100v3cUnlock.exe), but it will not work on your device because your IMEI is corrupted and their unlocker will not be able to read it and to check/compare with the .unl key file.
Hi,
Just a quick update. The guys at MIGsofT LTD have VERY VERY generously said they'll have a look at the problem for me so my phone will be winging it's way to them today.
Thanks for your assistance and helping me be certain of the problem and to better understand the root cause.
Hope this information will prove useful to others.
Another quick update...
The guys at IMEI-CHECK (MIGsofT LTD) have rectified problems with my handset and managing to reinstall bootloader 1.04 in the process!!
They also turned my phone around in under three days and only charged me the cost of postage! I had previously been a customer of theirs but it was still a very generous and helpful offer and I would certainly pay for the service than have a duff handset - after all £250 + for a paperweight is rather excessive....
If you're experiencing a problem like mine why not get in touch with them and offer them money to have a look at your handset? No Guarantees but it seemed like my last chance, for a while anyway.
Praise to IMEI-CHECK for a brilliant service - they are King of the day !!

After bad flash, can't flash new radio (RSA FAIL)

Hello everyone,
i've been reading this forum for one month,
It was the day I decided to upgrade my HTC HD2, and someone disconnected the usb cable during the process.
Don't talk to me about that ;-)
The problem is I can't flash any rom radio into the phone.
OS ROMS work.
I read carefully a lot of posts here, I can say I have exactly the same problems as _Juster_ from this post :
forum.xda-developers.com/showthread.php?t=618084
My phone is a french HTC HD2, Orange branded.
I successfully installed HSPL 2.08
Making upgrades using USB is very difficult, it is very unstable (communication errors, no response from the phone....) .
I tried on windows 7 pro and win xp sp3 and it is the same.
I then created a goldcard, that I'm using to flash directly in the phone. It is stable, but when flashing a radio rom I always get the "ERROR 00018003, RSA FAIL error".
I learned from xda that the issue can be solved by flashing the original stock radio rom from Orange.
I downloaded a lot of shipped roms from Orange, or HTC.
Always RSA_FAIL.
I'm maybe doing something wrong, or this is a hardware problem....
a few questions for you folks :
1/ It seems that the original Orange stock rom is a 1.43
Must I have the 1.42 HSPL to flash it ?
Is the version of your HSPL important, when you want to flash a rom ? can I flash whatever rom with any HSPL ?
2/ using a Glodcard with HSPL already installed.
when you enter on the bootloader (vol down + power) you arrive on the HSPL tri color screen, displaying HSPL 2.08....
Are you sure the Goldcard is being used ?
How to be sure of that ?
I think (I may be wrong) when you enter the bootloader mode You are on HSPL mode.
What I do to enter the goldcard mode :
I just press power,
I have a "Software update failed message"
Then I arrive to the "Loading..." message
With the name of the ROM i'm trying to flash
LEOIMG.nbh
RADIO V2
Press power to start update
Am I right ?
Thanks for reading this and helping me.
is there other Tasks like task 29 you are aware of ?
Task 29 formats the phone ?
is there a way to partition the phone or to diagnose if there's a problem ?
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Robinmasters said:
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Click to expand...
Click to collapse
take a look at this thread, it might help
http://forum.xda-developers.com/showthread.php?t=621930
Thanks for the answers.
R3dox said:
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Click to expand...
Click to collapse
I already flashed 22 radio roms and a dozen of full roms (os + radio) using SD CARD.
As the usb is very unstable I'm using the sd card method to flash, which is also a goldcard.
the problem is I ALWAYS get the RSA FAIL message (error 00018003) at the end of the radio flashing process.
This guy : forum.xda-developers.com/showthread.php?t=618084
had the same problem but with un unbranded phone and had it solved by flashing a cooked rom he randomly choosed.
To understand the situation,
my phone is an Orange branded one, what is the difference between a branded and an unbranded phone, assuming they both have the same HSPL ?
thx
Just sold my HD2.
Seems like some questions don't have answers....
what was the problem? íf i understand you right, it even worked..but you couldnt flash another radio...
why dont you use it further?
DN41
The phone wasn't able to boot
It was stuck at the white HTC logo,
After the failure of a radio flash, I was not able to flash it again. (RSA FAIL)
I read all the posts about this problem in xda, tried everything, nothing worked.
sorry...
so who bought it? how much did you get?
someone who needed a new lcd or so?
DN41
150€ , it was in a very good condition
RSA FAIL
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
i've same problem, anybody know how to solve this problem?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
You don't just rename the whole update,you extract the ruu_signed.nbh file and rename that.
RSA FAIL
I had the same problem with my polaris (htc touch cruise - pola160). I managed to get rid of the problem by downgrading the radio rom.
I couldn't find my old one, but I was able to find the highest version older than my old one in the forum. So I first downgraded the radio using the sd card, after that the rom I was trying to install in the first place worked.
Thx to pcarvalho for this "fix" : http://forum.xda-developers.com/showpost.php?p=3645124&postcount=1 - the "Important Note:" section (always read the small print ).
Hope this helpes.
PS: Sorry if this is too late for some...
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
Fz.hary said:
i've same problem, anybody know how to solve this problem?
Click to expand...
Click to collapse
jasonlee90210 said:
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
Click to expand...
Click to collapse
Put the back of the phone in front of an AC in cold for 5 minutes, and keeping it always in front of the AC try to install.
If you are able to do that, send it back to the warranty.
Hello,
I have the same problem!
long time ago I had HTC devices, but few days ago I bought HD2 and it was installed android. Is unable to start or when they try to load a ROM eror occurs.
phone has only a white scrin.
error occurs mostly when upgrade Radio ver. I somehow managed NRGZ image but again not boot system.
Task 29 also comes to 19% and stops with the error.
I have a feeling that the real problem is the radio version. (00,018,003 Radio Fail)
I do not know what is the original ROM.
IMEI: 3526 6604 8712 295
SPL 2.08.HSPL
any help came good

HTC Mozart can´t flash a rom with and without Goldcard after Installing a wrong rom

Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
so you have this problem for two weeks now?
what rom did you flash?
check the mozart forums:
http://forum.xda-developers.com/forumdisplay.php?f=779
and maybe this will help you:
http://forum.xda-developers.com/showpost.php?p=12120618&postcount=6
Yes, i have this problen for 2 weeks now.
It was a unbranded T-Mobile 1.28 rom.
Thanks, i have found someone else, with the same Problem, but no Answers.
see here
I have my Goldcards created with Ubuntu and Windows... Ubunto to find the CID and Windows, to create it...
And it seems to work, because the mobile is loading and checking the rom of the goldcard, but 3 seconds after checking... is the serial messeage in the bottom of the display and checking.. on the top, but nothing happens...
I had the same problem with my HTC 7 Trophy, flashing a new ROM did not work, and it changed the Model ID of the Phone. Once that has happened there is no way to flash a different ROM.
I tried various tools to try and get the Model ID changed back, if you use MTTY you can read the Model ID, but I don't think you can change it with that tool.
In the end I had to send mine to back to HTC to get the mainboard replaced.
hm sounds very bad..
but i think i saw the awnser somewhere...
try checking other wp7 devices forums,
hd2 people are very active..
hd7 people too...
somewhere ive read about some "force rom download mode" by pressing camera button on boot too, dont know if there was truth in it...
you say you had the t mobile 1.28 installed or you did try to install it?
it is not "unbranded" if its from tmobile (or do i get the term unbranded wrong?)
i belive there are 3 different t-mobile roms: TMO-DE, TMO-CZ, TMO-AT
these are all branded roms,
if you want unbranded you get: HTC-EU or HTC-Generic
ive used this method to unbrand my mozart from tmode 1.25 to tmode 109 to HTCEU 1.28
if you come from TMODE (as a german you should) you may want to try the 109 rom (works without goldcard)
so that i understand right, you can use the OS but you cannot make calls because of the cooked radio?
Hi, I have a German rom 1.28 installed, because i only can choose German or English language, but I do not remember which version it was. I think I previously had to install a 1.09.
However, there is something not been in order.
I think that the "force download mode" for this time is just for Zune, but I try to search for more information.
If I could flash any firmware I would do, but there is the problem with my "Model ID".
I think, the goldcard method is the right way, but it don´t works.
To eliminate errors about my hardware ( selfmade y-cable and hama 19in1 usb-cardreader ) I have ordered a delock y cable and a single usb-sd reader to try it on weekend again, but I think, the hardware is not my problem.
But i can test it not before weekend, because I´m a truck driver and only on the weekend at home.
Phone calls can I do with this firmware.
My display is out, if I choose a phone number. This time I only can hang up with the headset or by take out the battery
It works again until the other person accepts the call or the mobile hangs up automatically after 8 or 10 rings.
The volume of the headset ( earphones and micro), with this firmware is to quiet, too.
There are many problems….
somebody else with 1.28 and problems?
you dont need goldcard to flash back to stock rom
you should be able to flash any stock tmode rom without goldcard.
try to flash 109 without goldcard.
I´ve tried to install the
“RUU_Mozart_TMO_DE_1.09.001.16_5.50.09.15_22.23.50U_Signed_by_ansar”,
but after 1% my mobile reboots and the RUU Installer says:
244 wrong “MODEL ID”
are you sure it is a german Mozart?
this rom you flashed is made for unbranding.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=817691
just saying....
that suxx have you tried this?
Zetabit said:
Problem Solved!
Here are the steps I took to resolve the issue I was having, with the Mozart stuck at bootloader, "Enter USB Host...".
First I formatted the SD-card, then used my brothers Android phone with ASTRO File Manager to extract the CID code from the SD card.
1. Insert the SD card into the Android phone
2. Start the ASTRO File Manager
3. Navigate to sys/class/mmc_host/mmc1/mmc1:aaaa (instead of aaaa there could be something else as well)
4. Long press on the 'cid'-file
5. First select Open as, then Text
6. Then select File-Editor
7. Write down the number 1 to 1 onto your PC/Mac​
Once I had the CID code, I used http://psas.revskills.de/?q=goldcard to generate & email me the goldcard image file.
I formatted the SD card at this point, FAT32, 4096 sector size.
I then used HxD Hex Editor and Disk Editor to copy the goldcard.img into the first sector the SD card.
Heres how:
1. Run HxD as Adminstrator
2. Open the SD card by going to Extras > Open Disk > Physical Disks (important) > Removable Drive. Make sure Open as Read only is unchecked.
3. Open the goldcard.img by going to Extras > Open Disk Image.
4. From the goldcard.img, Select All and Copy all bytes.
5. Paste into the first 384 bytes of the SD card - offset(h) 0x0 - 0x170.​
Next I copied a European ROM on the the SD card (in explorer as you would with any file) and rename it to MOZAIMG.nbh
With the Y-cable I booted the phone and to my disbelief it started and successfully reflashed the phone.
http://www.youtube.com/watch?v=0t_xNdf9DeQ&feature=player_embedded
Hope this helps!
Click to expand...
Click to collapse
there has to be a way to fix it.. or maybe not
the other guy said he got his mainboard changed, maybe you broke it.. damn...
@pik.
I have tested to flash the "RUU_Mozart_TMO_DE_1.25.111.05_5.50.09.18_22.24.50_RELEASE", but after 1% the same problem "Invalid Model ID"
@webwalk®
I have created the gold card according to these instructions.
I have no Android phone, so I have the part to find out the cid solved with an Ubuntu Live CD and my built-in Cardreader.
The goldcard seems to work, since it goes from loading in checking..., then it is always the same on serial
Edit: Yes, I´m sure, that it is a German HTC Mozart.
i've the same problem with 1.28
can someone help us?
i have the same question
my hardware version is also NA
dsmps said:
Hello,
I have a big problem with my german HTC Mozart ( T-Mobile version ).
2 weeks ago I flashed a RUU Rom to unbrand my mobile.
With this Software version my mobile is still branded and don´t work correct.
I would write more about the problems whith my mobile and this firmware, but my English is to bad….
After that I can´t flash any other Rom.
I tested to Install many other Roms, but the RUU installer every time says “Wrong Model ID”.
Then I looked my Phone Informations and see:
OS Version: 7.0.7004.0
Firmware revision number:2250.09.12803.111
Hardware revision number: NA
radio software version: 5.52.09.16_22.33a50.10U
radio hardware version: 0.0.0.0
Bootloader Version: 1.28.2250.3(113810)
Chip-SOC: 2.2.5.0
With the Rom, I flashed should be something wrong…
The Information on my Boot Mode Screen ( Rainbow) should be wrong, too
MOZA100 SS-BC (4K)
SPL-1.28.2250.3(113810)
MicroP (LED) 0x07
Touch C1(v69)
SD SANDISK 15193MB Class0
Partition Info-v211v413
In a german forum I found the same problem , but there are no solution.
Also I tested, to flash with a Goldcard.
I read all instructions to create a Goldcard an how to use it in this forum.
I think my created Goldcards are all OK but the USB HOST Screen every time says:
1. Loading
2. Checking…
3. And 3 second Later Serial on the bottom of the Display, but nothing else is happens..
Any Ideas?
Click to expand...
Click to collapse
i also have this problem,somebody say that use the "JTAG"can fix it.
does anybodu solve this problem on mozart?
regards
please help if you can i cant flash any rom and i want to go to dft
please help i cant flash anything please any solution
my problem is very similar to yours. i have tmob de mozart too and this vender id error after flashing an official europe rom....
i ordered goldcard tools from amazon but they arent here maybe in three days. but i think it would be the same problem as yours.
->
i had at first the dynamics7 1.00 mango rom installed on my htc mozart.
after that i made rspl to 1.28.
after that i tried to install RUU_Mozart_S_HTC_Europe_5.12.401.02_5.71.09.02a_22 .51.50_RELEASE. the flashing started. than the phone restartet and installed spl 5.12 but the flashing doesent went to finish because of vendor id error.
now i cannot flash any stock tmob de or htc europe rom because of vendor id error. (clear because of spl 5.12) but the slspl rom doesent work, too. every flashing stops at 1%....
PD 67100 SS-BC (4K)
SPL-5.12.2250.2 ( 135167) MNG
os 7.10.8107.79
firmware 2250.21.51301.401
hardware 0004
radio 5.71.09.02a_22.51.50.21U
radiohardware A.102.0.D4
bootloader 5.12.2250.2 (135167)
any solution for me? is it maybe possible to send lower spl via cabsender?
Don't use wrong ver
aggelosss5 said:
please help if you can i cant flash any rom and i want to go to dft
Click to expand...
Click to collapse
Be carefull with DFT i halfbricked my bootloader, now I cant flash any rom, can't use the phone.
I am looking for new method maybe JTAG is the only way out of this.
Thank if helpful:good:

Stock rom not working

Dear XDA Developers community,
my father recently gave me his old HTC HD2. It had its factory default stuff. I wanted to download some apps and play around with it, so I downloaded some apps from the marketplace. As soon as I downloaded a free Sudoku game, and ran it, the phone stopped responding. I tried to do a soft reset, but the phone did not respond either (it was stuck at the menu).
Now, I may have done an error: I removed the battery, instead of performing a Hard Reset. When I turned it on, it started rebooting in a loop, being stuck always at the HTC white welcome screen.
I decided for a Hard Reset. Well, it always gets stuck at the bootloader screen (the screen with the 4 colors).
So, I researched a bit, and found out, you can return to its stock ROM, eve with a stuck bootloader.
Well, I downloaded many old ROMS (the Rom before the problems was a 1.66 one), and ran the RUU through USB. But it always gave me a Incorrect vendor ID error (I think it was 194), so the update would always stop at 1%.
I even tried a 1.43 ROM.
I tried many WWE version Roms, but they don't seem to work. My father bought the phone on Amazon US, with no special contract or phone lock, so I guess it has to be a WWE, so I don't know why the RUU says it's incorrect.
I have seen other threads that have some similarities, but my exact same problem has not been addressed.
I would be very happy if you could help me, since I do not want to spend any money on repairs which I could probably perform with help of the community
I would be most glad to give more information if needed.
Many thanks in advance.
Edit:
The issue was resolved by installing HSPL4 on it, and then using a WWE 1.66 ROM on it! Silly me for not trying that earlier!
glad you sorted it, , to explain why it wouldnt work, you were not using the correct rom for that phone.
Your first clue would be the 'invalid vendor id'. An 02 phone (for example) will only take o2 roms, a tmo phone tmo roms, a voda phone, voda roms. Only unbranded phones take pure wwe roms, so for example
ruu leo htc wwe 1.66.405.2
see it says HTC in the filename? its for unbranded (not sold by a network) hd2s only.
I guess you have a branded one. (even if its been unlocked, the rom lock always remains, which is why we have hspl)
Incidentally, you only had trouble because you initially flashed from sd card, and step 1 in teh sd card flash is hspl gets removed, the phone restarts to continue flashing but because hspl is now gone, it fails. Had you flashed from usb teh first time, it would have worked.
samsamuel said:
glad you sorted it, , to explain why it wouldnt work, you were not using the correct rom for that phone.
Your first clue would be the 'invalid vendor id'. An 02 phone (for example) will only take o2 roms, a tmo phone tmo roms, a voda phone, voda roms. Only unbranded phones take pure wwe roms, so for example
ruu leo htc wwe 1.66.405.2
see it says HTC in the filename? its for unbranded (not sold by a network) hd2s only.
I guess you have a branded one. (even if its been unlocked, the rom lock always remains, which is why we have hspl)
Incidentally, you only had trouble because you initially flashed from sd card, and step 1 in teh sd card flash is hspl gets removed, the phone restarts to continue flashing but because hspl is now gone, it fails. Had you flashed from usb teh first time, it would have worked.
Click to expand...
Click to collapse
Thanks for the answer Samuel. I got the phone to work again, and I even loaded NAND Android from the DFTeam.
Although the ROM runs just perfect and I love it, now my Volume Up key has stopped working.
I could not post on the Development section, so I guess I won't bother anyone, and will just post it in this thread.
It is a minor issue, but it's still is annoying. I found on the forums problems with the key with other models, but not with the HTC Leo.
Maybe someone has heard of this. Again, thanks in advance!

[Q] 7.10.8112.7 failure. Continually Rebooting. Phone not working

I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
An Update
I have now dne a successful factory reset. Achieved this by leaving the battery out over night. I have been here before and am pretty sure that I will struggle to apply the above update.
Any suggestions would be appreciated.
desmo992 said:
I had a reliable debranded Mozart which has been unlocked by Orange in the UK and was running the ansar rom. It has accepted many updates in the post (post debranding) via Zune.
Unfortunately the 7.10.8112.7 update was problematic with error codes C1010007 and then C101002E.
I am left with a useless phone. I have done a factory reset to no avail.
The phone will boot into wp7.5 and sometimes holds for a few minutes before rebooting. Other times it gets into a loop while booting and ends up vibrating 7 times.
Any ideas anyone?
Is a fresh rom likely to help and if so which one?
I am currently showing:
OS 7.10.8107.79
Firmware 2250.21.51201.401
HW Rev 0004
SPL 5.12.2250.1
Thanks in advance
Click to expand...
Click to collapse
Like many other Users of that fu**ed Phone !
Iv got 2 of that Mozarts, one with the reboot and second without.
Its a Hardware Problem. Both Phones have the same ROM , changing Batteries ,changing SDCard, no Matter
it stays; the first reboots , the second never...
Update on Rebooting
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
desmo992 said:
Here is an update of my rebooting issue:
Following a factory reset (battery left out overnight) the phone is not longer rebooting PROVIDED THAT ID DO NOT CONNECT TO A WIRELESS NETWORK OR ATTEMPT TO APPLY AN UPDATE VAI ZUNE.
I am also able to get into the bootloader (spl5.12.2250.1) and establish a USB connection.
I do not want to mess with rolling back the bootloader as that seems to be a very high risk undertaking.
My suspicion is that a fresh rom installation may sort the problem as it only appeared after applying an update.
So can anyone suggest options for updating to a new reliable rom which will not consume excessive battery life - or at least point me in the right direction for one which is compatible with my current spl.
Thanks in advance.
Mike
Click to expand...
Click to collapse
Dear,
It seems that during update you phone might have low battery or update is interrupted.
You can install offical rom containing 201 search in file factory.
Otherwise go with the below, but you will need to downgrade your spl which is a lengthy process.
http://forum.xda-developers.com/showthread.php?t=1837393
Update to my last update
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Karlitos
HI am new to this site and pls i want an advice on what to do on my htc hd7 WM 7.5 (upgraded yesterday)
well since i add the phone had problem with an error msg dat says (couldnt connect with my phone) when ever i sign in into my window live account.
secondly i was able to use same account id to sign in on my computer to download games and application but dnt know how to transfer dem to my phone...............
lastly i wish to switch to install android on my HTC hd7 as i did to my htc hd2..............but seems der is no hack to that.
below is the spec of my phone
name: karlitos
model: HTC HD T9292
software: win 7.5
total storage 14.64gb
available: 13.56gb
os version: 7.10.7740.16
firmware version no.: 2250.21.51004.401
hardware version no.: 0002
radio software version: 5.71.09.02a_22.51.50.21U
radio hardware version: A.102.0.D4
bootloader version: 5.10.2250.0(132968)
chip Soc version: 2.2.5.0
thanks ...................
desmo992 said:
Thanks for your reply adeebulrehman
1. In your opinion, what are the merits of each of the two roms you suggest?
2. Can you suggest where I download the official rom safely?
3. Can you point me in the right direction for some safe and reliable spl downgrade instructions?
Many thanks
Mike
Click to expand...
Click to collapse
Dear,
Just Search Mozart Shipped Rom That matches your firmware revision number last 3 number of third section.
2250.21.40600.061
For downgrading SPL there are details post of our Forum Moderators kindly read. All these are safe method unless you make a mistake

Categories

Resources