Hi guys, I'm now in a serious problem...I'm using a stock ROM but tried to flash to WM7 and here the nightmare began.
now the problem is that...I can't boot the phone, only show "HTC", can't even see the "quietly brilliant"..I tried to flash back to the stock rom but I noticed that there are no USB connection with the PC, I tried hard rest using the volume key but same things happened.
so anybody able to help me? thanks a lot!
Try to flash the stock ROM with the SD card method (you can find a description in the stickies of the ROM forum).
The error you describe sometimes comes when you have a wrong Radio ROM on your device.
What exactly did you do to get WP7 on your phone? Did you flash HSPL 2.08? Did you flash Radio Rom 2.15?
Did you also try
VOL DOWN + Red button??
you should she them some colorful bars if so, you could be lucky, plug in you usb cable and it should tell you "USB". Then flash your stock rom (Dont forget to run it as Administrator on your pc)
i hope you will get it back working!
Related
hi,
i've searched, and am stuck. i tried to flash a new ROM today, but it stopped at 76% and said no connection!?? i've flashed before with no problems many ROMs. I have HardSPL 1.15 mfg installed and everything always worked. Now i'm stuck at 4 color boot screen screen. HardSPL is still there, there is a message at top right saying 'RUUNBH'. I plug USB in and it says 'USB'. I run mtty but can't seem to get any CMD, or even type 'boot' in, no response on app, running on XP?
i'm reeally stuck, and had to come to work, so am worried. can anyone help??
sorry, i am still searching for solution, but please any help appreciated!!
thank you
i will try to check back often, but stuck at work might be problem ..
i got stuck at that boot screen too, but it happened during a boot image change operation. All I had to do was install a new rom.
Hope it helps...
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
badaas said:
how did you install a new rom? cos i cant activesync, and running CustomRUU.exe says it cant find pda device
am i bricked? really stuck here :'(
Click to expand...
Click to collapse
Don't worry, you just need to get to the bootloader screen and flash again, you may have a corrupted update that may hault everytime. If it doen't work try another ROM.
Hold down power and the camera button while pressing and holding the reset button.
When you see the Boot Loader screen you can release all three.
Plug in your cable if it is not already, wait to make sure the computer installs the device and then run the ROM Update executable you want or ROMUpdateUtility.exe if everything is placed in a folder.
Note: Activesync and Mobile Device Center will not launch in this mode, and if the utility tells you to connect through activesync or Mobile Device Center ignore and continue.
OK thank you my friends, i will try when i get home from work. fingers crossed!!
cheers
thx guys, all sorted
Hi all,
I'm having trouble. My situation is that my Hero is stuck on the "HERO" screen after I tried to flash the Eugene373's Hero 2.1 Eclair v2.6 ROM. Here's my procedure to flash the phone :
- I performed a Nandroid backup
- then I Flash radio to the 63.18.55.06FU_6.35.07.25 version
- finally I Flash the ROM
Unfortunately, I forgot the wipe's step before flashing the ROM... when I reboot the system, the "HERO" screen stay as long as I keep the phone on. I've connected my phone to my computer and tried many ways to boot in recovery but my computer doesn't recognize my phone (ADB Error: device not found).
After many searches on Internet and some short nights, I tried to power on the phone by pressing "Home" + "End Call" keys and after few seconds keeped them pressed. By doing this, the "White triangle of death" displayed. I pressed one more time "Home" + "End Call". Then I discovered that I can access to the "Android system recovery utility". Three options are available :
- Reboot
- Update from a update.zip on sdcard
- Wipe data
I tried the third one. Nothing new after a reboot... I have done a Nandroid Backup before flashing it. But I can't even boot into a RA's recovery and no Nandroid restore option... Every signed ROM I tried to use to update with this utility lead me to the same message saying that the archive is not signed and the verification process failed.
So finally, the only tool I have access is this recovery utility and nothing with the computer. No logcat, no informations.
If anybody had the same experience or have any clues to find a solution, i really appreciate the help ! ... before giving up on my phone or trying to contact the HTC support...
Thanks guys !
---
Here is some informations about the hardware :
GSM Hero unlocked bought one month ago
Before flash :
ROM : MoDaCo 3.0
Radio : 63.18.55.06JU_6.35.08.29
Recovery on phone : original (untouched)
SPL : ?? (Never touch, so original one)
After flash :
ROM : Eugene373's Hero 2.1 Eclair v2.6
Radio : 63.18.55.06FU_6.35.07.25 (not sure of the version, it was the one suggested for Eclair v2.6)
Did you flash correct Roms??
weird. why dont u guys even read before flashing? EUgene hast done any rom which is compatible for HTC HERO (EURO). Eugene's rom is for HTC DREAM G1. if you did flash htc hero euro with eugene's 2.1 eclair then u must have done a BLUNDER.
at 1st do a nandroid restore.
then go to hero section of xda. download eclair rom made for hero by behnaam or LOX_Dev and correct radio. then flash with these files and let us know. and please please read which section you are going in. Eugene's roms are all posted in Dream section.
Thanks to give me some light ! I didn't know that Eugene's work only concerns HTC Dream... In fact, I used to check android's ROM news on AndroidSPIN's website and the page where I downloaded this ROM doesn't clearly indicate that's only for G1 phone (http://db.androidspin.com/android_developer_display.asp?developerid=57).
My mistake... But now I can't do really much with my phone. I can't find a way to make a Nandroid restore 'cause I haven't access to a recovery by adb. Is there another way to make a restore ?
{Rom}[32b]Eclair Hero 2.1 By Drizzy w/ Help from Barak & Eugene373
see the "[32b]"? that's the g1 version.
Tunedyoko said:
My mistake... But now I can't do really much with my phone. I can't find a way to make a Nandroid restore 'cause I haven't access to a recovery by adb. Is there another way to make a restore ?
Click to expand...
Click to collapse
Have you tried using an HTC RUU to set the phone back to a "stock" image?
Regards,
Dave
had the same problem just now
Was solved when i popped the sd card out (while phone was running), then it showed me the language selection menu.
Thanks for the information. I will never forget this blunder.
I tried to use the RUU_Hero_HTC_WWE_2.73.405.66 but it leads me to an ERROR[170] : USB CONNECTION ERROR
Yeah, as I am stuck on the "Hero" screen, it doesn't boot properly and the computer doesn't recognize the phone by Usb (otherwise I suppose that I could have used the adb shell to reboot on a recovery img)... I begin to think that I am stuck...
Actually the only way for me to interact with the phone is this "Android system recovery utility" screen that can only accept signed packages (I even trid to use a HTC Generic Shipping ROM because they are official signed Roms). Finally do I need to unweld the ROM and change it ?
Finally ! I have found a solution ! I succeed to make a connection through my computer by usb port with the flashboot mode, reboot on custom recovery and restore a nandroid backup. Here's a explanation of my problem with its solution :
Symptoms :
After flashing a phone with an Custom's ROM intended to another phone, you get stuck on the "Hero" screen after reboot.
You can't
make your phone recognized by the computer by usb
use adb to control your phone
But
the screen is on and it can reboot. It stay stuck on "Hero" screen once you power on the phone
when you power on the phone by pressing "Home" + "End Call" keys together and after few seconds keeping them pressed, a "White triangle" screen displayed. By pressing one more time "Home" + "End Call" keys, you arrive to a "Android system recovery utility" with 3 options (Reboot, update, wipe).
Solution :
You can access to a flashboot mode and use the usb port. Switch off your phone and power it by pressing "Back" + "End Call" keys together. You will access to the flashboot usb mode and then use adb to reboot with a proper recovery img to make a nandroid restore (for example RA-hero-v1.5.1 by Amon_RA).
Hope this could help anybody in the futur !
Thanks for all the answers, that gave me informations and motivations to search more on Internet !
Hi,
I have similar problem ... after I flashed the radio for android 2.1 v1.3 and restarted,my HTC is blocked on the HTC and the box image logo and after 3 seconds it shuts down.The only way to power on the phone and get to that image is to reinsert battery.No other buttons work.
Any idea ?
First off id like to say thanks in advance to any replies and also apologize if this has been posted previously (i searched and could not find anything that was helpful) I lurked around these forums when i had my x1 and im hoping you guys can be as helpful for me as you are for everyone else. anyway onto the issue
I used the superboot method to root my ATT US Streak. My intentions were to update to 2.1 following the steps in the "eclair working on my u.s. unlocked streak!" thread (wont let me put a link since its my first post)
after using fastboot to root the phone will boot up and function fine but recovery and fastboot no longer work. i tried flashing Koush's custom recovery and other things that require fastboot and the terminal just says "sending..." nothing happens no errors or anything, the cmd prompt just sits there and i need to remove the battery to reboot the device.
i then downloaded the Rom Manager apk from the market and flashed the clockwork recovery from there (it said i did anyway). when i load the recovery from boot (volume keys + power and its the stock recovery) and chose option 2 to flash modaco custom rom or even the stock dell rom it just goes to a black screen and i once again need to remove the battery to reboot.
the phone itself is still functioning fine when it boots up and everything works the way it should other than the home, menu, and back button lights flash in random orders, thats just annoying though. again any help is appreciated
so what should i try next?
EDIT: woke up this morning and now the device will not turn on. i tried starting to fastboot and recovery but still nothing. plug it into my pc and i get the "found new hardware wizard" for a Qualcomm CDMA Technologies MSM.
first real brick? ha that would be my luck
EDIT 2: a kid just ran through my work, grabbed my phone and threw it on the ground. it screwed up the 30 pin connector on the phone and the charger. im going to hurt somebody. phone is booting again though... put sd card back in and still boots fine
SOLVED: Dont know the technical reasons behind it but i had to reinstall the drivers and switch usb ports for every fastboot and recovery procedure
removed SD card and its booting up normally. any thoughts?
This is what I see when I start up my phone. Can't restore factory default, and I need to figure out how to get back to original or another rom. Can't get past these screens. Have tried the master reset but to no avail. Please Help! Thanks!
Phone : HTC HD2 - Tmobile
RE: Cannot get to boot screen, stuck trying to install aMAGLDR v1.13
I suggest you get your phone back to the stock rom and start over again.
To uninstall Magldr and any Android Rom that you installed to NAND, do the following:
1. Download a Stock Rom from or a Custom Rom for the TMOUSA HD2 Rom, LEO1024 users will have to use a TMOUS compatable Stock or Custom Rom that is LEO1024 compatable).
2. Enter Bootloader Mode by taking the battery out, then put it back in and hold down the 'Volume Down' button while briefly pressing the power button.
3. After the phone enters the Bootloader Screen, plug in the usb cable so it says usb at the bottom of the screen
4. Run the Stock Roms .exe file (or run the customruu.exe file of the Custom Rom you want to flash)
* This will flash a Stock Rom and Radio while keeping your HardSPL untouched *
link- http://forum.xda-developers.com/showthread.php?t=623283
download the stock ROM from the above link
HD2 After install ICS 4.0.4 then reboot device nothing show!
I don't know what's wrong with my HD2
when i install ICS 4.0.4 from MAGLDR113 it was done, but after i'm restart device
It's show word GO GO GO! but waitting more than 10min it's nothing happened.
Pls help how can i fix this problem
anyone can help me? I've tried to root my cherry mobile flare s play, I've flash twrp on it but it always boot in recovery it doesn't boot in system partition so I tried wiping the cache and dalvik cache, still doesn't boot so I tried flashing another recovery/rom and it just get worst it's now stuck in boot loop I've already tried the abd reboot-bootloader and always fall in error: device not found., I hope someone notice my case. thanks
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
TheShadowMC said:
Hello, this happens when the system is actually corrupted
you may reflash stock then twrp then root again
or just get a custom recovery for your device
you must go in bootloader for stock rom or twrp for custom rom, and that's fine your phone just needs a rom and its good to go
good luck
Click to expand...
Click to collapse
but how can I boot it on bootloader? key combinations like vol+ and power or any combo doesn't work, only if someone can teach me how to boot it on bootloader or fastboot then there would be no problem for me, I don't know what to do now
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
TheShadowMC said:
Hello again, take out the bettery then put it back and use the bootloader combo
if it didnt work take out the bettery and flash through sp flash tool
nothing to worry about, i didnt notice that your phone can be flashed through sp flash, since it just requires the phone to be off
not really such a scary situation
Click to expand...
Click to collapse
will it work even if my device don't have battery on it?
kiltot24 said:
will it work even if my device don't have battery on it?
Click to expand...
Click to collapse
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
-Hope- said:
sp flash for my knowledge would work even when the battery is out it doesnt matter, just load the scatter press download button and connect the phone with battery off
good luck again:highfive:
Click to expand...
Click to collapse
in my case I can't flash even a recovery image using sp flash tool. any help? sorry if I look like an ignorant any way thanks for your help guys, I really appreciate
no no problem, however what's the problem ?
I'm trying to flash a custom recovery on it but it doesn't work, I'm trying to flash twrp, the one I've flash before, because I don't have the stock rom of my device so I'm doing the process partially. I'm aiming to flash twrp and then restore my saved back up.
Hello,
i think your device stock frimware is there on google, however when you try to flash what error does it give or what happens ?
It doesn't show any error message and not showing any progress at all. my device just blink showing that the battery is charging though the battery is not present.
if it didnt detect it try pressing the volume up or volume down to make sure while connected ( and download button is pressed
just blink until it reaches time out.
I'm sure that my cable is working, it works on other device. I already install all the drivers I need.
is there a way to stop my device from simultaneous booting? it appears to be detected on device manager but just for a few sec, then reboot and appear again.
ensure the ROM is loaded properly in the flash tool.
Switch off the phone and remove battery.
press the start button in the flash tool to initiate the ROM flashing process. The process will be in hold, waiting for the phone to accept the new firmware.
Now connect the phone to computer.
Try these. Press and hold VOLUME DOWN OR VOLUME UP OR POWER+VOLUME UP OR POWER+VOLUME DOWN. One of these should work and the flashing process should start.
can I obtain the stock rom from the same device? I have the same model and it works properly. I can't download the stock rom from mediafire it always fail due to poor internet connection so I'm looking for another way.
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
kiltot24 said:
I tried updating my driver then my device was recognized but when I flash the recovery image it displays 100% but in red color.
Click to expand...
Click to collapse
are you using the latest sp flash tool ?
yes thanks my device works fine now thank you for your help, the only problem now is how will I restore my device imei, it can be changed in engineer mode using at+ command but it be deleted again once conduct a factory reset in short it just set a temporary imei for my device, is there a way to change my device imei permanently?