im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Try wiping the Dalvik cache through recovery
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
kloud_ said:
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
yes im using the 2.0.2.A.0.24 version of 2.1. Tried wiping dalvik cache but still hang.
Any other suggestion?
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
Click to expand...
Click to collapse
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Click to expand...
Click to collapse
There is also a version for 2.1 as stated in the title and in the thread, but if they've flashed the wrong one then obviously it wont work.
wnazri said:
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
Click to expand...
Click to collapse
you might wanna try this using the xrecovery..
http://forum.xda-developers.com/showthread.php?t=900441
@XperiaX10User - oh yeah your right.. my bad..
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
I had this problem once.. I got stuck at SE White logo.. i tapped and went back to xRecovery, reinstalled free x10 and now works like a charm.
kloud_ said:
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
maybe i miss something when reading the post and as i mention earlier im a newbie.
Thanks everyone for all ur opinion and suggestion. i manage to install 2.2.1 beta3 using xRecovery. now i need to explore more before i crash my phone again
My mistake mate. It was just a tip.
Anyways make sure you backup the Rom before exploring ;-)
Enjoy your new Rom dude
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
stuck in boot screen too
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Partition? ext* system?
I think give xrec another shot. Keep pressing back key repeatedly when "SE" logo is displayed. Works for me everytime. Btw which ROM you on?
If that doesn't works then use flash tool 0.2.6 by bin4ry and use the guide by androxyde to re-install xRecovery.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
xKrisx said:
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
Click to expand...
Click to collapse
Yes, xRecovery has a factory reset option to format data on your phone.
Its a full wipe. You lose all you data.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
** Please hit "Thanks" of someone helps you in anyway.**
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Mate..u should try the steps provide by xKrisx
You cant access xrecovery bcoz you have formatted the sdcard
Sent from my X10i using XDA App
Related
I've tried to flash to new baseband for 3 days and it cannot go into flash mode. My x10i is from mobilicity in canada.Please help
Sent from my X10i using XDA App
Are you trying to flash to the .54 baseband, or from .54 down to .49 to use the gingerbread rom?
this video gives you a basic method of hot to enter flashmode
http://www.youtube.com/watch?v=wacg-dsx9ew
lawless_benji said:
Are you trying to flash to the .54 baseband, or from .54 down to .49 to use the gingerbread rom?
Click to expand...
Click to collapse
if yes, can it be done?
I'm on 49 wanting to go up
Sent from my X10i using XDA App
Moved to general as not android development
bern4d1 said:
if yes, can it be done?
Click to expand...
Click to collapse
Yes it can be done. Just keep the back key pressed while inserting usb cable when the phone is off. Takes a few tries. Took me one and a half hr to get it into flash mode the first time.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
Flashin
i managed to load a rom with the new baseband and it works fine until i reboot and then i get errors from gallery, market, settings etc but programs i installed from my backup are fine. I went to xrecovery and selected fix perm but it didn't help.
To all that replied to my 1st post, i say thank you.
run the sesus attaching your phone one time. it will install necessary driver. after that whenever you try to flash, when the system will asking for connect the fone,u need to turn off the fone & holding the back button,connect the fone.green led will be on.& you are on flash mode....
I had rooted x10. Now it is a brick. I've installed Anim Mod from market. I've set blurry effect and app asked to reboot m phone. After reboot it stucks on SONY ERICSSON text. Help!
ughhh this thread AGAIN?
Like the other hundred topics about this, use seus and reflash to stock
This is only way?
no, if you make backup you can reflash it, otherwise u must use seus
kabuki8888 said:
This is only way?
Click to expand...
Click to collapse
You can either use:
1. SEUS and reflash the SE official 2.1
2. Use flashtool.
3. If you created a backup using xRecovery, you can restore it.
No backup
You cant brick the x10 just shut down the phone press and hold back button insert usb and.tada you're in flash mode. Your data will be lost but hey phone will work again
Sent from my X10i using Tapatalk
Don't u know that X10 is like John Rambo or smthing. Can't be bricked. Just flash.
Sent from my X10i using XDA App
Hello,
I'm a little new to x10 and I tried installing Eternity 2 ROM,
after I installed it I had some problems with it, tried to boot into XRecovery and when I did it got stuck at the white SE logo.
Any suggestions ? thanks =)
xFading said:
Hello,
I'm a little new to x10 and I tried installing Eternity 2 ROM,
after I installed it I had some problems with it, tried to boot into XRecovery and when I did it got stuck at the white SE logo.
Any suggestions ? thanks =)
Click to expand...
Click to collapse
pressing BACK button some more time..
kaisan1 said:
pressing BACK button some more time..
Click to expand...
Click to collapse
As I said, it got stuck at the white SE logo no matter how many times I pressed the button.
Maybe after flashing should should reinstall xrecovery?
>>but i am not sure, about this...
I got some **** too, my current setting was the last SE Update with SEUS to my phone, then rooted, and xrecovery again.
I use "CM 6.1.3 V054 with BB 2.1.58 by Wolfbreak" there is nothing to flash,
only xrecovery actions needed (the last updates i made where completele withouth a PC - Files directly loaded from xda, booted to xrecovery, installed and after restoring apks with my backup root, work done)
>Sony Ericsson Xperia X10i with CM 6.1.3 V054 with BB 2.1.58 by Wolfbreak<-
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
Hope this helps and good luck
Sent from my X10i using XDA Premium App
take it easy bro,
just use the SEUS to go back to the stock rom and root again ,then reinstall busybox and xrecovery.that's what i did when facing this prob.
Before you do some drastic reflashing..I'd suggest manually copying all the files in the apk to /system/bin(if i remember the path correctly), changing their permissions, rebooting and trying again.
If this works, it might save you a whole lot of trouble.
My x10 is stuck in a boot loop after I flashed the ROM.
How do i stop this from happening? I really like the look of the ROM over my current one.
Please help.
EDIT: Managed to get freex10 ROM running. So I have a useable phone now.
flash baseband which is included in the package and you should be fine
what bb are you using?
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
Same Issue I think
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
You probably need to use flashtool to flash the .52 baseband fix. Unless you have .52 already.
If that doesnt work, try flashing 2.1 totally over again with flashtool.
Sent from my X10i using XDA Premium App
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
ChrisDude70 said:
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
Click to expand...
Click to collapse
Will send you some links on a second. Will post them here with guides too.
Flashtool:
http://forum.xda-developers.com/showthread.php?t=920746
The flashtool guide:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Sent from my X10i using XDA Premium App
To get out of the bootloop just flash back to 2.1 and start over again. And make sure to follow the instalation instructions given by the dev when flashing the rom.
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
ChrisDude70 said:
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
Click to expand...
Click to collapse
The file you use in flashtool is an .ftf file
Sent from my X10i using XDA Premium App
Then what do I do with a .zip?
yes, you DO flash the .zip file with xrecovery. step one, flash bb with flashtool, step two, start phone in xrecovery and flash .zip, reboot, and it should work.
Sent from my X10i using XDA Premium App
drearystate said:
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
Click to expand...
Click to collapse
first try SEUS that comes on your ROM( left click SE icon in 'my computer' install) if that one doesn't work, uninstall and install SEUS from SE site, but one of them will say 'repair'
Sent from my X10i using XDA Premium App
ps: make sure your phone is fully charged
Sent from my X10i using XDA Premium App
Yeah, that's what I did the first time.
I just tried it again. Same problem.
Phone turns on, boots, sits on home screen for a few seconds then restarts.
Why would this happen?
EDIT: I managed to check the baseband version int he few seconds the phone was on, it says it is unknown. Would this cause this problem?
http://forum.xda-developers.com/showthread.php?t=928343
The ftf files you need are on the second post. Just put the ftf file in the firmware section of the flashtool then flash it and follow the on screen instructions.
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
I tried that, It keeps telling me I have my old Cyanogen mod for 2.2 installed when I do it.
In the process of running SEUS, hopefully it puts me back to 2.1
Chris603 said:
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
Click to expand...
Click to collapse
Could that stop the rebooting?
ChrisDude70 said:
Could that stop the rebooting?
Click to expand...
Click to collapse
No, i dont think that is the cause of the rebooting cause ii get that a lot but the phone never reboots on me, what kernel are you on. Cause a lot of the custom kernels reboot when the screen is off or when you have the cpu up too high.
Hey,
I have an Sony Ericsson Xperia X10. I had Wolfbreaks TW Gingerbread V5 on it. When i tried to upgrade it to V6 it went wrong... After i flashed it and tried to reboot my phone, my phone didn't startup anymore. I only get the white Sony Ericsson text with a black background.
If someone could help me with this I'd be very thankful!! Sorry for my bad English.
DeathPixel.
unlocked bootloader
wipe data, wipe cache n wipe delvik cache??
or maybe u don have stock 2.3.3 n .71 baseband....
sorry if dis not helping... im a noob
I can't get in my recovery menu anymore =(. I had Wolfbreaks TW Gingerbread V5 and baseband .71.
Your atleast trying to help! Its no problem.
What happened? My phone suddenly started itself and works normally again?
Start from a scratch, 2.1, root, recocery and dessired 2.3 rom wuth 2.3.tft, hope it works out,
Maybe it just needed a longer first time boot after instaling the new rom i found that when i tried wb6 it was a long long first boot but fine afterwards.
Kieron
Sent from my x10i using xda premium
harissanja said:
Start from a scratch, 2.1, root, recocery and dessired 2.3 rom wuth 2.3.tft, hope it works out,
Click to expand...
Click to collapse
Right after it was booted i cleaned everything and reinstalled my prefered ROM.
kieronw3 said:
Maybe it just needed a longer first time boot after instaling the new rom i found that when i tried wb6 it was a long long first boot but fine afterwards.
Kieron
Sent from my x10i using xda premium
Click to expand...
Click to collapse
Well it took almost exactly 24 hours untill it booted suddenly. 24 hours seem a little too long to me... But you never know!