I've tried to flash to new baseband for 3 days and it cannot go into flash mode. My x10i is from mobilicity in canada.Please help
Sent from my X10i using XDA App
Are you trying to flash to the .54 baseband, or from .54 down to .49 to use the gingerbread rom?
this video gives you a basic method of hot to enter flashmode
http://www.youtube.com/watch?v=wacg-dsx9ew
lawless_benji said:
Are you trying to flash to the .54 baseband, or from .54 down to .49 to use the gingerbread rom?
Click to expand...
Click to collapse
if yes, can it be done?
I'm on 49 wanting to go up
Sent from my X10i using XDA App
Moved to general as not android development
bern4d1 said:
if yes, can it be done?
Click to expand...
Click to collapse
Yes it can be done. Just keep the back key pressed while inserting usb cable when the phone is off. Takes a few tries. Took me one and a half hr to get it into flash mode the first time.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
Flashin
i managed to load a rom with the new baseband and it works fine until i reboot and then i get errors from gallery, market, settings etc but programs i installed from my backup are fine. I went to xrecovery and selected fix perm but it didn't help.
To all that replied to my 1st post, i say thank you.
run the sesus attaching your phone one time. it will install necessary driver. after that whenever you try to flash, when the system will asking for connect the fone,u need to turn off the fone & holding the back button,connect the fone.green led will be on.& you are on flash mode....
Related
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Try wiping the Dalvik cache through recovery
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
kloud_ said:
Could you please mention your baseband as well. As the theme is meant for the 2.0.2.A.0.24 version of 2.1 only.
Hope this helps
Regards
kLouD
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
yes im using the 2.0.2.A.0.24 version of 2.1. Tried wiping dalvik cache but still hang.
Any other suggestion?
wnazri said:
im a newbie for android. i just installed Green Glow theme on my 2.1 using xRecovery and after reboot the phone it stuck at the SE boot screen. Try to repair using SEUS, PCC and remove sdcard also not solving the problem but i can log into xRecovery. Any suggestion?
Click to expand...
Click to collapse
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Niwei, if SEUS is not working, u might just have to FLASH ur phone again using the flasher made by B4nary.. find it in the other threads.. might help in ur reading.. Since ur already using xrecovery and ur phone is already rooted, try to flash beta3 un your phone then if u dont like 2.2, reflash using SEUS.. hope this helps..
Click to expand...
Click to collapse
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
yoh_ivan said:
mate,
Its clearly posted that this theme is for Beta3 only.. if ur using 2.1, then your not using Beta3 because its for 2.2 froyo by Z.. U might want to check our what u flash in ur phone before doing it..
Click to expand...
Click to collapse
There is also a version for 2.1 as stated in the title and in the thread, but if they've flashed the wrong one then obviously it wont work.
wnazri said:
i've been thinking to go for 2.2 but how? could you provide some links or steps for me bcoz i tried to flash using FlashTool made by Bin4ry but once i reboot and press the back button it will enter the xRecovery screen.
Click to expand...
Click to collapse
you might wanna try this using the xrecovery..
http://forum.xda-developers.com/showthread.php?t=900441
@XperiaX10User - oh yeah your right.. my bad..
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
I had this problem once.. I got stuck at SE White logo.. i tapped and went back to xRecovery, reinstalled free x10 and now works like a charm.
kloud_ said:
Wow... people actually go installing things on there cell without reading posts properly... ?!! :amazed:
Sorry didn't mean to be rude but you should read the post carefully first before installing themes and apk
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
Click to expand...
Click to collapse
maybe i miss something when reading the post and as i mention earlier im a newbie.
Thanks everyone for all ur opinion and suggestion. i manage to install 2.2.1 beta3 using xRecovery. now i need to explore more before i crash my phone again
My mistake mate. It was just a tip.
Anyways make sure you backup the Rom before exploring ;-)
Enjoy your new Rom dude
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
stuck in boot screen too
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Partition? ext* system?
I think give xrec another shot. Keep pressing back key repeatedly when "SE" logo is displayed. Works for me everytime. Btw which ROM you on?
If that doesn't works then use flash tool 0.2.6 by bin4ry and use the guide by androxyde to re-install xRecovery.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
xKrisx said:
Correct me if I am wrong. But doesnt Xrecovery have a Factory Reset option ?
Aside from that, I thought I had bricked my phone a week or so ago when Z released Beta 4. I could boot up to the SE Logo and go no further, couldnt even get into xrecovery. However, give this a shot, it worked for me to get it into flash mode so I could do a recovery on SEUS..
- Pop you battery out
- Connect USB Cord without batter in.
- Reinsert Batter while holding Back button
- The Screen should light up white for a split second but go back off.
- The Green Light at the top of the phone should stay on now
That should put you into Flash Mode for SEUS. The just do a recovery.
Yes, you will loose all of your information but hey, atleast you arn't buying another phone.
_____
Next time, read the post cleary and don't just think you know what your doing.
If the FW Version doesnt match you can lock your phone up pretty good.
If the Base Band doesn't match up, then you can mess up your Service and possibly put your phone into a repeating boot cycle.
Xperia x10
Blue Sparks v5
xKrisx Mod
Click to expand...
Click to collapse
Yes, xRecovery has a factory reset option to format data on your phone.
Its a full wipe. You lose all you data.
Regards
kLouD
Sent from my x10i_kLouD™ on zdzihu's 2.2.1 beta4 using xda App.
** Please hit "Thanks" of someone helps you in anyway.**
keelz said:
i formatted the sdcard and the partition system using xrecovery... then reboot but i am stuck in the boot screen... i can't access the xrecovery and the on/off doesnt work anymore... so in order to turn off the phone, i have to take the battery out. cannot connect to PCC and SEUS...
any help or there is no more hope for my phone
sorry for my noobism
xperia x10 mini pro
Click to expand...
Click to collapse
Mate..u should try the steps provide by xKrisx
You cant access xrecovery bcoz you have formatted the sdcard
Sent from my X10i using XDA App
hello yall
I just rooted my phone by the superoneclick method. And I tried to flas 2 different roms but they both keep rebooting. Am I doing anything wrong?
Buakaw89 said:
hello yall
I just rooted my phone by the superoneclick method. And I tried to flas 2 different roms but they both keep rebooting. Am I doing anything wrong?
Click to expand...
Click to collapse
1) are you on the right baseband
2) have you done a full wipe through xrecovery -cache,dalvik,battery stats
3) have you installed busybox
4) have you even got xrecovery
And the list could go on. So look at what i said and check everything because if both those roms didnt work, you must be the problem not doing it right
xperiax10mods said:
1) are you on the right baseband
2) have you done a full wipe through xrecovery -cache,dalvik,battery stats
3) have you installed busybox
4) have you even got xrecovery
And the list could go on. So look at what i said and check everything because if both those roms didnt work, you must be the problem not doing it right
Click to expand...
Click to collapse
Hello yes I installed busybox and xrecovery. I went into xrecovery by pressing the back button at the startscreen. I wiped my phone to factory setting. Wiped my cache, dalvik and battery stats. After that I installed a new rom through SD and I rebooted. But after 10 seconds it freezes and reboots.
Ive used my recovery to go back to fw 2.1 What am I doing wrong? The baseband (54) was right,
What's the ROM are you on? And what baseband? That will help us solve your problem.
Sent from my X10i using XDA Premium App
Mine is doing the same!, i flash the multi-touch generic firmware install root, install xrecovery, baseband on 49, install tripnmuiu 1.0.9 and it restarts after a couple of seconds...
xionation said:
Mine is doing the same!, i flash the multi-touch generic firmware install root, install xrecovery, baseband on 49, install tripnmuiu 1.0.9 and it restarts after a couple of seconds...
Click to expand...
Click to collapse
What is the ROM version 2.2 or 2.3?
Sent from my X10i using XDA Premium App
Voelker45 said:
What is the ROM version 2.2 or 2.3?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
im running the 2.2
You need baseband .54. Which you need flashtool to do so. You know how to do that right?
That's why it keeps rebooting.
Sent from my X10i using XDA Premium App
it worked for me. I wiped my phone including Dalvik and battery. Thanks guys
My x10 is stuck in a boot loop after I flashed the ROM.
How do i stop this from happening? I really like the look of the ROM over my current one.
Please help.
EDIT: Managed to get freex10 ROM running. So I have a useable phone now.
flash baseband which is included in the package and you should be fine
what bb are you using?
Sent from my X10 TripNMiUI-IRIS using XDA Premium App
Same Issue I think
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
You probably need to use flashtool to flash the .52 baseband fix. Unless you have .52 already.
If that doesnt work, try flashing 2.1 totally over again with flashtool.
Sent from my X10i using XDA Premium App
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
ChrisDude70 said:
Can someone link me a guide as to how to flash the ROM with flash tool?
I flashed the baseband with it but I used xrecovery for the ROM itself because I could not work out how to use the flash tool.
I'll try reflashing the baseband when I get home tonight.
Click to expand...
Click to collapse
Will send you some links on a second. Will post them here with guides too.
Flashtool:
http://forum.xda-developers.com/showthread.php?t=920746
The flashtool guide:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
Sent from my X10i using XDA Premium App
To get out of the bootloop just flash back to 2.1 and start over again. And make sure to follow the instalation instructions given by the dev when flashing the rom.
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
ChrisDude70 said:
I still can't work it out.
The ROM is in a .zip file and the flash tool doesent seem to be picking it
up and when I unzip it there are no selectable files.
Click to expand...
Click to collapse
The file you use in flashtool is an .ftf file
Sent from my X10i using XDA Premium App
Then what do I do with a .zip?
yes, you DO flash the .zip file with xrecovery. step one, flash bb with flashtool, step two, start phone in xrecovery and flash .zip, reboot, and it should work.
Sent from my X10i using XDA Premium App
drearystate said:
I think I am having the same issue but when my x10 boots it goes to unlock screen and then I have this loop with "The application ADW.Launcher(process.android.acore) has stopped unexpectedly. The device then flashes the Cynogen loading screen and goes back to the unlock screen where I get the same message and the same loop. My xrecovery doesnt work and I cant seem to get the phone to use the SE update manager because it also says its up to date and doesnt provide a repair option. Can anyone help with this? I dont care which android os I go to at this point as long as it will work.
Click to expand...
Click to collapse
first try SEUS that comes on your ROM( left click SE icon in 'my computer' install) if that one doesn't work, uninstall and install SEUS from SE site, but one of them will say 'repair'
Sent from my X10i using XDA Premium App
ps: make sure your phone is fully charged
Sent from my X10i using XDA Premium App
Yeah, that's what I did the first time.
I just tried it again. Same problem.
Phone turns on, boots, sits on home screen for a few seconds then restarts.
Why would this happen?
EDIT: I managed to check the baseband version int he few seconds the phone was on, it says it is unknown. Would this cause this problem?
http://forum.xda-developers.com/showthread.php?t=928343
The ftf files you need are on the second post. Just put the ftf file in the firmware section of the flashtool then flash it and follow the on screen instructions.
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
I tried that, It keeps telling me I have my old Cyanogen mod for 2.2 installed when I do it.
In the process of running SEUS, hopefully it puts me back to 2.1
Chris603 said:
With baseband unknown go to the app on your phone called dev tools then go to bad behaviour and crash system sever when the phone reboots you should have signal and baseband will no longer be unkown.
Click to expand...
Click to collapse
Could that stop the rebooting?
ChrisDude70 said:
Could that stop the rebooting?
Click to expand...
Click to collapse
No, i dont think that is the cause of the rebooting cause ii get that a lot but the phone never reboots on me, what kernel are you on. Cause a lot of the custom kernels reboot when the screen is off or when you have the cpu up too high.
Hi,
As of yesterday, just out of nowhere, my Xpiria mini started randomly rebooting itself in a loop...at first it happened once every few hours and then the phone went back to normal, but now it just happens non-stop, and i can't use the phone at all!
some background:
my phone was rooted and the bootloader unlocked, as a result of solving an overheating issue a few months ago..
so, at first i thought that maybe upgrading the software will solve the rebooting problem, but i couldn't install the upgrade version...i guess because i already messed with the phone in the past it won't let me upgrade it in a "normal" way (tried via pc-companion and via the phone itself).
anyway, i guess i have 2 questions...1. how do i solve the rebooting problem? 2. how do i upgrade the software?
(i don't know much about phones etc, so if you could give me a detailed step-by-step explanation it would be great, and would save many of my stupid questions
please help, my phone is completely useless at the moment...
Use flashtool and flash stock gingerbread or ics firmware. Take a look at the stickies for the firmware and guide about how to do it.
.:goutham:.
gouthamthemostwanted said:
Use flashtool and flash stock gingerbread or ics firmware. Take a look at the stickies for the firmware and guide about how to do it.
.:goutham:.
Click to expand...
Click to collapse
Did everything the guides said, upgraded to ICS which works great, with one "little" problem- the phone only works when connected to charger/pc...
the moment i disconnect it (even when fully charged) the screen goes black and nothing works...it vibrates once when pressing the power button, like it's turning on, but nothing happens...
Hello, Mr. After unlocking ur BT loader, u cant use pc companion for upgrading and degrading, it wont work properly, so use flashtool and every ting wil be fine
Sent from my WT19i using xda premium
stanlin salu said:
Hello, Mr. After unlocking ur BT loader, u cant use pc companion for upgrading and degrading, it wont work properly, so use flashtool and every ting wil be fine
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Hey, thanks for the reply...i upgraded to ICS using flashtool, didnt use pc companion...so i don't think that's the problem
Open the cwm recovery then go to advance & wipe delvik cache.
Then reboot.
Sent from my ST15i using xda premium
YBS14881 said:
Open the cwm recovery then go to advance & wipe delvik cache.
Then reboot.
Sent from my ST15i using xda premium
Click to expand...
Click to collapse
Wiping dalvik cache won't help, it does nothing, because dalvik cache will be rebuilt on every reboot anyway :good:
So is there any chance solving this or the phone is dead?? :crying:
starch11 said:
So is there any chance solving this or the phone is dead?? :crying:
Click to expand...
Click to collapse
So you are on ics right now, but it won't boot? Is there any vibration or nothing? Can you flash a custom kernel and enter cwm? Can you charge it?
mihahn said:
So you are on ics right now, but it won't boot? Is there any vibration or nothing? Can you flash a custom kernel and enter cwm? Can you charge it?
Click to expand...
Click to collapse
RIght now it's on ICS..it works fine, but ONLY when connected to a charger/usb..the moment i disconnect the cable it shuts off and won't boot at all, no vibration or anything...the moment i put the cable back in it starts normally and works well...
Just flash it with flashtool. Ics generic can be used for flash.
Sent from my ST15i using xda app-developers app
si josh said:
Just flash it with flashtool. Ics generic can be used for flash.
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
already did that...still won't boot unless connected to charger.
Are you really sure the battery is okay? Maybe this is the reason? Because if it's bricked up (it=the battery) you can only boot when the usb cable is inserted and you won't get any other reactions...
Maybe you can try another one from a friend and report?
mihahn said:
Are you really sure the battery is okay? Maybe this is the reason? Because if it's bricked up (it=the battery) you can only boot when the usb cable is inserted and you won't get any other reactions...
Maybe you can try another one from a friend and report?
Click to expand...
Click to collapse
I'll get another battery in a couple of days and see if it works...i hope it does, i really love this phone!
thanks for the help so far...
Okay I have seen loots of threads saying that my device got bricked and so on, well my X10 was working fine until I loaned it to a friend, I noticed that the phone would remove the kernel all by itself apparently if I remember correctly, then at one point I mistakenly in recovery formated every single partition, now idk if issue came after that but phone now every single time you try to turn it on it just vibrates once and the after 5sec it starts to vibrate and doesn't stop, it also foes this if you put it to charge after a min or so, also when you plug the phone up to a pc it always is in fastboot without even pressing the back button, now I found another thread from 2010 (dont have link cause im writing from phone) that you must root and downgrade all the way back down to 1.6, but all the files in that thread were hosted in places where the us took down the sites, so I tried using flashtool to flash the original ftf of AT&T 1.6 that shipped with phone and it finishes flashing but it stays with the same issue. Can someone help or is my first android phone dead? Thanks in advance.
Sent from my LT30p using xda app-developers app
Video of issue
X10 Doesn't boot: https://youtu.be/oACHcO27lPg
Sent from my LT30p using xda app-developers app
Did you try to flash 2.3 firmware?
Yeah I tried it but ill try it later tonight just to be safe, also anyone have a solution to why the new sus cant find firmwares for x10?
Sent from my LT30p using xda app-developers app
This is what is happening to me and all the links in that thread are dead
http://forum.xda-developers.com/showthread.php?t=1103343
TangVLD said:
Did you try to flash 2.3 firmware?
Click to expand...
Click to collapse
Yeah i tried it, no go for it.
bolillo said:
Yeah i tried it, no go for it.
Click to expand...
Click to collapse
hmm.. You can try some things.. on your risk
Charge your phone.
1. Flash X10_aZuZu_Kernel_Downgrade_Generic.ftf
Try to boot. If ok, flash 2.3.3 stock firmware
Or
2. Hotmail is dead.. so you may use this
Old SEUS and others files you can download from my link.
For example, use "UK Generic X10i Firmware (R1FA016)"
Or Working ftf file with Android 1.6 for XPERIA X10
P.S. I'll sent for you PM with key