Hello dear xda users.
Today since 1-2 hours ago something terrible happened. My X10i .. keeps rebooting at the "Sony Ericsson" startup.
History:
I updated to 2.2 Beta 4, but I forgot to update the kernel so the phone kept rebooting, but not at startup, only after a couple of minutes.
I flashed to the required kernel, but decided to go back to Beta 3 instead, and the same problem occured here too, also that the wifi and mobile network were out of function.
And I remembered that I had made an backup of my original version with xRecovery, so I restored the phone and tried to switch back to Beta 3 and this is when the **** happened..
Am I screwed?
Stuffs Ive tried:
* Flash the version back (cannot enter flash mode anymore) = fail
* Tried to make a factory reset through PC Companion (cannot enter flash mode) = fail
I need help guys, this phone is only 2 weeks old. I just want to cry, dunno what to do
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Freak174 said:
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Click to expand...
Click to collapse
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
rendeiro2005 said:
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
Click to expand...
Click to collapse
Thanks for the reply, but how am I supposed to flash if I cant get the green light (called flashmode?)
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
rendeiro2005 said:
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
Click to expand...
Click to collapse
Yea I already tried that out, without success..
Freak174 said:
Yea I already tried that out, without success..
Click to expand...
Click to collapse
i just remember something that`s basic
remove/install PCC & SEUS again you may have a problem with drivers
HAHAH I WAS PRESSING THE DAMN BUTTOM IN THE MIDDLE FOR CHRIST SAKE! HAHAHAHAHAAH
You know when you get so, what should I say.. scared of not being able to solve it, you get blind!
IM SO FUUUUCKING GLAD SORRY FOR THE F WORD BUT YEEEEEEAAAA
Lol... But good that you can go on again....
sent from my 2.2 X10
Related
Hi all. I have multiple problems in my x10i.it has 2.1 It was rooted and worked fine..few days ago I tried to wipe the phone and did the master reset via xrecovery ..after the restart it just hanged at the boot logo and xrecovery is not working from then....I wanted to update with SEUS via USB... but the phone is not connecting as well...What should I do? PLZ HELP ME GUYZ........
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
If SEUS/PCC doesn`t recognize your phone, remove them from PC and reinstall them.
You have an USB driver problem
ohm74 said:
Hi,
Seus doesn't recognize your x10 even if you hold back button while plugging usb (flash mode) ?
This week my x10 2.1 crashed (I suppose it was because of rooting with superoneclick without rebooting immediatly), and wasn't recognized by windows. It was in a loop turnig on/off and only putting off battery could turn it off really. Big Problem.
The only solution I found : putting off battery, pluggin usb cable, holding back button and putting on battery. Back button still hold (like flash mode) until seus recognize x10. Then it runs alone and install rom (after I rooted with flashtools and launched jit optimisation, witch increase truely x10 performances!).
Click to expand...
Click to collapse
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Take the phone with the warranty for repairing.
mistake_man said:
Probably seus not recognize your phone because you have a rooted and custom firmware in your x10 and xrecovery is not working because you did a reset and then you delete some files from your phone, you can reinstall it with the x10flashtool or to make a complete restore firmware whit the same x10flashtool
Click to expand...
Click to collapse
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
iMatth3w said:
Take the phone with the warranty for repairing.
Click to expand...
Click to collapse
I bought it from ebay ...no warrenty... think thats stupid :/
rumanbsl said:
nope, phone is not connecting in flash mood..i pulled of the battery and did as u said,,nothings working ......
Click to expand...
Click to collapse
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
rumanbsl said:
one more thing....i checked the device manager se drivers r working f9.....when i connect phone via usb cable the green light automatically turns on....even b4 i press back key
Click to expand...
Click to collapse
Well your usb is definitly working then as its glowin green?..
Are you sure you are doing it all right? It happened the same to me, and it ended I was pressing the wrong buttom (I knew which one was the correct one, but was blind cause I was scared that Ive broke it totally), a day later I noticed it and I was able to flash my phone.
However, read a guide and follow it step by step, reinstall everything and start from beginning maybe?
Or use the repair function with PC Companion
Hi! I had the same problem!
1. Search and download from this forum Flashtool 0.2.6
2. Install it.
3. Download from this forum one generic ROM (for exemple X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 )
4. Put the file in directory Flashtool/firmware
5. Launch X10flashtool.exe
6. DO NOT PUT THE USB CABLE IN THE PHONE
7.From option "flash select the desired ROM
8. Wait the program to begin(a picture will appear)
9. Pressing the back button, insert the usb cable.
10. Wait the flashing to begin and release the back button.
Follow instructions and WAIT around 5 minutes until flashing will complete
11. Send me two words if it helps you! Success!
ohm74 said:
Did you wait for at least 30 seconds before putting battery inside phone (to make sure clearing all memories? And sure you hold back button before, during and after?
Otherwise, what does happen if you press and hold volume button before turning on the phone (and keep volume button hold)?
Click to expand...
Click to collapse
I've did everything as u told.....no luck ! guess its the time to go to repair center...btw a guy from help center told me about software tampered,,!!out of luck
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?
Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!
Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
kobrn1 said:
Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
Click to expand...
Click to collapse
you didn't flash nAa's kernel, as instructed in the post where you got the ROM from.
thanks a lot, but u didn't help me at all, in this situation...
kobrn1 said:
thanks a lot, but u didn't help me at all, in this situation...
Click to expand...
Click to collapse
no, i didn't... how were you thinking of making a recovery in flashtool then?
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
kobrn1 said:
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
Click to expand...
Click to collapse
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Thanks will try that, than im comeing with the news..
SmG67 said:
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Click to expand...
Click to collapse
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
kobrn1 said:
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
Click to expand...
Click to collapse
You can try to enter flashmode by pressing HOME and POWER button at the same time, that will give it a hard reboot. As soon as the screen goes black (backlight off too), press the back-button. Do this with the usb-cable already attached to your phone and your pc. Ofcourse you do this only when flashtool or SEUS/PC Companion show you the popup to connect your phone in flashmode.
I had the same problem with my E10i, and that home+power than back b. combo helped! :good:
My cell was stucked on bootlogo, but in E10i (X10mini) you couln't pull out the battery just like that, so if you whant to SEUS repair your phone, you must have the phone turned of completly, but i couldn't do that. So i start SEUS whait till i get to the point when he whant your phone connected, then i press home+power button, managed somehow to plug in USB c. than press the back button and releas the home+power buttons. The rest is history...seus recognize the phone...download the files...and repair my phone.
Good luck mate! Try it! :fingers-crossed:
Okay, i've made it.
Shortly, the 1rst problem was the windows 8, ive reinstalld the 7th and SEUS on it, then easily selected the phonetype from the list, than holding back button, than connecting the cable, easy light clean install and thats it.
Thanks guys.
Hello!
I read for hours now, bot no luck
I flashed my x10a with flashtool with generic rom.
After flash, as the flashtool says, just turned off and on the phone.
But nothing happened(green led blink one and do a sort vibration, thats all..)
no logo, no sound nothing happens.
I tried to reflash again, but windows says: Cannot recognize the device
In the control panel device manager show "unknown device".
Because of this , cannot reflash with the tool, because it's waiting for the recognized device too..
when i press the back and connect the cable, the green lighting for a minute , and turns of..
Yes, i have the correct drivers(as you can see i flashed before).
Help me guyz, please, if U can
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Try flashing back to stock non root. It may suck but at least you'll have a starting point. It'll read. Ust make sure you have newest flashtool. Just had the same problem with my x10. Its still havin troubles tho.
Stuck using xda app-developers app on a motorola backflip.
THeLogiC said:
Does it go into flashmode?
Did you try flashing it regardless of unknown device in windows?
Sent from my X10
Click to expand...
Click to collapse
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
gyurc said:
how Can i reflash if the all the flash programs waiting for the device?
it must be connected as USB emc or flash device?
Click to expand...
Click to collapse
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
luck_shawn said:
Try removing battery, insert usb cable, insert battery while holding back button. I spent 8 hours last night just trying to get back to stock. Your phone is semi bricked. Its a pain in the ass but it eventually works.
Stuck using xda app-developers app from motorola backflip
Click to expand...
Click to collapse
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
gyurc said:
for sure: i just do the battery pull out in method, and if pray enough, pc will recognize one time?
Click to expand...
Click to collapse
Hey go back to stock 1st then try rooting later,
1) launch pc companion
2) select support zone
3) now select phone software update
4) then click on repair phone
Now software will download the stock ROM along with stock kernel..
When the software asks you to connect in flash mode, do the following
1) turn off the phone
2) Remove battery
3) Connect the USB cable to phone as well as to the laptop
4) Place the battery back while holding down the back button (3rd button from the left)
5) Green light should glow and the stock ROM and kernel should be flashed automatically..
When it's done you should have a stock unrooted X10, if you want then flash custom Rom after rooting it, be sure to unlock the boot loader if u want to flash custom kernel... Good luck
Sent from my X10S using xda app-developers app
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
gyurc said:
yes, green light glow, but with "unknown device" the software update wont start
flashtool cant be done either.
can i cheat a liitle bit somehow?
i tried to replace the driver in the device manager, but no luck
Click to expand...
Click to collapse
what do you mean by flashtool cant be done?
try this:
1) open flashtool
2) press the flash button and select any stock ftf firmware
3) now after pop up comes to connect phone in flashmode---- remove battery, connect the phone via usb, and lastly pressing back button insert battery simultaneously.
Now the flashing should start hopefully.
if this doesnt work please post the error you get in flashtool
i have the same problem with my phone only mine is x10i i reflashed 2.3.3. ftf ..like 7..8 times ..and still not working..btw smth the flashtool give me some error ..and other times works and says that the phone was flashed ..but phone still only 1 virbate and 1 blink green light now i am kinda bumped because i repair it once ...and now has the same problem
hello all!
thanks for all help.
What happened:
Hopefully i found the USB port have error. If is stand in half leg, not breathing for a minute and beg for christmas the connection made successfully, and first the SEUS , after the flashtool can recognize the phone well.
Now the phone working perfectly and going to my friend's service for fix the usb port problem.