Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
kobrn1 said:
Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
Click to expand...
Click to collapse
you didn't flash nAa's kernel, as instructed in the post where you got the ROM from.
thanks a lot, but u didn't help me at all, in this situation...
kobrn1 said:
thanks a lot, but u didn't help me at all, in this situation...
Click to expand...
Click to collapse
no, i didn't... how were you thinking of making a recovery in flashtool then?
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
kobrn1 said:
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
Click to expand...
Click to collapse
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Thanks will try that, than im comeing with the news..
SmG67 said:
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Click to expand...
Click to collapse
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
kobrn1 said:
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
Click to expand...
Click to collapse
You can try to enter flashmode by pressing HOME and POWER button at the same time, that will give it a hard reboot. As soon as the screen goes black (backlight off too), press the back-button. Do this with the usb-cable already attached to your phone and your pc. Ofcourse you do this only when flashtool or SEUS/PC Companion show you the popup to connect your phone in flashmode.
I had the same problem with my E10i, and that home+power than back b. combo helped! :good:
My cell was stucked on bootlogo, but in E10i (X10mini) you couln't pull out the battery just like that, so if you whant to SEUS repair your phone, you must have the phone turned of completly, but i couldn't do that. So i start SEUS whait till i get to the point when he whant your phone connected, then i press home+power button, managed somehow to plug in USB c. than press the back button and releas the home+power buttons. The rest is history...seus recognize the phone...download the files...and repair my phone.
Good luck mate! Try it! :fingers-crossed:
Okay, i've made it.
Shortly, the 1rst problem was the windows 8, ive reinstalld the 7th and SEUS on it, then easily selected the phonetype from the list, than holding back button, than connecting the cable, easy light clean install and thats it.
Thanks guys.
Related
Hello dear xda users.
Today since 1-2 hours ago something terrible happened. My X10i .. keeps rebooting at the "Sony Ericsson" startup.
History:
I updated to 2.2 Beta 4, but I forgot to update the kernel so the phone kept rebooting, but not at startup, only after a couple of minutes.
I flashed to the required kernel, but decided to go back to Beta 3 instead, and the same problem occured here too, also that the wifi and mobile network were out of function.
And I remembered that I had made an backup of my original version with xRecovery, so I restored the phone and tried to switch back to Beta 3 and this is when the **** happened..
Am I screwed?
Stuffs Ive tried:
* Flash the version back (cannot enter flash mode anymore) = fail
* Tried to make a factory reset through PC Companion (cannot enter flash mode) = fail
I need help guys, this phone is only 2 weeks old. I just want to cry, dunno what to do
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Freak174 said:
Bump! No one?
Also tried to pull out battery while the phone connected with usb, pressing back key and inserting key.
I have a thought, maybe its that my phone isnt being recognized by the computer due to problem with USB drivers. Does any1 know how I can manually install it?
Click to expand...
Click to collapse
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
rendeiro2005 said:
at that hour no...ano one LOL i was sleeping LOL
Please flash ypur phone with SEUS or PCC or even better with THIS tool.
If you need help with flashtool go HERE
On Flashtool thread download you FW (X10i Generic)
Using Flashtool you were able (after flash) to root, install latest xRecovery, etc.
Hope it helps
Click to expand...
Click to collapse
Thanks for the reply, but how am I supposed to flash if I cant get the green light (called flashmode?)
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
rendeiro2005 said:
plug usb to phone
plug usb to pc
remove battery from phone
wait 10 sec.
press and hold back button
insert batery while holding
see what happens...
Click to expand...
Click to collapse
Yea I already tried that out, without success..
Freak174 said:
Yea I already tried that out, without success..
Click to expand...
Click to collapse
i just remember something that`s basic
remove/install PCC & SEUS again you may have a problem with drivers
HAHAH I WAS PRESSING THE DAMN BUTTOM IN THE MIDDLE FOR CHRIST SAKE! HAHAHAHAHAAH
You know when you get so, what should I say.. scared of not being able to solve it, you get blind!
IM SO FUUUUCKING GLAD SORRY FOR THE F WORD BUT YEEEEEEAAAA
Lol... But good that you can go on again....
sent from my 2.2 X10
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
XTacDK said:
I just trying to flash the nAa 6 kernel, it says at this finished. Afteri reboot my phone, i get kerne nAa6 logo. And i just failed at go to recovery and... i hace black screen and the SE Animation (purple color) i think i bricked it.. help, me programs and flashtool cant find my phone.. :/
Click to expand...
Click to collapse
restore your phone via SEUS from pc companion it will revert your kernel to stock and install the stock rom
Don't worry, I did the same thing the first time I tried to install Zombie Panic. Download the Sony Ercisson Update Service from here, insatll it on your PC and follow the instructions to install (even if it says you have the latest version). It'll take you back to Stock ROM and your phone will boot.
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
XTacDK said:
but.. PC Companion can find my phone but it wants to connect it in Android (and i cant go to android) so... :/
Click to expand...
Click to collapse
you should start the update process while the phone is disconnected and press repair then when asked connect the phone while you are pressing the back key to connect via flash mode.
Wait.. but i choose the reprair phone option and now it trying to reprair it, i just believe, at this will save my phone
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
XTacDK said:
and i just stuck connecting... i cant go to flash mode, i dont know why... i have idea: Take the battery off and turn phone again... but how to do this? :/
Click to expand...
Click to collapse
for mini you can't take the battery out
just turn off the phone for 5 seconds press the back key and connect the phone to the pc it should the start the repair via flash mode
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
XTacDK said:
yeah, yeh.. but this is the problem, that i cant turn phone off... :/
Click to expand...
Click to collapse
mmm try to flash a stock kernel from the forum on this link via flashtool
http://forum.xda-developers.com/showthread.php?t=1254225
and then update via SEUS it should work...
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
XTacDK said:
problem is at flashtool not find my phone... :/ i think at i must send phone to reprair... :/
Click to expand...
Click to collapse
well the only way to remove the battery of x10 mini is to disassemble it so send it for repair is better.
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
well man this is not the worst! i have now while talking to you the worst brick! i crashed my bootloader and i can't even flash my stock kernel!
i cant do this too,,, But i think if i restart the phone, so i see kernel nAa 6 logo and i will install mCM7! I must be optimist, cause i want to cry now ;D
XTacDK said:
WHY i all the time have the worrest brick?! WHY...
I try to take this battery off, but i need to find good tools for that..
Click to expand...
Click to collapse
Prepare SEUS on repair mode, until message to connect phone.
Press and hold power button, then press home button (don't release power button) and wait phone off. press and hold back button then connect the usb cable.
thank you!!!!you saved my phone~! Now can install mCM7.... thank you!!!
I was tryin to install MiniCM7 and during my noobish attempt I pretty much deleted everything on my phone. Factory reset and such. And I attempted to fix by rebooting the phone but now all I get is the Sony Ericsson Logo and when I try to turn the damned thing off it turns back on. I tried SEUS but even after quickly hitting back and plugin the usb cable after Home+Back+Power no dice. Can anybody out there help this desperate noob soul :c
Cant you pull out the battery connector underneath the rubber bit next to the camera to turn it off??
Sent from my U20i using xda premium
Battery Disconnected What now?
Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!
Guys, i was upgrading the ROM but this time i used this software, UNIFLASH , it showed some cmd windows, later phone automatically booted to cwm, and then turned off! since then its not turning on neither blinking any LED! guys, please show me a ray , help me! phone is not getting recognized by flashtool either :'( and same with seus
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
realfelix said:
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
Click to expand...
Click to collapse
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
bhuvangaur said:
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
Click to expand...
Click to collapse
have you tried the fastboot method, it´s in android development, "all you need to know..."
try to flash official stock fw like .452 or .45 with flashtool..try to connect the phone in flashmode....hopefully everything will be alright...
PEACE
guys, phone is not able to boot in any mode, it be fastboot or flashmode! its completely dead thats what i meant earlier. After a lot of researching the whole night, i was able to figure out that the bootloader is that the UNIFLASH corrupted the bootloader. So how to fix that?
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
mharckk said:
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
Click to expand...
Click to collapse
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
bhuvangaur said:
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
Click to expand...
Click to collapse
Go to repair center or phone shop! These guys know how to rewrite ur bootloader through JTAG! Don't worry, u'll get it back once it's done!
Sent From my Lt26i, Hit thank whenever u like!
I think you hard bricked your device... Go to service centre ...
Sent from my LT22i using xda premium
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
PS, since the company is no more ericsson based, new service center are SONY one only, where all sony products are welcomed, really good service center now! earlier it was sh*tty since years! i loved the experience this time
bhuvangaur said:
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
Click to expand...
Click to collapse
would you please enplane what is JTAG and how it works ?
Had the same problem yesterday!
Maybe a noob advice but here what was my mistake: after switch off the phone with volume up, wait for like 30 second before trying to connect in flash mode. Though my phone was dead but just had to wait a little bit before trying the flash mode. Flashtool heal it!
Sorry for my poor english, I'm french and this is my first post, but I follow xda since a long time!
Bye!
Napolee said:
would you please enplane what is JTAG and how it works ?
Click to expand...
Click to collapse
It a type of connector that is use to connect directly to the phone mainboard. It use to transfer some specific data such as bootloader!
Sent From my Lt26i, Hit thank whenever u like!
this is hilarious!!! a replacement! brand new xperia s! yay!
Trying to Survive my LT26i
I have rooted my phone
put recovery and flashed my rom to xxperience
so everything was ok
using for 2days
so i saw how to overclocked to 1.8ghz and flash via cwm the kernel
after restart from cwm not either the screen turn on
just green light when i put cable on
and when i tried to flash via flash tool given error for error
so i done as say here to hold power + volume up, and the same
so i waited for a little time and try again and its flashing now...
hope it works
Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)
narciseduard said:
Hello. I`m new here to xda-dev and i kinda need you help. I have a sony xperia u device, and today i tried to get its factory settings back. It restarted normally, but then it blocked. I waited several minutes and nothing happend. I removed the battery and tried to reopen it. It showed me Sony logo, Xperia, then blank screen, and restarted again. It keeps doing that, without opening for good. I tried to repair it with sony companion, but i cant get it connected due the fact it still restarting and keep disconecting from pc. What shall i do?
(sorry for my poor english)
Click to expand...
Click to collapse
When you connect it in fastboot mode it disconnect?
Angristan said:
When you connect it in fastboot mode it disconnect?
Click to expand...
Click to collapse
You mean lock button and -vol ?
EDIT: I connected again my phone to pc, and tried to open it with vol+ and same problem happend, still restarting without go on for good.
Not even opening fastboot.
narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
Just flash official ftf back with vol down. No need to press power button when you're booting to flash mode or fastboot mode. Just press vol + (fastboot) or vol - (flash) and plug in USB.
Sent from my ST25i using Tapatalk 2
narciseduard said:
Not even opening fastboot.
Click to expand...
Click to collapse
I did that, it flashed a green light for few secs, and then it went charging. No menu opened.
I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.
narciseduard said:
I can hear the sounds from my laptop when i try to conect it, to view that menu, but it disconects after a few seconds.
Click to expand...
Click to collapse
Did you install flashmode driver from flashtool\drivers directoty?
What windows version you have?
install proper drivers for your window and to stop the bootloop hold power button and volume up key it will vibrate once then will vibrate thric again and it will poweroff your device
I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l
narciseduard said:
I finnaly managed to to conect my phone to pc, but emma tells me that my phone is locked and i dont know how to unlock it, because it can turn on. What i do now? :l
Click to expand...
Click to collapse
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?
ChikeD said:
What is it that you want to do?
Flashing the formware does not require unlocking the phoen.
Which lock is it SIM or bootloader?
Click to expand...
Click to collapse
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.
narciseduard said:
It said that SIM is blocked. And my problem is in the 1st post. My doesnt come up anymore. It just shows me Soy and Xperia logo, then switch off, and keeps doing that, without going on for good.
Click to expand...
Click to collapse
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS
ChikeD said:
First shut it down, press power + volume down until you feel 3 vibrations (about 10 seconds)m if not take out the battery for a minute.
Download flashtool install and open it and connect in flash mode. It's wither volume down and connecting to pc or colume down, I am not sure about XU. If it shows it's connecting in flash mode and stay in this mode for about 45 seconds you can repair with PC Companion or flash with SUS
Click to expand...
Click to collapse
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.
narciseduard said:
I dont have to shut it on cuz it aint go on lol. It stays on on flash mod, but when i open sony companion to fix it, it tells me to remove the batter and put it back. But if i dont open it in flash mode, it never comes up, and its connecting and disconnecting from pc in 5 secs.
Click to expand...
Click to collapse
You wan't to fix it or not? it's on boot loop not shut off, shut it off.
ChikeD said:
You wan't to fix it or not? it's on boot loop not shut off, shut it off.
Click to expand...
Click to collapse
I think i finnaly managed to fix it. I downloaded SUS and fallowed the steps. Now i`m waiting for the phone to come up.
Meanwhile.
It works !!!! Thank you so much for your help, i cant say how much i`m greatful to you! Thank you ! So it worked with SUS. Thanks everyone for your time and help !